Commit 93385546 authored by Anson Huang's avatar Anson Huang Committed by Shawn Guo

ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs

On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and
sw2 supplies vdd3p0 LDO, this patch assigns corresponding power
supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log:

vdd1p1: supplied by regulator-dummy
vdd3p0: supplied by regulator-dummy
vdd2p5: supplied by regulator-dummy

With this patch, the power supply is more accurate:

vdd1p1: supplied by VGEN5
vdd3p0: supplied by SW2
vdd2p5: supplied by VGEN5
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 43f1322b
......@@ -745,6 +745,18 @@ &reg_soc {
vin-supply = <&sw1c_reg>;
};
&reg_vdd1p1 {
vin-supply = <&vgen5_reg>;
};
&reg_vdd3p0 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&vgen5_reg>;
};
&snvs_poweroff {
status = "okay";
};
......
......@@ -701,7 +701,7 @@ anatop: anatop@20c8000 {
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
regulator-1p1 {
reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
......@@ -716,7 +716,7 @@ regulator-1p1 {
anatop-enable-bit = <0>;
};
regulator-3p0 {
reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
......@@ -731,7 +731,7 @@ regulator-3p0 {
anatop-enable-bit = <0>;
};
regulator-2p5 {
reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment