staging: r8188eu: Add files for new driver - part 27

This commit adds files include/rtw_ht.h, include/rtw_io.h,
include/rtw_ioctl.h, include/rtw_ioctl_rtl.h, include/rtw_ioctl_set.h,
include/rtw_iol.h, and include/rtw_led.h.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/include/rtw_ht.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_HT_H_
+#define _RTW_HT_H_
+
+#include <osdep_service.h>
+#include "wifi.h"
+
+struct ht_priv {
+	u32	ht_option;
+	u32	ampdu_enable;/* for enable Tx A-MPDU */
+	u32	tx_amsdu_enable;/* for enable Tx A-MSDU */
+	u32	tx_amdsu_maxlen; /*  1: 8k, 0:4k ; default:8k, for tx */
+	u32	rx_ampdu_maxlen; /* for rx reordering ctrl win_sz,
+				  * updated when join_callback. */
+	u8	bwmode;/*  */
+	u8	ch_offset;/* PRIME_CHNL_OFFSET */
+	u8	sgi;/* short GI */
+
+	/* for processing Tx A-MPDU */
+	u8	agg_enable_bitmap;
+	u8	candidate_tid_bitmap;
+
+	struct rtw_ieee80211_ht_cap ht_cap;
+};
+
+#endif	/* _RTL871X_HT_H_ */

drivers/staging/rtl8188eu/include/rtw_ioctl.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_IOCTL_H_
+#define _RTW_IOCTL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+
+#ifndef OID_802_11_CAPABILITY
+	#define OID_802_11_CAPABILITY	0x0d010122
+#endif
+
+#ifndef OID_802_11_PMKID
+	#define OID_802_11_PMKID	0x0d010123
+#endif
+
+
+/*  For DDK-defined OIDs */
+#define OID_NDIS_SEG1	0x00010100
+#define OID_NDIS_SEG2	0x00010200
+#define OID_NDIS_SEG3	0x00020100
+#define OID_NDIS_SEG4	0x01010100
+#define OID_NDIS_SEG5	0x01020100
+#define OID_NDIS_SEG6	0x01020200
+#define OID_NDIS_SEG7	0xFD010100
+#define OID_NDIS_SEG8	0x0D010100
+#define OID_NDIS_SEG9	0x0D010200
+#define OID_NDIS_SEG10	0x0D020200
+
+#define SZ_OID_NDIS_SEG1	23
+#define SZ_OID_NDIS_SEG2	3
+#define SZ_OID_NDIS_SEG3	6
+#define SZ_OID_NDIS_SEG4	6
+#define SZ_OID_NDIS_SEG5	4
+#define SZ_OID_NDIS_SEG6	8
+#define SZ_OID_NDIS_SEG7	7
+#define SZ_OID_NDIS_SEG8	36
+#define SZ_OID_NDIS_SEG9	24
+#define SZ_OID_NDIS_SEG10	19
+
+/*  For Realtek-defined OIDs */
+#define OID_MP_SEG1		0xFF871100
+#define OID_MP_SEG2		0xFF818000
+
+#define OID_MP_SEG3		0xFF818700
+#define OID_MP_SEG4		0xFF011100
+
+#define DEBUG_OID(dbg, str)						\
+	if ((!dbg)) {							\
+		RT_TRACE(_module_rtl871x_ioctl_c_, _drv_info_,		\
+			 ("%s(%d): %s", __func__, __line__, str));	\
+	}
+
+enum oid_type {
+	QUERY_OID,
+	SET_OID
+};
+
+struct oid_funs_node {
+	unsigned int oid_start; /* the starting number for OID */
+	unsigned int oid_end; /* the ending number for OID */
+	struct oid_obj_priv *node_array;
+	unsigned int array_sz; /* the size of node_array */
+	int query_counter; /* count the number of query hits for this segment */
+	int set_counter; /* count the number of set hits for this segment */
+};
+
+struct oid_par_priv {
+	void		*adapter_context;
+	NDIS_OID	oid;
+	void		*information_buf;
+	u32		information_buf_len;
+	u32		*bytes_rw;
+	u32		*bytes_needed;
+	enum oid_type	type_of_oid;
+	u32		dbg;
+};
+
+struct oid_obj_priv {
+	unsigned char	dbg; /*  0: without OID debug message
+			      *  1: with OID debug message */
+	int (*oidfuns)(struct oid_par_priv *poid_par_priv);
+};
+
+#if defined(_RTW_MP_IOCTL_C_)
+static int oid_null_function(struct oid_par_priv *poid_par_priv) {
+	_func_enter_;
+	_func_exit_;
+	return NDIS_STATUS_SUCCESS;
+}
+#endif
+
+extern struct iw_handler_def  rtw_handlers_def;
+
+int drv_query_info(struct  net_device *miniportadaptercontext, NDIS_OID oid,
+		   void *informationbuffer, u32 informationbufferlength,
+		   u32 *byteswritten, u32 *bytesneeded);
+
+int drv_set_info(struct  net_device *MiniportAdapterContext,
+		 NDIS_OID oid, void *informationbuffer,
+		 u32 informationbufferlength, u32 *bytesread,
+		 u32 *bytesneeded);
+
+extern int ui_pid[3];
+
+#endif /*  #ifndef __INC_CEINFO_ */

drivers/staging/rtl8188eu/include/rtw_ioctl_rtl.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _RTW_IOCTL_RTL_H_
+#define _RTW_IOCTL_RTL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+/*  oid_rtl_seg_01_01 ************** */
+int oid_rt_get_signal_quality_hdl(struct oid_par_priv *poid_par_priv);/* 84 */
+int oid_rt_get_small_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_middle_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_large_packet_crc_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_retry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_rx_retry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_rx_total_packet_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_beacon_ok_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_tx_beacon_err_hdl(struct oid_par_priv *poid_par_priv);
+
+int oid_rt_pro_set_fw_dig_state_hdl(struct oid_par_priv *poid_par_priv);/* 8a */
+int oid_rt_pro_set_fw_ra_state_hdl(struct oid_par_priv *poid_par_priv);	/* 8b */
+
+int oid_rt_get_rx_icv_err_hdl(struct oid_par_priv *poid_par_priv);/* 93 */
+int oid_rt_set_encryption_algorithm_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_ap_ip_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channelplan_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_channelplan_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_preamble_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_bcn_intvl_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_dedicate_probe_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_total_tx_bytes_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_total_rx_bytes_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_current_tx_power_level_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_enc_key_mismatch_count_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_enc_key_match_count_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channel_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_hardware_radio_off_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_key_mismatch_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_supported_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_channel_list_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_scan_in_progress_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_forced_data_rate_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_wireless_mode_for_scan_list_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_get_bss_wireless_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_scan_with_magic_packet_hdl(struct oid_par_priv *poid_par_priv);
+
+/*   oid_rtl_seg_01_03 section start ************** */
+int oid_rt_ap_get_associated_station_list_hdl(struct oid_par_priv *priv);
+int oid_rt_ap_switch_into_ap_mode_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_ap_supported_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_ap_set_passphrase_hdl(struct oid_par_priv *poid_par_priv);
+
+/*  oid_rtl_seg_01_11 */
+int oid_rt_pro_rf_write_registry_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_pro_rf_read_registry_hdl(struct oid_par_priv *poid_par_priv);
+
+/*   oid_rtl_seg_03_00 section start ************** */
+int oid_rt_get_connect_state_hdl(struct oid_par_priv *poid_par_priv);
+int oid_rt_set_default_key_id_hdl(struct oid_par_priv *poid_par_priv);
+
+#endif

drivers/staging/rtl8188eu/include/rtw_ioctl_set.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_IOCTL_SET_H_
+#define __RTW_IOCTL_SET_H_
+
+#include <drv_types.h>
+
+
+typedef u8 NDIS_802_11_PMKID_VALUE[16];
+
+u8 rtw_set_802_11_add_key(struct adapter *adapt, struct ndis_802_11_key *key);
+u8 rtw_set_802_11_authentication_mode(struct adapter *adapt,
+				      enum ndis_802_11_auth_mode authmode);
+u8 rtw_set_802_11_bssid(struct adapter*adapter, u8 *bssid);
+u8 rtw_set_802_11_add_wep(struct adapter *adapter, struct ndis_802_11_wep *wep);
+u8 rtw_set_802_11_disassociate(struct adapter *adapter);
+u8 rtw_set_802_11_bssid_list_scan(struct adapter*adapter,
+				  struct ndis_802_11_ssid *pssid,
+				  int ssid_max_num);
+u8 rtw_set_802_11_infrastructure_mode(struct adapter *adapter,
+				      enum ndis_802_11_network_infra type);
+u8 rtw_set_802_11_remove_wep(struct adapter *adapter, u32 keyindex);
+u8 rtw_set_802_11_ssid(struct adapter *adapt, struct ndis_802_11_ssid *ssid);
+u8 rtw_set_802_11_remove_key(struct adapter *adapt,
+			     struct ndis_802_11_remove_key *key);
+u8 rtw_validate_ssid(struct ndis_802_11_ssid *ssid);
+u16 rtw_get_cur_max_rate(struct adapter *adapter);
+int rtw_set_scan_mode(struct adapter *adapter, enum rt_scan_type scan_mode);
+int rtw_set_channel_plan(struct adapter *adapter, u8 channel_plan);
+int rtw_set_country(struct adapter *adapter, const char *country_code);
+int rtw_change_ifname(struct adapter *padapter, const char *ifname);
+
+#endif

drivers/staging/rtl8188eu/include/rtw_iol.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_IOL_H_
+#define __RTW_IOL_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define IOREG_CMD_END_LEN	4
+
+struct ioreg_cfg {
+	u8	length;
+	u8	cmd_id;
+	__le16	address;
+	__le32	data;
+	__le32  mask;
+};
+
+enum ioreg_cmd {
+	IOREG_CMD_LLT		= 0x01,
+	IOREG_CMD_REFUSE	= 0x02,
+	IOREG_CMD_EFUSE_PATH	= 0x03,
+	IOREG_CMD_WB_REG	= 0x04,
+	IOREG_CMD_WW_REG	= 0x05,
+	IOREG_CMD_WD_REG	= 0x06,
+	IOREG_CMD_W_RF		= 0x07,
+	IOREG_CMD_DELAY_US	= 0x10,
+	IOREG_CMD_DELAY_MS	= 0x11,
+	IOREG_CMD_END		= 0xFF,
+};
+
+struct xmit_frame *rtw_IOL_accquire_xmit_frame(struct adapter *adapter);
+int rtw_IOL_append_cmds(struct xmit_frame *xmit_frame, u8 *IOL_cmds,
+			u32 cmd_len);
+int rtw_IOL_append_LLT_cmd(struct xmit_frame *xmit_frame, u8 page_boundary);
+int rtw_IOL_exec_cmds_sync(struct adapter  *adapter,
+			   struct xmit_frame *xmit_frame, u32 max_wating_ms,
+			   u32 bndy_cnt);
+bool rtw_IOL_applied(struct adapter  *adapter);
+int rtw_IOL_append_DELAY_US_cmd(struct xmit_frame *xmit_frame, u16 us);
+int rtw_IOL_append_DELAY_MS_cmd(struct xmit_frame *xmit_frame, u16 ms);
+int rtw_IOL_append_END_cmd(struct xmit_frame *xmit_frame);
+
+void read_efuse_from_txpktbuf(struct adapter *adapter, int bcnhead,
+			      u8 *content, u16 *size);
+
+int _rtw_IOL_append_WB_cmd(struct xmit_frame *xmit_frame, u16 addr,
+			   u8 value, u8 mask);
+int _rtw_IOL_append_WW_cmd(struct xmit_frame *xmit_frame, u16 addr,
+			   u16 value, u16 mask);
+int _rtw_IOL_append_WD_cmd(struct xmit_frame *xmit_frame, u16 addr,
+			   u32 value, u32 mask);
+int _rtw_IOL_append_WRF_cmd(struct xmit_frame *xmit_frame, u8 rf_path,
+			    u16 addr, u32 value, u32 mask);
+#define rtw_IOL_append_WB_cmd(xmit_frame, addr, value, mask)		\
+	_rtw_IOL_append_WB_cmd((xmit_frame), (addr), (value) ,(mask))
+#define rtw_IOL_append_WW_cmd(xmit_frame, addr, value, mask)		\
+	_rtw_IOL_append_WW_cmd((xmit_frame), (addr), (value),(mask))
+#define rtw_IOL_append_WD_cmd(xmit_frame, addr, value, mask)		\
+	_rtw_IOL_append_WD_cmd((xmit_frame), (addr), (value), (mask))
+#define rtw_IOL_append_WRF_cmd(xmit_frame, rf_path, addr, value, mask)	\
+	_rtw_IOL_append_WRF_cmd((xmit_frame),(rf_path), (addr), (value), (mask))
+
+u8 rtw_IOL_cmd_boundary_handle(struct xmit_frame *pxmit_frame);
+void  rtw_IOL_cmd_buf_dump(struct adapter  *Adapter,int buf_len,u8 *pbuf);
+
+#endif /* __RTW_IOL_H_ */

drivers/staging/rtl8188eu/include/rtw_led.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_LED_H_
+#define __RTW_LED_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MSECS(t)        (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+
+#define LED_BLINK_NORMAL_INTERVAL		100
+#define LED_BLINK_SLOWLY_INTERVAL		200
+#define LED_BLINK_LONG_INTERVAL			400
+
+#define LED_BLINK_NO_LINK_INTERVAL_ALPHA	1000
+#define LED_BLINK_LINK_INTERVAL_ALPHA		500	/* 500 */
+#define LED_BLINK_SCAN_INTERVAL_ALPHA		180	/* 150 */
+#define LED_BLINK_FASTER_INTERVAL_ALPHA		50
+#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA	5000
+
+#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX	100
+#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX	2000
+
+#define LED_BLINK_SLOWLY_INTERVAL_PORNET	1000
+#define LED_BLINK_NORMAL_INTERVAL_PORNET	100
+
+#define LED_BLINK_FAST_INTERVAL_BITLAND		30
+
+/*  060403, rcnjko: Customized for AzWave. */
+#define LED_CM2_BLINK_ON_INTERVAL		250
+#define LED_CM2_BLINK_OFF_INTERVAL		4750
+
+#define LED_CM8_BLINK_INTERVAL			500	/* for QMI */
+#define LED_CM8_BLINK_OFF_INTERVAL		3750	/* for QMI */
+
+/*  080124, lanhsin: Customized for RunTop */
+#define LED_RunTop_BLINK_INTERVAL		300
+
+/*  060421, rcnjko: Customized for Sercomm Printer Server case. */
+#define LED_CM3_BLINK_INTERVAL			1500
+
+enum LED_CTL_MODE {
+	LED_CTL_POWER_ON = 1,
+	LED_CTL_LINK = 2,
+	LED_CTL_NO_LINK = 3,
+	LED_CTL_TX = 4,
+	LED_CTL_RX = 5,
+	LED_CTL_SITE_SURVEY = 6,
+	LED_CTL_POWER_OFF = 7,
+	LED_CTL_START_TO_LINK = 8,
+	LED_CTL_START_WPS = 9,
+	LED_CTL_STOP_WPS = 10,
+	LED_CTL_START_WPS_BOTTON = 11, /* added for runtop */
+	LED_CTL_STOP_WPS_FAIL = 12, /* added for ALPHA */
+	LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, /* added for BELKIN */
+	LED_CTL_CONNECTION_NO_TRANSFER = 14,
+};
+
+enum LED_STATE_871x {
+	LED_UNKNOWN = 0,
+	RTW_LED_ON = 1,
+	RTW_LED_OFF = 2,
+	LED_BLINK_NORMAL = 3,
+	LED_BLINK_SLOWLY = 4,
+	LED_BLINK_POWER_ON = 5,
+	LED_BLINK_SCAN = 6, /*  LED is blinking during scanning period,
+			     * the # of times to blink is depend on time
+			     * for scanning. */
+	LED_BLINK_NO_LINK = 7, /*  LED is blinking during no link state. */
+	LED_BLINK_StartToBlink = 8,/*  Customzied for Sercomm Printer
+				    * Server case */
+	LED_BLINK_TXRX = 9,
+	LED_BLINK_WPS = 10,	/*  LED is blinkg during WPS communication */
+	LED_BLINK_WPS_STOP = 11,	/* for ALPHA */
+	LED_BLINK_WPS_STOP_OVERLAP = 12,	/* for BELKIN */
+	LED_BLINK_RUNTOP = 13, /*  Customized for RunTop */
+	LED_BLINK_CAMEO = 14,
+	LED_BLINK_XAVI = 15,
+	LED_BLINK_ALWAYS_ON = 16,
+};
+
+enum LED_PIN_871x {
+	LED_PIN_NULL = 0,
+	LED_PIN_LED0 = 1,
+	LED_PIN_LED1 = 2,
+	LED_PIN_LED2 = 3,
+	LED_PIN_GPIO0 = 4,
+};
+
+struct LED_871x {
+	struct adapter *padapter;
+
+	enum LED_PIN_871x	LedPin;	/* Identify how to implement this
+					 * SW led. */
+	enum LED_STATE_871x	CurrLedState; /*  Current LED state. */
+	enum LED_STATE_871x	BlinkingLedState; /*  Next state for blinking,
+				   * either RTW_LED_ON or RTW_LED_OFF are. */
+
+	u8 bLedOn; /*  true if LED is ON, false if LED is OFF. */
+
+	u8 bLedBlinkInProgress; /*  true if it is blinking, false o.w.. */
+
+	u8 bLedWPSBlinkInProgress;
+
+	u32 BlinkTimes; /*  Number of times to toggle led state for blinking. */
+
+	struct timer_list BlinkTimer; /*  Timer object for led blinking. */
+
+	u8 bSWLedCtrl;
+
+	/*  ALPHA, added by chiyoko, 20090106 */
+	u8 bLedNoLinkBlinkInProgress;
+	u8 bLedLinkBlinkInProgress;
+	u8 bLedStartToLinkBlinkInProgress;
+	u8 bLedScanBlinkInProgress;
+	struct work_struct BlinkWorkItem; /* Workitem used by BlinkTimer to
+					   * manipulate H/W to blink LED. */
+};
+
+#define IS_LED_WPS_BLINKING(_LED_871x)					\
+	(((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS || \
+	((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS_STOP || \
+	((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_871x)					\
+	(((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress	||	\
+	((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress)
+
+/*  LED customization. */
+
+enum LED_STRATEGY_871x {
+	SW_LED_MODE0 = 0, /* SW control 1 LED via GPIO0. It is default option.*/
+	SW_LED_MODE1= 1, /*  2 LEDs, through LED0 and LED1. For ALPHA. */
+	SW_LED_MODE2 = 2, /*  SW control 1 LED via GPIO0, customized for AzWave
+			   * 8187 minicard. */
+	SW_LED_MODE3 = 3, /*  SW control 1 LED via GPIO0, customized for Sercomm
+			   * Printer Server case. */
+	SW_LED_MODE4 = 4, /* for Edimax / Belkin */
+	SW_LED_MODE5 = 5, /* for Sercomm / Belkin */
+	SW_LED_MODE6 = 6, /* for 88CU minicard, porting from ce SW_LED_MODE7 */
+	HW_LED = 50, /*  HW control 2 LEDs, LED0 and LED1 (there are 4
+		      * different control modes, see MAC.CONFIG1 for details.)*/
+	LED_ST_NONE = 99,
+};
+
+void LedControl871x(struct adapter *padapter, enum LED_CTL_MODE	LedAction);
+
+struct led_priv{
+	/* add for led controll */
+	struct LED_871x			SwLed0;
+	struct LED_871x			SwLed1;
+	enum LED_STRATEGY_871x	LedStrategy;
+	u8	bRegUseLed;
+	void (*LedControlHandler)(struct adapter *padapter,
+				  enum LED_CTL_MODE LedAction);
+	/* add for led controll */
+};
+
+#define rtw_led_control(adapt, action) \
+	do { \
+		if ((adapt)->ledpriv.LedControlHandler) \
+			(adapt)->ledpriv.LedControlHandler((adapt), (action)); \
+	} while (0)
+
+void BlinkTimerCallback(void *data);
+void BlinkWorkItemCallback(struct work_struct *work);
+
+void ResetLedStatus(struct LED_871x * pLed);
+
+void InitLed871x(struct adapter *padapter, struct LED_871x *pLed,
+		 enum LED_PIN_871x LedPin);
+
+void DeInitLed871x(struct LED_871x *pLed);
+
+/* hal... */
+void BlinkHandler(struct LED_871x * pLed);
+void SwLedOn(struct adapter *padapter, struct LED_871x *pLed);
+void SwLedOff(struct adapter *padapter, struct LED_871x *pLed);
+
+#endif /* __RTW_LED_H_ */