Commit 93df7cc6 authored by Jakub Kicinski's avatar Jakub Kicinski

Merge branch 'net-mvmdio-performance-related-improvements'

Tobias Waldekranz says:

====================
net: mvmdio: Performance related improvements

Observations of the XMDIO bus on a CN9130-based system during a
firmware download showed a very low bus utilization, which stemmed
from the 150us (10x the average access time) sleep which would take
place when the first poll did not succeed.

With this series in place, bus throughput increases by about 10x,
multiplied by whatever gain you are able to extract from running the
MDC at a higher frequency (hardware dependent).
====================

Link: https://lore.kernel.org/r/20231204100811.2708884-1-tobias@waldekranz.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents f3c92800 eb6a6605
......@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
......@@ -52,17 +53,19 @@
#define MVMDIO_XSMI_BUSY BIT(30)
#define MVMDIO_XSMI_ADDR_REG 0x8
#define MVMDIO_XSMI_CFG_REG 0xc
#define MVMDIO_XSMI_CLKDIV_MASK 0x3
#define MVMDIO_XSMI_CLKDIV_256 0x0
#define MVMDIO_XSMI_CLKDIV_64 0x1
#define MVMDIO_XSMI_CLKDIV_32 0x2
#define MVMDIO_XSMI_CLKDIV_8 0x3
/*
* SMI Timeout measurements:
* - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)
* - Armada 370 (Globalscale Mirabox): 41us to 43us (Polled)
*/
#define MVMDIO_SMI_TIMEOUT 1000 /* 1000us = 1ms */
#define MVMDIO_SMI_POLL_INTERVAL_MIN 45
#define MVMDIO_SMI_POLL_INTERVAL_MAX 55
#define MVMDIO_XSMI_POLL_INTERVAL_MIN 150
#define MVMDIO_XSMI_POLL_INTERVAL_MAX 160
struct orion_mdio_dev {
void __iomem *regs;
......@@ -84,8 +87,6 @@ enum orion_mdio_bus_type {
struct orion_mdio_ops {
int (*is_done)(struct orion_mdio_dev *);
unsigned int poll_interval_min;
unsigned int poll_interval_max;
};
/* Wait for the SMI unit to be ready for another operation
......@@ -94,34 +95,23 @@ static int orion_mdio_wait_ready(const struct orion_mdio_ops *ops,
struct mii_bus *bus)
{
struct orion_mdio_dev *dev = bus->priv;
unsigned long timeout = usecs_to_jiffies(MVMDIO_SMI_TIMEOUT);
unsigned long end = jiffies + timeout;
int timedout = 0;
unsigned long timeout;
int done;
while (1) {
if (ops->is_done(dev))
if (dev->err_interrupt <= 0) {
if (!read_poll_timeout_atomic(ops->is_done, done, done, 2,
MVMDIO_SMI_TIMEOUT, false, dev))
return 0;
} else {
/* wait_event_timeout does not guarantee a delay of at
* least one whole jiffie, so timeout must be no less
* than two.
*/
timeout = max(usecs_to_jiffies(MVMDIO_SMI_TIMEOUT), 2);
if (wait_event_timeout(dev->smi_busy_wait,
ops->is_done(dev), timeout))
return 0;
else if (timedout)
break;
if (dev->err_interrupt <= 0) {
usleep_range(ops->poll_interval_min,
ops->poll_interval_max);
if (time_is_before_jiffies(end))
++timedout;
} else {
/* wait_event_timeout does not guarantee a delay of at
* least one whole jiffie, so timeout must be no less
* than two.
*/
if (timeout < 2)
timeout = 2;
wait_event_timeout(dev->smi_busy_wait,
ops->is_done(dev), timeout);
++timedout;
}
}
dev_err(bus->parent, "Timeout: SMI busy for too long\n");
......@@ -135,8 +125,6 @@ static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
static const struct orion_mdio_ops orion_mdio_smi_ops = {
.is_done = orion_mdio_smi_is_done,
.poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN,
.poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX,
};
static int orion_mdio_smi_read(struct mii_bus *bus, int mii_id,
......@@ -194,8 +182,6 @@ static int orion_mdio_xsmi_is_done(struct orion_mdio_dev *dev)
static const struct orion_mdio_ops orion_mdio_xsmi_ops = {
.is_done = orion_mdio_xsmi_is_done,
.poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN,
.poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX,
};
static int orion_mdio_xsmi_read_c45(struct mii_bus *bus, int mii_id,
......@@ -246,6 +232,40 @@ static int orion_mdio_xsmi_write_c45(struct mii_bus *bus, int mii_id,
return 0;
}
static void orion_mdio_xsmi_set_mdc_freq(struct mii_bus *bus)
{
struct orion_mdio_dev *dev = bus->priv;
struct clk *mg_core;
u32 div, freq, cfg;
if (device_property_read_u32(bus->parent, "clock-frequency", &freq))
return;
mg_core = of_clk_get_by_name(bus->parent->of_node, "mg_core_clk");
if (IS_ERR(mg_core)) {
dev_err(bus->parent,
"MG core clock unknown, not changing MDC frequency");
return;
}
div = clk_get_rate(mg_core) / (freq + 1) + 1;
clk_put(mg_core);
if (div <= 8)
div = MVMDIO_XSMI_CLKDIV_8;
else if (div <= 32)
div = MVMDIO_XSMI_CLKDIV_32;
else if (div <= 64)
div = MVMDIO_XSMI_CLKDIV_64;
else
div = MVMDIO_XSMI_CLKDIV_256;
cfg = readl(dev->regs + MVMDIO_XSMI_CFG_REG);
cfg &= ~MVMDIO_XSMI_CLKDIV_MASK;
cfg |= div;
writel(cfg, dev->regs + MVMDIO_XSMI_CFG_REG);
}
static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
{
struct orion_mdio_dev *dev = dev_id;
......@@ -324,6 +344,9 @@ static int orion_mdio_probe(struct platform_device *pdev)
dev_warn(&pdev->dev,
"unsupported number of clocks, limiting to the first "
__stringify(ARRAY_SIZE(dev->clk)) "\n");
if (type == BUS_TYPE_XSMI)
orion_mdio_xsmi_set_mdc_freq(bus);
} else {
dev->clk[0] = clk_get(&pdev->dev, NULL);
if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment