Commit 9408ec1a authored by Akinobu Mita's avatar Akinobu Mita Committed by Alexandre Belloni

rtc: pcf2127: add support for spi interface

pcf2127 has selectable I2C-bus and SPI-bus interface support.

This adds support for SPI interface.
Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
parent 907b3262
...@@ -379,15 +379,6 @@ config RTC_DRV_X1205 ...@@ -379,15 +379,6 @@ config RTC_DRV_X1205
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called rtc-x1205. will be called rtc-x1205.
config RTC_DRV_PCF2127
tristate "NXP PCF2127"
help
If you say yes here you get support for the NXP PCF2127/29 RTC
chips.
This driver can also be built as a module. If so, the module
will be called rtc-pcf2127.
config RTC_DRV_PCF8523 config RTC_DRV_PCF8523
tristate "NXP PCF8523" tristate "NXP PCF8523"
help help
...@@ -776,6 +767,16 @@ config RTC_DRV_DS3232 ...@@ -776,6 +767,16 @@ config RTC_DRV_DS3232
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called rtc-ds3232. will be called rtc-ds3232.
config RTC_DRV_PCF2127
tristate "NXP PCF2127"
depends on RTC_I2C_AND_SPI
help
If you say yes here you get support for the NXP PCF2127/29 RTC
chips.
This driver can also be built as a module. If so, the module
will be called rtc-pcf2127.
comment "Platform RTC drivers" comment "Platform RTC drivers"
# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h> # this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
......
/* /*
* An I2C driver for the NXP PCF2127 RTC * An I2C and SPI driver for the NXP PCF2127 RTC
* Copyright 2013 Til-Technologies * Copyright 2013 Til-Technologies
* *
* Author: Renaud Cerrato <r.cerrato@til-technologies.fr> * Author: Renaud Cerrato <r.cerrato@til-technologies.fr>
...@@ -14,6 +14,7 @@ ...@@ -14,6 +14,7 @@
*/ */
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/bcd.h> #include <linux/bcd.h>
#include <linux/rtc.h> #include <linux/rtc.h>
#include <linux/slab.h> #include <linux/slab.h>
...@@ -200,6 +201,8 @@ static const struct of_device_id pcf2127_of_match[] = { ...@@ -200,6 +201,8 @@ static const struct of_device_id pcf2127_of_match[] = {
MODULE_DEVICE_TABLE(of, pcf2127_of_match); MODULE_DEVICE_TABLE(of, pcf2127_of_match);
#endif #endif
#if IS_ENABLED(CONFIG_I2C)
static int pcf2127_i2c_write(void *context, const void *data, size_t count) static int pcf2127_i2c_write(void *context, const void *data, size_t count)
{ {
struct device *dev = context; struct device *dev = context;
...@@ -311,7 +314,118 @@ static struct i2c_driver pcf2127_i2c_driver = { ...@@ -311,7 +314,118 @@ static struct i2c_driver pcf2127_i2c_driver = {
.probe = pcf2127_i2c_probe, .probe = pcf2127_i2c_probe,
.id_table = pcf2127_i2c_id, .id_table = pcf2127_i2c_id,
}; };
module_i2c_driver(pcf2127_i2c_driver);
static int pcf2127_i2c_register_driver(void)
{
return i2c_add_driver(&pcf2127_i2c_driver);
}
static void pcf2127_i2c_unregister_driver(void)
{
i2c_del_driver(&pcf2127_i2c_driver);
}
#else
static int pcf2127_i2c_register_driver(void)
{
return 0;
}
static void pcf2127_i2c_unregister_driver(void)
{
}
#endif
#if IS_ENABLED(CONFIG_SPI_MASTER)
static struct spi_driver pcf2127_spi_driver;
static int pcf2127_spi_probe(struct spi_device *spi)
{
static const struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
.read_flag_mask = 0xa0,
.write_flag_mask = 0x20,
};
struct regmap *regmap;
regmap = devm_regmap_init_spi(spi, &config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n",
__func__, PTR_ERR(regmap));
return PTR_ERR(regmap);
}
return pcf2127_probe(&spi->dev, regmap, pcf2127_spi_driver.driver.name);
}
static const struct spi_device_id pcf2127_spi_id[] = {
{ "pcf2127", 0 },
{ }
};
MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
static struct spi_driver pcf2127_spi_driver = {
.driver = {
.name = "rtc-pcf2127-spi",
.of_match_table = of_match_ptr(pcf2127_of_match),
},
.probe = pcf2127_spi_probe,
.id_table = pcf2127_spi_id,
};
static int pcf2127_spi_register_driver(void)
{
return spi_register_driver(&pcf2127_spi_driver);
}
static void pcf2127_spi_unregister_driver(void)
{
spi_unregister_driver(&pcf2127_spi_driver);
}
#else
static int pcf2127_spi_register_driver(void)
{
return 0;
}
static void pcf2127_spi_unregister_driver(void)
{
}
#endif
static int __init pcf2127_init(void)
{
int ret;
ret = pcf2127_i2c_register_driver();
if (ret) {
pr_err("Failed to register pcf2127 i2c driver: %d\n", ret);
return ret;
}
ret = pcf2127_spi_register_driver();
if (ret) {
pr_err("Failed to register pcf2127 spi driver: %d\n", ret);
pcf2127_i2c_unregister_driver();
}
return ret;
}
module_init(pcf2127_init)
static void __exit pcf2127_exit(void)
{
pcf2127_spi_unregister_driver();
pcf2127_i2c_unregister_driver();
}
module_exit(pcf2127_exit)
MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>"); MODULE_AUTHOR("Renaud Cerrato <r.cerrato@til-technologies.fr>");
MODULE_DESCRIPTION("NXP PCF2127 RTC driver"); MODULE_DESCRIPTION("NXP PCF2127 RTC driver");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment