[SCSI] lpfc 8.3.33: Fixed incomplete list of SLI4 commands with extended timeout value

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_hw.h

@@ -1460,6 +1460,7 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_UNREG_FCFI	    0xA2
 #define MBX_INIT_VFI        0xA3
 #define MBX_INIT_VPI        0xA4
+#define MBX_ACCESS_VDATA    0xA5
 
 #define MBX_AUTH_PORT       0xF8
 #define MBX_SECURITY_MGMT   0xF9

drivers/scsi/lpfc/lpfc_hw4.h

@@ -886,13 +886,19 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_EQ_DESTROY			0x37
 #define LPFC_MBOX_OPCODE_QUERY_FW_CFG			0x3A
 #define LPFC_MBOX_OPCODE_FUNCTION_RESET			0x3D
+#define LPFC_MBOX_OPCODE_SET_PHYSICAL_LINK_CONFIG	0x3E
+#define LPFC_MBOX_OPCODE_SET_BOOT_CONFIG		0x43
 #define LPFC_MBOX_OPCODE_GET_PORT_NAME			0x4D
 #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT			0x5A
+#define LPFC_MBOX_OPCODE_GET_VPD_DATA			0x5B
+#define LPFC_MBOX_OPCODE_SEND_ACTIVATION		0x73
+#define LPFC_MBOX_OPCODE_RESET_LICENSES			0x74
 #define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO		0x9A
 #define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT		0x9B
 #define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT		0x9C
 #define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT		0x9D
 #define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG		0xA0
+#define LPFC_MBOX_OPCODE_GET_PROFILE_CAPACITIES		0xA1
 #define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG		0xA4
 #define LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG		0xA5
 #define LPFC_MBOX_OPCODE_GET_PROFILE_LIST		0xA6

drivers/scsi/lpfc/lpfc_mbox.c

@@ -1612,12 +1612,15 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 
 	switch (mbox->mbxCommand) {
 	case MBX_WRITE_NV:	/* 0x03 */
+	case MBX_DUMP_MEMORY:	/* 0x17 */
 	case MBX_UPDATE_CFG:	/* 0x1B */
 	case MBX_DOWN_LOAD:	/* 0x1C */
 	case MBX_DEL_LD_ENTRY:	/* 0x1D */
+	case MBX_WRITE_VPARMS:	/* 0x32 */
 	case MBX_LOAD_AREA:	/* 0x81 */
 	case MBX_WRITE_WWN:     /* 0x98 */
 	case MBX_LOAD_EXP_ROM:	/* 0x9C */
+	case MBX_ACCESS_VDATA:	/* 0xA5 */
 		return LPFC_MBOX_TMO_FLASH_CMD;
 	case MBX_SLI4_CONFIG:	/* 0x9b */
 		subsys = lpfc_sli_config_mbox_subsys_get(phba, mboxq);
@@ -1628,11 +1631,17 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 			case LPFC_MBOX_OPCODE_WRITE_OBJECT:
 			case LPFC_MBOX_OPCODE_READ_OBJECT_LIST:
 			case LPFC_MBOX_OPCODE_DELETE_OBJECT:
-			case LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG:
 			case LPFC_MBOX_OPCODE_GET_PROFILE_LIST:
 			case LPFC_MBOX_OPCODE_SET_ACT_PROFILE:
+			case LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG:
 			case LPFC_MBOX_OPCODE_SET_PROFILE_CONFIG:
 			case LPFC_MBOX_OPCODE_GET_FACTORY_PROFILE_CONFIG:
+			case LPFC_MBOX_OPCODE_GET_PROFILE_CAPACITIES:
+			case LPFC_MBOX_OPCODE_SEND_ACTIVATION:
+			case LPFC_MBOX_OPCODE_RESET_LICENSES:
+			case LPFC_MBOX_OPCODE_SET_BOOT_CONFIG:
+			case LPFC_MBOX_OPCODE_GET_VPD_DATA:
+			case LPFC_MBOX_OPCODE_SET_PHYSICAL_LINK_CONFIG:
 				return LPFC_MBOX_SLI4_CONFIG_EXTENDED_TMO;
 			}
 		}

drivers/scsi/lpfc/lpfc_sli.c

@@ -2087,6 +2087,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 	case MBX_READ_EVENT_LOG:
 	case MBX_SECURITY_MGMT:
 	case MBX_AUTH_PORT:
+	case MBX_ACCESS_VDATA:
 		ret = mbxCommand;
 		break;
 	default: