[Bluetooth] Removal of unnecessary ignore module parameter

This removes the unnecessary ignore parameter, which is useless. There
are alternate methods of kicking a driver off an USB device.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/bcm203x.c

@@ -42,9 +42,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.1"
-
-static int ignore = 0;
+#define VERSION "1.2"
 
 static struct usb_device_id bcm203x_table[] = {
 	/* Broadcom Blutonium (BCM2033) */
@@ -175,7 +173,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore || (intf->cur_altsetting->desc.bInterfaceNumber != 0))
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -300,9 +298,6 @@ static void __exit bcm203x_exit(void)
 module_init(bcm203x_init);
 module_exit(bcm203x_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
 MODULE_VERSION(VERSION);

drivers/bluetooth/bfusb.c

@@ -43,9 +43,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "1.1"
-
-static int ignore = 0;
+#define VERSION "1.2"
 
 static struct usb_driver bfusb_driver;
 
@@ -656,9 +654,6 @@ static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore)
-		return -ENODEV;
-
 	/* Check number of endpoints */
 	if (intf->cur_altsetting->desc.bNumEndpoints < 2)
 		return -EIO;
@@ -795,9 +790,6 @@ static void __exit bfusb_exit(void)
 module_init(bfusb_init);
 module_exit(bfusb_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("BlueFRITZ! USB driver ver " VERSION);
 MODULE_VERSION(VERSION);

drivers/bluetooth/bpa10x.c

@@ -40,9 +40,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "0.9"
-
-static int ignore = 0;
+#define VERSION "0.10"
 
 static struct usb_device_id bpa10x_table[] = {
 	/* Tektronix BPA 100/105 (Digianswer) */
@@ -460,9 +458,6 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
 
 	BT_DBG("intf %p id %p", intf, id);
 
-	if (ignore)
-		return -ENODEV;
-
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 		return -ENODEV;
 
@@ -546,9 +541,6 @@ static void __exit bpa10x_exit(void)
 module_init(bpa10x_init);
 module_exit(bpa10x_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION);
 MODULE_VERSION(VERSION);

drivers/bluetooth/hci_usb.c

@@ -62,7 +62,6 @@
 #define URB_ZERO_PACKET 0
 #endif
 
-static int ignore;
 static int ignore_dga;
 static int ignore_csr;
 static int ignore_sniffer;
@@ -74,7 +73,7 @@ static int reset;
 static int isoc = 2;
 #endif
 
-#define VERSION "2.9"
+#define VERSION "2.10"
 
 static struct usb_driver hci_usb_driver; 
 
@@ -801,7 +800,7 @@ static int hci_usb_probe(struct usb_interface *intf, const struct usb_device_id
 			id = match;
 	}
 
-	if (ignore || id->driver_info & HCI_IGNORE)
+	if (id->driver_info & HCI_IGNORE)
 		return -ENODEV;
 
 	if (ignore_dga && id->driver_info & HCI_DIGIANSWER)
@@ -1108,9 +1107,6 @@ static void __exit hci_usb_exit(void)
 module_init(hci_usb_init);
 module_exit(hci_usb_exit);
 
-module_param(ignore, bool, 0644);
-MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
-
 module_param(ignore_dga, bool, 0644);
 MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");