Move arch specific options to their Makefile

The ROOT_DEV, SVGA_MODE and RAMDISK variables are i386/x86_64
specific, so move them to arch/$(ARCH)/boot/Makefile, this
is where they are used.

They still can be overridden on the command line like before,
though I doubt anybody is still using them.

Makefile

@@ -92,32 +92,6 @@ CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
 	  -fomit-frame-pointer -fno-strict-aliasing -fno-common
 AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS)
 
-#
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-# This is i386 specific.
-#
-
-export ROOT_DEV = CURRENT
-
-#
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-# This is i386 specific.
-#
-
-export SVGA_MODE = -DSVGA_MODE=NORMAL_VGA
-
-#
-# If you want the RAM disk device, define this to be the size in blocks.
-# This is i386 specific.
-#
-
-#export RAMDISK = -DRAMDISK=512
-
 CORE_FILES	=kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o
 NETWORKS	=net/network.o
 

arch/i386/boot/Makefile

@@ -8,6 +8,25 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
+# ROOT_DEV specifies the default root-device when making the image.
+# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
+# the default of FLOPPY is used by 'build'.
+
+ROOT_DEV := CURRENT
+
+# If you want to preset the SVGA mode, uncomment the next line and
+# set SVGA_MODE to whatever number you want.
+# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
+# The number is the same as you would ordinarily press at bootup.
+
+SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
+
+# If you want the RAM disk device, define this to be the size in blocks.
+
+RAMDISK := -DRAMDISK=512
+
+# ---------------------------------------------------------------------------
+
 BOOT_INCL =	$(TOPDIR)/include/linux/config.h \
 		$(TOPDIR)/include/linux/autoconf.h \
 		$(TOPDIR)/include/asm/boot.h

arch/x86_64/boot/Makefile

@@ -8,6 +8,25 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
+# ROOT_DEV specifies the default root-device when making the image.
+# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
+# the default of FLOPPY is used by 'build'.
+
+ROOT_DEV := CURRENT
+
+# If you want to preset the SVGA mode, uncomment the next line and
+# set SVGA_MODE to whatever number you want.
+# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
+# The number is the same as you would ordinarily press at bootup.
+
+SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
+
+# If you want the RAM disk device, define this to be the size in blocks.
+
+RAMDISK := -DRAMDISK=512
+
+# ---------------------------------------------------------------------------
+
 BOOT_INCL =	$(TOPDIR)/include/linux/config.h \
 		$(TOPDIR)/include/linux/autoconf.h \
 		$(TOPDIR)/include/asm/boot.h