arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags marking

bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to describe various node usage during
boot phases with DT.

Describe the same for beagleplay boot devices.
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230911162535.1044560-3-nm@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts

@@ -46,6 +46,7 @@ chosen {
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -83,6 +84,7 @@ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
 	};
 
 	vsys_5v0: regulator-1 {
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -93,6 +95,7 @@ vsys_5v0: regulator-1 {
 
 	vdd_3v3: regulator-2 {
 		/* output of TLV62595DMQR-U12 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -118,6 +121,7 @@ wlan_en: regulator-3 {
 
 	vdd_3v3_sd: regulator-4 {
 		/* output of TPS22918DBVR-U21 */
+		bootph-all;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
 
@@ -132,6 +136,7 @@ vdd_3v3_sd: regulator-4 {
 	};
 
 	vdd_sd_dv: regulator-5 {
+		bootph-all;
 		compatible = "regulator-gpio";
 		regulator-name = "sd_hs200_switch";
 		pinctrl-names = "default";
@@ -146,9 +151,11 @@ vdd_sd_dv: regulator-5 {
 	};
 
 	leds {
+		bootph-all;
 		compatible = "gpio-leds";
 
 		led-0 {
+			bootph-all;
 			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			function = LED_FUNCTION_HEARTBEAT;
@@ -156,6 +163,7 @@ led-0 {
 		};
 
 		led-1 {
+			bootph-all;
 			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 			function = LED_FUNCTION_DISK_ACTIVITY;
@@ -163,16 +171,19 @@ led-1 {
 		};
 
 		led-2 {
+			bootph-all;
 			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_CPU;
 		};
 
 		led-3 {
+			bootph-all;
 			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_LAN;
 		};
 
 		led-4 {
+			bootph-all;
 			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_WLAN;
 		};
@@ -245,6 +256,7 @@ cpsw3g_phy1: ethernet-phy@1 {
 
 &main_pmx0 {
 	gpio0_pins_default: gpio0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
 			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
@@ -264,6 +276,7 @@ AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
 		>;
@@ -283,6 +296,7 @@ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
 	};
 
 	local_i2c_pins_default: local-i2c-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
 			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
@@ -321,6 +335,7 @@ AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
 	};
 
 	emmc_pins_default: emmc-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
 			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
@@ -336,12 +351,14 @@ AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
 	};
 
 	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
 		>;
 	};
 
 	sd_pins_default: sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
 			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
@@ -418,6 +435,7 @@ AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
 	};
 
 	mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
 			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
@@ -426,6 +444,7 @@ AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
 	};
 
 	console_pins_default: console-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
 			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
@@ -597,6 +616,7 @@ &cpsw3g_mdio {
 };
 
 &main_gpio0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio0_pins_default>;
 	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
@@ -616,6 +636,7 @@ &main_gpio0 {
 };
 
 &main_gpio1 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mikrobus_gpio_pins_default>;
 	gpio-line-names = "", "", "", "", "",			/* 0-4 */
@@ -633,6 +654,7 @@ &main_gpio1 {
 };
 
 &main_i2c0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&local_i2c_pins_default>;
 	clock-frequency = <400000>;
@@ -651,6 +673,7 @@ rtc: rtc@68 {
 	};
 
 	tps65219: pmic@30 {
+		bootph-all;
 		compatible = "ti,tps65219";
 		reg = <0x30>;
 		buck1-supply = <&vsys_5v0>;
@@ -801,6 +824,7 @@ &main_spi2 {
 };
 
 &sdhci0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -810,6 +834,7 @@ &sdhci0 {
 
 &sdhci1 {
 	/* SD/MMC */
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd_pins_default>;
 
@@ -850,6 +875,7 @@ wlcore: wlcore@2 {
 };
 
 &main_uart0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&console_pins_default>;
 	status = "okay";