Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Add empty suspend/resume device irq functions
  PM/Hibernate: Move NVS routines into a seperate file (v2).
  PM/Hibernate: Rename disk.c to hibernate.c
  PM: Separate suspend to RAM functionality from core
  Driver Core: Rework platform suspend/resume, print warning
  PM: Remove device_type suspend()/resume()
  PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
  PM/Suspend: Do not shrink memory before suspend
  PM: Remove bus_type suspend_late()/resume_early() V2
  PM core: rename suspend and resume functions
  PM: Rename device_power_down/up()
  PM: Remove unused asm/suspend.h
  x86: unify power/cpu_(32|64).c
  x86: unify power/cpu_(32|64) copyright notes
  x86: unify power/cpu_(32|64) regarding restoring processor state
  x86: unify power/cpu_(32|64) regarding saving processor state
  x86: unify power/cpu_(32|64) global variables
  x86: unify power/cpu_(32|64) headers
  PM: Warn if interrupts are enabled during suspend-resume of sysdevs
  PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c

Documentation/power/devices.txt

@@ -75,9 +75,6 @@ may need to apply in domain-specific ways to their devices:
 struct bus_type {
 	...
 	int  (*suspend)(struct device *dev, pm_message_t state);
-	int  (*suspend_late)(struct device *dev, pm_message_t state);
-
-	int  (*resume_early)(struct device *dev);
 	int  (*resume)(struct device *dev);
 };
 
@@ -226,20 +223,7 @@ The phases are seen by driver notifications issued in this order:
 
 	This call should handle parts of device suspend logic that require
 	sleeping.  It probably does work to quiesce the device which hasn't
-	been abstracted into class.suspend() or bus.suspend_late().
-
-   3	bus.suspend_late(dev, message) is called with IRQs disabled, and
-	with only one CPU active.  Until the bus.resume_early() phase
-	completes (see later), IRQs are not enabled again.  This method
-	won't be exposed by all busses; for message based busses like USB,
-	I2C, or SPI, device interactions normally require IRQs.  This bus
-	call may be morphed into a driver call with bus-specific parameters.
-
-	This call might save low level hardware state that might otherwise
-	be lost in the upcoming low power state, and actually put the
-	device into a low power state ... so that in some cases the device
-	may stay partly usable until this late.  This "late" call may also
-	help when coping with hardware that behaves badly.
+	been abstracted into class.suspend().
 
 The pm_message_t parameter is currently used to refine those semantics
 (described later).
@@ -351,19 +335,11 @@ devices processing each phase's calls before the next phase begins.
 
 The phases are seen by driver notifications issued in this order:
 
-   1	bus.resume_early(dev) is called with IRQs disabled, and with
-   	only one CPU active.  As with bus.suspend_late(), this method
-	won't be supported on busses that require IRQs in order to
-	interact with devices.
-
-	This reverses the effects of bus.suspend_late().
-
-   2	bus.resume(dev) is called next.  This may be morphed into a device
-   	driver call with bus-specific parameters; implementations may sleep.
-
-	This reverses the effects of bus.suspend().
+   1	bus.resume(dev) reverses the effects of bus.suspend().  This may
+	be morphed into a device driver call with bus-specific parameters;
+	implementations may sleep.
 
-   3	class.resume(dev) is called for devices associated with a class
+   2	class.resume(dev) is called for devices associated with a class
 	that has such a method.  Implementations may sleep.
 
 	This reverses the effects of class.suspend(), and would usually

arch/alpha/include/asm/suspend.h

-#ifndef __ALPHA_SUSPEND_H
-#define __ALPHA_SUSPEND_H
-
-/* Dummy include. */
-
-#endif  /* __ALPHA_SUSPEND_H */

arch/arm/include/asm/suspend.h

-#ifndef _ASMARM_SUSPEND_H
-#define _ASMARM_SUSPEND_H
-
-#endif

arch/ia64/include/asm/suspend.h

-/* dummy (must be non-empty to prevent prejudicial removal...) */

arch/m68k/include/asm/suspend.h

-#ifndef _M68K_SUSPEND_H
-#define _M68K_SUSPEND_H
-
-/* Dummy include. */
-
-#endif  /* _M68K_SUSPEND_H */

arch/mips/include/asm/suspend.h

-#ifndef __ASM_SUSPEND_H
-#define __ASM_SUSPEND_H
-
-/* Somewhen...  Maybe :-)  */
-
-#endif /* __ASM_SUSPEND_H */

arch/s390/include/asm/suspend.h

-#ifndef __ASM_S390_SUSPEND_H
-#define __ASM_S390_SUSPEND_H
-
-#endif
-

arch/um/include/asm/suspend.h

-#ifndef __UM_SUSPEND_H
-#define __UM_SUSPEND_H
-
-#endif

arch/x86/kernel/acpi/sleep.c

@@ -104,7 +104,7 @@ int acpi_save_state_mem(void)
 	initial_gs = per_cpu_offset(smp_processor_id());
 #endif
 	initial_code = (unsigned long)wakeup_long64;
-	saved_magic = 0x123456789abcdef0;
+       saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
 	return 0;

arch/x86/kernel/apm_32.c

@@ -1233,9 +1233,9 @@ static int suspend(int vetoable)
 	int err;
 	struct apm_user	*as;
 
-	device_suspend(PMSG_SUSPEND);
+	dpm_suspend_start(PMSG_SUSPEND);
 
-	device_power_down(PMSG_SUSPEND);
+	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
@@ -1259,9 +1259,9 @@ static int suspend(int vetoable)
 	sysdev_resume();
 	local_irq_enable();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1277,7 +1277,7 @@ static void standby(void)
 {
 	int err;
 
-	device_power_down(PMSG_SUSPEND);
+	dpm_suspend_noirq(PMSG_SUSPEND);
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
@@ -1291,7 +1291,7 @@ static void standby(void)
 	sysdev_resume();
 	local_irq_enable();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 }
 
 static apm_event_t get_event(void)
@@ -1376,7 +1376,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume(PMSG_RESUME);
+				dpm_resume_end(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;

arch/x86/power/Makefile

@@ -3,5 +3,5 @@
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_cpu_$(BITS).o	:= $(nostackp)
 
-obj-$(CONFIG_PM_SLEEP)		+= cpu_$(BITS).o
+obj-$(CONFIG_PM_SLEEP)		+= cpu.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate_$(BITS).o hibernate_asm_$(BITS).o

arch/x86/power/cpu_64.c → arch/x86/power/cpu.c

 /*
- * Suspend and hibernation support for x86-64
+ * Suspend support specific for i386/x86-64.
  *
  * Distribute under GPLv2
  *
@@ -8,18 +8,28 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
-#include <linux/smp.h>
 #include <linux/suspend.h>
-#include <asm/proto.h>
-#include <asm/page.h>
+#include <linux/smp.h>
+
 #include <asm/pgtable.h>
+#include <asm/proto.h>
 #include <asm/mtrr.h>
+#include <asm/page.h>
+#include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
 
-static void fix_processor_context(void);
+#ifdef CONFIG_X86_32
+static struct saved_context saved_context;
 
+unsigned long saved_context_ebx;
+unsigned long saved_context_esp, saved_context_ebp;
+unsigned long saved_context_esi, saved_context_edi;
+unsigned long saved_context_eflags;
+#else
+/* CONFIG_X86_64 */
 struct saved_context saved_context;
+#endif
 
 /**
  *	__save_processor_state - save CPU registers before creating a
@@ -38,19 +48,35 @@ struct saved_context saved_context;
  */
 static void __save_processor_state(struct saved_context *ctxt)
 {
+#ifdef CONFIG_X86_32
+	mtrr_save_fixed_ranges(NULL);
+#endif
 	kernel_fpu_begin();
 
 	/*
 	 * descriptor tables
 	 */
+#ifdef CONFIG_X86_32
+	store_gdt(&ctxt->gdt);
+	store_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
 	store_gdt((struct desc_ptr *)&ctxt->gdt_limit);
 	store_idt((struct desc_ptr *)&ctxt->idt_limit);
+#endif
 	store_tr(ctxt->tr);
 
 	/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */
 	/*
 	 * segment registers
 	 */
+#ifdef CONFIG_X86_32
+	savesegment(es, ctxt->es);
+	savesegment(fs, ctxt->fs);
+	savesegment(gs, ctxt->gs);
+	savesegment(ss, ctxt->ss);
+#else
+/* CONFIG_X86_64 */
 	asm volatile ("movw %%ds, %0" : "=m" (ctxt->ds));
 	asm volatile ("movw %%es, %0" : "=m" (ctxt->es));
 	asm volatile ("movw %%fs, %0" : "=m" (ctxt->fs));
@@ -62,30 +88,87 @@ static void __save_processor_state(struct saved_context *ctxt)
 	rdmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
 	mtrr_save_fixed_ranges(NULL);
 
+	rdmsrl(MSR_EFER, ctxt->efer);
+#endif
+
 	/*
 	 * control registers
 	 */
-	rdmsrl(MSR_EFER, ctxt->efer);
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
+#ifdef CONFIG_X86_32
+	ctxt->cr4 = read_cr4_safe();
+#else
+/* CONFIG_X86_64 */
 	ctxt->cr4 = read_cr4();
 	ctxt->cr8 = read_cr8();
+#endif
 }
 
+/* Needed by apm.c */
 void save_processor_state(void)
 {
 	__save_processor_state(&saved_context);
 }
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(save_processor_state);
+#endif
 
 static void do_fpu_end(void)
 {
 	/*
-	 * Restore FPU regs if necessary
+	 * Restore FPU regs if necessary.
 	 */
 	kernel_fpu_end();
 }
 
+static void fix_processor_context(void)
+{
+	int cpu = smp_processor_id();
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
+
+	set_tss_desc(cpu, t);	/*
+				 * This just modifies memory; should not be
+				 * necessary. But... This is necessary, because
+				 * 386 hardware has concept of busy TSS or some
+				 * similar stupidity.
+				 */
+
+#ifdef CONFIG_X86_64
+	get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
+
+	syscall_init();				/* This sets MSR_*STAR and related */
+#endif
+	load_TR_desc();				/* This does ltr */
+	load_LDT(&current->active_mm->context);	/* This does lldt */
+
+	/*
+	 * Now maybe reload the debug registers
+	 */
+	if (current->thread.debugreg7) {
+#ifdef CONFIG_X86_32
+		set_debugreg(current->thread.debugreg0, 0);
+		set_debugreg(current->thread.debugreg1, 1);
+		set_debugreg(current->thread.debugreg2, 2);
+		set_debugreg(current->thread.debugreg3, 3);
+		/* no 4 and 5 */
+		set_debugreg(current->thread.debugreg6, 6);
+		set_debugreg(current->thread.debugreg7, 7);
+#else
+		/* CONFIG_X86_64 */
+		loaddebug(&current->thread, 0);
+		loaddebug(&current->thread, 1);
+		loaddebug(&current->thread, 2);
+		loaddebug(&current->thread, 3);
+		/* no 4 and 5 */
+		loaddebug(&current->thread, 6);
+		loaddebug(&current->thread, 7);
+#endif
+	}
+
+}
+
 /**
  *	__restore_processor_state - restore the contents of CPU registers saved
  *		by __save_processor_state()
@@ -96,9 +179,16 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	/*
 	 * control registers
 	 */
+	/* cr4 was introduced in the Pentium CPU */
+#ifdef CONFIG_X86_32
+	if (ctxt->cr4)
+		write_cr4(ctxt->cr4);
+#else
+/* CONFIG X86_64 */
 	wrmsrl(MSR_EFER, ctxt->efer);
 	write_cr8(ctxt->cr8);
 	write_cr4(ctxt->cr4);
+#endif
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
 	write_cr0(ctxt->cr0);
@@ -107,13 +197,31 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	 * now restore the descriptor tables to their proper values
 	 * ltr is done i fix_processor_context().
 	 */
+#ifdef CONFIG_X86_32
+	load_gdt(&ctxt->gdt);
+	load_idt(&ctxt->idt);
+#else
+/* CONFIG_X86_64 */
 	load_gdt((const struct desc_ptr *)&ctxt->gdt_limit);
 	load_idt((const struct desc_ptr *)&ctxt->idt_limit);
-
+#endif
 
 	/*
 	 * segment registers
 	 */
+#ifdef CONFIG_X86_32
+	loadsegment(es, ctxt->es);
+	loadsegment(fs, ctxt->fs);
+	loadsegment(gs, ctxt->gs);
+	loadsegment(ss, ctxt->ss);
+
+	/*
+	 * sysenter MSRs
+	 */
+	if (boot_cpu_has(X86_FEATURE_SEP))
+		enable_sep_cpu();
+#else
+/* CONFIG_X86_64 */
 	asm volatile ("movw %0, %%ds" :: "r" (ctxt->ds));
 	asm volatile ("movw %0, %%es" :: "r" (ctxt->es));
 	asm volatile ("movw %0, %%fs" :: "r" (ctxt->fs));
@@ -123,6 +231,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	wrmsrl(MSR_FS_BASE, ctxt->fs_base);
 	wrmsrl(MSR_GS_BASE, ctxt->gs_base);
 	wrmsrl(MSR_KERNEL_GS_BASE, ctxt->gs_kernel_base);
+#endif
 
 	/*
 	 * restore XCR0 for xsave capable cpu's.
@@ -134,41 +243,17 @@ static void __restore_processor_state(struct saved_context *ctxt)
 
 	do_fpu_end();
 	mtrr_ap_init();
+
+#ifdef CONFIG_X86_32
+	mcheck_init(&boot_cpu_data);
+#endif
 }
 
+/* Needed by apm.c */
 void restore_processor_state(void)
 {
 	__restore_processor_state(&saved_context);
 }
-
-static void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	/*
-	 * This just modifies memory; should not be necessary. But... This
-	 * is necessary, because 386 hardware has concept of busy TSS or some
-	 * similar stupidity.
-	 */
-	set_tss_desc(cpu, t);
-
-	get_cpu_gdt_table(cpu)[GDT_ENTRY_TSS].type = 9;
-
-	syscall_init();                         /* This sets MSR_*STAR and related */
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7){
-                loaddebug(&current->thread, 0);
-                loaddebug(&current->thread, 1);
-                loaddebug(&current->thread, 2);
-                loaddebug(&current->thread, 3);
-                /* no 4 and 5 */
-                loaddebug(&current->thread, 6);
-                loaddebug(&current->thread, 7);
-	}
-}
+#ifdef CONFIG_X86_32
+EXPORT_SYMBOL(restore_processor_state);
+#endif

arch/x86/power/cpu_32.c

-/*
- * Suspend support specific for i386.
- *
- * Distribute under GPLv2
- *
- * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
- * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
- */
-
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/xcr.h>
-#include <asm/suspend.h>
-
-static struct saved_context saved_context;
-
-unsigned long saved_context_ebx;
-unsigned long saved_context_esp, saved_context_ebp;
-unsigned long saved_context_esi, saved_context_edi;
-unsigned long saved_context_eflags;
-
-static void __save_processor_state(struct saved_context *ctxt)
-{
-	mtrr_save_fixed_ranges(NULL);
-	kernel_fpu_begin();
-
-	/*
-	 * descriptor tables
-	 */
-	store_gdt(&ctxt->gdt);
-	store_idt(&ctxt->idt);
-	store_tr(ctxt->tr);
-
-	/*
-	 * segment registers
-	 */
-	savesegment(es, ctxt->es);
-	savesegment(fs, ctxt->fs);
-	savesegment(gs, ctxt->gs);
-	savesegment(ss, ctxt->ss);
-
-	/*
-	 * control registers
-	 */
-	ctxt->cr0 = read_cr0();
-	ctxt->cr2 = read_cr2();
-	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = read_cr4_safe();
-}
-
-/* Needed by apm.c */
-void save_processor_state(void)
-{
-	__save_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(save_processor_state);
-
-static void do_fpu_end(void)
-{
-	/*
-	 * Restore FPU regs if necessary.
-	 */
-	kernel_fpu_end();
-}
-
-static void fix_processor_context(void)
-{
-	int cpu = smp_processor_id();
-	struct tss_struct *t = &per_cpu(init_tss, cpu);
-
-	set_tss_desc(cpu, t);	/*
-				 * This just modifies memory; should not be
-				 * necessary. But... This is necessary, because
-				 * 386 hardware has concept of busy TSS or some
-				 * similar stupidity.
-				 */
-
-	load_TR_desc();				/* This does ltr */
-	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
-
-}
-
-static void __restore_processor_state(struct saved_context *ctxt)
-{
-	/*
-	 * control registers
-	 */
-	/* cr4 was introduced in the Pentium CPU */
-	if (ctxt->cr4)
-		write_cr4(ctxt->cr4);
-	write_cr3(ctxt->cr3);
-	write_cr2(ctxt->cr2);
-	write_cr0(ctxt->cr0);
-
-	/*
-	 * now restore the descriptor tables to their proper values
-	 * ltr is done i fix_processor_context().
-	 */
-	load_gdt(&ctxt->gdt);
-	load_idt(&ctxt->idt);
-
-	/*
-	 * segment registers
-	 */
-	loadsegment(es, ctxt->es);
-	loadsegment(fs, ctxt->fs);
-	loadsegment(gs, ctxt->gs);
-	loadsegment(ss, ctxt->ss);
-
-	/*
-	 * sysenter MSRs
-	 */
-	if (boot_cpu_has(X86_FEATURE_SEP))
-		enable_sep_cpu();
-
-	/*
-	 * restore XCR0 for xsave capable cpu's.
-	 */
-	if (cpu_has_xsave)
-		xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
-
-	fix_processor_context();
-	do_fpu_end();
-	mtrr_ap_init();
-	mcheck_init(&boot_cpu_data);
-}
-
-/* Needed by apm.c */
-void restore_processor_state(void)
-{
-	__restore_processor_state(&saved_context);
-}
-EXPORT_SYMBOL(restore_processor_state);

drivers/base/platform.c

@@ -469,22 +469,6 @@ static void platform_drv_shutdown(struct device *_dev)
 	drv->shutdown(dev);
 }
 
-static int platform_drv_suspend(struct device *_dev, pm_message_t state)
-{
-	struct platform_driver *drv = to_platform_driver(_dev->driver);
-	struct platform_device *dev = to_platform_device(_dev);
-
-	return drv->suspend(dev, state);
-}
-
-static int platform_drv_resume(struct device *_dev)
-{
-	struct platform_driver *drv = to_platform_driver(_dev->driver);
-	struct platform_device *dev = to_platform_device(_dev);
-
-	return drv->resume(dev);
-}
-
 /**
  * platform_driver_register
  * @drv: platform driver structure
@@ -498,10 +482,10 @@ int platform_driver_register(struct platform_driver *drv)
 		drv->driver.remove = platform_drv_remove;
 	if (drv->shutdown)
 		drv->driver.shutdown = platform_drv_shutdown;
-	if (drv->suspend)
-		drv->driver.suspend = platform_drv_suspend;
-	if (drv->resume)
-		drv->driver.resume = platform_drv_resume;
+	if (drv->suspend || drv->resume)
+		pr_warning("Platform driver '%s' needs updating - please use "
+			"dev_pm_ops\n", drv->driver.name);
+
 	return driver_register(&drv->driver);
 }
 EXPORT_SYMBOL_GPL(platform_driver_register);
@@ -633,10 +617,12 @@ static int platform_match(struct device *dev, struct device_driver *drv)
 
 static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
+	struct platform_driver *pdrv = to_platform_driver(dev->driver);
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret = 0;
 
-	if (dev->driver && dev->driver->suspend)
-		ret = dev->driver->suspend(dev, mesg);
+	if (dev->driver && pdrv->suspend)
+		ret = pdrv->suspend(pdev, mesg);
 
 	return ret;
 }
@@ -667,10 +653,12 @@ static int platform_legacy_resume_early(struct device *dev)
 
 static int platform_legacy_resume(struct device *dev)
 {
+	struct platform_driver *pdrv = to_platform_driver(dev->driver);
+	struct platform_device *pdev = to_platform_device(dev);
 	int ret = 0;
 
-	if (dev->driver && dev->driver->resume)
-		ret = dev->driver->resume(dev);
+	if (dev->driver && pdrv->resume)
+		ret = pdrv->resume(pdev);
 
 	return ret;
 }

drivers/base/power/main.c

@@ -315,13 +315,13 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info,
 /*------------------------- Resume routines -------------------------*/
 
 /**
- *	resume_device_noirq - Power on one device (early resume).
+ *	device_resume_noirq - Power on one device (early resume).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	Must be called with interrupts disabled.
  */
-static int resume_device_noirq(struct device *dev, pm_message_t state)
+static int device_resume_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -334,9 +334,6 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "EARLY ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->resume_early) {
-		pm_dev_dbg(dev, state, "legacy EARLY ");
-		error = dev->bus->resume_early(dev);
 	}
  End:
 	TRACE_RESUME(error);
@@ -344,16 +341,16 @@ static int resume_device_noirq(struct device *dev, pm_message_t state)
 }
 
 /**
- *	dpm_power_up - Power on all regular (non-sysdev) devices.
+ *	dpm_resume_noirq - Power on all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Execute the appropriate "noirq resume" callback for all devices marked
- *	as DPM_OFF_IRQ.
+ *	Call the "noirq" resume handlers for all devices marked as
+ *	DPM_OFF_IRQ and enable device drivers to receive interrupts.
  *
  *	Must be called under dpm_list_mtx.  Device drivers should not receive
  *	interrupts while it's being executed.
  */
-static void dpm_power_up(pm_message_t state)
+void dpm_resume_noirq(pm_message_t state)
 {
 	struct device *dev;
 
@@ -363,33 +360,21 @@ static void dpm_power_up(pm_message_t state)
 			int error;
 
 			dev->power.status = DPM_OFF;
-			error = resume_device_noirq(dev, state);
+			error = device_resume_noirq(dev, state);
 			if (error)
 				pm_dev_err(dev, state, " early", error);
 		}
 	mutex_unlock(&dpm_list_mtx);
-}
-
-/**
- *	device_power_up - Turn on all devices that need special attention.
- *	@state: PM transition of the system being carried out.
- *
- *	Call the "early" resume handlers and enable device drivers to receive
- *	interrupts.
- */
-void device_power_up(pm_message_t state)
-{
-	dpm_power_up(state);
 	resume_device_irqs();
 }
-EXPORT_SYMBOL_GPL(device_power_up);
+EXPORT_SYMBOL_GPL(dpm_resume_noirq);
 
 /**
- *	resume_device - Restore state for one device.
+ *	device_resume - Restore state for one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int resume_device(struct device *dev, pm_message_t state)
+static int device_resume(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -414,9 +399,6 @@ static int resume_device(struct device *dev, pm_message_t state)
 		if (dev->type->pm) {
 			pm_dev_dbg(dev, state, "type ");
 			error = pm_op(dev, dev->type->pm, state);
-		} else if (dev->type->resume) {
-			pm_dev_dbg(dev, state, "legacy type ");
-			error = dev->type->resume(dev);
 		}
 		if (error)
 			goto End;
@@ -462,7 +444,7 @@ static void dpm_resume(pm_message_t state)
 			dev->power.status = DPM_RESUMING;
 			mutex_unlock(&dpm_list_mtx);
 
-			error = resume_device(dev, state);
+			error = device_resume(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 			if (error)
@@ -480,11 +462,11 @@ static void dpm_resume(pm_message_t state)
 }
 
 /**
- *	complete_device - Complete a PM transition for given device
+ *	device_complete - Complete a PM transition for given device
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static void complete_device(struct device *dev, pm_message_t state)
+static void device_complete(struct device *dev, pm_message_t state)
 {
 	down(&dev->sem);
 
@@ -527,7 +509,7 @@ static void dpm_complete(pm_message_t state)
 			dev->power.status = DPM_ON;
 			mutex_unlock(&dpm_list_mtx);
 
-			complete_device(dev, state);
+			device_complete(dev, state);
 
 			mutex_lock(&dpm_list_mtx);
 		}
@@ -540,19 +522,19 @@ static void dpm_complete(pm_message_t state)
 }
 
 /**
- *	device_resume - Restore state of each device in system.
+ *	dpm_resume_end - Restore state of each device in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Resume all the devices, unlock them all, and allow new
  *	devices to be registered once again.
  */
-void device_resume(pm_message_t state)
+void dpm_resume_end(pm_message_t state)
 {
 	might_sleep();
 	dpm_resume(state);
 	dpm_complete(state);
 }
-EXPORT_SYMBOL_GPL(device_resume);
+EXPORT_SYMBOL_GPL(dpm_resume_end);
 
 
 /*------------------------- Suspend routines -------------------------*/
@@ -577,13 +559,13 @@ static pm_message_t resume_event(pm_message_t sleep_state)
 }
 
 /**
- *	suspend_device_noirq - Shut down one device (late suspend).
+ *	device_suspend_noirq - Shut down one device (late suspend).
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  *
  *	This is called with interrupts off and only a single CPU running.
  */
-static int suspend_device_noirq(struct device *dev, pm_message_t state)
+static int device_suspend_noirq(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -593,24 +575,20 @@ static int suspend_device_noirq(struct device *dev, pm_message_t state)
 	if (dev->bus->pm) {
 		pm_dev_dbg(dev, state, "LATE ");
 		error = pm_noirq_op(dev, dev->bus->pm, state);
-	} else if (dev->bus->suspend_late) {
-		pm_dev_dbg(dev, state, "legacy LATE ");
-		error = dev->bus->suspend_late(dev, state);
-		suspend_report_result(dev->bus->suspend_late, error);
 	}
 	return error;
 }
 
 /**
- *	device_power_down - Shut down special devices.
+ *	dpm_suspend_noirq - Power down all regular (non-sysdev) devices.
  *	@state: PM transition of the system being carried out.
  *
- *	Prevent device drivers from receiving interrupts and call the "late"
+ *	Prevent device drivers from receiving interrupts and call the "noirq"
  *	suspend handlers.
  *
  *	Must be called under dpm_list_mtx.
  */
-int device_power_down(pm_message_t state)
+int dpm_suspend_noirq(pm_message_t state)
 {
 	struct device *dev;
 	int error = 0;
@@ -618,7 +596,7 @@ int device_power_down(pm_message_t state)
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
 	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
-		error = suspend_device_noirq(dev, state);
+		error = device_suspend_noirq(dev, state);
 		if (error) {
 			pm_dev_err(dev, state, " late", error);
 			break;
@@ -627,17 +605,17 @@ int device_power_down(pm_message_t state)
 	}
 	mutex_unlock(&dpm_list_mtx);
 	if (error)
-		device_power_up(resume_event(state));
+		dpm_resume_noirq(resume_event(state));
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(dpm_suspend_noirq);
 
 /**
- *	suspend_device - Save state of one device.
+ *	device_suspend - Save state of one device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int suspend_device(struct device *dev, pm_message_t state)
+static int device_suspend(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -660,10 +638,6 @@ static int suspend_device(struct device *dev, pm_message_t state)
 		if (dev->type->pm) {
 			pm_dev_dbg(dev, state, "type ");
 			error = pm_op(dev, dev->type->pm, state);
-		} else if (dev->type->suspend) {
-			pm_dev_dbg(dev, state, "legacy type ");
-			error = dev->type->suspend(dev, state);
-			suspend_report_result(dev->type->suspend, error);
 		}
 		if (error)
 			goto End;
@@ -704,7 +678,7 @@ static int dpm_suspend(pm_message_t state)
 		get_device(dev);
 		mutex_unlock(&dpm_list_mtx);
 
-		error = suspend_device(dev, state);
+		error = device_suspend(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -723,11 +697,11 @@ static int dpm_suspend(pm_message_t state)
 }
 
 /**
- *	prepare_device - Execute the ->prepare() callback(s) for given device.
+ *	device_prepare - Execute the ->prepare() callback(s) for given device.
  *	@dev:	Device.
  *	@state: PM transition of the system being carried out.
  */
-static int prepare_device(struct device *dev, pm_message_t state)
+static int device_prepare(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
@@ -781,7 +755,7 @@ static int dpm_prepare(pm_message_t state)
 		dev->power.status = DPM_PREPARING;
 		mutex_unlock(&dpm_list_mtx);
 
-		error = prepare_device(dev, state);
+		error = device_prepare(dev, state);
 
 		mutex_lock(&dpm_list_mtx);
 		if (error) {
@@ -807,12 +781,12 @@ static int dpm_prepare(pm_message_t state)
 }
 
 /**
- *	device_suspend - Save state and stop all devices in system.
+ *	dpm_suspend_start - Save state and stop all devices in system.
  *	@state: PM transition of the system being carried out.
  *
  *	Prepare and suspend all devices.
  */
-int device_suspend(pm_message_t state)
+int dpm_suspend_start(pm_message_t state)
 {
 	int error;
 
@@ -822,7 +796,7 @@ int device_suspend(pm_message_t state)
 		error = dpm_suspend(state);
 	return error;
 }
-EXPORT_SYMBOL_GPL(device_suspend);
+EXPORT_SYMBOL_GPL(dpm_suspend_start);
 
 void __suspend_report_result(const char *function, void *fn, int ret)
 {

drivers/base/sys.c

@@ -343,11 +343,15 @@ static void __sysdev_resume(struct sys_device *dev)
 	/* First, call the class-specific one */
 	if (cls->resume)
 		cls->resume(dev);
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled after %pF\n", cls->resume);
 
 	/* Call auxillary drivers next. */
 	list_for_each_entry(drv, &cls->drivers, entry) {
 		if (drv->resume)
 			drv->resume(dev);
+		WARN_ONCE(!irqs_disabled(),
+			"Interrupts enabled after %pF\n", drv->resume);
 	}
 }
 
@@ -377,6 +381,9 @@ int sysdev_suspend(pm_message_t state)
 	if (ret)
 		return ret;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while suspending system devices\n");
+
 	pr_debug("Suspending System Devices\n");
 
 	list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) {
@@ -393,6 +400,9 @@ int sysdev_suspend(pm_message_t state)
 					if (ret)
 						goto aux_driver;
 				}
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					drv->suspend);
 			}
 
 			/* Now call the generic one */
@@ -400,6 +410,9 @@ int sysdev_suspend(pm_message_t state)
 				ret = cls->suspend(sysdev, state);
 				if (ret)
 					goto cls_driver;
+				WARN_ONCE(!irqs_disabled(),
+					"Interrupts enabled after %pF\n",
+					cls->suspend);
 			}
 		}
 	}
@@ -452,6 +465,9 @@ int sysdev_resume(void)
 {
 	struct sysdev_class *cls;
 
+	WARN_ONCE(!irqs_disabled(),
+		"Interrupts enabled while resuming system devices\n");
+
 	pr_debug("Resuming System Devices\n");
 
 	list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) {

drivers/xen/manage.c

@@ -43,7 +43,7 @@ static int xen_suspend(void *data)
 	if (err) {
 		printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
 			err);
-		device_power_up(PMSG_RESUME);
+		dpm_resume_noirq(PMSG_RESUME);
 		return err;
 	}
 
@@ -69,7 +69,7 @@ static int xen_suspend(void *data)
 	}
 
 	sysdev_resume();
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 	return 0;
 }
@@ -92,18 +92,18 @@ static void do_suspend(void)
 	}
 #endif
 
-	err = device_suspend(PMSG_SUSPEND);
+	err = dpm_suspend_start(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
+		printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
 		goto out;
 	}
 
 	printk(KERN_DEBUG "suspending xenstore...\n");
 	xs_suspend();
 
-	err = device_power_down(PMSG_SUSPEND);
+	err = dpm_suspend_noirq(PMSG_SUSPEND);
 	if (err) {
-		printk(KERN_ERR "device_power_down failed: %d\n", err);
+		printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
 		goto resume_devices;
 	}
 
@@ -119,10 +119,10 @@ static void do_suspend(void)
 	} else
 		xs_suspend_cancel();
 
-	device_power_up(PMSG_RESUME);
+	dpm_resume_noirq(PMSG_RESUME);
 
 resume_devices:
-	device_resume(PMSG_RESUME);
+	dpm_resume_end(PMSG_RESUME);
 
 	/* Make sure timer events get retriggered on all CPUs */
 	clock_was_set();

include/linux/device.h

@@ -62,8 +62,6 @@ struct bus_type {
 	void (*shutdown)(struct device *dev);
 
 	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*suspend_late)(struct device *dev, pm_message_t state);
-	int (*resume_early)(struct device *dev);
 	int (*resume)(struct device *dev);
 
 	struct dev_pm_ops *pm;
@@ -291,9 +289,6 @@ struct device_type {
 	int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
 	void (*release)(struct device *dev);
 
-	int (*suspend)(struct device *dev, pm_message_t state);
-	int (*resume)(struct device *dev);
-
 	struct dev_pm_ops *pm;
 };
 

include/linux/interrupt.h

@@ -183,6 +183,7 @@ extern void disable_irq(unsigned int irq);
 extern void enable_irq(unsigned int irq);
 
 /* The following three functions are for the core kernel use only. */
+#ifdef CONFIG_GENERIC_HARDIRQS
 extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
 #ifdef CONFIG_PM_SLEEP
@@ -190,6 +191,11 @@ extern int check_wakeup_irqs(void);
 #else
 static inline int check_wakeup_irqs(void) { return 0; }
 #endif
+#else
+static inline void suspend_device_irqs(void) { };
+static inline void resume_device_irqs(void) { };
+static inline int check_wakeup_irqs(void) { return 0; }
+#endif
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 

include/linux/pm.h

@@ -382,14 +382,13 @@ struct dev_pm_info {
 #ifdef CONFIG_PM_SLEEP
 extern void device_pm_lock(void);
 extern int sysdev_resume(void);
-extern void device_power_up(pm_message_t state);
-extern void device_resume(pm_message_t state);
+extern void dpm_resume_noirq(pm_message_t state);
+extern void dpm_resume_end(pm_message_t state);
 
 extern void device_pm_unlock(void);
 extern int sysdev_suspend(pm_message_t state);
-extern int device_power_down(pm_message_t state);
-extern int device_suspend(pm_message_t state);
-extern int device_prepare_suspend(pm_message_t state);
+extern int dpm_suspend_noirq(pm_message_t state);
+extern int dpm_suspend_start(pm_message_t state);
 
 extern void __suspend_report_result(const char *function, void *fn, int ret);
 
@@ -403,7 +402,7 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
 #define device_pm_lock() do {} while (0)
 #define device_pm_unlock() do {} while (0)
 
-static inline int device_suspend(pm_message_t state)
+static inline int dpm_suspend_start(pm_message_t state)
 {
 	return 0;
 }

include/linux/suspend.h

@@ -245,11 +245,6 @@ extern unsigned long get_safe_page(gfp_t gfp_mask);
 
 extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
 extern int hibernate(void);
-extern int hibernate_nvs_register(unsigned long start, unsigned long size);
-extern int hibernate_nvs_alloc(void);
-extern void hibernate_nvs_free(void);
-extern void hibernate_nvs_save(void);
-extern void hibernate_nvs_restore(void);
 extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
@@ -258,6 +253,16 @@ static inline void swsusp_unset_page_free(struct page *p) {}
 
 static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
 static inline int hibernate(void) { return -ENOSYS; }
+static inline bool system_entering_hibernation(void) { return false; }
+#endif /* CONFIG_HIBERNATION */
+
+#ifdef CONFIG_HIBERNATION_NVS
+extern int hibernate_nvs_register(unsigned long start, unsigned long size);
+extern int hibernate_nvs_alloc(void);
+extern void hibernate_nvs_free(void);
+extern void hibernate_nvs_save(void);
+extern void hibernate_nvs_restore(void);
+#else /* CONFIG_HIBERNATION_NVS */
 static inline int hibernate_nvs_register(unsigned long a, unsigned long b)
 {
 	return 0;
@@ -266,8 +271,7 @@ static inline int hibernate_nvs_alloc(void) { return 0; }
 static inline void hibernate_nvs_free(void) {}
 static inline void hibernate_nvs_save(void) {}
 static inline void hibernate_nvs_restore(void) {}
-static inline bool system_entering_hibernation(void) { return false; }
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION_NVS */
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);

kernel/kexec.c

@@ -1448,17 +1448,17 @@ int kernel_kexec(void)
 			goto Restore_console;
 		}
 		suspend_console();
-		error = device_suspend(PMSG_FREEZE);
+		error = dpm_suspend_start(PMSG_FREEZE);
 		if (error)
 			goto Resume_console;
-		/* At this point, device_suspend() has been called,
-		 * but *not* device_power_down(). We *must*
-		 * device_power_down() now.  Otherwise, drivers for
+		/* At this point, dpm_suspend_start() has been called,
+		 * but *not* dpm_suspend_noirq(). We *must* call
+		 * dpm_suspend_noirq() now.  Otherwise, drivers for
 		 * some devices (e.g. interrupt controllers) become
 		 * desynchronized with the actual state of the
 		 * hardware at resume time, and evil weirdness ensues.
 		 */
-		error = device_power_down(PMSG_FREEZE);
+		error = dpm_suspend_noirq(PMSG_FREEZE);
 		if (error)
 			goto Resume_devices;
 		error = disable_nonboot_cpus();
@@ -1486,9 +1486,9 @@ int kernel_kexec(void)
 		local_irq_enable();
  Enable_cpus:
 		enable_nonboot_cpus();
-		device_power_up(PMSG_RESTORE);
+		dpm_resume_noirq(PMSG_RESTORE);
  Resume_devices:
-		device_resume(PMSG_RESTORE);
+		dpm_resume_end(PMSG_RESTORE);
  Resume_console:
 		resume_console();
 		thaw_processes();

kernel/power/Kconfig

@@ -116,9 +116,13 @@ config SUSPEND_FREEZER
 
 	  Turning OFF this setting is NOT recommended! If in doubt, say Y.
 
+config HIBERNATION_NVS
+	bool
+
 config HIBERNATION
 	bool "Hibernation (aka 'suspend to disk')"
 	depends on PM && SWAP && ARCH_HIBERNATION_POSSIBLE
+	select HIBERNATION_NVS if HAS_IOMEM
 	---help---
 	  Enable the suspend to disk (STD) functionality, which is usually
 	  called "hibernation" in user interfaces.  STD checkpoints the

kernel/power/Makefile

@@ -6,6 +6,9 @@ endif
 obj-$(CONFIG_PM)		+= main.o
 obj-$(CONFIG_PM_SLEEP)		+= console.o
 obj-$(CONFIG_FREEZER)		+= process.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o disk.o snapshot.o swap.o user.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o
+obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o hibernate.o snapshot.o swap.o user.o
+obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o

kernel/power/disk.c → kernel/power/hibernate.c

 /*
- * kernel/power/disk.c - Suspend-to-disk support.
+ * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support.
  *
  * Copyright (c) 2003 Patrick Mochel
  * Copyright (c) 2003 Open Source Development Lab
  * Copyright (c) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc.
  *
  * This file is released under the GPLv2.
- *
  */
 
 #include <linux/suspend.h>
@@ -215,13 +215,13 @@ static int create_image(int platform_mode)
 	if (error)
 		return error;
 
-	/* At this point, device_suspend() has been called, but *not*
-	 * device_power_down(). We *must* call device_power_down() now.
+	/* At this point, dpm_suspend_start() has been called, but *not*
+	 * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now.
 	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
 	 * become desynchronized with the actual state of the hardware
 	 * at resume time, and evil weirdness ensues.
 	 */
-	error = device_power_down(PMSG_FREEZE);
+	error = dpm_suspend_noirq(PMSG_FREEZE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting hibernation\n");
@@ -262,7 +262,7 @@ static int create_image(int platform_mode)
 
  Power_up:
 	sysdev_resume();
-	/* NOTE:  device_power_up() is just a resume() for devices
+	/* NOTE:  dpm_resume_noirq() is just a resume() for devices
 	 * that suspended with irqs off ... no overall powerup.
 	 */
 
@@ -275,7 +275,7 @@ static int create_image(int platform_mode)
  Platform_finish:
 	platform_finish(platform_mode);
 
-	device_power_up(in_suspend ?
+	dpm_resume_noirq(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 
 	return error;
@@ -304,7 +304,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
-	error = device_suspend(PMSG_FREEZE);
+	error = dpm_suspend_start(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
 
@@ -315,7 +315,7 @@ int hibernation_snapshot(int platform_mode)
 	/* Control returns here after successful restore */
 
  Resume_devices:
-	device_resume(in_suspend ?
+	dpm_resume_end(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
 	resume_console();
  Close:
@@ -339,7 +339,7 @@ static int resume_target_kernel(bool platform_mode)
 {
 	int error;
 
-	error = device_power_down(PMSG_QUIESCE);
+	error = dpm_suspend_noirq(PMSG_QUIESCE);
 	if (error) {
 		printk(KERN_ERR "PM: Some devices failed to power down, "
 			"aborting resume\n");
@@ -394,7 +394,7 @@ static int resume_target_kernel(bool platform_mode)
  Cleanup:
 	platform_restore_cleanup(platform_mode);
 
-	device_power_up(PMSG_RECOVER);
+	dpm_resume_noirq(PMSG_RECOVER);
 
 	return error;
 }
@@ -414,10 +414,10 @@ int hibernation_restore(int platform_mode)
 
 	pm_prepare_console();
 	suspend_console();
-	error = device_suspend(PMSG_QUIESCE);
+	error = dpm_suspend_start(PMSG_QUIESCE);
 	if (!error) {
 		error = resume_target_kernel(platform_mode);
-		device_resume(PMSG_RECOVER);
+		dpm_resume_end(PMSG_RECOVER);
 	}
 	resume_console();
 	pm_restore_console();
@@ -447,14 +447,14 @@ int hibernation_platform_enter(void)
 
 	entering_platform_hibernation = true;
 	suspend_console();
-	error = device_suspend(PMSG_HIBERNATE);
+	error = dpm_suspend_start(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
 			hibernation_ops->recover();
 		goto Resume_devices;
 	}
 
-	error = device_power_down(PMSG_HIBERNATE);
+	error = dpm_suspend_noirq(PMSG_HIBERNATE);
 	if (error)
 		goto Resume_devices;
 
@@ -479,11 +479,11 @@ int hibernation_platform_enter(void)
  Platofrm_finish:
 	hibernation_ops->finish();
 
-	device_power_up(PMSG_RESTORE);
+	dpm_suspend_noirq(PMSG_RESTORE);
 
  Resume_devices:
 	entering_platform_hibernation = false;
-	device_resume(PMSG_RESTORE);
+	dpm_resume_end(PMSG_RESTORE);
 	resume_console();
 
  Close:

kernel/power/hibernate_nvs.c

+/*
+ * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory
+ *
+ * Copyright (C) 2008,2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/suspend.h>
+
+/*
+ * Platforms, like ACPI, may want us to save some memory used by them during
+ * hibernation and to restore the contents of this memory during the subsequent
+ * resume.  The code below implements a mechanism allowing us to do that.
+ */
+
+struct nvs_page {
+	unsigned long phys_start;
+	unsigned int size;
+	void *kaddr;
+	void *data;
+	struct list_head node;
+};
+
+static LIST_HEAD(nvs_list);
+
+/**
+ *	hibernate_nvs_register - register platform NVS memory region to save
+ *	@start - physical address of the region
+ *	@size - size of the region
+ *
+ *	The NVS region need not be page-aligned (both ends) and we arrange
+ *	things so that the data from page-aligned addresses in this region will
+ *	be copied into separate RAM pages.
+ */
+int hibernate_nvs_register(unsigned long start, unsigned long size)
+{
+	struct nvs_page *entry, *next;
+
+	while (size > 0) {
+		unsigned int nr_bytes;
+
+		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
+		if (!entry)
+			goto Error;
+
+		list_add_tail(&entry->node, &nvs_list);
+		entry->phys_start = start;
+		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
+		entry->size = (size < nr_bytes) ? size : nr_bytes;
+
+		start += entry->size;
+		size -= entry->size;
+	}
+	return 0;
+
+ Error:
+	list_for_each_entry_safe(entry, next, &nvs_list, node) {
+		list_del(&entry->node);
+		kfree(entry);
+	}
+	return -ENOMEM;
+}
+
+/**
+ *	hibernate_nvs_free - free data pages allocated for saving NVS regions
+ */
+void hibernate_nvs_free(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			free_page((unsigned long)entry->data);
+			entry->data = NULL;
+			if (entry->kaddr) {
+				iounmap(entry->kaddr);
+				entry->kaddr = NULL;
+			}
+		}
+}
+
+/**
+ *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
+ */
+int hibernate_nvs_alloc(void)
+{
+	struct nvs_page *entry;
+
+	list_for_each_entry(entry, &nvs_list, node) {
+		entry->data = (void *)__get_free_page(GFP_KERNEL);
+		if (!entry->data) {
+			hibernate_nvs_free();
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	hibernate_nvs_save - save NVS memory regions
+ */
+void hibernate_nvs_save(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Saving platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data) {
+			entry->kaddr = ioremap(entry->phys_start, entry->size);
+			memcpy(entry->data, entry->kaddr, entry->size);
+		}
+}
+
+/**
+ *	hibernate_nvs_restore - restore NVS memory regions
+ *
+ *	This function is going to be called with interrupts disabled, so it
+ *	cannot iounmap the virtual addresses used to access the NVS region.
+ */
+void hibernate_nvs_restore(void)
+{
+	struct nvs_page *entry;
+
+	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
+
+	list_for_each_entry(entry, &nvs_list, node)
+		if (entry->data)
+			memcpy(entry->kaddr, entry->data, entry->size);
+}

kernel/power/power.h

@@ -45,7 +45,7 @@ static inline char *check_image_kernel(struct swsusp_info *info)
  */
 #define SPARE_PAGES	((1024 * 1024) >> PAGE_SHIFT)
 
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
 extern int hibernation_snapshot(int platform_mode);
 extern int hibernation_restore(int platform_mode);
 extern int hibernation_platform_enter(void);
@@ -74,7 +74,7 @@ extern asmlinkage int swsusp_arch_resume(void);
 
 extern int create_basic_memory_bitmaps(void);
 extern void free_basic_memory_bitmaps(void);
-extern unsigned int count_data_pages(void);
+extern int swsusp_shrink_memory(void);
 
 /**
  *	Auxiliary structure used for reading the snapshot image data and
@@ -147,9 +147,8 @@ extern int swsusp_swap_in_use(void);
  */
 #define SF_PLATFORM_MODE	1
 
-/* kernel/power/disk.c */
+/* kernel/power/hibernate.c */
 extern int swsusp_check(void);
-extern int swsusp_shrink_memory(void);
 extern void swsusp_free(void);
 extern int swsusp_read(unsigned int *flags_p);
 extern int swsusp_write(unsigned int flags);
@@ -161,22 +160,36 @@ extern void swsusp_show_speed(struct timeval *, struct timeval *,
 				unsigned int, char *);
 
 #ifdef CONFIG_SUSPEND
-/* kernel/power/main.c */
+/* kernel/power/suspend.c */
+extern const char *const pm_states[];
+
+extern bool valid_state(suspend_state_t state);
 extern int suspend_devices_and_enter(suspend_state_t state);
+extern int enter_state(suspend_state_t state);
 #else /* !CONFIG_SUSPEND */
 static inline int suspend_devices_and_enter(suspend_state_t state)
 {
 	return -ENOSYS;
 }
+static inline int enter_state(suspend_state_t state) { return -ENOSYS; }
+static inline bool valid_state(suspend_state_t state) { return false; }
 #endif /* !CONFIG_SUSPEND */
 
+#ifdef CONFIG_PM_TEST_SUSPEND
+/* kernel/power/suspend_test.c */
+extern void suspend_test_start(void);
+extern void suspend_test_finish(const char *label);
+#else /* !CONFIG_PM_TEST_SUSPEND */
+static inline void suspend_test_start(void) {}
+static inline void suspend_test_finish(const char *label) {}
+#endif /* !CONFIG_PM_TEST_SUSPEND */
+
 #ifdef CONFIG_PM_SLEEP
 /* kernel/power/main.c */
 extern int pm_notifier_call_chain(unsigned long val);
 #endif
 
 #ifdef CONFIG_HIGHMEM
-unsigned int count_highmem_pages(void);
 int restore_highmem(void);
 #else
 static inline unsigned int count_highmem_pages(void) { return 0; }

kernel/power/snapshot.c

@@ -39,6 +39,14 @@ static int swsusp_page_is_free(struct page *);
 static void swsusp_set_page_forbidden(struct page *);
 static void swsusp_unset_page_forbidden(struct page *);
 
+/*
+ * Preferred image size in bytes (tunable via /sys/power/image_size).
+ * When it is set to N, swsusp will do its best to ensure the image
+ * size will not exceed N bytes, but if that is impossible, it will
+ * try to create the smallest image possible.
+ */
+unsigned long image_size = 500 * 1024 * 1024;
+
 /* List of PBEs needed for restoring the pages that were allocated before
  * the suspend and included in the suspend image, but have also been
  * allocated by the "resume" kernel, so their contents cannot be written
@@ -840,7 +848,7 @@ static struct page *saveable_highmem_page(struct zone *zone, unsigned long pfn)
  *	pages.
  */
 
-unsigned int count_highmem_pages(void)
+static unsigned int count_highmem_pages(void)
 {
 	struct zone *zone;
 	unsigned int n = 0;
@@ -902,7 +910,7 @@ static struct page *saveable_page(struct zone *zone, unsigned long pfn)
  *	pages.
  */
 
-unsigned int count_data_pages(void)
+static unsigned int count_data_pages(void)
 {
 	struct zone *zone;
 	unsigned long pfn, max_zone_pfn;
@@ -1058,6 +1066,74 @@ void swsusp_free(void)
 	buffer = NULL;
 }
 
+/**
+ *	swsusp_shrink_memory -  Try to free as much memory as needed
+ *
+ *	... but do not OOM-kill anyone
+ *
+ *	Notice: all userland should be stopped before it is called, or
+ *	livelock is possible.
+ */
+
+#define SHRINK_BITE	10000
+static inline unsigned long __shrink_memory(long tmp)
+{
+	if (tmp > SHRINK_BITE)
+		tmp = SHRINK_BITE;
+	return shrink_all_memory(tmp);
+}
+
+int swsusp_shrink_memory(void)
+{
+	long tmp;
+	struct zone *zone;
+	unsigned long pages = 0;
+	unsigned int i = 0;
+	char *p = "-\\|/";
+	struct timeval start, stop;
+
+	printk(KERN_INFO "PM: Shrinking memory...  ");
+	do_gettimeofday(&start);
+	do {
+		long size, highmem_size;
+
+		highmem_size = count_highmem_pages();
+		size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
+		tmp = size;
+		size += highmem_size;
+		for_each_populated_zone(zone) {
+			tmp += snapshot_additional_pages(zone);
+			if (is_highmem(zone)) {
+				highmem_size -=
+					zone_page_state(zone, NR_FREE_PAGES);
+			} else {
+				tmp -= zone_page_state(zone, NR_FREE_PAGES);
+				tmp += zone->lowmem_reserve[ZONE_NORMAL];
+			}
+		}
+
+		if (highmem_size < 0)
+			highmem_size = 0;
+
+		tmp += highmem_size;
+		if (tmp > 0) {
+			tmp = __shrink_memory(tmp);
+			if (!tmp)
+				return -ENOMEM;
+			pages += tmp;
+		} else if (size > image_size / PAGE_SIZE) {
+			tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
+			pages += tmp;
+		}
+		printk("\b%c", p[i++%4]);
+	} while (tmp > 0);
+	do_gettimeofday(&stop);
+	printk("\bdone (%lu pages freed)\n", pages);
+	swsusp_show_speed(&start, &stop, pages, "Freed");
+
+	return 0;
+}
+
 #ifdef CONFIG_HIGHMEM
 /**
   *	count_pages_for_highmem - compute the number of non-highmem pages

kernel/power/suspend.c

+/*
+ * kernel/power/suspend.c - Suspend to RAM and standby functionality.
+ *
+ * Copyright (c) 2003 Patrick Mochel
+ * Copyright (c) 2003 Open Source Development Lab
+ * Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/cpu.h>
+#include <linux/syscalls.h>
+
+#include "power.h"
+
+const char *const pm_states[PM_SUSPEND_MAX] = {
+	[PM_SUSPEND_STANDBY]	= "standby",
+	[PM_SUSPEND_MEM]	= "mem",
+};
+
+static struct platform_suspend_ops *suspend_ops;
+
+/**
+ *	suspend_set_ops - Set the global suspend method table.
+ *	@ops:	Pointer to ops structure.
+ */
+void suspend_set_ops(struct platform_suspend_ops *ops)
+{
+	mutex_lock(&pm_mutex);
+	suspend_ops = ops;
+	mutex_unlock(&pm_mutex);
+}
+
+bool valid_state(suspend_state_t state)
+{
+	/*
+	 * All states need lowlevel support and need to be valid to the lowlevel
+	 * implementation, no valid callback implies that none are valid.
+	 */
+	return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
+}
+
+/**
+ * suspend_valid_only_mem - generic memory-only valid callback
+ *
+ * Platform drivers that implement mem suspend only and only need
+ * to check for that in their .valid callback can use this instead
+ * of rolling their own .valid callback.
+ */
+int suspend_valid_only_mem(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+static int suspend_test(int level)
+{
+#ifdef CONFIG_PM_DEBUG
+	if (pm_test_level == level) {
+		printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
+		mdelay(5000);
+		return 1;
+	}
+#endif /* !CONFIG_PM_DEBUG */
+	return 0;
+}
+
+/**
+ *	suspend_prepare - Do prep work before entering low-power state.
+ *
+ *	This is common code that is called for each state that we're entering.
+ *	Run suspend notifiers, allocate a console and stop all processes.
+ */
+static int suspend_prepare(void)
+{
+	int error;
+
+	if (!suspend_ops || !suspend_ops->enter)
+		return -EPERM;
+
+	pm_prepare_console();
+
+	error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
+	if (error)
+		goto Finish;
+
+	error = usermodehelper_disable();
+	if (error)
+		goto Finish;
+
+	error = suspend_freeze_processes();
+	if (!error)
+		return 0;
+
+	suspend_thaw_processes();
+	usermodehelper_enable();
+ Finish:
+	pm_notifier_call_chain(PM_POST_SUSPEND);
+	pm_restore_console();
+	return error;
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_disable_irqs(void)
+{
+	local_irq_disable();
+}
+
+/* default implementation */
+void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
+{
+	local_irq_enable();
+}
+
+/**
+ *	suspend_enter - enter the desired system sleep state.
+ *	@state:		state to enter
+ *
+ *	This function should be called after devices have been suspended.
+ */
+static int suspend_enter(suspend_state_t state)
+{
+	int error;
+
+	if (suspend_ops->prepare) {
+		error = suspend_ops->prepare();
+		if (error)
+			return error;
+	}
+
+	error = dpm_suspend_noirq(PMSG_SUSPEND);
+	if (error) {
+		printk(KERN_ERR "PM: Some devices failed to power down\n");
+		goto Platfrom_finish;
+	}
+
+	if (suspend_ops->prepare_late) {
+		error = suspend_ops->prepare_late();
+		if (error)
+			goto Power_up_devices;
+	}
+
+	if (suspend_test(TEST_PLATFORM))
+		goto Platform_wake;
+
+	error = disable_nonboot_cpus();
+	if (error || suspend_test(TEST_CPUS))
+		goto Enable_cpus;
+
+	arch_suspend_disable_irqs();
+	BUG_ON(!irqs_disabled());
+
+	error = sysdev_suspend(PMSG_SUSPEND);
+	if (!error) {
+		if (!suspend_test(TEST_CORE))
+			error = suspend_ops->enter(state);
+		sysdev_resume();
+	}
+
+	arch_suspend_enable_irqs();
+	BUG_ON(irqs_disabled());
+
+ Enable_cpus:
+	enable_nonboot_cpus();
+
+ Platform_wake:
+	if (suspend_ops->wake)
+		suspend_ops->wake();
+
+ Power_up_devices:
+	dpm_resume_noirq(PMSG_RESUME);
+
+ Platfrom_finish:
+	if (suspend_ops->finish)
+		suspend_ops->finish();
+
+	return error;
+}
+
+/**
+ *	suspend_devices_and_enter - suspend devices and enter the desired system
+ *				    sleep state.
+ *	@state:		  state to enter
+ */
+int suspend_devices_and_enter(suspend_state_t state)
+{
+	int error;
+
+	if (!suspend_ops)
+		return -ENOSYS;
+
+	if (suspend_ops->begin) {
+		error = suspend_ops->begin(state);
+		if (error)
+			goto Close;
+	}
+	suspend_console();
+	suspend_test_start();
+	error = dpm_suspend_start(PMSG_SUSPEND);
+	if (error) {
+		printk(KERN_ERR "PM: Some devices failed to suspend\n");
+		goto Recover_platform;
+	}
+	suspend_test_finish("suspend devices");
+	if (suspend_test(TEST_DEVICES))
+		goto Recover_platform;
+
+	suspend_enter(state);
+
+ Resume_devices:
+	suspend_test_start();
+	dpm_resume_end(PMSG_RESUME);
+	suspend_test_finish("resume devices");
+	resume_console();
+ Close:
+	if (suspend_ops->end)
+		suspend_ops->end();
+	return error;
+
+ Recover_platform:
+	if (suspend_ops->recover)
+		suspend_ops->recover();
+	goto Resume_devices;
+}
+
+/**
+ *	suspend_finish - Do final work before exiting suspend sequence.
+ *
+ *	Call platform code to clean up, restart processes, and free the
+ *	console that we've allocated. This is not called for suspend-to-disk.
+ */
+static void suspend_finish(void)
+{
+	suspend_thaw_processes();
+	usermodehelper_enable();
+	pm_notifier_call_chain(PM_POST_SUSPEND);
+	pm_restore_console();
+}
+
+/**
+ *	enter_state - Do common work of entering low-power state.
+ *	@state:		pm_state structure for state we're entering.
+ *
+ *	Make sure we're the only ones trying to enter a sleep state. Fail
+ *	if someone has beat us to it, since we don't want anything weird to
+ *	happen when we wake up.
+ *	Then, do the setup for suspend, enter the state, and cleaup (after
+ *	we've woken up).
+ */
+int enter_state(suspend_state_t state)
+{
+	int error;
+
+	if (!valid_state(state))
+		return -ENODEV;
+
+	if (!mutex_trylock(&pm_mutex))
+		return -EBUSY;
+
+	printk(KERN_INFO "PM: Syncing filesystems ... ");
+	sys_sync();
+	printk("done.\n");
+
+	pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
+	error = suspend_prepare();
+	if (error)
+		goto Unlock;
+
+	if (suspend_test(TEST_FREEZER))
+		goto Finish;
+
+	pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+	error = suspend_devices_and_enter(state);
+
+ Finish:
+	pr_debug("PM: Finishing wakeup.\n");
+	suspend_finish();
+ Unlock:
+	mutex_unlock(&pm_mutex);
+	return error;
+}
+
+/**
+ *	pm_suspend - Externally visible function for suspending system.
+ *	@state:		Enumerated value of state to enter.
+ *
+ *	Determine whether or not value is within range, get state
+ *	structure, and enter (above).
+ */
+int pm_suspend(suspend_state_t state)
+{
+	if (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX)
+		return enter_state(state);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(pm_suspend);

kernel/power/suspend_test.c

+/*
+ * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
+ *
+ * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/rtc.h>
+
+#include "power.h"
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending.  Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS	5
+
+static unsigned long suspend_test_start_time;
+
+void suspend_test_start(void)
+{
+	/* FIXME Use better timebase than "jiffies", ideally a clocksource.
+	 * What we want is a hardware counter that will work correctly even
+	 * during the irqs-are-off stages of the suspend/resume cycle...
+	 */
+	suspend_test_start_time = jiffies;
+}
+
+void suspend_test_finish(const char *label)
+{
+	long nj = jiffies - suspend_test_start_time;
+	unsigned msec;
+
+	msec = jiffies_to_msecs(abs(nj));
+	pr_info("PM: %s took %d.%03d seconds\n", label,
+			msec / 1000, msec % 1000);
+
+	/* Warning on suspend means the RTC alarm period needs to be
+	 * larger -- the system was sooo slooowwww to suspend that the
+	 * alarm (should have) fired before the system went to sleep!
+	 *
+	 * Warning on either suspend or resume also means the system
+	 * has some performance issues.  The stack dump of a WARN_ON
+	 * is more likely to get the right attention than a printk...
+	 */
+	WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
+}
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system.  RTCs wake alarms are a common self-contained mechanism.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+	static char err_readtime[] __initdata =
+		KERN_ERR "PM: can't read %s time, err %d\n";
+	static char err_wakealarm [] __initdata =
+		KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+	static char err_suspend[] __initdata =
+		KERN_ERR "PM: suspend test failed, error %d\n";
+	static char info_test[] __initdata =
+		KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+	unsigned long		now;
+	struct rtc_wkalrm	alm;
+	int			status;
+
+	/* this may fail if the RTC hasn't been initialized */
+	status = rtc_read_time(rtc, &alm.time);
+	if (status < 0) {
+		printk(err_readtime, dev_name(&rtc->dev), status);
+		return;
+	}
+	rtc_tm_to_time(&alm.time, &now);
+
+	memset(&alm, 0, sizeof alm);
+	rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+	alm.enabled = true;
+
+	status = rtc_set_alarm(rtc, &alm);
+	if (status < 0) {
+		printk(err_wakealarm, dev_name(&rtc->dev), status);
+		return;
+	}
+
+	if (state == PM_SUSPEND_MEM) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+		if (status == -ENODEV)
+			state = PM_SUSPEND_STANDBY;
+	}
+	if (state == PM_SUSPEND_STANDBY) {
+		printk(info_test, pm_states[state]);
+		status = pm_suspend(state);
+	}
+	if (status < 0)
+		printk(err_suspend, status);
+
+	/* Some platforms can't detect that the alarm triggered the
+	 * wakeup, or (accordingly) disable it after it afterwards.
+	 * It's supposed to give oneshot behavior; cope.
+	 */
+	alm.enabled = false;
+	rtc_set_alarm(rtc, &alm);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+	struct rtc_device *candidate = to_rtc_device(dev);
+
+	if (!candidate->ops->set_alarm)
+		return 0;
+	if (!device_may_wakeup(candidate->dev.parent))
+		return 0;
+
+	*(const char **)name_ptr = dev_name(dev);
+	return 1;
+}
+
+/*
+ * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
+ * at startup time.  They're normally disabled, for faster boot and because
+ * we can't know which states really work on this particular system.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
+
+static char warn_bad_state[] __initdata =
+	KERN_WARNING "PM: can't test '%s' suspend state\n";
+
+static int __init setup_test_suspend(char *value)
+{
+	unsigned i;
+
+	/* "=mem" ==> "mem" */
+	value++;
+	for (i = 0; i < PM_SUSPEND_MAX; i++) {
+		if (!pm_states[i])
+			continue;
+		if (strcmp(pm_states[i], value) != 0)
+			continue;
+		test_state = (__force suspend_state_t) i;
+		return 0;
+	}
+	printk(warn_bad_state, value);
+	return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+	static char		warn_no_rtc[] __initdata =
+		KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+	char			*pony = NULL;
+	struct rtc_device	*rtc = NULL;
+
+	/* PM is initialized by now; is that state testable? */
+	if (test_state == PM_SUSPEND_ON)
+		goto done;
+	if (!valid_state(test_state)) {
+		printk(warn_bad_state, pm_states[test_state]);
+		goto done;
+	}
+
+	/* RTCs have initialized by now too ... can we use one? */
+	class_find_device(rtc_class, NULL, &pony, has_wakealarm);
+	if (pony)
+		rtc = rtc_class_open(pony);
+	if (!rtc) {
+		printk(warn_no_rtc);
+		goto done;
+	}
+
+	/* go for it */
+	test_wakealarm(rtc, test_state);
+	rtc_class_close(rtc);
+done:
+	return 0;
+}
+late_initcall(test_suspend);

kernel/power/swsusp.c

@@ -55,14 +55,6 @@
 
 #include "power.h"
 
-/*
- * Preferred image size in bytes (tunable via /sys/power/image_size).
- * When it is set to N, swsusp will do its best to ensure the image
- * size will not exceed N bytes, but if that is impossible, it will
- * try to create the smallest image possible.
- */
-unsigned long image_size = 500 * 1024 * 1024;
-
 int in_suspend __nosavedata = 0;
 
 /**
@@ -194,193 +186,3 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop,
 			centisecs / 100, centisecs % 100,
 			kps / 1000, (kps % 1000) / 10);
 }
-
-/**
- *	swsusp_shrink_memory -  Try to free as much memory as needed
- *
- *	... but do not OOM-kill anyone
- *
- *	Notice: all userland should be stopped before it is called, or
- *	livelock is possible.
- */
-
-#define SHRINK_BITE	10000
-static inline unsigned long __shrink_memory(long tmp)
-{
-	if (tmp > SHRINK_BITE)
-		tmp = SHRINK_BITE;
-	return shrink_all_memory(tmp);
-}
-
-int swsusp_shrink_memory(void)
-{
-	long tmp;
-	struct zone *zone;
-	unsigned long pages = 0;
-	unsigned int i = 0;
-	char *p = "-\\|/";
-	struct timeval start, stop;
-
-	printk(KERN_INFO "PM: Shrinking memory...  ");
-	do_gettimeofday(&start);
-	do {
-		long size, highmem_size;
-
-		highmem_size = count_highmem_pages();
-		size = count_data_pages() + PAGES_FOR_IO + SPARE_PAGES;
-		tmp = size;
-		size += highmem_size;
-		for_each_populated_zone(zone) {
-			tmp += snapshot_additional_pages(zone);
-			if (is_highmem(zone)) {
-				highmem_size -=
-					zone_page_state(zone, NR_FREE_PAGES);
-			} else {
-				tmp -= zone_page_state(zone, NR_FREE_PAGES);
-				tmp += zone->lowmem_reserve[ZONE_NORMAL];
-			}
-		}
-
-		if (highmem_size < 0)
-			highmem_size = 0;
-
-		tmp += highmem_size;
-		if (tmp > 0) {
-			tmp = __shrink_memory(tmp);
-			if (!tmp)
-				return -ENOMEM;
-			pages += tmp;
-		} else if (size > image_size / PAGE_SIZE) {
-			tmp = __shrink_memory(size - (image_size / PAGE_SIZE));
-			pages += tmp;
-		}
-		printk("\b%c", p[i++%4]);
-	} while (tmp > 0);
-	do_gettimeofday(&stop);
-	printk("\bdone (%lu pages freed)\n", pages);
-	swsusp_show_speed(&start, &stop, pages, "Freed");
-
-	return 0;
-}
-
-/*
- * Platforms, like ACPI, may want us to save some memory used by them during
- * hibernation and to restore the contents of this memory during the subsequent
- * resume.  The code below implements a mechanism allowing us to do that.
- */
-
-struct nvs_page {
-	unsigned long phys_start;
-	unsigned int size;
-	void *kaddr;
-	void *data;
-	struct list_head node;
-};
-
-static LIST_HEAD(nvs_list);
-
-/**
- *	hibernate_nvs_register - register platform NVS memory region to save
- *	@start - physical address of the region
- *	@size - size of the region
- *
- *	The NVS region need not be page-aligned (both ends) and we arrange
- *	things so that the data from page-aligned addresses in this region will
- *	be copied into separate RAM pages.
- */
-int hibernate_nvs_register(unsigned long start, unsigned long size)
-{
-	struct nvs_page *entry, *next;
-
-	while (size > 0) {
-		unsigned int nr_bytes;
-
-		entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL);
-		if (!entry)
-			goto Error;
-
-		list_add_tail(&entry->node, &nvs_list);
-		entry->phys_start = start;
-		nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK);
-		entry->size = (size < nr_bytes) ? size : nr_bytes;
-
-		start += entry->size;
-		size -= entry->size;
-	}
-	return 0;
-
- Error:
-	list_for_each_entry_safe(entry, next, &nvs_list, node) {
-		list_del(&entry->node);
-		kfree(entry);
-	}
-	return -ENOMEM;
-}
-
-/**
- *	hibernate_nvs_free - free data pages allocated for saving NVS regions
- */
-void hibernate_nvs_free(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			free_page((unsigned long)entry->data);
-			entry->data = NULL;
-			if (entry->kaddr) {
-				iounmap(entry->kaddr);
-				entry->kaddr = NULL;
-			}
-		}
-}
-
-/**
- *	hibernate_nvs_alloc - allocate memory necessary for saving NVS regions
- */
-int hibernate_nvs_alloc(void)
-{
-	struct nvs_page *entry;
-
-	list_for_each_entry(entry, &nvs_list, node) {
-		entry->data = (void *)__get_free_page(GFP_KERNEL);
-		if (!entry->data) {
-			hibernate_nvs_free();
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-/**
- *	hibernate_nvs_save - save NVS memory regions
- */
-void hibernate_nvs_save(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Saving platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data) {
-			entry->kaddr = ioremap(entry->phys_start, entry->size);
-			memcpy(entry->data, entry->kaddr, entry->size);
-		}
-}
-
-/**
- *	hibernate_nvs_restore - restore NVS memory regions
- *
- *	This function is going to be called with interrupts disabled, so it
- *	cannot iounmap the virtual addresses used to access the NVS region.
- */
-void hibernate_nvs_restore(void)
-{
-	struct nvs_page *entry;
-
-	printk(KERN_INFO "PM: Restoring platform NVS memory\n");
-
-	list_for_each_entry(entry, &nvs_list, node)
-		if (entry->data)
-			memcpy(entry->kaddr, entry->data, entry->size);
-}

mm/vmscan.c

@@ -2056,7 +2056,7 @@ unsigned long global_lru_pages(void)
 		+ global_page_state(NR_INACTIVE_FILE);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_HIBERNATION
 /*
  * Helper function for shrink_all_memory().  Tries to reclaim 'nr_pages' pages
  * from LRU lists system-wide, for given pass and priority.
@@ -2196,7 +2196,7 @@ unsigned long shrink_all_memory(unsigned long nr_pages)
 
 	return sc.nr_reclaimed;
 }
-#endif
+#endif /* CONFIG_HIBERNATION */
 
 /* It's optimal to keep kswapds on the same CPUs as their memory, but
    not required for correctness.  So if the last cpu in a node goes