Merge tag 'usb-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v4.16 merge window

Not many changes here, the most important being an improvement for TI's
AM57xx and DRA7xx devices which allows them to disable a metastability
workaround in situations where we know what's going on.

Other than that, we have a set of changes on Renesas UDC to make the
code a little easier to read and maintain while also better supporting
extcon framework.

The u_serial adaptation layer learned to use kfifo instead of cooking
its own FIFO implementation.

DWC3 learned to decode a few more USB requests on the trace output.

Documentation/devicetree/bindings/usb/dwc3.txt

@@ -47,6 +47,8 @@ Optional properties:
 			from P0 to P1/P2/P3 without delay.
  - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
 			during HS transmit.
+ - snps,dis_metastability_quirk: when set, disable metastability workaround.
+			CAUTION: use only if you are absolutely sure of it.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold

drivers/usb/dwc2/core.h

@@ -929,6 +929,7 @@ struct dwc2_hsotg {
 	int     irq;
 	struct clk *clk;
 	struct reset_control *reset;
+	struct reset_control *reset_ecc;
 
 	unsigned int queuing_high_bandwidth:1;
 	unsigned int srp_success:1;
@@ -971,6 +972,7 @@ struct dwc2_hsotg {
 	} flags;
 
 	struct list_head non_periodic_sched_inactive;
+	struct list_head non_periodic_sched_waiting;
 	struct list_head non_periodic_sched_active;
 	struct list_head *non_periodic_qh_ptr;
 	struct list_head periodic_sched_inactive;

drivers/usb/dwc2/hcd.c

@@ -659,6 +659,10 @@ static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
 	list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive,
 			    qh_list_entry)
 		dev_dbg(hsotg->dev, "    %p\n", qh);
+	dev_dbg(hsotg->dev, "  NP waiting sched:\n");
+	list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting,
+			    qh_list_entry)
+		dev_dbg(hsotg->dev, "    %p\n", qh);
 	dev_dbg(hsotg->dev, "  NP active sched:\n");
 	list_for_each_entry(qh, &hsotg->non_periodic_sched_active,
 			    qh_list_entry)
@@ -1818,6 +1822,7 @@ static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg,
 static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg)
 {
 	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive);
+	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting);
 	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active);
 	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive);
 	dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready);
@@ -4998,6 +5003,7 @@ static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
 
 	/* Free memory for QH/QTD lists */
 	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive);
+	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting);
 	dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active);
 	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive);
 	dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready);
@@ -5159,6 +5165,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
 
 	/* Initialize the non-periodic schedule */
 	INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive);
+	INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting);
 	INIT_LIST_HEAD(&hsotg->non_periodic_sched_active);
 
 	/* Initialize the periodic schedule */

drivers/usb/dwc2/hcd.h

@@ -314,12 +314,16 @@ struct dwc2_hs_transfer_time {
  *                      descriptor and indicates original XferSize value for the
  *                      descriptor
  * @unreserve_timer:    Timer for releasing periodic reservation.
+ * @wait_timer:         Timer used to wait before re-queuing.
  * @dwc2_tt:            Pointer to our tt info (or NULL if no tt).
  * @ttport:             Port number within our tt.
  * @tt_buffer_dirty     True if clear_tt_buffer_complete is pending
  * @unreserve_pending:  True if we planned to unreserve but haven't yet.
  * @schedule_low_speed: True if we have a low/full speed component (either the
  *			host is in low/full speed mode or do_split).
+ * @want_wait:          We should wait before re-queuing; only matters for non-
+ *                      periodic transfers and is ignored for periodic ones.
+ * @wait_timer_cancel:  Set to true to cancel the wait_timer.
  *
  * A Queue Head (QH) holds the static characteristics of an endpoint and
  * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
@@ -354,11 +358,14 @@ struct dwc2_qh {
 	u32 desc_list_sz;
 	u32 *n_bytes;
 	struct timer_list unreserve_timer;
+	struct timer_list wait_timer;
 	struct dwc2_tt *dwc_tt;
 	int ttport;
 	unsigned tt_buffer_dirty:1;
 	unsigned unreserve_pending:1;
 	unsigned schedule_low_speed:1;
+	unsigned want_wait:1;
+	unsigned wait_timer_cancel:1;
 };
 
 /**
@@ -389,6 +396,7 @@ struct dwc2_qh {
  * @n_desc:             Number of DMA descriptors for this QTD
  * @isoc_frame_index_last: Last activated frame (packet) index, used in
  *                      descriptor DMA mode only
+ * @num_naks:           Number of NAKs received on this QTD.
  * @urb:                URB for this transfer
  * @qh:                 Queue head for this QTD
  * @qtd_list_entry:     For linking to the QH's list of QTDs
@@ -419,6 +427,7 @@ struct dwc2_qtd {
 	u8 error_count;
 	u8 n_desc;
 	u16 isoc_frame_index_last;
+	u16 num_naks;
 	struct dwc2_hcd_urb *urb;
 	struct dwc2_qh *qh;
 	struct list_head qtd_list_entry;

drivers/usb/dwc2/hcd_intr.c

@@ -53,6 +53,12 @@
 #include "core.h"
 #include "hcd.h"
 
+/*
+ * If we get this many NAKs on a split transaction we'll slow down
+ * retransmission.  A 1 here means delay after the first NAK.
+ */
+#define DWC2_NAKS_BEFORE_DELAY		3
+
 /* This function is for debug only */
 static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg)
 {
@@ -1201,11 +1207,25 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg,
 	/*
 	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
 	 * interrupt. Re-start the SSPLIT transfer.
+	 *
+	 * Normally for non-periodic transfers we'll retry right away, but to
+	 * avoid interrupt storms we'll wait before retrying if we've got
+	 * several NAKs. If we didn't do this we'd retry directly from the
+	 * interrupt handler and could end up quickly getting another
+	 * interrupt (another NAK), which we'd retry.
+	 *
+	 * Note that in DMA mode software only gets involved to re-send NAKed
+	 * transfers for split transactions, so we only need to apply this
+	 * delaying logic when handling splits. In non-DMA mode presumably we
+	 * might want a similar delay if someone can demonstrate this problem
+	 * affects that code path too.
 	 */
 	if (chan->do_split) {
 		if (chan->complete_split)
 			qtd->error_count = 0;
 		qtd->complete_split = 0;
+		qtd->num_naks++;
+		qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY;
 		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK);
 		goto handle_nak_done;
 	}

drivers/usb/dwc2/hcd_queue.c

@@ -58,6 +58,9 @@
 /* Wait this long before releasing periodic reservation */
 #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
 
+/* If we get a NAK, wait this long before retrying */
+#define DWC2_RETRY_WAIT_DELAY (msecs_to_jiffies(1))
+
 /**
  * dwc2_periodic_channel_available() - Checks that a channel is available for a
  * periodic transfer
@@ -1440,6 +1443,55 @@ static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg,
 	list_del_init(&qh->qh_list_entry);
 }
 
+/**
+ * dwc2_wait_timer_fn() - Timer function to re-queue after waiting
+ *
+ * As per the spec, a NAK indicates that "a function is temporarily unable to
+ * transmit or receive data, but will eventually be able to do so without need
+ * of host intervention".
+ *
+ * That means that when we encounter a NAK we're supposed to retry.
+ *
+ * ...but if we retry right away (from the interrupt handler that saw the NAK)
+ * then we can end up with an interrupt storm (if the other side keeps NAKing
+ * us) because on slow enough CPUs it could take us longer to get out of the
+ * interrupt routine than it takes for the device to send another NAK.  That
+ * leads to a constant stream of NAK interrupts and the CPU locks.
+ *
+ * ...so instead of retrying right away in the case of a NAK we'll set a timer
+ * to retry some time later.  This function handles that timer and moves the
+ * qh back to the "inactive" list, then queues transactions.
+ *
+ * @t: Pointer to wait_timer in a qh.
+ */
+static void dwc2_wait_timer_fn(struct timer_list *t)
+{
+	struct dwc2_qh *qh = from_timer(qh, t, wait_timer);
+	struct dwc2_hsotg *hsotg = qh->hsotg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
+	/*
+	 * We'll set wait_timer_cancel to true if we want to cancel this
+	 * operation in dwc2_hcd_qh_unlink().
+	 */
+	if (!qh->wait_timer_cancel) {
+		enum dwc2_transaction_type tr_type;
+
+		qh->want_wait = false;
+
+		list_move(&qh->qh_list_entry,
+			  &hsotg->non_periodic_sched_inactive);
+
+		tr_type = dwc2_hcd_select_transactions(hsotg);
+		if (tr_type != DWC2_TRANSACTION_NONE)
+			dwc2_hcd_queue_transactions(hsotg, tr_type);
+	}
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
 /**
  * dwc2_qh_init() - Initializes a QH structure
  *
@@ -1468,6 +1520,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 	/* Initialize QH */
 	qh->hsotg = hsotg;
 	timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0);
+	timer_setup(&qh->wait_timer, dwc2_wait_timer_fn, 0);
 	qh->ep_type = ep_type;
 	qh->ep_is_in = ep_is_in;
 
@@ -1628,6 +1681,16 @@ void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 		dwc2_do_unreserve(hsotg, qh);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 	}
+
+	/*
+	 * We don't have the lock so we can safely wait until the wait timer
+	 * finishes.  Of course, at this point in time we'd better have set
+	 * wait_timer_active to false so if this timer was still pending it
+	 * won't do anything anyway, but we want it to finish before we free
+	 * memory.
+	 */
+	del_timer_sync(&qh->wait_timer);
+
 	dwc2_host_put_tt_info(hsotg, qh->dwc_tt);
 
 	if (qh->desc_list)
@@ -1663,9 +1726,16 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 		qh->start_active_frame = hsotg->frame_number;
 		qh->next_active_frame = qh->start_active_frame;
 
-		/* Always start in inactive schedule */
-		list_add_tail(&qh->qh_list_entry,
-			      &hsotg->non_periodic_sched_inactive);
+		if (qh->want_wait) {
+			list_add_tail(&qh->qh_list_entry,
+				      &hsotg->non_periodic_sched_waiting);
+			qh->wait_timer_cancel = false;
+			mod_timer(&qh->wait_timer,
+				  jiffies + DWC2_RETRY_WAIT_DELAY + 1);
+		} else {
+			list_add_tail(&qh->qh_list_entry,
+				      &hsotg->non_periodic_sched_inactive);
+		}
 		return 0;
 	}
 
@@ -1695,6 +1765,9 @@ void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 
 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 
+	/* If the wait_timer is pending, this will stop it from acting */
+	qh->wait_timer_cancel = true;
+
 	if (list_empty(&qh->qh_list_entry))
 		/* QH is not in a schedule */
 		return;
@@ -1903,7 +1976,7 @@ void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 	if (dwc2_qh_is_non_per(qh)) {
 		dwc2_hcd_qh_unlink(hsotg, qh);
 		if (!list_empty(&qh->qtd_list))
-			/* Add back to inactive non-periodic schedule */
+			/* Add back to inactive/waiting non-periodic schedule */
 			dwc2_hcd_qh_add(hsotg, qh);
 		return;
 	}

drivers/usb/dwc2/platform.c

@@ -221,6 +221,15 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 
 	reset_control_deassert(hsotg->reset);
 
+	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
+	if (IS_ERR(hsotg->reset_ecc)) {
+		ret = PTR_ERR(hsotg->reset_ecc);
+		dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
+		return ret;
+	}
+
+	reset_control_deassert(hsotg->reset_ecc);
+
 	/* Set default UTMI width */
 	hsotg->phyif = GUSBCFG_PHYIF16;
 
@@ -319,6 +328,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 		dwc2_lowlevel_hw_disable(hsotg);
 
 	reset_control_assert(hsotg->reset);
+	reset_control_assert(hsotg->reset_ecc);
 
 	return 0;
 }

drivers/usb/dwc3/core.c

@@ -1062,6 +1062,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
 				 &dwc->fladj);
 
+	dwc->dis_metastability_quirk = device_property_read_bool(dev,
+				"snps,dis_metastability_quirk");
+
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
 

drivers/usb/dwc3/core.h

@@ -796,7 +796,6 @@ struct dwc3_scratchpad_array {
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
  * @ulpi: pointer to ulpi interface
- * @isoch_delay: wValue from Set Isochronous Delay request;
  * @u2sel: parameter from Set SEL request.
  * @u2pel: parameter from Set SEL request.
  * @u1sel: parameter from Set SEL request.
@@ -857,6 +856,7 @@ struct dwc3_scratchpad_array {
  * 	1	- -3.5dB de-emphasis
  * 	2	- No de-emphasis
  * 	3	- Reserved
+ * @dis_metastability_quirk: set to disable metastability quirk.
  * @imod_interval: set the interrupt moderation interval in 250ns
  *                 increments or 0 to disable.
  */
@@ -955,7 +955,6 @@ struct dwc3 {
 	enum dwc3_ep0_state	ep0state;
 	enum dwc3_link_state	link_state;
 
-	u16			isoch_delay;
 	u16			u2sel;
 	u16			u2pel;
 	u8			u1sel;
@@ -1010,6 +1009,8 @@ struct dwc3 {
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;
 
+	unsigned		dis_metastability_quirk:1;
+
 	u16			imod_interval;
 };
 

drivers/usb/dwc3/debug.h

@@ -247,6 +247,15 @@ static inline void dwc3_decode_set_clear_feature(__u8 t, __u8 b, __u16 v,
 				case USB_DEVICE_TEST_MODE:
 					s = "Test Mode";
 					break;
+				case USB_DEVICE_U1_ENABLE:
+					s = "U1 Enable";
+					break;
+				case USB_DEVICE_U2_ENABLE:
+					s = "U2 Enable";
+					break;
+				case USB_DEVICE_LTM_ENABLE:
+					s = "LTM Enable";
+					break;
 				default:
 					s = "UNKNOWN";
 				} s; }),

drivers/usb/dwc3/ep0.c

@@ -736,11 +736,7 @@ static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ct
 	if (wIndex || wLength)
 		return -EINVAL;
 
-	/*
-	 * REVISIT It's unclear from Databook what to do with this
-	 * value. For now, just cache it.
-	 */
-	dwc->isoch_delay = wValue;
+	dwc->gadget.isoch_delay = wValue;
 
 	return 0;
 }

drivers/usb/dwc3/gadget.c

@@ -2005,7 +2005,8 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
 	 * STAR#9000525659: Clock Domain Crossing on DCTL in
 	 * USB 2.0 Mode
 	 */
-	if (dwc->revision < DWC3_REVISION_220A) {
+	if (dwc->revision < DWC3_REVISION_220A &&
+	    !dwc->dis_metastability_quirk) {
 		reg |= DWC3_DCFG_SUPERSPEED;
 	} else {
 		switch (speed) {
@@ -3224,7 +3225,8 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	 * is less than super speed because we don't have means, yet, to tell
 	 * composite.c that we are USB 2.0 + LPM ECN.
 	 */
-	if (dwc->revision < DWC3_REVISION_220A)
+	if (dwc->revision < DWC3_REVISION_220A &&
+	    !dwc->dis_metastability_quirk)
 		dev_info(dwc->dev, "changing max_speed on rev %08x\n",
 				dwc->revision);
 

drivers/usb/dwc3/trace.h

@@ -37,12 +37,12 @@ DECLARE_EVENT_CLASS(dwc3_log_io,
 );
 
 DEFINE_EVENT(dwc3_log_io, dwc3_readl,
-	TP_PROTO(void *base, u32 offset, u32 value),
+	TP_PROTO(void __iomem *base, u32 offset, u32 value),
 	TP_ARGS(base, offset, value)
 );
 
 DEFINE_EVENT(dwc3_log_io, dwc3_writel,
-	TP_PROTO(void *base, u32 offset, u32 value),
+	TP_PROTO(void __iomem *base, u32 offset, u32 value),
 	TP_ARGS(base, offset, value)
 );
 

drivers/usb/gadget/function/f_fs.c

@@ -266,6 +266,7 @@ static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req)
 }
 
 static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
+	__releases(&ffs->ev.waitq.lock)
 {
 	struct usb_request *req = ffs->ep0req;
 	int ret;
@@ -458,6 +459,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 /* Called with ffs->ev.waitq.lock and ffs->mutex held, both released on exit. */
 static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
 				     size_t n)
+	__releases(&ffs->ev.waitq.lock)
 {
 	/*
 	 * n cannot be bigger than ffs->ev.count, which cannot be bigger than
@@ -543,6 +545,7 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 			break;
 		}
 
+		/* unlocks spinlock */
 		return __ffs_ep0_read_events(ffs, buf,
 					     min(n, (size_t)ffs->ev.count));
 
@@ -1246,7 +1249,7 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 		desc = epfile->ep->descs[desc_idx];
 
 		spin_unlock_irq(&epfile->ffs->eps_lock);
-		ret = copy_to_user((void *)value, desc, desc->bLength);
+		ret = copy_to_user((void __user *)value, desc, desc->bLength);
 		if (ret)
 			ret = -EFAULT;
 		return ret;
@@ -2324,7 +2327,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
 				  length, pnl, type);
 			return -EINVAL;
 		}
-		pdl = le32_to_cpu(*(u32 *)((u8 *)data + 10 + pnl));
+		pdl = le32_to_cpu(*(__le32 *)((u8 *)data + 10 + pnl));
 		if (length != 14 + pnl + pdl) {
 			pr_vdebug("invalid os descriptor length: %d pnl:%d pdl:%d (descriptor %d)\n",
 				  length, pnl, pdl, type);
@@ -2878,7 +2881,7 @@ static int __ffs_func_bind_do_os_desc(enum ffs_os_desc_type type,
 
 		ext_prop->type = le32_to_cpu(desc->dwPropertyDataType);
 		ext_prop->name_len = le16_to_cpu(desc->wPropertyNameLength);
-		ext_prop->data_len = le32_to_cpu(*(u32 *)
+		ext_prop->data_len = le32_to_cpu(*(__le32 *)
 			usb_ext_prop_data_len_ptr(data, ext_prop->name_len));
 		length = ext_prop->name_len + ext_prop->data_len + 14;
 

drivers/usb/gadget/function/u_serial.c

@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/console.h>
 #include <linux/kthread.h>
+#include <linux/kfifo.h>
 
 #include "u_serial.h"
 
@@ -80,19 +81,11 @@
 #define WRITE_BUF_SIZE		8192		/* TX only */
 #define GS_CONSOLE_BUF_SIZE	8192
 
-/* circular buffer */
-struct gs_buf {
-	unsigned		buf_size;
-	char			*buf_buf;
-	char			*buf_get;
-	char			*buf_put;
-};
-
 /* console info */
 struct gscons_info {
 	struct gs_port		*port;
 	struct task_struct	*console_thread;
-	struct gs_buf		con_buf;
+	struct kfifo		con_buf;
 	/* protect the buf and busy flag */
 	spinlock_t		con_lock;
 	int			req_busy;
@@ -122,7 +115,7 @@ struct gs_port {
 	struct list_head	write_pool;
 	int write_started;
 	int write_allocated;
-	struct gs_buf		port_write_buf;
+	struct kfifo		port_write_buf;
 	wait_queue_head_t	drain_wait;	/* wait while writes drain */
 	bool                    write_busy;
 	wait_queue_head_t	close_wait;
@@ -154,144 +147,6 @@ static struct portmaster {
 
 /*-------------------------------------------------------------------------*/
 
-/* Circular Buffer */
-
-/*
- * gs_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static int gs_buf_alloc(struct gs_buf *gb, unsigned size)
-{
-	gb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (gb->buf_buf == NULL)
-		return -ENOMEM;
-
-	gb->buf_size = size;
-	gb->buf_put = gb->buf_buf;
-	gb->buf_get = gb->buf_buf;
-
-	return 0;
-}
-
-/*
- * gs_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void gs_buf_free(struct gs_buf *gb)
-{
-	kfree(gb->buf_buf);
-	gb->buf_buf = NULL;
-}
-
-/*
- * gs_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void gs_buf_clear(struct gs_buf *gb)
-{
-	gb->buf_get = gb->buf_put;
-	/* equivalent to a get of all data available */
-}
-
-/*
- * gs_buf_data_avail
- *
- * Return the number of bytes of data written into the circular
- * buffer.
- */
-static unsigned gs_buf_data_avail(struct gs_buf *gb)
-{
-	return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
-}
-
-/*
- * gs_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned gs_buf_space_avail(struct gs_buf *gb)
-{
-	return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
-}
-
-/*
- * gs_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned
-gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count)
-{
-	unsigned len;
-
-	len  = gs_buf_space_avail(gb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = gb->buf_buf + gb->buf_size - gb->buf_put;
-	if (count > len) {
-		memcpy(gb->buf_put, buf, len);
-		memcpy(gb->buf_buf, buf+len, count - len);
-		gb->buf_put = gb->buf_buf + count - len;
-	} else {
-		memcpy(gb->buf_put, buf, count);
-		if (count < len)
-			gb->buf_put += count;
-		else /* count == len */
-			gb->buf_put = gb->buf_buf;
-	}
-
-	return count;
-}
-
-/*
- * gs_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned
-gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
-{
-	unsigned len;
-
-	len = gs_buf_data_avail(gb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = gb->buf_buf + gb->buf_size - gb->buf_get;
-	if (count > len) {
-		memcpy(buf, gb->buf_get, len);
-		memcpy(buf+len, gb->buf_buf, count - len);
-		gb->buf_get = gb->buf_buf + count - len;
-	} else {
-		memcpy(buf, gb->buf_get, count);
-		if (count < len)
-			gb->buf_get += count;
-		else /* count == len */
-			gb->buf_get = gb->buf_buf;
-	}
-
-	return count;
-}
-
-/*-------------------------------------------------------------------------*/
-
 /* I/O glue between TTY (upper) and USB function (lower) driver layers */
 
 /*
@@ -346,11 +201,11 @@ gs_send_packet(struct gs_port *port, char *packet, unsigned size)
 {
 	unsigned len;
 
-	len = gs_buf_data_avail(&port->port_write_buf);
+	len = kfifo_len(&port->port_write_buf);
 	if (len < size)
 		size = len;
 	if (size != 0)
-		size = gs_buf_get(&port->port_write_buf, packet, size);
+		size = kfifo_out(&port->port_write_buf, packet, size);
 	return size;
 }
 
@@ -398,7 +253,7 @@ __acquires(&port->port_lock)
 
 		req->length = len;
 		list_del(&req->list);
-		req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
+		req->zero = kfifo_is_empty(&port->port_write_buf);
 
 		pr_vdebug("ttyGS%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
 			  port->port_num, len, *((u8 *)req->buf),
@@ -787,10 +642,11 @@ static int gs_open(struct tty_struct *tty, struct file *file)
 	spin_lock_irq(&port->port_lock);
 
 	/* allocate circular buffer on first open */
-	if (port->port_write_buf.buf_buf == NULL) {
+	if (!kfifo_initialized(&port->port_write_buf)) {
 
 		spin_unlock_irq(&port->port_lock);
-		status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE);
+		status = kfifo_alloc(&port->port_write_buf,
+				     WRITE_BUF_SIZE, GFP_KERNEL);
 		spin_lock_irq(&port->port_lock);
 
 		if (status) {
@@ -839,7 +695,7 @@ static int gs_writes_finished(struct gs_port *p)
 
 	/* return true on disconnect or empty buffer */
 	spin_lock_irq(&p->port_lock);
-	cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf);
+	cond = (p->port_usb == NULL) || !kfifo_len(&p->port_write_buf);
 	spin_unlock_irq(&p->port_lock);
 
 	return cond;
@@ -875,7 +731,7 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	/* wait for circular write buffer to drain, disconnect, or at
 	 * most GS_CLOSE_TIMEOUT seconds; then discard the rest
 	 */
-	if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
+	if (kfifo_len(&port->port_write_buf) > 0 && gser) {
 		spin_unlock_irq(&port->port_lock);
 		wait_event_interruptible_timeout(port->drain_wait,
 					gs_writes_finished(port),
@@ -889,9 +745,9 @@ static void gs_close(struct tty_struct *tty, struct file *file)
 	 * let the push tasklet fire again until we're re-opened.
 	 */
 	if (gser == NULL)
-		gs_buf_free(&port->port_write_buf);
+		kfifo_free(&port->port_write_buf);
 	else
-		gs_buf_clear(&port->port_write_buf);
+		kfifo_reset(&port->port_write_buf);
 
 	port->port.tty = NULL;
 
@@ -915,7 +771,7 @@ static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
 
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (count)
-		count = gs_buf_put(&port->port_write_buf, buf, count);
+		count = kfifo_in(&port->port_write_buf, buf, count);
 	/* treat count == 0 as flush_chars() */
 	if (port->port_usb)
 		gs_start_tx(port);
@@ -934,7 +790,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch)
 		port->port_num, tty, ch, __builtin_return_address(0));
 
 	spin_lock_irqsave(&port->port_lock, flags);
-	status = gs_buf_put(&port->port_write_buf, &ch, 1);
+	status = kfifo_put(&port->port_write_buf, ch);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	return status;
@@ -961,7 +817,7 @@ static int gs_write_room(struct tty_struct *tty)
 
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (port->port_usb)
-		room = gs_buf_space_avail(&port->port_write_buf);
+		room = kfifo_avail(&port->port_write_buf);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	pr_vdebug("gs_write_room: (%d,%p) room=%d\n",
@@ -977,7 +833,7 @@ static int gs_chars_in_buffer(struct tty_struct *tty)
 	int		chars = 0;
 
 	spin_lock_irqsave(&port->port_lock, flags);
-	chars = gs_buf_data_avail(&port->port_write_buf);
+	chars = kfifo_len(&port->port_write_buf);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
@@ -1148,7 +1004,7 @@ static int gs_console_thread(void *data)
 		ep = port->port_usb->in;
 
 		spin_lock_irq(&info->con_lock);
-		count = gs_buf_data_avail(&info->con_buf);
+		count = kfifo_len(&info->con_buf);
 		size = ep->maxpacket;
 
 		if (count > 0 && !info->req_busy) {
@@ -1156,7 +1012,7 @@ static int gs_console_thread(void *data)
 			if (count < size)
 				size = count;
 
-			xfer = gs_buf_get(&info->con_buf, req->buf, size);
+			xfer = kfifo_out(&info->con_buf, req->buf, size);
 			req->length = xfer;
 
 			spin_unlock(&info->con_lock);
@@ -1192,7 +1048,7 @@ static int gs_console_setup(struct console *co, char *options)
 	info->req_busy = 0;
 	spin_lock_init(&info->con_lock);
 
-	status = gs_buf_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE);
+	status = kfifo_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE, GFP_KERNEL);
 	if (status) {
 		pr_err("%s: allocate console buffer failed\n", __func__);
 		return status;
@@ -1202,7 +1058,7 @@ static int gs_console_setup(struct console *co, char *options)
 					      co, "gs_console");
 	if (IS_ERR(info->console_thread)) {
 		pr_err("%s: cannot create console thread\n", __func__);
-		gs_buf_free(&info->con_buf);
+		kfifo_free(&info->con_buf);
 		return PTR_ERR(info->console_thread);
 	}
 	wake_up_process(info->console_thread);
@@ -1217,7 +1073,7 @@ static void gs_console_write(struct console *co,
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->con_lock, flags);
-	gs_buf_put(&info->con_buf, buf, count);
+	kfifo_in(&info->con_buf, buf, count);
 	spin_unlock_irqrestore(&info->con_lock, flags);
 
 	wake_up_process(info->console_thread);
@@ -1256,7 +1112,7 @@ static void gserial_console_exit(void)
 	unregister_console(&gserial_cons);
 	if (!IS_ERR_OR_NULL(info->console_thread))
 		kthread_stop(info->console_thread);
-	gs_buf_free(&info->con_buf);
+	kfifo_free(&info->con_buf);
 }
 
 #else
@@ -1529,7 +1385,7 @@ void gserial_disconnect(struct gserial *gser)
 	/* finally, free any unused/unusable I/O buffers */
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (port->port.count == 0 && !port->openclose)
-		gs_buf_free(&port->port_write_buf);
+		kfifo_free(&port->port_write_buf);
 	gs_free_requests(gser->out, &port->read_pool, NULL);
 	gs_free_requests(gser->out, &port->read_queue, NULL);
 	gs_free_requests(gser->in, &port->write_pool, NULL);

drivers/usb/gadget/legacy/inode.c

@@ -1470,7 +1470,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			dev->setup_wLength = w_length;
 			dev->setup_out_ready = 0;
 			dev->setup_out_error = 0;
-			value = 0;
 
 			/* read DATA stage for OUT right away */
 			if (unlikely (!dev->setup_in && w_length)) {

drivers/usb/gadget/udc/bcm63xx_udc.c

@@ -2385,10 +2385,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
 		goto out_uninit;
 	}
 	if (devm_request_irq(dev, irq, &bcm63xx_udc_ctrl_isr, 0,
-			     dev_name(dev), udc) < 0) {
-		dev_err(dev, "error requesting IRQ #%d\n", irq);
-		goto out_uninit;
-	}
+			     dev_name(dev), udc) < 0)
+		goto report_request_failure;
 
 	/* IRQ resources #1-6: data interrupts for IUDMA channels 0-5 */
 	for (i = 0; i < BCM63XX_NUM_IUDMA; i++) {
@@ -2398,10 +2396,8 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
 			goto out_uninit;
 		}
 		if (devm_request_irq(dev, irq, &bcm63xx_udc_data_isr, 0,
-				     dev_name(dev), &udc->iudma[i]) < 0) {
-			dev_err(dev, "error requesting IRQ #%d\n", irq);
-			goto out_uninit;
-		}
+				     dev_name(dev), &udc->iudma[i]) < 0)
+			goto report_request_failure;
 	}
 
 	bcm63xx_udc_init_debugfs(udc);
@@ -2413,6 +2409,10 @@ static int bcm63xx_udc_probe(struct platform_device *pdev)
 out_uninit:
 	bcm63xx_uninit_udc_hw(udc);
 	return rc;
+
+report_request_failure:
+	dev_err(dev, "error requesting IRQ #%d\n", irq);
+	goto out_uninit;
 }
 
 /**

drivers/usb/gadget/udc/dummy_hcd.c

@@ -925,20 +925,8 @@ static void dummy_udc_set_speed(struct usb_gadget *_gadget,
 	struct dummy	*dum;
 
 	dum = gadget_dev_to_dummy(&_gadget->dev);
-
-	 if (mod_data.is_super_speed)
-		 dum->gadget.speed = min_t(u8, USB_SPEED_SUPER, speed);
-	 else if (mod_data.is_high_speed)
-		 dum->gadget.speed = min_t(u8, USB_SPEED_HIGH, speed);
-	 else
-		 dum->gadget.speed = USB_SPEED_FULL;
-
+	dum->gadget.speed = speed;
 	dummy_udc_update_ep0(dum);
-
-	if (dum->gadget.speed < speed)
-		dev_dbg(udc_dev(dum), "This device can perform faster"
-			" if you connect it to a %s port...\n",
-			usb_speed_string(speed));
 }
 
 static int dummy_udc_start(struct usb_gadget *g,
@@ -2193,8 +2181,6 @@ static int dummy_hub_control(
 							USB_PORT_STAT_LOW_SPEED;
 						break;
 					default:
-						dum_hcd->dum->gadget.speed =
-							USB_SPEED_FULL;
 						break;
 					}
 				}

drivers/usb/gadget/udc/fsl_udc_core.c

@@ -1543,7 +1543,7 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
 		udc->ep0_state = WAIT_FOR_SETUP;
 		break;
 	case WAIT_FOR_SETUP:
-		ERR("Unexpect ep0 packets\n");
+		ERR("Unexpected ep0 packets\n");
 		break;
 	default:
 		ep0stall(udc);

drivers/usb/gadget/udc/pxa27x_udc.c

@@ -979,8 +979,6 @@ static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 
 	max = ep->fifo_size;
 	do {
-		is_short = 0;
-
 		udccsr = udc_ep_readl(ep, UDCCSR);
 		if (udccsr & UDCCSR_PC) {
 			ep_vdbg(ep, "Clearing Transmit Complete, udccsr=%x\n",
@@ -1134,7 +1132,6 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 	if (unlikely(!_ep))
 		return -EINVAL;
 
-	dev = udc_usb_ep->dev;
 	ep = udc_usb_ep->pxa_ep;
 	if (unlikely(!ep))
 		return -EINVAL;

drivers/usb/gadget/udc/trace.h

@@ -225,6 +225,7 @@ DECLARE_EVENT_CLASS(udc_log_req,
 		__field(unsigned, short_not_ok)
 		__field(int, status)
 		__field(int, ret)
+		__field(struct usb_request *, req)
 	),
 	TP_fast_assign(
 		snprintf(__get_str(name), UDC_TRACE_STR_MAX, "%s", ep->name);
@@ -238,9 +239,10 @@ DECLARE_EVENT_CLASS(udc_log_req,
 		__entry->short_not_ok = req->short_not_ok;
 		__entry->status = req->status;
 		__entry->ret = ret;
+		__entry->req = req;
 	),
-	TP_printk("%s: length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d",
-		__get_str(name), __entry->actual, __entry->length,
+	TP_printk("%s: req %p length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d",
+		__get_str(name),__entry->req,  __entry->actual, __entry->length,
 		__entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id,
 		__entry->zero ? "Z" : "z",
 		__entry->short_not_ok ? "S" : "s",

drivers/usb/gadget/udc/udc-xilinx.c

@@ -963,10 +963,8 @@ static struct usb_request *xudc_ep_alloc_request(struct usb_ep *_ep,
 						 gfp_t gfp_flags)
 {
 	struct xusb_ep *ep = to_xusb_ep(_ep);
-	struct xusb_udc *udc;
 	struct xusb_req *req;
 
-	udc = ep->udc;
 	req = kzalloc(sizeof(*req), gfp_flags);
 	if (!req)
 		return NULL;

drivers/usb/phy/phy.c

@@ -323,6 +323,14 @@ static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
 	return *phy == match_data;
 }
 
+static void usb_charger_init(struct usb_phy *usb_phy)
+{
+	usb_phy->chg_type = UNKNOWN_TYPE;
+	usb_phy->chg_state = USB_CHARGER_DEFAULT;
+	usb_phy_set_default_current(usb_phy);
+	INIT_WORK(&usb_phy->chg_work, usb_phy_notify_charger_work);
+}
+
 static int usb_add_extcon(struct usb_phy *x)
 {
 	int ret;
@@ -406,10 +414,6 @@ static int usb_add_extcon(struct usb_phy *x)
 		}
 	}
 
-	usb_phy_set_default_current(x);
-	INIT_WORK(&x->chg_work, usb_phy_notify_charger_work);
-	x->chg_type = UNKNOWN_TYPE;
-	x->chg_state = USB_CHARGER_DEFAULT;
 	if (x->type_nb.notifier_call)
 		__usb_phy_get_charger_type(x);
 
@@ -704,6 +708,7 @@ int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
 		return -EINVAL;
 	}
 
+	usb_charger_init(x);
 	ret = usb_add_extcon(x);
 	if (ret)
 		return ret;
@@ -749,6 +754,7 @@ int usb_add_phy_dev(struct usb_phy *x)
 		return -EINVAL;
 	}
 
+	usb_charger_init(x);
 	ret = usb_add_extcon(x);
 	if (ret)
 		return ret;

drivers/usb/renesas_usbhs/common.c

@@ -581,6 +581,15 @@ static int usbhs_probe(struct platform_device *pdev)
 		break;
 	case USBHS_TYPE_RCAR_GEN3_WITH_PLL:
 		priv->pfunc = usbhs_rcar3_with_pll_ops;
+		if (!IS_ERR_OR_NULL(priv->edev)) {
+			priv->nb.notifier_call = priv->pfunc.notifier;
+			ret = devm_extcon_register_notifier(&pdev->dev,
+							    priv->edev,
+							    EXTCON_USB_HOST,
+							    &priv->nb);
+			if (ret < 0)
+				dev_err(&pdev->dev, "no notifier registered\n");
+		}
 		break;
 	default:
 		if (!info->platform_callback.get_id) {

drivers/usb/renesas_usbhs/common.h

@@ -249,6 +249,7 @@ struct usbhs_priv {
 	struct platform_device *pdev;
 
 	struct extcon_dev *edev;
+	struct notifier_block nb;
 
 	spinlock_t		lock;
 

drivers/usb/renesas_usbhs/fifo.c

@@ -94,8 +94,6 @@ static struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe)
 	return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node);
 }
 
-static void usbhsf_fifo_clear(struct usbhs_pipe *pipe,
-			      struct usbhs_fifo *fifo);
 static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe,
 				 struct usbhs_fifo *fifo);
 static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
@@ -124,10 +122,11 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
 			chan = usbhsf_dma_chan_get(fifo, pkt);
 		if (chan) {
 			dmaengine_terminate_all(chan);
-			usbhsf_fifo_clear(pipe, fifo);
 			usbhsf_dma_unmap(pkt);
 		}
 
+		usbhs_pipe_clear_without_sequence(pipe, 0, 0);
+
 		__usbhsf_pkt_del(pkt);
 	}
 
@@ -256,15 +255,9 @@ static void usbhsf_send_terminator(struct usbhs_pipe *pipe,
 static int usbhsf_fifo_barrier(struct usbhs_priv *priv,
 			       struct usbhs_fifo *fifo)
 {
-	int timeout = 1024;
-
-	do {
-		/* The FIFO port is accessible */
-		if (usbhs_read(priv, fifo->ctr) & FRDY)
-			return 0;
-
-		udelay(10);
-	} while (timeout--);
+	/* The FIFO port is accessible */
+	if (usbhs_read(priv, fifo->ctr) & FRDY)
+		return 0;
 
 	return -EBUSY;
 }
@@ -278,8 +271,8 @@ static void usbhsf_fifo_clear(struct usbhs_pipe *pipe,
 	if (!usbhs_pipe_is_dcp(pipe)) {
 		/*
 		 * This driver checks the pipe condition first to avoid -EBUSY
-		 * from usbhsf_fifo_barrier() with about 10 msec delay in
-		 * the interrupt handler if the pipe is RX direction and empty.
+		 * from usbhsf_fifo_barrier() if the pipe is RX direction and
+		 * empty.
 		 */
 		if (usbhs_pipe_is_dir_in(pipe))
 			ret = usbhs_pipe_is_accessible(pipe);

drivers/usb/renesas_usbhs/pipe.c

@@ -590,10 +590,22 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe)
 	}
 }
 
-void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
+/* Should call usbhsp_pipe_select() before */
+void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
+				       int needs_bfre, int bfre_enable)
 {
 	int sequence;
 
+	usbhsp_pipe_select(pipe);
+	sequence = usbhs_pipe_get_data_sequence(pipe);
+	if (needs_bfre)
+		usbhsp_pipe_cfg_set(pipe, BFRE, bfre_enable ? BFRE : 0);
+	usbhs_pipe_clear(pipe);
+	usbhs_pipe_data_sequence(pipe, sequence);
+}
+
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
+{
 	if (usbhs_pipe_is_dcp(pipe))
 		return;
 
@@ -602,10 +614,7 @@ void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
 	if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
 		return;
 
-	sequence = usbhs_pipe_get_data_sequence(pipe);
-	usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0);
-	usbhs_pipe_clear(pipe);
-	usbhs_pipe_data_sequence(pipe, sequence);
+	usbhs_pipe_clear_without_sequence(pipe, 1, enable);
 }
 
 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)

drivers/usb/renesas_usbhs/pipe.h

@@ -80,6 +80,8 @@ void usbhs_pipe_init(struct usbhs_priv *priv,
 					 struct usbhs_pkt *pkt, int map));
 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe);
 void usbhs_pipe_clear(struct usbhs_pipe *pipe);
+void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
+				       int needs_bfre, int bfre_enable);
 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe);
 void usbhs_pipe_enable(struct usbhs_pipe *pipe);
 void usbhs_pipe_disable(struct usbhs_pipe *pipe);

drivers/usb/renesas_usbhs/rcar3.c

@@ -27,6 +27,7 @@
  * Remarks: bit[31:11] and bit[9:6] should be 0
  */
 #define UGCTRL2_RESERVED_3	0x00000001	/* bit[3:0] should be B'0001 */
+#define UGCTRL2_USB0SEL_EHCI	0x00000010
 #define UGCTRL2_USB0SEL_HSUSB	0x00000020
 #define UGCTRL2_USB0SEL_OTG	0x00000030
 #define UGCTRL2_VBUSSEL		0x00000400
@@ -44,13 +45,25 @@ static u32 usbhs_read32(struct usbhs_priv *priv, u32 reg)
 	return ioread32(priv->base + reg);
 }
 
+static void usbhs_rcar3_set_ugctrl2(struct usbhs_priv *priv, u32 val)
+{
+	usbhs_write32(priv, UGCTRL2, val | UGCTRL2_RESERVED_3);
+}
+
+static void usbhs_rcar3_set_usbsel(struct usbhs_priv *priv, bool ehci)
+{
+	if (ehci)
+		usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_EHCI);
+	else
+		usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_HSUSB);
+}
+
 static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
 				void __iomem *base, int enable)
 {
 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 
-	usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG |
-		      UGCTRL2_VBUSSEL);
+	usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
 
 	if (enable) {
 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
@@ -70,11 +83,14 @@ static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev,
 	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
 	u32 val;
 	int timeout = 1000;
+	bool is_host = false;
 
 	if (enable) {
 		usbhs_write32(priv, UGCTRL, 0);	/* release PLLRESET */
-		usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 |
-			      UGCTRL2_USB0SEL_HSUSB);
+		if (priv->edev)
+			is_host = extcon_get_state(priv->edev, EXTCON_USB_HOST);
+
+		usbhs_rcar3_set_usbsel(priv, is_host);
 
 		usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
 		do {
@@ -96,6 +112,16 @@ static int usbhs_rcar3_get_id(struct platform_device *pdev)
 	return USBHS_GADGET;
 }
 
+static int usbhs_rcar3_notifier(struct notifier_block *nb, unsigned long event,
+				void *data)
+{
+	struct usbhs_priv *priv = container_of(nb, struct usbhs_priv, nb);
+
+	usbhs_rcar3_set_usbsel(priv, !!event);
+
+	return NOTIFY_DONE;
+}
+
 const struct renesas_usbhs_platform_callback usbhs_rcar3_ops = {
 	.power_ctrl = usbhs_rcar3_power_ctrl,
 	.get_id = usbhs_rcar3_get_id,
@@ -104,4 +130,5 @@ const struct renesas_usbhs_platform_callback usbhs_rcar3_ops = {
 const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops = {
 	.power_ctrl = usbhs_rcar3_power_and_pll_ctrl,
 	.get_id = usbhs_rcar3_get_id,
+	.notifier = usbhs_rcar3_notifier,
 };

include/linux/usb/gadget.h

@@ -330,6 +330,7 @@ struct usb_gadget_ops {
  * @name: Identifies the controller hardware type.  Used in diagnostics
  *	and sometimes configuration.
  * @dev: Driver model state for this abstract device.
+ * @isoch_delay: value from Set Isoch Delay request. Only valid on SS/SSP
  * @out_epnum: last used out ep number
  * @in_epnum: last used in ep number
  * @mA: last set mA value
@@ -394,6 +395,7 @@ struct usb_gadget {
 	enum usb_device_state		state;
 	const char			*name;
 	struct device			dev;
+	unsigned			isoch_delay;
 	unsigned			out_epnum;
 	unsigned			in_epnum;
 	unsigned			mA;

include/linux/usb/renesas_usbhs.h

@@ -17,6 +17,7 @@
  */
 #ifndef RENESAS_USB_H
 #define RENESAS_USB_H
+#include <linux/notifier.h>
 #include <linux/platform_device.h>
 #include <linux/usb/ch9.h>
 
@@ -98,6 +99,13 @@ struct renesas_usbhs_platform_callback {
 	 * VBUS control is needed for Host
 	 */
 	int (*set_vbus)(struct platform_device *pdev, int enable);
+
+	/*
+	 * option:
+	 * extcon notifier to set host/peripheral mode.
+	 */
+	int (*notifier)(struct notifier_block *nb, unsigned long event,
+			void *data);
 };
 
 /*