Merge tag 'drm-intel-next-2023-06-05' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 features for v6.5:

Features and functionality:
- Meteorlake (MTL) display enabling (Mika, Radhakrishna, José, Ankit, Clint,
  Gustavo, Imre, Anusha, Juha-Pekka, Matt)
- Allow VRR to be toggled during fastsets (Ville)
- Allow arbitrary refresh rates with VRR eDP panels (Ville)
- Support async flips on linear buffers on display ver 12+  (Arun)
- New debugfs for display clock frequencies (Bhanuprakash)
- Taint kernel when force probing unsupported devices (Jani)
- Expose CRTC CTM property on ILK/SNB/VLV (Ville)

DRM subsystem changes:
- EDID changes to support further conversion to struct drm_edid (Jani)
- Move i915 DSC parameter code to common DRM helpers (Dmitry Baryshkov)

Refactoring and cleanups:
- CSC color refactoring (Ville)
- VRR cleanups (Ville)
- Finish i915 conversion to struct drm_edid (Jani)
- Start high level display driver file (Jani)
- Hotplug refactoring (Ville)
- Misc display refactoring and cleanups (Jani, Ville)
- Use device based logging for state checker warnings (Jani)
- Split out hotplug and display irq handling (Jani)
- Move display device info and probe under display/ (Matt)
- HDCP cleanups (Suraj)
- Use localized warning ignores instead of per file (Jani)
- Remove superfluous enum i915_drm_suspend_mode (Maarten)
- PSR, pfit, scaler and chicken register definition cleanups (Ville)
- Constify pointers to hwmon_channel_info (Krzysztof Kozlowski)
- Replace all non-returning strlcpy with strscpy (Azeem Shaikh)
- Refactor VBT aux channel and DDC pin mapping (Ville)
- Include cleanups (Jani)

Fixes:
- Fix modeset locking issue in DP MST HDCP (Suraj)
- Fix disconnected Type-C/DP-alt disable at probe (Imre)
- Fix HDMI PCON DSC usage and color conversions (Ankit)
- Fix g4x HDMI infoframe/audio transmission port usage (Ville)
- Avoid use-after-free when DP connector init fails (Maarten)
- Fix voltage level for 480 MHz CDCLK (Chaitanya)
- Check HPD live state during eDP probe (Ville)
- Fix active port PLL selection for secondary MST streams (Imre)
- Check pipe source size when using SKL+ scalers (Ville)
- Fix MIPI DSI sleep sequences (Hans de Goede)
- Fix DPCD register write order to match 128b/132b requirement (Arun)
- Increase AUX timeout for Type-C (Suraj)
- Communicate display power demands to pcode (Stan)
- Fix potential division by zero in DSC compute config (Nikita Zhandarovich)
- Fix fast wake AUX sync length (Jouni)
- Fix potential oops on intel_get_crtc_new_encoder() (Ville)

Merges:
- drm-next backmerges (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zg5eat32.fsf@intel.com

drivers/gpu/drm/display/drm_dp_mst_topology.c

@@ -1823,7 +1823,7 @@ static void drm_dp_destroy_port(struct kref *kref)
 		return;
 	}
 
-	kfree(port->cached_edid);
+	drm_edid_free(port->cached_edid);
 
 	/*
 	 * we can't destroy the connector here, as we might be holding the
@@ -2272,8 +2272,8 @@ drm_dp_mst_port_add_connector(struct drm_dp_mst_branch *mstb,
 	if (port->pdt != DP_PEER_DEVICE_NONE &&
 	    drm_dp_mst_is_end_device(port->pdt, port->mcs) &&
 	    port->port_num >= DP_MST_LOGICAL_PORT_0)
-		port->cached_edid = drm_get_edid(port->connector,
-						 &port->aux.ddc);
+		port->cached_edid = drm_edid_read_ddc(port->connector,
+						      &port->aux.ddc);
 
 	drm_connector_register(port->connector);
 	return;
@@ -4133,7 +4133,7 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
 		ret = connector_status_connected;
 		/* for logical ports - cache the EDID */
 		if (port->port_num >= DP_MST_LOGICAL_PORT_0 && !port->cached_edid)
-			port->cached_edid = drm_get_edid(connector, &port->aux.ddc);
+			port->cached_edid = drm_edid_read_ddc(connector, &port->aux.ddc);
 		break;
 	case DP_PEER_DEVICE_DP_LEGACY_CONV:
 		if (port->ldps)
@@ -4147,7 +4147,7 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
 EXPORT_SYMBOL(drm_dp_mst_detect_port);
 
 /**
- * drm_dp_mst_get_edid() - get EDID for an MST port
+ * drm_dp_mst_edid_read() - get EDID for an MST port
  * @connector: toplevel connector to get EDID for
  * @mgr: manager for this port
  * @port: unverified pointer to a port.
@@ -4156,9 +4156,11 @@ EXPORT_SYMBOL(drm_dp_mst_detect_port);
  * It validates the pointer still exists so the caller doesn't require a
  * reference.
  */
-struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
+const struct drm_edid *drm_dp_mst_edid_read(struct drm_connector *connector,
+					    struct drm_dp_mst_topology_mgr *mgr,
+					    struct drm_dp_mst_port *port)
 {
-	struct edid *edid = NULL;
+	const struct drm_edid *drm_edid;
 
 	/* we need to search for the port in the mgr in case it's gone */
 	port = drm_dp_mst_topology_get_port_validated(mgr, port);
@@ -4166,12 +4168,41 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_
 		return NULL;
 
 	if (port->cached_edid)
-		edid = drm_edid_duplicate(port->cached_edid);
-	else {
-		edid = drm_get_edid(connector, &port->aux.ddc);
-	}
-	port->has_audio = drm_detect_monitor_audio(edid);
+		drm_edid = drm_edid_dup(port->cached_edid);
+	else
+		drm_edid = drm_edid_read_ddc(connector, &port->aux.ddc);
+
 	drm_dp_mst_topology_put_port(port);
+
+	return drm_edid;
+}
+EXPORT_SYMBOL(drm_dp_mst_edid_read);
+
+/**
+ * drm_dp_mst_get_edid() - get EDID for an MST port
+ * @connector: toplevel connector to get EDID for
+ * @mgr: manager for this port
+ * @port: unverified pointer to a port.
+ *
+ * This function is deprecated; please use drm_dp_mst_edid_read() instead.
+ *
+ * This returns an EDID for the port connected to a connector,
+ * It validates the pointer still exists so the caller doesn't require a
+ * reference.
+ */
+struct edid *drm_dp_mst_get_edid(struct drm_connector *connector,
+				 struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_dp_mst_port *port)
+{
+	const struct drm_edid *drm_edid;
+	struct edid *edid;
+
+	drm_edid = drm_dp_mst_edid_read(connector, mgr, port);
+
+	edid = drm_edid_duplicate(drm_edid_raw(drm_edid));
+
+	drm_edid_free(drm_edid);
+
 	return edid;
 }
 EXPORT_SYMBOL(drm_dp_mst_get_edid);

drivers/gpu/drm/drm_edid.c

@@ -2844,6 +2844,35 @@ struct edid *drm_get_edid_switcheroo(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_get_edid_switcheroo);
 
+/**
+ * drm_edid_read_switcheroo - get EDID data for a vga_switcheroo output
+ * @connector: connector we're probing
+ * @adapter: I2C adapter to use for DDC
+ *
+ * Wrapper around drm_edid_read_ddc() for laptops with dual GPUs using one set
+ * of outputs. The wrapper adds the requisite vga_switcheroo calls to
+ * temporarily switch DDC to the GPU which is retrieving EDID.
+ *
+ * Return: Pointer to valid EDID or %NULL if we couldn't find any.
+ */
+const struct drm_edid *drm_edid_read_switcheroo(struct drm_connector *connector,
+						struct i2c_adapter *adapter)
+{
+	struct drm_device *dev = connector->dev;
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
+	const struct drm_edid *drm_edid;
+
+	if (drm_WARN_ON_ONCE(dev, !dev_is_pci(dev->dev)))
+		return NULL;
+
+	vga_switcheroo_lock_ddc(pdev);
+	drm_edid = drm_edid_read_ddc(connector, adapter);
+	vga_switcheroo_unlock_ddc(pdev);
+
+	return drm_edid;
+}
+EXPORT_SYMBOL(drm_edid_read_switcheroo);
+
 /**
  * drm_edid_duplicate - duplicate an EDID and the extensions
  * @edid: EDID to duplicate
@@ -2852,6 +2881,9 @@ EXPORT_SYMBOL(drm_get_edid_switcheroo);
  */
 struct edid *drm_edid_duplicate(const struct edid *edid)
 {
+	if (!edid)
+		return NULL;
+
 	return kmemdup(edid, edid_size(edid), GFP_KERNEL);
 }
 EXPORT_SYMBOL(drm_edid_duplicate);
@@ -6243,6 +6275,9 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 			info->color_formats |= DRM_COLOR_FORMAT_YCBCR444;
 		if (edid_ext[3] & EDID_CEA_YCRCB422)
 			info->color_formats |= DRM_COLOR_FORMAT_YCBCR422;
+		if (edid_ext[3] & EDID_BASIC_AUDIO)
+			info->has_audio = true;
+
 	}
 	drm_edid_iter_end(&edid_iter);
 
@@ -6268,6 +6303,8 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 			drm_parse_hdr_metadata_block(connector, data);
 		else if (cea_db_tag(db) == CTA_DB_VIDEO)
 			parse_cta_vdb(connector, db);
+		else if (cea_db_tag(db) == CTA_DB_AUDIO)
+			info->has_audio = true;
 	}
 	cea_db_iter_end(&iter);
 
@@ -6424,6 +6461,7 @@ static void drm_reset_display_info(struct drm_connector *connector)
 	info->max_tmds_clock = 0;
 	info->dvi_dual = false;
 	info->is_hdmi = false;
+	info->has_audio = false;
 	info->has_hdmi_infoframe = false;
 	info->rgb_quant_range_selectable = false;
 	memset(&info->hdmi, 0, sizeof(info->hdmi));

drivers/gpu/drm/i915/Makefile

@@ -23,10 +23,6 @@ subdir-ccflags-y += $(call cc-disable-warning, unused-but-set-variable)
 subdir-ccflags-y += $(call cc-disable-warning, frame-address)
 subdir-ccflags-$(CONFIG_DRM_I915_WERROR) += -Werror
 
-# Fine grained warnings disable
-CFLAGS_i915_pci.o = $(call cc-disable-warning, override-init)
-CFLAGS_display/intel_fbdev.o = $(call cc-disable-warning, override-init)
-
 subdir-ccflags-y += -I$(srctree)/$(src)
 
 # Please keep these build lists sorted!
@@ -238,9 +234,12 @@ i915-y += \
 	display/intel_crtc_state_dump.o \
 	display/intel_cursor.o \
 	display/intel_display.o \
+	display/intel_display_driver.o \
+	display/intel_display_irq.o \
 	display/intel_display_power.o \
 	display/intel_display_power_map.o \
 	display/intel_display_power_well.o \
+	display/intel_display_reset.o \
 	display/intel_display_rps.o \
 	display/intel_dmc.o \
 	display/intel_dpio_phy.o \
@@ -259,8 +258,11 @@ i915-y += \
 	display/intel_hdcp.o \
 	display/intel_hdcp_gsc.o \
 	display/intel_hotplug.o \
+	display/intel_hotplug_irq.o \
 	display/intel_hti.o \
+	display/intel_load_detect.o \
 	display/intel_lpe_audio.o \
+	display/intel_modeset_lock.o \
 	display/intel_modeset_verify.o \
 	display/intel_modeset_setup.o \
 	display/intel_overlay.o \
@@ -299,8 +301,10 @@ i915-y += \
 	display/icl_dsi.o \
 	display/intel_backlight.o \
 	display/intel_crt.o \
+	display/intel_cx0_phy.o \
 	display/intel_ddi.o \
 	display/intel_ddi_buf_trans.o \
+	display/intel_display_device.o \
 	display/intel_display_trace.o \
 	display/intel_dkl_phy.o \
 	display/intel_dp.o \

drivers/gpu/drm/i915/display/g4x_dp.c

@@ -169,7 +169,7 @@ static void assert_dp_port(struct intel_dp *intel_dp, bool state)
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	bool cur_state = intel_de_read(dev_priv, intel_dp->output_reg) & DP_PORT_EN;
 
-	I915_STATE_WARN(cur_state != state,
+	I915_STATE_WARN(dev_priv, cur_state != state,
 			"[ENCODER:%d:%s] state assertion failure (expected %s, current %s)\n",
 			dig_port->base.base.base.id, dig_port->base.base.name,
 			str_on_off(state), str_on_off(cur_state));
@@ -180,7 +180,7 @@ static void assert_edp_pll(struct drm_i915_private *dev_priv, bool state)
 {
 	bool cur_state = intel_de_read(dev_priv, DP_A) & DP_PLL_ENABLE;
 
-	I915_STATE_WARN(cur_state != state,
+	I915_STATE_WARN(dev_priv, cur_state != state,
 			"eDP PLL state assertion failure (expected %s, current %s)\n",
 			str_on_off(state), str_on_off(cur_state));
 }

drivers/gpu/drm/i915/display/g4x_hdmi.c

@@ -7,6 +7,7 @@
 
 #include "g4x_hdmi.h"
 #include "i915_reg.h"
+#include "intel_atomic.h"
 #include "intel_audio.h"
 #include "intel_connector.h"
 #include "intel_crtc.h"
@@ -80,15 +81,67 @@ static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
 	return ret;
 }
 
+static bool connector_is_hdmi(struct drm_connector *connector)
+{
+	struct intel_encoder *encoder =
+		intel_attached_encoder(to_intel_connector(connector));
+
+	return encoder && encoder->type == INTEL_OUTPUT_HDMI;
+}
+
+static bool g4x_compute_has_hdmi_sink(struct intel_atomic_state *state,
+				      struct intel_crtc *this_crtc)
+{
+	const struct drm_connector_state *conn_state;
+	struct drm_connector *connector;
+	int i;
+
+	/*
+	 * On g4x only one HDMI port can transmit infoframes/audio at
+	 * any given time. Select the first suitable port for this duty.
+	 *
+	 * See also g4x_hdmi_connector_atomic_check().
+	 */
+	for_each_new_connector_in_state(&state->base, connector, conn_state, i) {
+		struct intel_encoder *encoder = to_intel_encoder(conn_state->best_encoder);
+		const struct intel_crtc_state *crtc_state;
+		struct intel_crtc *crtc;
+
+		if (!connector_is_hdmi(connector))
+			continue;
+
+		crtc = to_intel_crtc(conn_state->crtc);
+		if (!crtc)
+			continue;
+
+		crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
+
+		if (!intel_hdmi_compute_has_hdmi_sink(encoder, crtc_state, conn_state))
+			continue;
+
+		return crtc == this_crtc;
+	}
+
+	return false;
+}
+
 static int g4x_hdmi_compute_config(struct intel_encoder *encoder,
 				   struct intel_crtc_state *crtc_state,
 				   struct drm_connector_state *conn_state)
 {
+	struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 
 	if (HAS_PCH_SPLIT(i915))
 		crtc_state->has_pch_encoder = true;
 
+	if (IS_G4X(i915))
+		crtc_state->has_hdmi_sink = g4x_compute_has_hdmi_sink(state, crtc);
+	else
+		crtc_state->has_hdmi_sink =
+			intel_hdmi_compute_has_hdmi_sink(encoder, crtc_state, conn_state);
+
 	return intel_hdmi_compute_config(encoder, crtc_state, conn_state);
 }
 
@@ -546,6 +599,66 @@ intel_hdmi_hotplug(struct intel_encoder *encoder,
 	return state;
 }
 
+int g4x_hdmi_connector_atomic_check(struct drm_connector *connector,
+				    struct drm_atomic_state *state)
+{
+	struct drm_i915_private *i915 = to_i915(state->dev);
+	struct drm_connector_list_iter conn_iter;
+	struct drm_connector *conn;
+	int ret;
+
+	ret = intel_digital_connector_atomic_check(connector, state);
+	if (ret)
+		return ret;
+
+	if (!IS_G4X(i915))
+		return 0;
+
+	if (!intel_connector_needs_modeset(to_intel_atomic_state(state), connector))
+		return 0;
+
+	/*
+	 * On g4x only one HDMI port can transmit infoframes/audio
+	 * at any given time. Make sure all enabled HDMI ports are
+	 * included in the state so that it's possible to select
+	 * one of them for this duty.
+	 *
+	 * See also g4x_compute_has_hdmi_sink().
+	 */
+	drm_connector_list_iter_begin(&i915->drm, &conn_iter);
+	drm_for_each_connector_iter(conn, &conn_iter) {
+		struct drm_connector_state *conn_state;
+		struct drm_crtc_state *crtc_state;
+		struct drm_crtc *crtc;
+
+		if (!connector_is_hdmi(conn))
+			continue;
+
+		drm_dbg_kms(&i915->drm, "Adding [CONNECTOR:%d:%s]\n",
+			    conn->base.id, conn->name);
+
+		conn_state = drm_atomic_get_connector_state(state, conn);
+		if (IS_ERR(conn_state)) {
+			ret = PTR_ERR(conn_state);
+			break;
+		}
+
+		crtc = conn_state->crtc;
+		if (!crtc)
+			continue;
+
+		crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+		crtc_state->mode_changed = true;
+
+		ret = drm_atomic_add_affected_planes(state, crtc);
+		if (ret)
+			break;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	return ret;
+}
+
 void g4x_hdmi_init(struct drm_i915_private *dev_priv,
 		   i915_reg_t hdmi_reg, enum port port)
 {

drivers/gpu/drm/i915/display/g4x_hdmi.h

@@ -11,9 +11,13 @@
 #include "i915_reg_defs.h"
 
 enum port;
+struct drm_atomic_state;
+struct drm_connector;
 struct drm_i915_private;
 
 void g4x_hdmi_init(struct drm_i915_private *dev_priv,
 		   i915_reg_t hdmi_reg, enum port port);
+int g4x_hdmi_connector_atomic_check(struct drm_connector *connector,
+				    struct drm_atomic_state *state);
 
 #endif

drivers/gpu/drm/i915/display/i9xx_plane.c

@@ -8,12 +8,12 @@
 #include <drm/drm_blend.h>
 #include <drm/drm_fourcc.h>
 
-#include "i915_irq.h"
 #include "i915_reg.h"
 #include "i9xx_plane.h"
 #include "intel_atomic.h"
 #include "intel_atomic_plane.h"
 #include "intel_de.h"
+#include "intel_display_irq.h"
 #include "intel_display_types.h"
 #include "intel_fb.h"
 #include "intel_fbc.h"

drivers/gpu/drm/i915/display/i9xx_wm.c

@@ -4,6 +4,7 @@
  */
 
 #include "i915_drv.h"
+#include "i915_reg.h"
 #include "i9xx_wm.h"
 #include "intel_atomic.h"
 #include "intel_display.h"
@@ -3447,9 +3448,10 @@ void ilk_wm_sanitize(struct drm_i915_private *dev_priv)
 
 	drm_modeset_acquire_init(&ctx, 0);
 
-retry:
 	state->acquire_ctx = &ctx;
+	to_intel_atomic_state(state)->internal = true;
 
+retry:
 	/*
 	 * Hardware readout is the only time we don't want to calculate
 	 * intermediate watermarks (since we don't trust the current

drivers/gpu/drm/i915/display/i9xx_wm.h

@@ -12,7 +12,6 @@ struct drm_i915_private;
 struct intel_crtc_state;
 struct intel_plane_state;
 
-int ilk_wm_max_level(const struct drm_i915_private *i915);
 bool ilk_disable_lp_wm(struct drm_i915_private *i915);
 void ilk_wm_sanitize(struct drm_i915_private *i915);
 bool intel_set_memory_cxsr(struct drm_i915_private *i915, bool enable);

drivers/gpu/drm/i915/display/icl_dsi.c

@@ -1591,6 +1591,7 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 		&pipe_config->hw.adjusted_mode;
 	int ret;
 
+	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
 	ret = intel_panel_compute_config(intel_connector, adjusted_mode);

drivers/gpu/drm/i915/display/intel_atomic.c

@@ -265,7 +265,6 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
 	crtc_state->update_wm_post = false;
 	crtc_state->fifo_changed = false;
 	crtc_state->preload_luts = false;
-	crtc_state->inherited = false;
 	crtc_state->wm.need_postvbl_update = false;
 	crtc_state->do_async_flip = false;
 	crtc_state->fb_bits = 0;
@@ -311,262 +310,6 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
 	kfree(crtc_state);
 }
 
-static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
-				     int num_scalers_need, struct intel_crtc *intel_crtc,
-				     const char *name, int idx,
-				     struct intel_plane_state *plane_state,
-				     int *scaler_id)
-{
-	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
-	int j;
-	u32 mode;
-
-	if (*scaler_id < 0) {
-		/* find a free scaler */
-		for (j = 0; j < intel_crtc->num_scalers; j++) {
-			if (scaler_state->scalers[j].in_use)
-				continue;
-
-			*scaler_id = j;
-			scaler_state->scalers[*scaler_id].in_use = 1;
-			break;
-		}
-	}
-
-	if (drm_WARN(&dev_priv->drm, *scaler_id < 0,
-		     "Cannot find scaler for %s:%d\n", name, idx))
-		return -EINVAL;
-
-	/* set scaler mode */
-	if (plane_state && plane_state->hw.fb &&
-	    plane_state->hw.fb->format->is_yuv &&
-	    plane_state->hw.fb->format->num_planes > 1) {
-		struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
-		if (DISPLAY_VER(dev_priv) == 9) {
-			mode = SKL_PS_SCALER_MODE_NV12;
-		} else if (icl_is_hdr_plane(dev_priv, plane->id)) {
-			/*
-			 * On gen11+'s HDR planes we only use the scaler for
-			 * scaling. They have a dedicated chroma upsampler, so
-			 * we don't need the scaler to upsample the UV plane.
-			 */
-			mode = PS_SCALER_MODE_NORMAL;
-		} else {
-			struct intel_plane *linked =
-				plane_state->planar_linked_plane;
-
-			mode = PS_SCALER_MODE_PLANAR;
-
-			if (linked)
-				mode |= PS_PLANE_Y_SEL(linked->id);
-		}
-	} else if (DISPLAY_VER(dev_priv) >= 10) {
-		mode = PS_SCALER_MODE_NORMAL;
-	} else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
-		/*
-		 * when only 1 scaler is in use on a pipe with 2 scalers
-		 * scaler 0 operates in high quality (HQ) mode.
-		 * In this case use scaler 0 to take advantage of HQ mode
-		 */
-		scaler_state->scalers[*scaler_id].in_use = 0;
-		*scaler_id = 0;
-		scaler_state->scalers[0].in_use = 1;
-		mode = SKL_PS_SCALER_MODE_HQ;
-	} else {
-		mode = SKL_PS_SCALER_MODE_DYN;
-	}
-
-	/*
-	 * FIXME: we should also check the scaler factors for pfit, so
-	 * this shouldn't be tied directly to planes.
-	 */
-	if (plane_state && plane_state->hw.fb) {
-		const struct drm_framebuffer *fb = plane_state->hw.fb;
-		const struct drm_rect *src = &plane_state->uapi.src;
-		const struct drm_rect *dst = &plane_state->uapi.dst;
-		int hscale, vscale, max_vscale, max_hscale;
-
-		/*
-		 * FIXME: When two scalers are needed, but only one of
-		 * them needs to downscale, we should make sure that
-		 * the one that needs downscaling support is assigned
-		 * as the first scaler, so we don't reject downscaling
-		 * unnecessarily.
-		 */
-
-		if (DISPLAY_VER(dev_priv) >= 14) {
-			/*
-			 * On versions 14 and up, only the first
-			 * scaler supports a vertical scaling factor
-			 * of more than 1.0, while a horizontal
-			 * scaling factor of 3.0 is supported.
-			 */
-			max_hscale = 0x30000 - 1;
-			if (*scaler_id == 0)
-				max_vscale = 0x30000 - 1;
-			else
-				max_vscale = 0x10000;
-
-		} else if (DISPLAY_VER(dev_priv) >= 10 ||
-			   !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) {
-			max_hscale = 0x30000 - 1;
-			max_vscale = 0x30000 - 1;
-		} else {
-			max_hscale = 0x20000 - 1;
-			max_vscale = 0x20000 - 1;
-		}
-
-		/*
-		 * FIXME: We should change the if-else block above to
-		 * support HQ vs dynamic scaler properly.
-		 */
-
-		/* Check if required scaling is within limits */
-		hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale);
-		vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale);
-
-		if (hscale < 0 || vscale < 0) {
-			drm_dbg_kms(&dev_priv->drm,
-				    "Scaler %d doesn't support required plane scaling\n",
-				    *scaler_id);
-			drm_rect_debug_print("src: ", src, true);
-			drm_rect_debug_print("dst: ", dst, false);
-
-			return -EINVAL;
-		}
-	}
-
-	drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n",
-		    intel_crtc->pipe, *scaler_id, name, idx);
-	scaler_state->scalers[*scaler_id].mode = mode;
-
-	return 0;
-}
-
-/**
- * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
- * @dev_priv: i915 device
- * @intel_crtc: intel crtc
- * @crtc_state: incoming crtc_state to validate and setup scalers
- *
- * This function sets up scalers based on staged scaling requests for
- * a @crtc and its planes. It is called from crtc level check path. If request
- * is a supportable request, it attaches scalers to requested planes and crtc.
- *
- * This function takes into account the current scaler(s) in use by any planes
- * not being part of this atomic state
- *
- *  Returns:
- *         0 - scalers were setup succesfully
- *         error code - otherwise
- */
-int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
-			       struct intel_crtc *intel_crtc,
-			       struct intel_crtc_state *crtc_state)
-{
-	struct drm_plane *plane = NULL;
-	struct intel_plane *intel_plane;
-	struct intel_plane_state *plane_state = NULL;
-	struct intel_crtc_scaler_state *scaler_state =
-		&crtc_state->scaler_state;
-	struct drm_atomic_state *drm_state = crtc_state->uapi.state;
-	struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state);
-	int num_scalers_need;
-	int i;
-
-	num_scalers_need = hweight32(scaler_state->scaler_users);
-
-	/*
-	 * High level flow:
-	 * - staged scaler requests are already in scaler_state->scaler_users
-	 * - check whether staged scaling requests can be supported
-	 * - add planes using scalers that aren't in current transaction
-	 * - assign scalers to requested users
-	 * - as part of plane commit, scalers will be committed
-	 *   (i.e., either attached or detached) to respective planes in hw
-	 * - as part of crtc_commit, scaler will be either attached or detached
-	 *   to crtc in hw
-	 */
-
-	/* fail if required scalers > available scalers */
-	if (num_scalers_need > intel_crtc->num_scalers){
-		drm_dbg_kms(&dev_priv->drm,
-			    "Too many scaling requests %d > %d\n",
-			    num_scalers_need, intel_crtc->num_scalers);
-		return -EINVAL;
-	}
-
-	/* walkthrough scaler_users bits and start assigning scalers */
-	for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
-		int *scaler_id;
-		const char *name;
-		int idx, ret;
-
-		/* skip if scaler not required */
-		if (!(scaler_state->scaler_users & (1 << i)))
-			continue;
-
-		if (i == SKL_CRTC_INDEX) {
-			name = "CRTC";
-			idx = intel_crtc->base.base.id;
-
-			/* panel fitter case: assign as a crtc scaler */
-			scaler_id = &scaler_state->scaler_id;
-		} else {
-			name = "PLANE";
-
-			/* plane scaler case: assign as a plane scaler */
-			/* find the plane that set the bit as scaler_user */
-			plane = drm_state->planes[i].ptr;
-
-			/*
-			 * to enable/disable hq mode, add planes that are using scaler
-			 * into this transaction
-			 */
-			if (!plane) {
-				struct drm_plane_state *state;
-
-				/*
-				 * GLK+ scalers don't have a HQ mode so it
-				 * isn't necessary to change between HQ and dyn mode
-				 * on those platforms.
-				 */
-				if (DISPLAY_VER(dev_priv) >= 10)
-					continue;
-
-				plane = drm_plane_from_index(&dev_priv->drm, i);
-				state = drm_atomic_get_plane_state(drm_state, plane);
-				if (IS_ERR(state)) {
-					drm_dbg_kms(&dev_priv->drm,
-						    "Failed to add [PLANE:%d] to drm_state\n",
-						    plane->base.id);
-					return PTR_ERR(state);
-				}
-			}
-
-			intel_plane = to_intel_plane(plane);
-			idx = plane->base.id;
-
-			/* plane on different crtc cannot be a scaler user of this crtc */
-			if (drm_WARN_ON(&dev_priv->drm,
-					intel_plane->pipe != intel_crtc->pipe))
-				continue;
-
-			plane_state = intel_atomic_get_new_plane_state(intel_state,
-								       intel_plane);
-			scaler_id = &plane_state->scaler_id;
-		}
-
-		ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need,
-						intel_crtc, name, idx,
-						plane_state, scaler_id);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
 struct drm_atomic_state *
 intel_atomic_state_alloc(struct drm_device *dev)
 {
@@ -599,6 +342,8 @@ void intel_atomic_state_clear(struct drm_atomic_state *s)
 	drm_atomic_state_default_clear(&state->base);
 	intel_atomic_clear_global_state(state);
 
+	/* state->internal not reset on purpose */
+
 	state->dpll_set = state->modeset = false;
 }
 

drivers/gpu/drm/i915/display/intel_atomic.h

@@ -52,8 +52,4 @@ struct intel_crtc_state *
 intel_atomic_get_crtc_state(struct drm_atomic_state *state,
 			    struct intel_crtc *crtc);
 
-int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
-			       struct intel_crtc *intel_crtc,
-			       struct intel_crtc_state *crtc_state);
-
 #endif /* __INTEL_ATOMIC_H__ */

drivers/gpu/drm/i915/display/intel_atomic_plane.c

@@ -36,6 +36,7 @@
 #include <drm/drm_fourcc.h>
 
 #include "i915_config.h"
+#include "i915_reg.h"
 #include "intel_atomic_plane.h"
 #include "intel_cdclk.h"
 #include "intel_display_rps.h"

drivers/gpu/drm/i915/display/intel_audio.c

@@ -1039,6 +1039,7 @@ static void glk_force_audio_cdclk(struct drm_i915_private *i915,
 		return;
 
 	state->acquire_ctx = &ctx;
+	to_intel_atomic_state(state)->internal = true;
 
 retry:
 	ret = glk_force_audio_cdclk_commit(to_intel_atomic_state(state), crtc,

drivers/gpu/drm/i915/display/intel_bios.h

@@ -247,7 +247,6 @@ bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv);
 bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin);
 bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port);
 bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
-bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port);
 bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
 bool intel_bios_get_dsc_params(struct intel_encoder *encoder,
 			       struct intel_crtc_state *crtc_state,
@@ -264,6 +263,7 @@ bool intel_bios_encoder_supports_dp(const struct intel_bios_encoder_data *devdat
 bool intel_bios_encoder_supports_edp(const struct intel_bios_encoder_data *devdata);
 bool intel_bios_encoder_supports_typec_usb(const struct intel_bios_encoder_data *devdata);
 bool intel_bios_encoder_supports_tbt(const struct intel_bios_encoder_data *devdata);
+bool intel_bios_encoder_supports_dp_dual_mode(const struct intel_bios_encoder_data *devdata);
 bool intel_bios_encoder_is_lspcon(const struct intel_bios_encoder_data *devdata);
 bool intel_bios_encoder_lane_reversal(const struct intel_bios_encoder_data *devdata);
 bool intel_bios_encoder_hpd_invert(const struct intel_bios_encoder_data *devdata);

drivers/gpu/drm/i915/display/intel_bw.c

@@ -150,6 +150,9 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
 {
 	int ret;
 
+	if (DISPLAY_VER(dev_priv) >= 14)
+		return 0;
+
 	/* bspec says to keep retrying for at least 1 ms */
 	ret = skl_pcode_request(&dev_priv->uncore, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
 				points_mask,

drivers/gpu/drm/i915/display/intel_cdclk.h

@@ -82,5 +82,6 @@ intel_atomic_get_cdclk_state(struct intel_atomic_state *state);
 	to_intel_cdclk_state(intel_atomic_get_new_global_obj_state(state, &to_i915(state->base.dev)->display.cdclk.obj))
 
 int intel_cdclk_init(struct drm_i915_private *dev_priv);
+void intel_cdclk_debugfs_register(struct drm_i915_private *i915);
 
 #endif /* __INTEL_CDCLK_H__ */

drivers/gpu/drm/i915/display/intel_connector.c

@@ -176,15 +176,15 @@ enum pipe intel_connector_get_pipe(struct intel_connector *connector)
 /**
  * intel_connector_update_modes - update connector from edid
  * @connector: DRM connector device to use
- * @edid: previously read EDID information
+ * @drm_edid: previously read EDID information
  */
 int intel_connector_update_modes(struct drm_connector *connector,
-				struct edid *edid)
+				 const struct drm_edid *drm_edid)
 {
 	int ret;
 
-	drm_connector_update_edid_property(connector, edid);
-	ret = drm_add_edid_modes(connector, edid);
+	drm_edid_connector_update(connector, drm_edid);
+	ret = drm_edid_connector_add_modes(connector);
 
 	return ret;
 }
@@ -199,15 +199,15 @@ int intel_connector_update_modes(struct drm_connector *connector,
 int intel_ddc_get_modes(struct drm_connector *connector,
 			struct i2c_adapter *adapter)
 {
-	struct edid *edid;
+	const struct drm_edid *drm_edid;
 	int ret;
 
-	edid = drm_get_edid(connector, adapter);
-	if (!edid)
+	drm_edid = drm_edid_read_ddc(connector, adapter);
+	if (!drm_edid)
 		return 0;
 
-	ret = intel_connector_update_modes(connector, edid);
-	kfree(edid);
+	ret = intel_connector_update_modes(connector, drm_edid);
+	drm_edid_free(drm_edid);
 
 	return ret;
 }

drivers/gpu/drm/i915/display/intel_connector.h

@@ -9,7 +9,7 @@
 #include <linux/types.h>
 
 struct drm_connector;
-struct edid;
+struct drm_edid;
 struct i2c_adapter;
 struct intel_connector;
 struct intel_encoder;
@@ -25,7 +25,7 @@ void intel_connector_attach_encoder(struct intel_connector *connector,
 bool intel_connector_get_hw_state(struct intel_connector *connector);
 enum pipe intel_connector_get_pipe(struct intel_connector *connector);
 int intel_connector_update_modes(struct drm_connector *connector,
-				 struct edid *edid);
+				 const struct drm_edid *drm_edid);
 int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
 void intel_attach_force_audio_property(struct drm_connector *connector);
 void intel_attach_broadcast_rgb_property(struct drm_connector *connector);

drivers/gpu/drm/i915/display/intel_crt.c

@@ -48,6 +48,8 @@
 #include "intel_fifo_underrun.h"
 #include "intel_gmbus.h"
 #include "intel_hotplug.h"
+#include "intel_hotplug_irq.h"
+#include "intel_load_detect.h"
 #include "intel_pch_display.h"
 #include "intel_pch_refclk.h"
 
@@ -394,6 +396,7 @@ static int intel_crt_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return -EINVAL;
 
+	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
 	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 
 	return 0;
@@ -606,37 +609,38 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	return ret;
 }
 
-static struct edid *intel_crt_get_edid(struct drm_connector *connector,
-				struct i2c_adapter *i2c)
+static const struct drm_edid *intel_crt_get_edid(struct drm_connector *connector,
+						 struct i2c_adapter *i2c)
 {
-	struct edid *edid;
+	const struct drm_edid *drm_edid;
 
-	edid = drm_get_edid(connector, i2c);
+	drm_edid = drm_edid_read_ddc(connector, i2c);
 
-	if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
+	if (!drm_edid && !intel_gmbus_is_forced_bit(i2c)) {
 		drm_dbg_kms(connector->dev,
 			    "CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
 		intel_gmbus_force_bit(i2c, true);
-		edid = drm_get_edid(connector, i2c);
+		drm_edid = drm_edid_read_ddc(connector, i2c);
 		intel_gmbus_force_bit(i2c, false);
 	}
 
-	return edid;
+	return drm_edid;
 }
 
 /* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
 static int intel_crt_ddc_get_modes(struct drm_connector *connector,
 				struct i2c_adapter *adapter)
 {
-	struct edid *edid;
+	const struct drm_edid *drm_edid;
 	int ret;
 
-	edid = intel_crt_get_edid(connector, adapter);
-	if (!edid)
+	drm_edid = intel_crt_get_edid(connector, adapter);
+	if (!drm_edid)
 		return 0;
 
-	ret = intel_connector_update_modes(connector, edid);
-	kfree(edid);
+	ret = intel_connector_update_modes(connector, drm_edid);
+
+	drm_edid_free(drm_edid);
 
 	return ret;
 }
@@ -645,14 +649,15 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
 	struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 	struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev);
-	struct edid *edid;
+	const struct drm_edid *drm_edid;
 	struct i2c_adapter *i2c;
 	bool ret = false;
 
 	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->display.vbt.crt_ddc_pin);
-	edid = intel_crt_get_edid(connector, i2c);
+	drm_edid = intel_crt_get_edid(connector, i2c);
 
-	if (edid) {
+	if (drm_edid) {
+		const struct edid *edid = drm_edid_raw(drm_edid);
 		bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
 
 		/*
@@ -673,7 +678,7 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 			    "CRT not detected via DDC:0x50 [no valid EDID found]\n");
 	}
 
-	kfree(edid);
+	drm_edid_free(drm_edid);
 
 	return ret;
 }
@@ -821,9 +826,9 @@ intel_crt_detect(struct drm_connector *connector,
 	struct drm_i915_private *dev_priv = to_i915(connector->dev);
 	struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 	struct intel_encoder *intel_encoder = &crt->base;
+	struct drm_atomic_state *state;
 	intel_wakeref_t wakeref;
-	int status, ret;
-	struct intel_load_detect_pipe tmp;
+	int status;
 
 	drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s] force=%d\n",
 		    connector->base.id, connector->name,
@@ -881,8 +886,12 @@ intel_crt_detect(struct drm_connector *connector,
 	}
 
 	/* for pre-945g platforms use load detect */
-	ret = intel_get_load_detect_pipe(connector, &tmp, ctx);
-	if (ret > 0) {
+	state = intel_load_detect_get_pipe(connector, ctx);
+	if (IS_ERR(state)) {
+		status = PTR_ERR(state);
+	} else if (!state) {
+		status = connector_status_unknown;
+	} else {
 		if (intel_crt_detect_ddc(connector))
 			status = connector_status_connected;
 		else if (DISPLAY_VER(dev_priv) < 4)
@@ -892,11 +901,7 @@ intel_crt_detect(struct drm_connector *connector,
 			status = connector_status_disconnected;
 		else
 			status = connector_status_unknown;
-		intel_release_load_detect_pipe(connector, &tmp, ctx);
-	} else if (ret == 0) {
-		status = connector_status_unknown;
-	} else {
-		status = ret;
+		intel_load_detect_release_pipe(connector, state, ctx);
 	}
 
 out:

drivers/gpu/drm/i915/display/intel_crtc.c

@@ -11,7 +11,6 @@
 #include <drm/drm_plane.h>
 #include <drm/drm_vblank_work.h>
 
-#include "i915_irq.h"
 #include "i915_vgpu.h"
 #include "i9xx_plane.h"
 #include "icl_dsi.h"
@@ -21,6 +20,7 @@
 #include "intel_crtc.h"
 #include "intel_cursor.h"
 #include "intel_display_debugfs.h"
+#include "intel_display_irq.h"
 #include "intel_display_trace.h"
 #include "intel_display_types.h"
 #include "intel_drrs.h"
@@ -35,7 +35,11 @@
 
 static void assert_vblank_disabled(struct drm_crtc *crtc)
 {
-	if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
+	struct drm_i915_private *i915 = to_i915(crtc->dev);
+
+	if (I915_STATE_WARN(i915, drm_crtc_vblank_get(crtc) == 0,
+			    "[CRTC:%d:%s] vblank assertion failure (expected off, current on)\n",
+			    crtc->base.id, crtc->name))
 		drm_crtc_vblank_put(crtc);
 }
 
@@ -302,7 +306,7 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
 		return PTR_ERR(crtc);
 
 	crtc->pipe = pipe;
-	crtc->num_scalers = RUNTIME_INFO(dev_priv)->num_scalers[pipe];
+	crtc->num_scalers = DISPLAY_RUNTIME_INFO(dev_priv)->num_scalers[pipe];
 
 	if (DISPLAY_VER(dev_priv) >= 9)
 		primary = skl_universal_plane_create(dev_priv, pipe,
@@ -510,6 +514,13 @@ void intel_pipe_update_start(struct intel_crtc_state *new_crtc_state)
 						      VBLANK_EVASION_TIME_US);
 	max = vblank_start - 1;
 
+	/*
+	 * M/N is double buffered on the transcoder's undelayed vblank,
+	 * so with seamless M/N we must evade both vblanks.
+	 */
+	if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
+		min -= adjusted_mode->crtc_vblank_start - adjusted_mode->crtc_vdisplay;
+
 	if (min <= 0 || max <= 0)
 		goto irq_disable;
 
@@ -692,7 +703,8 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
 	 * FIXME Should be synchronized with the start of vblank somehow...
 	 */
 	if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
-		intel_crtc_update_active_timings(new_crtc_state);
+		intel_crtc_update_active_timings(new_crtc_state,
+						 new_crtc_state->vrr.enable);
 
 	local_irq_enable();
 

drivers/gpu/drm/i915/display/intel_crtc.h

@@ -16,6 +16,16 @@ struct intel_atomic_state;
 struct intel_crtc;
 struct intel_crtc_state;
 
+/*
+ * FIXME: We should instead only take spinlocks once for the entire update
+ * instead of once per mmio.
+ */
+#if IS_ENABLED(CONFIG_PROVE_LOCKING)
+#define VBLANK_EVASION_TIME_US 250
+#else
+#define VBLANK_EVASION_TIME_US 100
+#endif
+
 int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
 			     int usecs);
 u32 intel_crtc_max_vblank_count(const struct intel_crtc_state *crtc_state);

drivers/gpu/drm/i915/display/intel_crtc_state_dump.c

@@ -158,6 +158,45 @@ static void intel_dump_plane_state(const struct intel_plane_state *plane_state)
 			    DRM_RECT_ARG(&plane_state->uapi.dst));
 }
 
+static void
+ilk_dump_csc(struct drm_i915_private *i915, const char *name,
+	     const struct intel_csc_matrix *csc)
+{
+	int i;
+
+	drm_dbg_kms(&i915->drm,
+		    "%s: pre offsets: 0x%04x 0x%04x 0x%04x\n", name,
+		    csc->preoff[0], csc->preoff[1], csc->preoff[2]);
+
+	for (i = 0; i < 3; i++)
+		drm_dbg_kms(&i915->drm,
+			    "%s: coefficients: 0x%04x 0x%04x 0x%04x\n", name,
+			    csc->coeff[3 * i + 0],
+			    csc->coeff[3 * i + 1],
+			    csc->coeff[3 * i + 2]);
+
+	if (DISPLAY_VER(i915) < 7)
+		return;
+
+	drm_dbg_kms(&i915->drm,
+		    "%s: post offsets: 0x%04x 0x%04x 0x%04x\n", name,
+		    csc->postoff[0], csc->postoff[1], csc->postoff[2]);
+}
+
+static void
+vlv_dump_csc(struct drm_i915_private *i915, const char *name,
+	     const struct intel_csc_matrix *csc)
+{
+	int i;
+
+	for (i = 0; i < 3; i++)
+		drm_dbg_kms(&i915->drm,
+			    "%s: coefficients: 0x%04x 0x%04x 0x%04x\n", name,
+			    csc->coeff[3 * i + 0],
+			    csc->coeff[3 * i + 1],
+			    csc->coeff[3 * i + 2]);
+}
+
 void intel_crtc_state_dump(const struct intel_crtc_state *pipe_config,
 			   struct intel_atomic_state *state,
 			   const char *context)
@@ -178,10 +217,11 @@ void intel_crtc_state_dump(const struct intel_crtc_state *pipe_config,
 
 	snprintf_output_types(buf, sizeof(buf), pipe_config->output_types);
 	drm_dbg_kms(&i915->drm,
-		    "active: %s, output_types: %s (0x%x), output format: %s\n",
+		    "active: %s, output_types: %s (0x%x), output format: %s, sink format: %s\n",
 		    str_yes_no(pipe_config->hw.active),
 		    buf, pipe_config->output_types,
-		    intel_output_format_name(pipe_config->output_format));
+		    intel_output_format_name(pipe_config->output_format),
+		    intel_output_format_name(pipe_config->sink_format));
 
 	drm_dbg_kms(&i915->drm,
 		    "cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
@@ -325,6 +365,16 @@ void intel_crtc_state_dump(const struct intel_crtc_state *pipe_config,
 		    pipe_config->post_csc_lut ?
 		    drm_color_lut_size(pipe_config->post_csc_lut) : 0);
 
+	if (DISPLAY_VER(i915) >= 11)
+		ilk_dump_csc(i915, "output csc", &pipe_config->output_csc);
+
+	if (!HAS_GMCH(i915))
+		ilk_dump_csc(i915, "pipe csc", &pipe_config->csc);
+	else if (IS_CHERRYVIEW(i915))
+		vlv_dump_csc(i915, "cgm csc", &pipe_config->csc);
+	else if (IS_VALLEYVIEW(i915))
+		vlv_dump_csc(i915, "wgc csc", &pipe_config->csc);
+
 dump_planes:
 	if (!state)
 		return;

drivers/gpu/drm/i915/display/intel_cursor.c

@@ -36,7 +36,7 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
 	const struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	u32 base;
 
-	if (INTEL_INFO(dev_priv)->display.cursor_needs_physical)
+	if (DISPLAY_INFO(dev_priv)->cursor_needs_physical)
 		base = sg_dma_address(obj->mm.pages->sgl);
 	else
 		base = intel_plane_ggtt_offset(plane_state);
@@ -814,7 +814,7 @@ intel_cursor_plane_create(struct drm_i915_private *dev_priv,
 						   DRM_MODE_ROTATE_0 |
 						   DRM_MODE_ROTATE_180);
 
-	zpos = RUNTIME_INFO(dev_priv)->num_sprites[pipe] + 1;
+	zpos = DISPLAY_RUNTIME_INFO(dev_priv)->num_sprites[pipe] + 1;
 	drm_plane_create_zpos_immutable_property(&cursor->base, zpos);
 
 	if (DISPLAY_VER(dev_priv) >= 12)

drivers/gpu/drm/i915/display/intel_cx0_phy.h

+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2023 Intel Corporation
+ */
+
+#ifndef __INTEL_CX0_PHY_H__
+#define __INTEL_CX0_PHY_H__
+
+#include <linux/types.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+#include "i915_drv.h"
+#include "intel_display_types.h"
+
+struct drm_i915_private;
+struct intel_encoder;
+struct intel_crtc_state;
+enum icl_port_dpll_id;
+enum phy;
+
+bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy);
+void intel_mtl_pll_enable(struct intel_encoder *encoder,
+			  const struct intel_crtc_state *crtc_state);
+void intel_mtl_pll_disable(struct intel_encoder *encoder);
+enum icl_port_dpll_id
+intel_mtl_port_pll_type(struct intel_encoder *encoder,
+			const struct intel_crtc_state *crtc_state);
+void intel_c10pll_readout_hw_state(struct intel_encoder *encoder, struct intel_c10pll_state *pll_state);
+int intel_cx0pll_calc_state(struct intel_crtc_state *crtc_state, struct intel_encoder *encoder);
+void intel_c10pll_dump_hw_state(struct drm_i915_private *dev_priv,
+				const struct intel_c10pll_state *hw_state);
+int intel_c10pll_calc_port_clock(struct intel_encoder *encoder,
+				 const struct intel_c10pll_state *pll_state);
+void intel_c10pll_state_verify(struct intel_atomic_state *state,
+			       struct intel_crtc_state *new_crtc_state);
+void intel_c20pll_readout_hw_state(struct intel_encoder *encoder,
+				   struct intel_c20pll_state *pll_state);
+void intel_c20pll_dump_hw_state(struct drm_i915_private *i915,
+				const struct intel_c20pll_state *hw_state);
+int intel_c20pll_calc_port_clock(struct intel_encoder *encoder,
+				 const struct intel_c20pll_state *pll_state);
+void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
+				     const struct intel_crtc_state *crtc_state);
+int intel_cx0_phy_check_hdmi_link_rate(struct intel_hdmi *hdmi, int clock);
+void intel_cx0_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
+				       const struct intel_crtc_state *crtc_state,
+				       u32 level);
+int intel_mtl_tbt_calc_port_clock(struct intel_encoder *encoder);
+#endif /* __INTEL_CX0_PHY_H__ */

drivers/gpu/drm/i915/display/intel_display_core.h

@@ -30,7 +30,7 @@ struct drm_i915_private;
 struct drm_property;
 struct drm_property_blob;
 struct i915_audio_component;
-struct i915_hdcp_comp_master;
+struct i915_hdcp_arbiter;
 struct intel_atomic_state;
 struct intel_audio_funcs;
 struct intel_bios_encoder_data;
@@ -395,7 +395,7 @@ struct intel_display {
 	} gmbus;
 
 	struct {
-		struct i915_hdcp_master *master;
+		struct i915_hdcp_arbiter *arbiter;
 		bool comp_added;
 
 		/*
@@ -404,8 +404,8 @@ struct intel_display {
 		 * this is only populated post Meteorlake
 		 */
 		struct intel_hdcp_gsc_message *hdcp_message;
-		/* Mutex to protect the above hdcp component related values. */
-		struct mutex comp_mutex;
+		/* Mutex to protect the above hdcp related values. */
+		struct mutex hdcp_mutex;
 	} hdcp;
 
 	struct {

drivers/gpu/drm/i915/display/intel_display_debugfs.c

@@ -12,6 +12,7 @@
 #include "i915_debugfs.h"
 #include "i915_irq.h"
 #include "i915_reg.h"
+#include "intel_crtc.h"
 #include "intel_de.h"
 #include "intel_crtc_state_dump.h"
 #include "intel_display_debugfs.h"
@@ -30,7 +31,6 @@
 #include "intel_panel.h"
 #include "intel_psr.h"
 #include "intel_psr_regs.h"
-#include "intel_sprite.h"
 #include "intel_wm.h"
 
 static inline struct drm_i915_private *node_to_i915(struct drm_info_node *node)
@@ -237,28 +237,26 @@ static void intel_dp_info(struct seq_file *m,
 
 	seq_printf(m, "\tDPCD rev: %x\n", intel_dp->dpcd[DP_DPCD_REV]);
 	seq_printf(m, "\taudio support: %s\n",
-		   str_yes_no(intel_dp->has_audio));
+		   str_yes_no(intel_connector->base.display_info.has_audio));
 
 	drm_dp_downstream_debug(m, intel_dp->dpcd, intel_dp->downstream_ports,
 				edid ? edid->data : NULL, &intel_dp->aux);
 }
 
 static void intel_dp_mst_info(struct seq_file *m,
-			      struct intel_connector *intel_connector)
+			      struct intel_connector *connector)
 {
-	bool has_audio = intel_connector->port->has_audio;
+	bool has_audio = connector->base.display_info.has_audio;
 
 	seq_printf(m, "\taudio support: %s\n", str_yes_no(has_audio));
 }
 
 static void intel_hdmi_info(struct seq_file *m,
-			    struct intel_connector *intel_connector)
+			    struct intel_connector *connector)
 {
-	struct intel_encoder *intel_encoder = intel_attached_encoder(intel_connector);
-	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(intel_encoder);
+	bool has_audio = connector->base.display_info.has_audio;
 
-	seq_printf(m, "\taudio support: %s\n",
-		   str_yes_no(intel_hdmi->has_audio));
+	seq_printf(m, "\taudio support: %s\n", str_yes_no(has_audio));
 }
 
 static void intel_connector_info(struct seq_file *m,
@@ -1094,6 +1092,7 @@ void intel_display_debugfs_register(struct drm_i915_private *i915)
 				 ARRAY_SIZE(intel_display_debugfs_list),
 				 minor->debugfs_root, minor);
 
+	intel_cdclk_debugfs_register(i915);
 	intel_dmc_debugfs_register(i915);
 	intel_fbc_debugfs_register(i915);
 	intel_hpd_debugfs_register(i915);