Merge tag 'devicetree-fixes-for-4.17' into dt/next to pick-up fixes

Documentation/devicetree/bindings/display/panel/panel-common.txt

@@ -38,7 +38,7 @@ Display Timings
   require specific display timings. The panel-timing subnode expresses those
   timings as specified in the timing subnode section of the display timing
   bindings defined in
-  Documentation/devicetree/bindings/display/display-timing.txt.
+  Documentation/devicetree/bindings/display/panel/display-timing.txt.
 
 
 Connectivity

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -26,6 +26,7 @@ Required Properties:
 		- "renesas,dmac-r8a7794" (R-Car E2)
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
+		- "renesas,dmac-r8a77965" (R-Car M3-N)
 		- "renesas,dmac-r8a77970" (R-Car V3M)
 		- "renesas,dmac-r8a77980" (R-Car V3H)
 

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -18,6 +18,7 @@ Required properties:
 
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
       - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
       - "renesas,etheravb-r8a77995" for the R8A77995 SoC.

Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt

@@ -56,9 +56,9 @@ pins it needs, and how they should be configured, with regard to muxer
 configuration, drive strength and pullups. If one of these options is
 not set, its actual value will be unspecified.
 
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
 
 Required sub-node properties:
   - pins

Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt

@@ -21,7 +21,7 @@ Required properties:
 - interrupts : identifier to the device interrupt
 - clocks : a list of phandle + clock-specifier pairs, one for each
 	   entry in clock names.
-- clocks-names :
+- clock-names :
    * "xtal" for external xtal clock identifier
    * "pclk" for the bus core clock, either the clk81 clock or the gate clock
    * "baud" for the source of the baudrate generator, can be either the xtal

Documentation/devicetree/bindings/serial/mvebu-uart.txt

@@ -24,7 +24,7 @@ Required properties:
     - Must contain two elements for the extended variant of the IP
       (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
       respectively the UART TX interrupt and the UART RX interrupt. A
-      corresponding interrupts-names property must be defined.
+      corresponding interrupt-names property must be defined.
     - For backward compatibility reasons, a single element interrupts
       property is also supported for the standard variant of the IP,
       containing only the UART sum interrupt. This form is deprecated

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -41,6 +41,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
+    - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
     - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
     - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -183,6 +183,7 @@ karo	Ka-Ro electronics GmbH
 keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
 khadas	Khadas
+kiebackpeter    Kieback & Peter GmbH
 kinetic Kinetic Technologies
 kingnovel	Kingnovel Technology Co., Ltd.
 koe	Kaohsiung Opto-Electronics Inc.

Documentation/devicetree/overlay-notes.txt

@@ -98,6 +98,14 @@ Finally, if you need to remove all overlays in one-go, just call
 of_overlay_remove_all() which will remove every single one in the correct
 order.
 
+In addition, there is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+Note that a notifier callback is not supposed to store pointers to a device
+tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
+respective node it received.
+
 Overlay DTS Format
 ------------------
 

drivers/of/overlay.c

@@ -102,12 +102,28 @@ static DEFINE_IDR(ovcs_idr);
 
 static BLOCKING_NOTIFIER_HEAD(overlay_notify_chain);
 
+/**
+ * of_overlay_notifier_register() - Register notifier for overlay operations
+ * @nb:		Notifier block to register
+ *
+ * Register for notification on overlay operations on device tree nodes. The
+ * reported actions definied by @of_reconfig_change. The notifier callback
+ * furthermore receives a pointer to the affected device tree node.
+ *
+ * Note that a notifier callback is not supposed to store pointers to a device
+ * tree node or its content beyond @OF_OVERLAY_POST_REMOVE corresponding to the
+ * respective node it received.
+ */
 int of_overlay_notifier_register(struct notifier_block *nb)
 {
 	return blocking_notifier_chain_register(&overlay_notify_chain, nb);
 }
 EXPORT_SYMBOL_GPL(of_overlay_notifier_register);
 
+/**
+ * of_overlay_notifier_register() - Unregister notifier for overlay operations
+ * @nb:		Notifier block to unregister
+ */
 int of_overlay_notifier_unregister(struct notifier_block *nb)
 {
 	return blocking_notifier_chain_unregister(&overlay_notify_chain, nb);
@@ -671,17 +687,13 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs)
 		of_node_put(ovcs->fragments[i].overlay);
 	}
 	kfree(ovcs->fragments);
-
 	/*
-	 * TODO
-	 *
-	 * would like to: kfree(ovcs->overlay_tree);
-	 * but can not since drivers may have pointers into this data
-	 *
-	 * would like to: kfree(ovcs->fdt);
-	 * but can not since drivers may have pointers into this data
+	 * There should be no live pointers into ovcs->overlay_tree and
+	 * ovcs->fdt due to the policy that overlay notifiers are not allowed
+	 * to retain pointers into the overlay devicetree.
 	 */
-
+	kfree(ovcs->overlay_tree);
+	kfree(ovcs->fdt);
 	kfree(ovcs);
 }
 

scripts/dtc/checks.c

@@ -787,10 +787,9 @@ static void check_pci_bridge(struct check *c, struct dt_info *dti, struct node *
 		FAIL(c, dti, node, "incorrect #size-cells for PCI bridge");
 
 	prop = get_property(node, "bus-range");
-	if (!prop) {
-		FAIL(c, dti, node, "missing bus-range for PCI bridge");
+	if (!prop)
 		return;
-	}
+
 	if (prop->val.len != (sizeof(cell_t) * 2)) {
 		FAIL_PROP(c, dti, node, prop, "value must be 2 cells");
 		return;