Commit 9663398a authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "This is our first set of fixes from arm-soc for 3.11.
   - A handful of build and warning fixes from Arnd
   - A collection of OMAP fixes
   - defconfig updates to make the default configs more useful for real
     use (and testing) out of the box on hardware

  And a couple of other small fixes.  Some of these have been recently
  applied but it's normally how we deal with fixes, with less bake time
  in -next needed"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  arm: multi_v7_defconfig: Tweaks for omap and sunxi
  arm: multi_v7_defconfig: add i.MX options and NFS root
  ARM: omap2: add select of TI_PRIV_EDMA
  ARM: exynos: select PM_GENERIC_DOMAINS only when used
  ARM: ixp4xx: avoid circular header dependency
  ARM: OMAP: omap_common_late_init may be unused
  ARM: sti: move DEBUG_STI_UART into alphabetical order
  ARM: OMAP: build mach-omap code only if needed
  ARM: zynq: use DT_MACHINE_START
  ARM: omap5: omap5 has SCU and TWD
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ...
parents bfd65dd9 d4e1c7ef
......@@ -510,6 +510,16 @@ choice
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
config DEBUG_STI_UART
depends on ARCH_STI
bool "Use StiH415/416 ASC for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on StiH415/416 based platforms like B2000, B2020.
It support UART2 and SBC_UART1.
If unsure, say N.
config DEBUG_U300_UART
bool "Kernel low-level debugging messages via U300 UART0"
depends on ARCH_U300
......@@ -564,16 +574,6 @@ choice
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
config DEBUG_STI_UART
depends on ARCH_STI
bool "Use StiH415/416 ASC for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on StiH415/416 based platforms like B2000, B2020.
It support UART2 and SBC_UART1.
If unsure, say N.
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
......
......@@ -828,6 +828,7 @@ vbus_reg: regulator@3 {
regulator-name = "vdd_vbus_wup1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 24 0>; /* PD0 */
};
};
......
......@@ -410,6 +410,7 @@ vbus_reg: regulator@2 {
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&gpio 170 0>; /* PV2 */
};
};
......
......@@ -586,6 +586,7 @@ vbus1_reg: regulator@2 {
regulator-name = "vbus1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
};
......@@ -595,6 +596,7 @@ vbus3_reg: regulator@3 {
regulator-name = "vbus3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
};
};
......
CONFIG_EXPERIMENTAL=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_ARCH_SIRF=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_BCM=y
CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_IMX51_DT=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
CONFIG_SOC_VF610=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
CONFIG_SOC_AM43XX=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SOCFPGA=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_WM8850=y
# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
CONFIG_ARCH_ZYNQ=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_PLAT_SPEAR=y
CONFIG_ARCH_SPEAR13XX=y
CONFIG_MACH_SPEAR1310=y
CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_TEGRA_PCI=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_ARCH_U8500=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_UX500_DT=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
CONFIG_ARCH_VIRT=y
CONFIG_ARCH_WM8850=y
CONFIG_ARCH_ZYNQ=y
CONFIG_SMP=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_MDIO_SUN4I=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_SIRFSOC=y
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_SI=y
CONFIG_I2C=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_SPI_SIRF=y
CONFIG_GPIO_PL061=y
CONFIG_FB=y
CONFIG_SPI_TEGRA114=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_TWL4030=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_DRM=y
CONFIG_TEGRA_HOST1X=y
CONFIG_DRM_TEGRA=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FB_SIMPLE=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_AB8500_USB=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_USB2=y
CONFIG_OMAP_USB3=y
CONFIG_SAMSUNG_USB2PHY=y
CONFIG_SAMSUNG_USB3PHY=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
CONFIG_MMC_SDHCI_SPEAR=y
CONFIG_MMC_WMT=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_HIGHBANK_MC=y
CONFIG_EDAC_HIGHBANK_L2=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_VT8500=y
CONFIG_PWM=y
CONFIG_PWM_VT8500=y
CONFIG_RTC_DRV_TEGRA=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
CONFIG_SIRF_DMA=y
CONFIG_DW_DMAC=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_STE_DMA40=y
CONFIG_SIRF_DMA=y
CONFIG_TI_EDMA=y
CONFIG_PL330_DMA=y
CONFIG_IMX_SDMA=y
CONFIG_IMX_DMA=y
CONFIG_MXS_DMA=y
CONFIG_DMA_OMAP=y
CONFIG_PWM=y
CONFIG_PWM_VT8500=y
CONFIG_EXT4_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
......@@ -22,6 +22,10 @@ CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MULTI_V6=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_AM33XX=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
......@@ -34,6 +38,8 @@ CONFIG_NR_CPUS=2
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
......@@ -152,6 +158,13 @@ CONFIG_W1=y
CONFIG_POWER_SUPPLY=y
CONFIG_SENSORS_LM75=m
CONFIG_WATCHDOG=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
......@@ -238,7 +251,13 @@ CONFIG_RTC_DRV_TWL92330=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
......
CONFIG_EXPERIMENTAL=y
CONFIG_HIGHMEM=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
......@@ -9,10 +11,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_MACH_UX500_DT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PREEMPT=y
......@@ -20,6 +19,7 @@ CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
......@@ -36,7 +36,6 @@ CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
......@@ -60,35 +59,39 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_AB8500_BM is not set
# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y
CONFIG_REGULATOR_AB8500=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_UX500=y
CONFIG_SND_SOC_UX500_MACH_MOP500=y
CONFIG_USB=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y
CONFIG_USB_PHY=y
CONFIG_AB8500_USB=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
......@@ -108,7 +111,6 @@ CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
......@@ -122,3 +124,7 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_DEV_UX500=y
CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
......@@ -23,10 +23,21 @@ static inline unsigned long scu_a9_get_base(void)
return pa;
}
#ifdef CONFIG_HAVE_ARM_SCU
unsigned int scu_get_core_count(void __iomem *);
int scu_power_mode(void __iomem *, unsigned int);
#else
static inline unsigned int scu_get_core_count(void __iomem *scu_base)
{
return 0;
}
static inline int scu_power_mode(void __iomem *scu_base, unsigned int mode)
{
return -EINVAL;
}
#endif
#ifdef CONFIG_SMP
#if defined(CONFIG_SMP) && defined(CONFIG_HAVE_ARM_SCU)
void scu_enable(void __iomem *scu_base);
#else
static inline void scu_enable(void __iomem *scu_base) {}
......
......@@ -38,7 +38,7 @@ config CPU_EXYNOS4210
depends on ARCH_EXYNOS4
select ARM_CPU_SUSPEND if PM
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
......
......@@ -28,6 +28,7 @@
#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
......
......@@ -3,7 +3,7 @@
*
*/
#include <mach/hardware.h>
#include <mach/ixp4xx-regs.h>
/*
* We use IXP425 General purpose timer for our timer needs, it runs at
......
......@@ -27,6 +27,8 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
static struct resource omixp_flash_resources[] = {
{
.flags = IORESOURCE_MEM,
......
config ARCH_OMAP
bool
config ARCH_OMAP2PLUS
bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
select ARCH_HAS_CPUFREQ
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select HAVE_CLK
select OMAP_DM_TIMER
select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SOC_BUS
select SPARSE_IRQ
select TI_PRIV_EDMA
select USE_OF
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
if ARCH_OMAP2PLUS
menu "TI OMAP2/3/4 Specific Features"
config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
default y
select AEABI
select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select PM_RUNTIME
select REGULATOR
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select VFP
help
Compile a kernel suitable for booting most boards
config SOC_HAS_OMAP2_SDRC
bool "OMAP2 SDRAM Controller support"
config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter"
depends on SOC_OMAP5
default y
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_OMAP2PLUS
depends on ARCH_MULTI_V6
default y
select ARCH_OMAP2PLUS
select CPU_V6
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
......@@ -65,9 +12,8 @@ config ARCH_OMAP2
config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_OMAP2PLUS
depends on ARCH_MULTI_V7
default y
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select CPU_V7
......@@ -81,9 +27,8 @@ config ARCH_OMAP3
config ARCH_OMAP4
bool "TI OMAP4"
default y
depends on ARCH_OMAP2PLUS
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND if PM
......@@ -108,12 +53,87 @@ config ARCH_OMAP4
config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if LOCAL_TIMERS
select HAVE_SMP
select COMMON_CLK
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181
config SOC_AM33XX
bool "AM33XX support"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
select COMMON_CLK
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
select CPU_V7
select ARCH_OMAP2PLUS
select MULTI_IRQ_HANDLER
select ARM_GIC
select COMMON_CLK
select MACH_OMAP_GENERIC
config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
select ARCH_HAS_CPUFREQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select HAVE_CLK
select OMAP_DM_TIMER
select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SOC_BUS
select SPARSE_IRQ
select TI_PRIV_EDMA
select USE_OF
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
if ARCH_OMAP2PLUS
menu "TI OMAP2/3/4 Specific Features"
config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
default y
select AEABI
select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
select PM_RUNTIME
select REGULATOR
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select VFP
help
Compile a kernel suitable for booting most boards
config SOC_HAS_OMAP2_SDRC
bool "OMAP2 SDRAM Controller support"
config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter"
depends on SOC_OMAP5
default y
comment "OMAP Core Type"
depends on ARCH_OMAP2
......@@ -142,23 +162,6 @@ config SOC_TI81XX
depends on ARCH_OMAP3
default y
config SOC_AM33XX
bool "AM33XX support"
depends on ARCH_MULTI_V7
default y
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
select COMMON_CLK
config SOC_AM43XX
bool "TI AM43x"
select CPU_V7
select MULTI_IRQ_HANDLER
select ARM_GIC
select COMMON_CLK
select MACH_OMAP_GENERIC
config OMAP_PACKAGE_ZAF
bool
......
......@@ -95,10 +95,6 @@ obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o += -DDEBUG
endif
endif
ifeq ($(CONFIG_CPU_IDLE),y)
......
......@@ -553,6 +553,37 @@ static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* Display Sub System */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* TFP410 PanelBus DVI Transmitte (GPIO_170) */
OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
......
......@@ -61,7 +61,7 @@ static struct omap_dss_board_info rx51_dss_board_info = {
static int __init rx51_video_init(void)
{
if (!machine_is_nokia_rx51())
if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return 0;
if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
......
......@@ -15,7 +15,6 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
......@@ -66,7 +65,7 @@ static int __init omap3_l3_init(void)
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
return PTR_RET(pdev);
}
omap_postcore_initcall(omap3_l3_init);
......@@ -100,7 +99,7 @@ static int __init omap4_l3_init(void)
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
return PTR_RET(pdev);
}
omap_postcore_initcall(omap4_l3_init);
......
......@@ -83,10 +83,7 @@ static int __init omap_init_vrfb(void)
pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
res, num_res, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
else
return 0;
return PTR_RET(pdev);
}
omap_arch_initcall(omap_init_vrfb);
......
......@@ -1734,7 +1734,7 @@ static int __init omap_gpmc_init(void)
pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
return PTR_RET(pdev);
}
omap_postcore_initcall(omap_gpmc_init);
......
......@@ -394,7 +394,7 @@ static void __init omap_hwmod_init_postsetup(void)
omap_pm_if_early_init();
}
static void __init omap_common_late_init(void)
static void __init __maybe_unused omap_common_late_init(void)
{
omap_mux_late_init();
omap2_common_pm_late_init();
......
......@@ -54,10 +54,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[])
WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n",
dev_name);
if (IS_ERR(omap_pmu_dev))
return PTR_ERR(omap_pmu_dev);
return 0;
return PTR_RET(omap_pmu_dev);
}
static int __init omap_init_pmu(void)
......
......@@ -34,6 +34,8 @@ ppa_zero_params:
ppa_por_params:
.word 1, 0
#ifdef CONFIG_ARCH_OMAP4
/*
* =============================
* == CPU suspend finisher ==
......@@ -326,7 +328,9 @@ skip_l2en:
b cpu_resume @ Jump to generic resume
ENDPROC(omap4_cpu_resume)
#endif
#endif /* CONFIG_ARCH_OMAP4 */
#endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */
#ifndef CONFIG_OMAP4_ERRATA_I688
ENTRY(omap_bus_sync)
......
......@@ -220,7 +220,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
int posted)
{
char name[10]; /* 10 = sizeof("gptXX_Xck0") */
const char *oh_name;
const char *oh_name = NULL;
struct device_node *np;
struct omap_hwmod *oh;
struct resource irq, mem;
......
......@@ -287,14 +287,14 @@ static struct gpio_em_config gio3_config = {
static struct resource gio3_resources[] = {
[0] = {
.name = "GIO_096",
.start = 0xe0050100,
.end = 0xe005012b,
.start = 0xe0050180,
.end = 0xe00501ab,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "GIO_096",
.start = 0xe0050140,
.end = 0xe005015f,
.start = 0xe00501c0,
.end = 0xe00501df,
.flags = IORESOURCE_MEM,
},
[2] = {
......
......@@ -62,7 +62,7 @@ enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
static const struct plat_sci_port scif[] = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
......
......@@ -101,7 +101,7 @@ static const char * const zynq_dt_match[] = {
NULL
};
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.smp = smp_ops(zynq_smp_ops),
.map_io = zynq_map_io,
.init_machine = zynq_init_machine,
......
......@@ -396,7 +396,7 @@ static int __init rx51_soc_init(void)
{
int err;
if (!machine_is_nokia_rx51())
if (!machine_is_nokia_rx51() && !of_machine_is_compatible("nokia,omap3-n900"))
return -ENODEV;
err = gpio_request_one(RX51_TVOUT_SEL_GPIO,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment