Commit 9672850b authored by Ezequiel Garcia's avatar Ezequiel Garcia Committed by David S. Miller

net: mvneta: Clean-up mvneta_init()

This commit cleans-up mvneta_init(), which initializes the hardware
and allocates the rx/qx queues. The queue allocation is simplified
by using devm_kcalloc instead of kzalloc. The unused phy_addr parameter
is removed. While here, the 'hal' references in the comments are removed.
This commit makes no functionality change.
Signed-off-by: default avatarEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a92dbd96
......@@ -2133,7 +2133,7 @@ static void mvneta_tx_reset(struct mvneta_port *pp)
{
int queue;
/* free the skb's in the hal tx ring */
/* free the skb's in the tx ring */
for (queue = 0; queue < txq_number; queue++)
mvneta_txq_done_force(pp, &pp->txqs[queue]);
......@@ -2788,7 +2788,7 @@ const struct ethtool_ops mvneta_eth_tool_ops = {
};
/* Initialize hw */
static int mvneta_init(struct mvneta_port *pp, int phy_addr)
static int mvneta_init(struct device *dev, struct mvneta_port *pp)
{
int queue;
......@@ -2798,8 +2798,8 @@ static int mvneta_init(struct mvneta_port *pp, int phy_addr)
/* Set port default values */
mvneta_defaults_set(pp);
pp->txqs = kzalloc(txq_number * sizeof(struct mvneta_tx_queue),
GFP_KERNEL);
pp->txqs = devm_kcalloc(dev, txq_number, sizeof(struct mvneta_tx_queue),
GFP_KERNEL);
if (!pp->txqs)
return -ENOMEM;
......@@ -2811,12 +2811,10 @@ static int mvneta_init(struct mvneta_port *pp, int phy_addr)
txq->done_pkts_coal = MVNETA_TXDONE_COAL_PKTS;
}
pp->rxqs = kzalloc(rxq_number * sizeof(struct mvneta_rx_queue),
GFP_KERNEL);
if (!pp->rxqs) {
kfree(pp->txqs);
pp->rxqs = devm_kcalloc(dev, rxq_number, sizeof(struct mvneta_rx_queue),
GFP_KERNEL);
if (!pp->rxqs)
return -ENOMEM;
}
/* Create Rx descriptor rings */
for (queue = 0; queue < rxq_number; queue++) {
......@@ -2830,12 +2828,6 @@ static int mvneta_init(struct mvneta_port *pp, int phy_addr)
return 0;
}
static void mvneta_deinit(struct mvneta_port *pp)
{
kfree(pp->txqs);
kfree(pp->rxqs);
}
/* platform glue : initialize decoding windows */
static void mvneta_conf_mbus_windows(struct mvneta_port *pp,
const struct mbus_dram_target_info *dram)
......@@ -2918,7 +2910,6 @@ static int mvneta_probe(struct platform_device *pdev)
struct resource *res;
struct device_node *dn = pdev->dev.of_node;
struct device_node *phy_node;
u32 phy_addr;
struct mvneta_port *pp;
struct net_device *dev;
const char *dt_mac_addr;
......@@ -3027,16 +3018,14 @@ static int mvneta_probe(struct platform_device *pdev)
pp->dev = dev;
SET_NETDEV_DEV(dev, &pdev->dev);
err = mvneta_init(pp, phy_addr);
if (err < 0) {
dev_err(&pdev->dev, "can't init eth hal\n");
err = mvneta_init(&pdev->dev, pp);
if (err < 0)
goto err_free_stats;
}
err = mvneta_port_power_up(pp, phy_mode);
if (err < 0) {
dev_err(&pdev->dev, "can't power up port\n");
goto err_deinit;
goto err_free_stats;
}
dram_target_info = mv_mbus_dram_info();
......@@ -3053,7 +3042,7 @@ static int mvneta_probe(struct platform_device *pdev)
err = register_netdev(dev);
if (err < 0) {
dev_err(&pdev->dev, "failed to register\n");
goto err_deinit;
goto err_free_stats;
}
netdev_info(dev, "Using %s mac address %pM\n", mac_from,
......@@ -3063,8 +3052,6 @@ static int mvneta_probe(struct platform_device *pdev)
return 0;
err_deinit:
mvneta_deinit(pp);
err_free_stats:
free_percpu(pp->stats);
err_clk:
......@@ -3083,7 +3070,6 @@ static int mvneta_remove(struct platform_device *pdev)
struct mvneta_port *pp = netdev_priv(dev);
unregister_netdev(dev);
mvneta_deinit(pp);
clk_disable_unprepare(pp->clk);
free_percpu(pp->stats);
irq_dispose_mapping(dev->irq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment