Commit 969780f8 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6

parents ad8f76be 8750197f
......@@ -7,12 +7,10 @@ Supported adapters:
* VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
Datasheet: available on request from Via
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R
Datasheet: available on request from VIA
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Kysti Mlkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Jean Delvare <khali@linux-fr.org>
......
......@@ -412,7 +412,7 @@ For now, you can ignore the `flags' parameter. It is there for future use.
release_region(address,FOO_EXTENT);
/* SENSORS ONLY END */
ERROR1:
kfree(new_client);
kfree(data);
ERROR0:
return err;
}
......@@ -443,7 +443,7 @@ much simpler than the attachment code, fortunately!
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
kfree(data);
kfree(i2c_get_clientdata(client));
return 0;
}
......
......@@ -180,11 +180,10 @@ superio_exit(void)
#define W83781D_REG_BANK 0x4E
#define W83781D_REG_CONFIG 0x40
#define W83781D_REG_ALARM1 0x41
#define W83781D_REG_ALARM2 0x42
#define W83781D_REG_ALARM3 0x450
#define W83781D_REG_ALARM1 0x459
#define W83781D_REG_ALARM2 0x45A
#define W83781D_REG_ALARM3 0x45B
#define W83781D_REG_IRQ 0x4C
#define W83781D_REG_BEEP_CONFIG 0x4D
#define W83781D_REG_BEEP_INTS1 0x56
#define W83781D_REG_BEEP_INTS2 0x57
......@@ -1370,13 +1369,6 @@ static void w83627hf_init_client(struct i2c_client *client)
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
/* enable comparator mode for temp2 and temp3 so
alarm indication will work correctly */
i = w83627hf_read_value(client, W83781D_REG_IRQ);
if (!(i & 0x40))
w83627hf_write_value(client, W83781D_REG_IRQ,
i | 0x40);
}
/* Start monitoring */
......@@ -1400,7 +1392,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev)
/* skip missing sensors */
if (((data->type == w83697hf) && (i == 1)) ||
((data->type == w83627thf || data->type == w83637hf)
&& (i == 4 || i == 5)))
&& (i == 5 || i == 6)))
continue;
data->in[i] =
w83627hf_read_value(client, W83781D_REG_IN(i));
......
......@@ -142,19 +142,18 @@ static int vt596_transaction(u8 size)
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
"Resetting... ", temp);
"Resetting...\n", temp);
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
printk("Failed! (0x%02x)\n", temp);
dev_err(&vt596_adapter.dev, "SMBus reset failed! "
"(0x%02x)\n", temp);
return -1;
} else {
printk("Successful!\n");
}
}
/* Start the transaction by setting bit 6 */
outb_p(0x40 | (size & 0x3C), SMBHSTCNT);
outb_p(0x40 | size, SMBHSTCNT);
/* We will always wait for a fraction of a second */
do {
......@@ -171,7 +170,7 @@ static int vt596_transaction(u8 size)
if (temp & 0x10) {
result = -1;
dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
inb_p(SMBHSTCNT) & 0x3C);
size);
}
if (temp & 0x08) {
......@@ -180,11 +179,13 @@ static int vt596_transaction(u8 size)
}
if (temp & 0x04) {
int read = inb_p(SMBHSTADD) & 0x01;
result = -1;
/* Quick commands are used to probe for chips, so
errors are expected, and we don't want to frighten the
user. */
if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
/* The quick and receive byte commands are used to probe
for chips, so errors are expected, and we don't want
to frighten the user. */
if (!((size == VT596_QUICK && !read) ||
(size == VT596_BYTE && read)))
dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
......@@ -462,9 +463,9 @@ static void __exit i2c_vt596_exit(void)
}
}
MODULE_AUTHOR(
"Frodo Looijaard <frodol@dds.nl> and "
"Philip Edelbrock <phil@netroedge.com>");
MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
"Mark D. Studebaker <mdsxyz123@yahoo.com> and "
"Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
MODULE_LICENSE("GPL");
......
......@@ -164,9 +164,9 @@ static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
buf[1] = BIN2BCD(dt->tm_sec);
buf[2] = BIN2BCD(dt->tm_min);
buf[3] = BIN2BCD(dt->tm_hour);
buf[4] = BIN2BCD(dt->tm_wday) + 1;
buf[4] = BIN2BCD(dt->tm_wday + 1);
buf[5] = BIN2BCD(dt->tm_mday);
buf[6] = BIN2BCD(dt->tm_mon) + 1;
buf[6] = BIN2BCD(dt->tm_mon + 1);
val = dt->tm_year;
if (val >= 100) {
val -= 100;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment