Merge tag 'mips_fixes_5.6.1' into mips-next

Pull in mips-fixes avoiding conflicts with more CI20 DT changes.

A few MIPS fixes:

- DT fixes for CI20

- Fix command line handling

- Correct patchwork URL
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

CREDITS

@@ -567,6 +567,11 @@ D: Original author of Amiga FFS filesystem
 S: Orlando, Florida
 S: USA
 
+N: Paul Burton
+E: paulburton@kernel.org
+W: https://pburton.com
+D: MIPS maintainer 2018-2020
+
 N: Lennert Buytenhek
 E: kernel@wantstofly.org
 D: Original (2.4) rewrite of the ethernet bridging code

MAINTAINERS

@@ -11114,14 +11114,12 @@ S:	Maintained
 F:	drivers/usb/image/microtek.*
 
 MIPS
-M:	Ralf Baechle <ralf@linux-mips.org>
-M:	Paul Burton <paulburton@kernel.org>
+M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
-T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
-Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
-S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-mips/list/
+S:	Maintained
 F:	Documentation/devicetree/bindings/mips/
 F:	Documentation/mips/
 F:	arch/mips/

arch/mips/boot/dts/ingenic/ci20.dts

@@ -4,6 +4,8 @@
 #include "jz4780.dtsi"
 #include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
 
 / {
 	compatible = "img,ci20", "ingenic,jz4780";
@@ -163,63 +165,71 @@ act8600: act8600@5a {
 
 		regulators {
 			vddcore: SUDCDC1 {
-				regulator-name = "VDDCORE";
+				regulator-name = "DCDC_REG1";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 			vddmem: SUDCDC2 {
-				regulator-name = "VDDMEM";
+				regulator-name = "DCDC_REG2";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
 			vcc_33: SUDCDC3 {
-				regulator-name = "VCC33";
+				regulator-name = "DCDC_REG3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 			vcc_50: SUDCDC4 {
-				regulator-name = "VCC50";
+				regulator-name = "SUDCDC_REG4";
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5000000>;
 				regulator-always-on;
 			};
 			vcc_25: LDO_REG5 {
-				regulator-name = "VCC25";
+				regulator-name = "LDO_REG5";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 			wifi_io: LDO_REG6 {
-				regulator-name = "WIFIIO";
+				regulator-name = "LDO_REG6";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 			vcc_28: LDO_REG7 {
-				regulator-name = "VCC28";
+				regulator-name = "LDO_REG7";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 			vcc_15: LDO_REG8 {
-				regulator-name = "VCC15";
+				regulator-name = "LDO_REG8";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
-			vcc_18: LDO_REG9 {
-				regulator-name = "VCC18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
+			vrtc_18: LDO_REG9 {
+				regulator-name = "LDO_REG9";
+				/* Despite the datasheet stating 3.3V
+				 * for REG9 and the driver expecting that,
+				 * REG9 outputs 1.8V.
+				 * Likely the CI20 uses a proprietary
+				 * factory programmed chip variant.
+				 * Since this is a simple on/off LDO the
+				 * exact values do not matter.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 			vcc_11: LDO_REG10 {
-				regulator-name = "VCC11";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-name = "LDO_REG10";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 		};
@@ -261,7 +271,9 @@ &i2c4 {
 		rtc@51 {
 			compatible = "nxp,pcf8563";
 			reg = <0x51>;
-			interrupts = <110>;
+
+			interrupt-parent = <&gpf>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		};
 };
 

arch/mips/boot/dts/ingenic/jz4740.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
 	#address-cells = <1>;
@@ -45,14 +46,6 @@ cgu: jz4740-cgu@10000000 {
 		#clock-cells = <1>;
 	};
 
-	watchdog: watchdog@10002000 {
-		compatible = "ingenic,jz4740-watchdog";
-		reg = <0x10002000 0x10>;
-
-		clocks = <&cgu JZ4740_CLK_RTC>;
-		clock-names = "rtc";
-	};
-
 	tcu: timer@10002000 {
 		compatible = "ingenic,jz4740-tcu", "simple-mfd";
 		reg = <0x10002000 0x1000>;
@@ -73,6 +66,14 @@ &cgu JZ4740_CLK_PCLK
 
 		interrupt-parent = <&intc>;
 		interrupts = <23 22 21>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
 	};
 
 	rtc_dev: rtc@10003000 {

arch/mips/boot/dts/ingenic/jz4780.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/dma/jz4780-dma.h>
 
 / {
@@ -67,6 +68,14 @@ &cgu JZ4780_CLK_EXCLK
 
 		interrupt-parent = <&intc>;
 		interrupts = <27 26 25>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4780-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
 	};
 
 	rtc_dev: rtc@10003000 {
@@ -348,14 +357,6 @@ i2c4: i2c@10054000 {
 		status = "disabled";
 	};
 
-	watchdog: watchdog@10002000 {
-		compatible = "ingenic,jz4780-watchdog";
-		reg = <0x10002000 0x10>;
-
-		clocks = <&cgu JZ4780_CLK_RTCLK>;
-		clock-names = "rtc";
-	};
-
 	nemc: nemc@13410000 {
 		compatible = "ingenic,jz4780-nemc";
 		reg = <0x13410000 0x10000>;

arch/mips/boot/dts/ingenic/x1000.dtsi

 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/clock/x1000-cgu.h>
 #include <dt-bindings/dma/x1000-dma.h>
 
@@ -72,7 +73,7 @@ wdt: watchdog@0 {
 			compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
 			reg = <0x0 0x10>;
 
-			clocks = <&cgu X1000_CLK_RTCLK>;
+			clocks = <&tcu TCU_CLK_WDT>;
 			clock-names = "wdt";
 		};
 	};
@@ -158,7 +159,6 @@ gpd: gpio@3 {
 	i2c0: i2c-controller@10050000 {
 		compatible = "ingenic,x1000-i2c";
 		reg = <0x10050000 0x1000>;
-
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -173,7 +173,6 @@ i2c0: i2c-controller@10050000 {
 	i2c1: i2c-controller@10051000 {
 		compatible = "ingenic,x1000-i2c";
 		reg = <0x10051000 0x1000>;
-
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -188,7 +187,6 @@ i2c1: i2c-controller@10051000 {
 	i2c2: i2c-controller@10052000 {
 		compatible = "ingenic,x1000-i2c";
 		reg = <0x10052000 0x1000>;
-
 		#address-cells = <1>;
 		#size-cells = <0>;
 

arch/mips/include/asm/sync.h

@@ -155,9 +155,11 @@
  * effective barrier as noted by commit 6b07d38aaa52 ("MIPS: Octeon: Use
  * optimized memory barrier primitives."). Here we specify that the affected
  * sync instructions should be emitted twice.
+ * Note that this expression is evaluated by the assembler (not the compiler),
+ * and that the assembler evaluates '==' as 0 or -1, not 0 or 1.
  */
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
-# define __SYNC_rpt(type)	(1 + (type == __SYNC_wmb))
+# define __SYNC_rpt(type)	(1 - (type == __SYNC_wmb))
 #else
 # define __SYNC_rpt(type)	1
 #endif

arch/mips/kernel/setup.c

@@ -605,7 +605,8 @@ static void __init bootcmdline_init(char **cmdline_p)
 	 * If we're configured to take boot arguments from DT, look for those
 	 * now.
 	 */
-	if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB))
+	if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) ||
+	    IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND))
 		of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs);
 #endif
 

arch/mips/kernel/vpe.c

@@ -134,7 +134,7 @@ void release_vpe(struct vpe *v)
 {
 	list_del(&v->list);
 	if (v->load_addr)
-		release_progmem(v);
+		release_progmem(v->load_addr);
 	kfree(v);
 }
 

arch/mips/vdso/Makefile

@@ -33,6 +33,7 @@ endif
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
 	-O3 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \
+	-mrelax-pic-calls $(call cc-option, -mexplicit-relocs) \
 	-fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \
 	$(call cc-option, -fno-asynchronous-unwind-tables) \
 	$(call cc-option, -fno-stack-protector)
@@ -51,6 +52,8 @@ endif
 
 CFLAGS_REMOVE_vgettimeofday.o = -pg
 
+DISABLE_VDSO := n
+
 #
 # For the pre-R6 code in arch/mips/vdso/vdso.h for locating
 # the base address of VDSO, the linker will emit a R_MIPS_PC32
@@ -64,11 +67,24 @@ CFLAGS_REMOVE_vgettimeofday.o = -pg
 ifndef CONFIG_CPU_MIPSR6
   ifeq ($(call ld-ifversion, -lt, 225000000, y),y)
     $(warning MIPS VDSO requires binutils >= 2.25)
-    obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y))
-    ccflags-vdso += -DDISABLE_MIPS_VDSO
+    DISABLE_VDSO := y
   endif
 endif
 
+#
+# GCC (at least up to version 9.2) appears to emit function calls that make use
+# of the GOT when targeting microMIPS, which we can't use in the VDSO due to
+# the lack of relocations. As such, we disable the VDSO for microMIPS builds.
+#
+ifdef CONFIG_CPU_MICROMIPS
+  DISABLE_VDSO := y
+endif
+
+ifeq ($(DISABLE_VDSO),y)
+  obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y))
+  ccflags-vdso += -DDISABLE_MIPS_VDSO
+endif
+
 # VDSO linker flags.
 VDSO_LDFLAGS := \
 	-Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \
@@ -81,12 +97,18 @@ GCOV_PROFILE := n
 UBSAN_SANITIZE := n
 KCOV_INSTRUMENT := n
 
+# Check that we don't have PIC 'jalr t9' calls left
+quiet_cmd_vdso_mips_check = VDSOCHK $@
+      cmd_vdso_mips_check = if $(OBJDUMP) --disassemble $@ | egrep -h "jalr.*t9" > /dev/null; \
+		       then (echo >&2 "$@: PIC 'jalr t9' calls are not supported"; \
+			     rm -f $@; /bin/false); fi
+
 #
 # Shared build commands.
 #
 
 quiet_cmd_vdsold_and_vdso_check = LD      $@
-      cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check)
+      cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check); $(cmd_vdso_mips_check)
 
 quiet_cmd_vdsold = VDSO    $@
       cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \