x86/entry/32: Add debug code to check entry/exit CR3

Add code to check whether the kernel is entered and left with the correct
CR3 and make it depend on CONFIG_DEBUG_ENTRY.  This is needed because there
is no NX protection of user-addresses in the kernel-CR3 on x86-32 and that
type of bug would not be detected otherwise.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-40-git-send-email-joro@8bytes.org

arch/x86/entry/entry_32.S

@@ -166,6 +166,24 @@
 .Lend_\@:
 .endm
 
+.macro BUG_IF_WRONG_CR3 no_user_check=0
+#ifdef CONFIG_DEBUG_ENTRY
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	.if \no_user_check == 0
+	/* coming from usermode? */
+	testl	$SEGMENT_RPL_MASK, PT_CS(%esp)
+	jz	.Lend_\@
+	.endif
+	/* On user-cr3? */
+	movl	%cr3, %eax
+	testl	$PTI_SWITCH_MASK, %eax
+	jnz	.Lend_\@
+	/* From userspace with kernel cr3 - BUG */
+	ud2
+.Lend_\@:
+#endif
+.endm
+
 /*
  * Switch to kernel cr3 if not already loaded and return current cr3 in
  * \scratch_reg
@@ -213,6 +231,8 @@
 .macro SAVE_ALL_NMI cr3_reg:req
 	SAVE_ALL
 
+	BUG_IF_WRONG_CR3
+
 	/*
 	 * Now switch the CR3 when PTI is enabled.
 	 *
@@ -224,6 +244,7 @@
 
 .Lend_\@:
 .endm
+
 /*
  * This is a sneaky trick to help the unwinder find pt_regs on the stack.  The
  * frame pointer is replaced with an encoded pointer to pt_regs.  The encoding
@@ -287,6 +308,8 @@
 
 .Lswitched_\@:
 
+	BUG_IF_WRONG_CR3
+
 	RESTORE_REGS pop=\pop
 .endm
 
@@ -357,6 +380,8 @@
 
 	ALTERNATIVE     "", "jmp .Lend_\@", X86_FEATURE_XENPV
 
+	BUG_IF_WRONG_CR3
+
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
 
 	/*
@@ -799,6 +824,7 @@ ENTRY(entry_SYSENTER_32)
 	 */
 	pushfl
 	pushl	%eax
+	BUG_IF_WRONG_CR3 no_user_check=1
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
 	popl	%eax
 	popfl
@@ -893,6 +919,7 @@ ENTRY(entry_SYSENTER_32)
 	 * whereas POPF does not.)
 	 */
 	btrl	$X86_EFLAGS_IF_BIT, (%esp)
+	BUG_IF_WRONG_CR3 no_user_check=1
 	popfl
 	popl	%eax
 
@@ -970,6 +997,8 @@ restore_all:
 	/* Switch back to user CR3 */
 	SWITCH_TO_USER_CR3 scratch_reg=%eax
 
+	BUG_IF_WRONG_CR3
+
 	/* Restore user state */
 	RESTORE_REGS pop=4			# skip orig_eax/error_code
 .Lirq_return:
@@ -983,6 +1012,7 @@ restore_all:
 restore_all_kernel:
 	TRACE_IRQS_IRET
 	PARANOID_EXIT_TO_KERNEL_MODE
+	BUG_IF_WRONG_CR3
 	RESTORE_REGS 4
 	jmp	.Lirq_return
 
@@ -990,6 +1020,19 @@ restore_all_kernel:
 ENTRY(iret_exc	)
 	pushl	$0				# no error code
 	pushl	$do_iret_error
+
+#ifdef CONFIG_DEBUG_ENTRY
+	/*
+	 * The stack-frame here is the one that iret faulted on, so its a
+	 * return-to-user frame. We are on kernel-cr3 because we come here from
+	 * the fixup code. This confuses the CR3 checker, so switch to user-cr3
+	 * as the checker expects it.
+	 */
+	pushl	%eax
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+	popl	%eax
+#endif
+
 	jmp	common_exception
 .previous
 	_ASM_EXTABLE(.Lirq_return, iret_exc)