Commit 97207482 authored by James Smart's avatar James Smart Committed by James Bottomley

[SCSI] lpfc 8.3.0 : Added 3 small features and improve PCI EEH support

- Added FC_REG_VPORTRSCN_EVENT to lpfc_nl.h

- Added code to provide option ROM version from HBA and via sysfs

- Added support for HPS bit in config port mailbox command to tell HBA
  that host group pointers are in host memory.

- Bugfix for Extended Error Handling (EEH) support on IBM PowerPC P6
  platform with MSI enabled
Signed-off-by: default avatarJames Smart <James.Smart@emulex.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent eada272d
...@@ -22,6 +22,7 @@ typedef int (*node_filter)(struct lpfc_nodelist *, void *); ...@@ -22,6 +22,7 @@ typedef int (*node_filter)(struct lpfc_nodelist *, void *);
struct fc_rport; struct fc_rport;
void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t); void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
......
...@@ -2362,6 +2362,30 @@ typedef struct { ...@@ -2362,6 +2362,30 @@ typedef struct {
#define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */ #define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */
#define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */ #define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */
#define WAKE_UP_PARMS_REGION_ID 4
#define WAKE_UP_PARMS_WORD_SIZE 15
/* Option rom version structure */
struct prog_id {
#ifdef __BIG_ENDIAN_BITFIELD
uint8_t type;
uint8_t id;
uint32_t ver:4; /* Major Version */
uint32_t rev:4; /* Revision */
uint32_t lev:2; /* Level */
uint32_t dist:2; /* Dist Type */
uint32_t num:4; /* number after dist type */
#else /* __LITTLE_ENDIAN_BITFIELD */
uint32_t num:4; /* number after dist type */
uint32_t dist:2; /* Dist Type */
uint32_t lev:2; /* Level */
uint32_t rev:4; /* Revision */
uint32_t ver:4; /* Major Version */
uint8_t id;
uint8_t type;
#endif
};
/* Structure for MB Command UPDATE_CFG (0x1B) */ /* Structure for MB Command UPDATE_CFG (0x1B) */
struct update_cfg_var { struct update_cfg_var {
...@@ -2555,10 +2579,17 @@ typedef struct { ...@@ -2555,10 +2579,17 @@ typedef struct {
uint32_t pcbLow; /* bit 31:0 of memory based port config block */ uint32_t pcbLow; /* bit 31:0 of memory based port config block */
uint32_t pcbHigh; /* bit 63:32 of memory based port config block */ uint32_t pcbHigh; /* bit 63:32 of memory based port config block */
uint32_t hbainit[6]; uint32_t hbainit[5];
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t hps : 1; /* bit 31 word9 Host Pointer in slim */
uint32_t rsvd : 31; /* least significant 31 bits of word 9 */
#else /* __LITTLE_ENDIAN */
uint32_t rsvd : 31; /* least significant 31 bits of word 9 */
uint32_t hps : 1; /* bit 31 word9 Host Pointer in slim */
#endif
#ifdef __BIG_ENDIAN_BITFIELD #ifdef __BIG_ENDIAN_BITFIELD
uint32_t rsvd : 24; /* Reserved */ uint32_t rsvd1 : 24; /* Reserved */
uint32_t cmv : 1; /* Configure Max VPIs */ uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */ uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t csah : 1; /* Configure Synchronous Abort Handling */ uint32_t csah : 1; /* Configure Synchronous Abort Handling */
...@@ -2576,7 +2607,7 @@ typedef struct { ...@@ -2576,7 +2607,7 @@ typedef struct {
uint32_t csah : 1; /* Configure Synchronous Abort Handling */ uint32_t csah : 1; /* Configure Synchronous Abort Handling */
uint32_t ccrp : 1; /* Config Command Ring Polling */ uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */ uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t rsvd : 24; /* Reserved */ uint32_t rsvd1 : 24; /* Reserved */
#endif #endif
#ifdef __BIG_ENDIAN_BITFIELD #ifdef __BIG_ENDIAN_BITFIELD
uint32_t rsvd2 : 24; /* Reserved */ uint32_t rsvd2 : 24; /* Reserved */
......
...@@ -235,6 +235,48 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) ...@@ -235,6 +235,48 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
return; return;
} }
/**
* lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
* command used for getting wake up parameters.
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
* This is the completion handler for dump mailbox command for getting
* wake up parameters. When this command complete, the response contain
* Option rom version of the HBA. This function translate the version number
* into a human readable string and store it in OptionROMVersion.
**/
static void
lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
struct prog_id *prg;
uint32_t prog_id_word;
char dist = ' ';
/* character array used for decoding dist type. */
char dist_char[] = "nabx";
if (pmboxq->mb.mbxStatus != MBX_SUCCESS)
return;
prg = (struct prog_id *) &prog_id_word;
/* word 7 contain option rom version */
prog_id_word = pmboxq->mb.un.varWords[7];
/* Decode the Option rom version word to a readable string */
if (prg->dist < 4)
dist = dist_char[prg->dist];
if ((prg->dist == 3) && (prg->num == 0))
sprintf(phba->OptionROMVersion, "%d.%d%d",
prg->ver, prg->rev, prg->lev);
else
sprintf(phba->OptionROMVersion, "%d.%d%d%c%d",
prg->ver, prg->rev, prg->lev,
dist, prg->num);
return;
}
/** /**
* lpfc_config_port_post: Perform lpfc initialization after config port. * lpfc_config_port_post: Perform lpfc initialization after config port.
* @phba: pointer to lpfc hba data structure. * @phba: pointer to lpfc hba data structure.
...@@ -482,6 +524,20 @@ lpfc_config_port_post(struct lpfc_hba *phba) ...@@ -482,6 +524,20 @@ lpfc_config_port_post(struct lpfc_hba *phba)
rc); rc);
mempool_free(pmb, phba->mbox_mem_pool); mempool_free(pmb, phba->mbox_mem_pool);
} }
/* Get Option rom version */
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
lpfc_dump_wakeup_param(phba, pmb);
pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
pmb->vport = phba->pport;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0435 Adapter failed "
"to get Option ROM version status x%x\n.", rc);
mempool_free(pmb, phba->mbox_mem_pool);
}
return 0; return 0;
} }
...@@ -2406,6 +2462,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) ...@@ -2406,6 +2462,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
phba->eratt_poll.data = (unsigned long) phba; phba->eratt_poll.data = (unsigned long) phba;
pci_set_master(pdev); pci_set_master(pdev);
pci_save_state(pdev);
pci_try_set_mwi(pdev); pci_try_set_mwi(pdev);
if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0) if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
...@@ -2982,7 +3039,9 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev) ...@@ -2982,7 +3039,9 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT; return PCI_ERS_RESULT_DISCONNECT;
} }
pci_set_master(pdev); pci_restore_state(pdev);
if (pdev->is_busmaster)
pci_set_master(pdev);
spin_lock_irq(&phba->hbalock); spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI2_ACTIVE; psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
......
...@@ -76,6 +76,38 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset) ...@@ -76,6 +76,38 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
return; return;
} }
/**
* lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* This function create a dump memory mailbox command to dump wake up
* parameters.
*/
void
lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t *mb;
void *ctx;
mb = &pmb->mb;
/* Save context so that we can restore after memset */
ctx = pmb->context2;
/* Setup to dump VPD region */
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
mb->mbxCommand = MBX_DUMP_MEMORY;
mb->mbxOwner = OWN_HOST;
mb->un.varDmp.cv = 1;
mb->un.varDmp.type = DMP_NV_PARAMS;
mb->un.varDmp.entry_index = 0;
mb->un.varDmp.region_id = WAKE_UP_PARMS_REGION_ID;
mb->un.varDmp.word_cnt = WAKE_UP_PARMS_WORD_SIZE;
mb->un.varDmp.co = 0;
mb->un.varDmp.resp_offset = 0;
pmb->context2 = ctx;
return;
}
/** /**
* lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param. * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
* @phba: pointer to lpfc hba data structure. * @phba: pointer to lpfc hba data structure.
...@@ -1061,6 +1093,9 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) ...@@ -1061,6 +1093,9 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr); mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr);
mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr); mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr);
/* Always Host Group Pointer is in SLIM */
mb->un.varCfgPort.hps = 1;
/* If HBA supports SLI=3 ask for it */ /* If HBA supports SLI=3 ask for it */
if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) { if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
......
...@@ -22,18 +22,20 @@ ...@@ -22,18 +22,20 @@
#define FC_REG_LINK_EVENT 0x0001 /* link up / down events */ #define FC_REG_LINK_EVENT 0x0001 /* link up / down events */
#define FC_REG_RSCN_EVENT 0x0002 /* RSCN events */ #define FC_REG_RSCN_EVENT 0x0002 /* RSCN events */
#define FC_REG_CT_EVENT 0x0004 /* CT request events */ #define FC_REG_CT_EVENT 0x0004 /* CT request events */
#define FC_REG_DUMP_EVENT 0x0008 /* Dump events */ #define FC_REG_DUMP_EVENT 0x0010 /* Dump events */
#define FC_REG_TEMPERATURE_EVENT 0x0010 /* temperature events */ #define FC_REG_TEMPERATURE_EVENT 0x0020 /* temperature events */
#define FC_REG_ELS_EVENT 0x0020 /* lpfc els events */ #define FC_REG_VPORTRSCN_EVENT 0x0040 /* Vport RSCN events */
#define FC_REG_FABRIC_EVENT 0x0040 /* lpfc fabric events */ #define FC_REG_ELS_EVENT 0x0080 /* lpfc els events */
#define FC_REG_SCSI_EVENT 0x0080 /* lpfc scsi events */ #define FC_REG_FABRIC_EVENT 0x0100 /* lpfc fabric events */
#define FC_REG_BOARD_EVENT 0x0100 /* lpfc board events */ #define FC_REG_SCSI_EVENT 0x0200 /* lpfc scsi events */
#define FC_REG_ADAPTER_EVENT 0x0200 /* lpfc adapter events */ #define FC_REG_BOARD_EVENT 0x0400 /* lpfc board events */
#define FC_REG_ADAPTER_EVENT 0x0800 /* lpfc adapter events */
#define FC_REG_EVENT_MASK (FC_REG_LINK_EVENT | \ #define FC_REG_EVENT_MASK (FC_REG_LINK_EVENT | \
FC_REG_RSCN_EVENT | \ FC_REG_RSCN_EVENT | \
FC_REG_CT_EVENT | \ FC_REG_CT_EVENT | \
FC_REG_DUMP_EVENT | \ FC_REG_DUMP_EVENT | \
FC_REG_TEMPERATURE_EVENT | \ FC_REG_TEMPERATURE_EVENT | \
FC_REG_VPORTRSCN_EVENT | \
FC_REG_ELS_EVENT | \ FC_REG_ELS_EVENT | \
FC_REG_FABRIC_EVENT | \ FC_REG_FABRIC_EVENT | \
FC_REG_SCSI_EVENT | \ FC_REG_SCSI_EVENT | \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment