dt-bindings: Drop redundant minItems/maxItems

If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.

This condition is partially checked with the meta-schema already, but
only if both 'minItems' and 'maxItems' are equal to the 'items' length.
An improved meta-schema is pending.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for MMC
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210615191543.1043414-1-robh@kernel.org

Documentation/devicetree/bindings/ata/nvidia,tegra-ahci.yaml

@@ -20,7 +20,6 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 3
     items:
       - description: AHCI registers
       - description: SATA configuration and IPFS registers

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml

@@ -51,7 +51,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: High Frequency Oscillator (usually at 24MHz)
       - description: Low Frequency Oscillator (usually at 32kHz)
@@ -60,7 +59,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: hosc
       - const: losc

Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml

@@ -46,7 +46,6 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: calib
       - const: calib_backup

Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml

@@ -27,7 +27,6 @@ properties:
       - description: Sleep clock source
       - description: PLL test clock source (Optional clock)
     minItems: 2
-    maxItems: 3
 
   clock-names:
     items:
@@ -35,7 +34,6 @@ properties:
       - const: sleep_clk
       - const: core_bi_pll_test_se # Optional clock
     minItems: 2
-    maxItems: 3
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml

@@ -36,7 +36,6 @@ properties:
       - description: USB3 phy wrapper pipe clock source (Optional clock)
       - description: USB3 phy sec pipe clock source (Optional clock)
     minItems: 2
-    maxItems: 13
 
   clock-names:
     items:
@@ -54,7 +53,6 @@ properties:
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
       - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
-    maxItems: 13
 
   '#clock-cells':
     const: 1

Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml

@@ -40,7 +40,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 4
     items:
       - const: ext-26m
       - const: ext-32k

Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml

@@ -30,7 +30,6 @@ properties:
       - description: Module clock
       - description: MBus clock
     minItems: 2
-    maxItems: 3
 
   clock-names:
     items:
@@ -38,7 +37,6 @@ properties:
       - const: mod
       - const: ram
     minItems: 2
-    maxItems: 3
 
   resets:
     maxItems: 1

Documentation/devicetree/bindings/crypto/fsl-dcp.yaml

@@ -27,7 +27,6 @@ properties:
       - description: MXS DCP DCP interrupt
       - description: MXS DCP secure interrupt
     minItems: 2
-    maxItems: 3
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml

@@ -26,14 +26,12 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: Display Backend registers
       - description: SAT registers
 
   reg-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: be
       - const: sat
@@ -43,7 +41,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 4
     items:
       - description: The backend interface clock
       - description: The backend module clock
@@ -52,7 +49,6 @@ properties:
 
   clock-names:
     minItems: 3
-    maxItems: 4
     items:
       - const: ahb
       - const: mod
@@ -61,14 +57,12 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: The Backend reset line
       - description: The SAT reset line
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: be
       - const: sat

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml

@@ -24,7 +24,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Bus Clock
       - description: Module Clock

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml

@@ -46,7 +46,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 6
     items:
       - description: Bus Clock
       - description: Register Clock
@@ -57,7 +56,6 @@ properties:
 
   clock-names:
     minItems: 3
-    maxItems: 6
     items:
       - const: iahb
       - const: isfr
@@ -68,14 +66,12 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: HDMI Controller Reset
       - description: HDCP Reset
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: ctrl
       - const: hdcp

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml

@@ -27,7 +27,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: Bus Clock
       - description: Module Clock
@@ -36,7 +35,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: bus
       - const: mod

Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml

@@ -48,7 +48,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 6
     items:
       - description: The TCON TOP interface clock
       - description: The TCON TOP TV0 clock
@@ -59,7 +58,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 6
     items:
       - const: bus
       - const: tcon-tv0

Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml

@@ -39,7 +39,6 @@ properties:
       Names of maps with programmable addresses. It can contain any map
       needing a non-default address.
     minItems: 1
-    maxItems: 4
     items:
       - const: main
       - const: edid

Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml

@@ -18,7 +18,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description:
           Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
@@ -29,7 +28,6 @@ properties:
 
   reg-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: mhdptx
       - const: j721e-intg

Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml

@@ -29,7 +29,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 5
     items:
       - {}
       - {}
@@ -41,7 +40,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 5
     items:
       - {}
       - {}

Documentation/devicetree/bindings/display/st,stm32-dsi.yaml

@@ -29,7 +29,6 @@ properties:
       - description: DSI bus clock
       - description: Pixel clock
     minItems: 2
-    maxItems: 3
 
   clock-names:
     items:
@@ -37,7 +36,6 @@ properties:
       - const: ref
       - const: px_clk
     minItems: 2
-    maxItems: 3
 
   resets:
     maxItems: 1

Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml

@@ -22,7 +22,6 @@ properties:
       - description: events interrupt line.
       - description: errors interrupt line.
     minItems: 1
-    maxItems: 2
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml

@@ -65,7 +65,6 @@ properties:
       The APB clock and at least one video clock are mandatory, the audio clock
       is optional.
     minItems: 2
-    maxItems: 4
     items:
       - description: dp_apb_clk is the APB clock
       - description: dp_aud_clk is the Audio clock
@@ -78,13 +77,11 @@ properties:
   clock-names:
     oneOf:
       - minItems: 2
-        maxItems: 3
         items:
           - const: dp_apb_clk
           - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
           - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
       - minItems: 3
-        maxItems: 4
         items:
           - const: dp_apb_clk
           - const: dp_aud_clk
@@ -116,7 +113,6 @@ properties:
     maxItems: 2
   phy-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: dp-phy0
       - const: dp-phy1

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml

@@ -52,7 +52,6 @@ properties:
 
   interrupt-names:
     minItems: 9
-    maxItems: 17
     items:
       - const: error
       - pattern: "^ch([0-9]|1[0-5])$"

Documentation/devicetree/bindings/edac/amazon,al-mc-edac.yaml

@@ -30,14 +30,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: uncorrectable error interrupt
       - description: correctable error interrupt
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: ue
       - const: ce

Documentation/devicetree/bindings/eeprom/at24.yaml

@@ -32,7 +32,6 @@ properties:
     oneOf:
       - allOf:
           - minItems: 1
-            maxItems: 2
             items:
               - pattern: "^(atmel|catalyst|microchip|nxp|ramtron|renesas|rohm|st),(24(c|cs|lc|mac)[0-9]+|spd)$"
               - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"

Documentation/devicetree/bindings/example-schema.yaml

@@ -91,7 +91,6 @@ properties:
   interrupts:
     # Either 1 or 2 interrupts can be present
     minItems: 1
-    maxItems: 2
     items:
       - description: tx or combined interrupt
       - description: rx interrupt
@@ -105,7 +104,6 @@ properties:
   interrupt-names:
     # minItems must be specified here because the default would be 2
     minItems: 1
-    maxItems: 2
     items:
       - const: tx irq
       - const: rx irq

Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml

@@ -34,7 +34,6 @@ properties:
       - enum: [ bridge, gca ]
       - enum: [ bridge, gca ]
     minItems: 2
-    maxItems: 4
 
   interrupts:
     items:

Documentation/devicetree/bindings/gpu/vivante,gc.yaml

@@ -36,7 +36,6 @@ properties:
       - description: AHB/slave interface clock (only required if GPU can gate
           slave interface independently)
     minItems: 1
-    maxItems: 4
 
   clock-names:
     items:

Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml

@@ -21,7 +21,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: address offset and range of bus
       - description: address offset and range of bus buffer

Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml

@@ -21,7 +21,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: BSC register range
       - description: Auto-I2C register range

Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml

@@ -43,14 +43,12 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Reference clock for the I2C bus
       - description: Bus clock (Only for Armada 7K/8K)
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: core
       - const: reg

Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml

@@ -20,7 +20,6 @@ properties:
 
   reg:
     minItems: 3
-    maxItems: 4
     items:
       - description: Smbus block registers
       - description: Cause master registers

Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml

@@ -41,7 +41,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: clkin
       - const: core

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml

@@ -38,14 +38,12 @@ properties:
           dfsdm clock can also feed CLKOUT, when CLKOUT is used.
       - description: audio clock can be used as an alternate to feed CLKOUT.
     minItems: 1
-    maxItems: 2
 
   clock-names:
     items:
       - const: dfsdm
       - const: audio
     minItems: 1
-    maxItems: 2
 
   "#address-cells":
     const: 1

Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml

@@ -35,7 +35,6 @@ properties:
       - description: output interrupt 6
       - description: output interrupt 7
     minItems: 1
-    maxItems: 8
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

@@ -50,7 +50,6 @@ properties:
       - const: int2
       - const: int3
     minItems: 1
-    maxItems: 4
 
   '#interrupt-cells':
     const: 2

Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml

@@ -38,7 +38,6 @@ properties:
           If provided, then the combined interrupt will be used in preference to
           any others.
       - minItems: 2
-        maxItems: 4
         items:
           - const: eventq     # Event Queue not empty
           - const: gerror     # Global Error activated

Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml

@@ -49,7 +49,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     description:
       Specifiers for the MMU fault interrupts. Not required for cache IPMMUs.
     items:

Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml

@@ -32,7 +32,6 @@ properties:
       - description: tx channel free
       - description: wakeup source
     minItems: 2
-    maxItems: 3
 
   interrupt-names:
     items:
@@ -40,7 +39,6 @@ properties:
       - const: tx
       - const: wakeup
     minItems: 2
-    maxItems: 3
 
   wakeup-source: true
 

Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml

@@ -67,7 +67,6 @@ properties:
 
   clock-names:
     minItems: 4
-    maxItems: 5
     items:
       - const: dos_parser
       - const: dos

Documentation/devicetree/bindings/media/i2c/adv7604.yaml

@@ -30,7 +30,6 @@ properties:
 
   reg-names:
     minItems: 1
-    maxItems: 13
     items:
       - const: main
       - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]

Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml

@@ -43,7 +43,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
     items:
       - description: AXI bus interface clock
       - description: Peripheral clock

Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml

@@ -30,7 +30,6 @@ properties:
 
   power-domain-names:
     minItems: 2
-    maxItems: 3
     items:
       - const: venus
       - const: vcodec0

Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml

@@ -30,7 +30,6 @@ properties:
 
   power-domain-names:
     minItems: 3
-    maxItems: 4
     items:
       - const: venus
       - const: vcodec0

Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml

@@ -30,7 +30,6 @@ properties:
 
   power-domain-names:
     minItems: 2
-    maxItems: 3
     items:
       - const: venus
       - const: vcodec0

Documentation/devicetree/bindings/media/renesas,drif.yaml

@@ -67,7 +67,6 @@ properties:
     maxItems: 1
 
   clock-names:
-    maxItems: 1
     items:
       - const: fck
 
@@ -80,7 +79,6 @@ properties:
 
   dma-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: rx
       - const: rx

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml

@@ -53,14 +53,12 @@ properties:
       apb and smi are mandatory. the async is only for generation 1 smi HW.
       gals(global async local sync) also is optional, see below.
     minItems: 2
-    maxItems: 4
     items:
       - description: apb is Advanced Peripheral Bus clock, It's the clock for
           setting the register.
       - description: smi is the clock for transfer data and command.
-      - description: async is asynchronous clock, it help transform the smi
-          clock into the emi clock domain.
-      - description: gals0 is the path0 clock of gals.
+      - description: Either asynchronous clock to help transform the smi clock
+          into the emi clock domain on Gen1 h/w, or the path0 clock of gals.
       - description: gals1 is the path1 clock of gals.
 
   clock-names:

Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml

@@ -37,7 +37,6 @@ properties:
     description: |
       apb and smi are mandatory. gals(global async local sync) is optional.
     minItems: 2
-    maxItems: 3
     items:
       - description: apb is Advanced Peripheral Bus clock, It's the clock for
           setting the register.

Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml

@@ -64,7 +64,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 4
     items:
       - description: Bus Clock
       - description: Module Clock
@@ -73,7 +72,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 4
     items:
       - const: ahb
       - const: mmc

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml

@@ -116,7 +116,6 @@ properties:
 
   pinctrl-names:
     minItems: 1
-    maxItems: 4
     items:
       - const: default
       - const: state_100mhz

Documentation/devicetree/bindings/mmc/mtk-sd.yaml

@@ -38,7 +38,6 @@ properties:
     description:
       Should contain phandle for the clock feeding the MMC controller.
     minItems: 2
-    maxItems: 8
     items:
       - description: source clock (required).
       - description: HCLK which used for host (required).
@@ -51,7 +50,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 8
     items:
       - const: source
       - const: hclk

Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml

@@ -75,7 +75,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: core
       - const: cd
@@ -107,7 +106,6 @@ properties:
 
   pinctrl-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: default
       - const: state_uhs

Documentation/devicetree/bindings/mmc/sdhci-am654.yaml

@@ -45,7 +45,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: clk_ahb
       - const: clk_xin

Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml

@@ -57,7 +57,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: io
       - const: core

Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml

@@ -43,7 +43,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 4
           items:
             - description: GMAC main clock
             - description: First parent clock of the internal mux
@@ -52,7 +51,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 4
           items:
             - const: stmmaceth
             - const: clkin0

Documentation/devicetree/bindings/net/brcm,bcm4908-enet.yaml

@@ -23,14 +23,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: RX interrupt
       - description: TX interrupt
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: rx
       - const: tx

Documentation/devicetree/bindings/net/can/bosch,m_can.yaml

@@ -30,14 +30,12 @@ properties:
       - description: interrupt line0
       - description: interrupt line1
     minItems: 1
-    maxItems: 2
 
   interrupt-names:
     items:
       - const: int0
       - const: int1
     minItems: 1
-    maxItems: 2
 
   clocks:
     items:

Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml

@@ -48,14 +48,12 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: switch's main clock
       - description: dividing of the switch core clock
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: sw_switch
       - const: sw_switch_mdiv

Documentation/devicetree/bindings/net/mdio-gpio.yaml

@@ -28,7 +28,6 @@ properties:
 
   gpios:
     minItems: 2
-    maxItems: 3
     items:
       - description: MDC
       - description: MDIO

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -82,7 +82,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 3
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
@@ -90,7 +89,6 @@ properties:
 
   interrupt-names:
     minItems: 1
-    maxItems: 3
     items:
       - const: macirq
       - const: eth_wake_irq

Documentation/devicetree/bindings/net/stm32-dwmac.yaml

@@ -46,7 +46,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 5
     items:
       - description: GMAC main clock
       - description: MAC TX clock

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -25,14 +25,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: PCIe host controller
       - description: builtin MSI controller
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: pcie
       - const: msi

Documentation/devicetree/bindings/pci/loongson.yaml

@@ -24,7 +24,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: CFG0 standard config space register
       - description: CFG1 extended config space register

Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml

@@ -70,7 +70,6 @@ properties:
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: phy
       - const: mac

Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml

@@ -26,14 +26,12 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: PCIe host controller
       - description: builtin MSI controller
 
   interrupt-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: pcie
       - const: msi

Documentation/devicetree/bindings/perf/arm,cmn.yaml

@@ -21,7 +21,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 4
     items:
       - description: Overflow interrupt for DTC0
       - description: Overflow interrupt for DTC1

Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml

@@ -28,7 +28,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: usbh
       - const: usb_ref

Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml

@@ -22,7 +22,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 6
     items:
       - description: the base CTRL register
       - description: XHCI EC register
@@ -33,7 +32,6 @@ properties:
 
   reg-names:
     minItems: 1
-    maxItems: 6
     items:
       - const: ctrl
       - const: xhci_ec
@@ -51,7 +49,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: sw_usb
       - const: sw_usb3

Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml

@@ -35,7 +35,6 @@ properties:
 
   reg-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: phy
       - const: phy-ctrl

Documentation/devicetree/bindings/phy/mediatek,tphy.yaml

@@ -131,7 +131,6 @@ patternProperties:
 
       clocks:
         minItems: 1
-        maxItems: 2
         items:
           - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
           - description: Reference clock of analog phy
@@ -141,7 +140,6 @@ patternProperties:
 
       clock-names:
         minItems: 1
-        maxItems: 2
         items:
           - const: ref
           - const: da_ref

Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml

@@ -31,14 +31,12 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: Sierra PHY reset.
       - description: Sierra APB reset. This is optional.
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: sierra_reset
       - const: sierra_apb

Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml

@@ -52,28 +52,24 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: Offset of the Torrent PHY configuration registers.
       - description: Offset of the DPTX PHY configuration registers.
 
   reg-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: torrent_phy
       - const: dptx_phy
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: Torrent PHY reset.
       - description: Torrent APB reset. This is optional.
 
   reset-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: torrent_reset
       - const: torrent_apb

Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml

@@ -30,7 +30,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: ref
       - const: xo

Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml

@@ -30,7 +30,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: ref
       - const: xo

Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml

@@ -49,7 +49,6 @@ properties:
 
   reg:
     minItems: 1
-    maxItems: 2
     items:
       - description: Address and length of PHY's common serdes block.
       - description: Address and length of PHY's DP_COM control block.

Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml

@@ -36,7 +36,6 @@ properties:
 
   clocks:
     minItems: 2
-    maxItems: 3
     items:
       - description: phy config clock
       - description: 19.2 MHz ref clk
@@ -44,7 +43,6 @@ properties:
 
   clock-names:
     minItems: 2
-    maxItems: 3
     items:
       - const: cfg_ahb
       - const: ref

Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml

@@ -39,7 +39,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: fck
       - const: usb_x1
@@ -61,7 +60,6 @@ properties:
 
   resets:
     minItems: 1
-    maxItems: 2
     items:
       - description: reset of USB 2.0 host side
       - description: reset of USB 2.0 peripheral side

Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml

@@ -33,7 +33,6 @@ properties:
     # If you want to use the ssc, the clock-frequency of usb_extal
     # must not be 0.
     minItems: 2
-    maxItems: 3
     items:
       - const: usb3-if # The funcional clock
       - const: usb3s_clk # The usb3's external clock

Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml

@@ -26,7 +26,6 @@ properties:
       - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
       - description: PAD Drive Capacity Select
     minItems: 1
-    maxItems: 4
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml

@@ -37,7 +37,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: vpu
       - const: vapb

Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml

@@ -37,7 +37,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Module Clock
       - description: Bus Clock

Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml

@@ -72,7 +72,6 @@ properties:
             - from local to remote, where ACK from the remote means that communnication
               as been stopped on the remote side.
     minItems: 1
-    maxItems: 4
 
   mbox-names:
     items:
@@ -81,7 +80,6 @@ properties:
       - const: shutdown
       - const: detach
     minItems: 1
-    maxItems: 4
 
   memory-region:
     description:

Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml

@@ -116,7 +116,6 @@ properties:
       list, in the specified order, each representing the corresponding
       internal RAM memory region.
     minItems: 1
-    maxItems: 3
     items:
       - const: l2ram
       - const: l1pram

Documentation/devicetree/bindings/reset/fsl,imx-src.yaml

@@ -59,7 +59,6 @@ properties:
       - description: SRC interrupt
       - description: CPU WDOG interrupts out of SRC
     minItems: 1
-    maxItems: 2
 
   '#reset-cells':
     const: 1

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -56,7 +56,6 @@ properties:
 
   interrupts:
     minItems: 3
-    maxItems: 4
     items:
       - description: DirError interrupt
       - description: DataError interrupt

Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml

@@ -32,7 +32,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: RTC Alarm 0
       - description: RTC Alarm 1

Documentation/devicetree/bindings/rtc/imxdi-rtc.yaml

@@ -21,7 +21,6 @@ properties:
       - description: rtc alarm interrupt
       - description: dryice security violation interrupt
     minItems: 1
-    maxItems: 2
 
   clocks:
     maxItems: 1

Documentation/devicetree/bindings/serial/fsl-lpuart.yaml

@@ -36,14 +36,12 @@ properties:
       - description: ipg clock
       - description: baud clock
     minItems: 1
-    maxItems: 2
 
   clock-names:
     items:
       - const: ipg
       - const: baud
     minItems: 1
-    maxItems: 2
 
   dmas:
     items:

Documentation/devicetree/bindings/serial/samsung_uart.yaml

@@ -44,7 +44,6 @@ properties:
   clock-names:
     description: N = 0 is allowed for SoCs without internal baud clock mux.
     minItems: 2
-    maxItems: 5
     items:
       - const: uart
       - pattern: '^clk_uart_baud[0-3]$'

Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml

@@ -164,7 +164,6 @@ patternProperties:
 
       interrupts:
         minItems: 1
-        maxItems: 2
         items:
           - description: UART core irq
           - description: Wakeup irq (RX GPIO)

Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml

@@ -100,7 +100,6 @@ patternProperties:
     properties:
       reg:
         minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM.
-        maxItems: 3
         items:
           - description: Address and size of the Data RAM0.
           - description: Address and size of the Data RAM1.
@@ -111,7 +110,6 @@ patternProperties:
 
       reg-names:
         minItems: 2
-        maxItems: 3
         items:
           - const: dram0
           - const: dram1

Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml

@@ -28,7 +28,6 @@ properties:
     minItems: 2
 
   clock-names:
-    minItems: 2
     items:
       - const: pll_a
       - const: plla_out0

Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml

@@ -34,7 +34,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: I2S bit clock
       - description:
@@ -48,7 +47,6 @@ properties:
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: i2s
       - const: sync_input

Documentation/devicetree/bindings/sound/st,stm32-sai.yaml

@@ -26,7 +26,6 @@ properties:
       - description: Base address and size of SAI common register set.
       - description: Base address and size of SAI identification register set.
     minItems: 1
-    maxItems: 2
 
   ranges:
     maxItems: 1
@@ -81,14 +80,12 @@ patternProperties:
           - description: sai_ck clock feeding the internal clock generator.
           - description: MCLK clock from a SAI set as master clock provider.
         minItems: 1
-        maxItems: 2
 
       clock-names:
         items:
           - const: sai_ck
           - const: MCLK
         minItems: 1
-        maxItems: 2
 
       dmas:
         maxItems: 1

Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml

@@ -35,7 +35,6 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: controller register bus clock
       - description: baud rate generator and delay control clock

Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml

@@ -56,7 +56,6 @@ properties:
 
   reg-names:
     minItems: 1
-    maxItems: 5
     items:
       - const: mspi
       - const: bspi
@@ -71,7 +70,6 @@ properties:
   interrupt-names:
     oneOf:
       - minItems: 1
-        maxItems: 7
         items:
           - const: mspi_done
           - const: mspi_halted

Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml

@@ -23,14 +23,12 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
     items:
       - description: Bus Clock
       - description: Module Clock
 
   clock-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: bus
       - const: mod

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

@@ -77,7 +77,6 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
-    maxItems: 2
     items:
       - const: calib
       - enum:

Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml

@@ -24,7 +24,6 @@ properties:
 
   interrupts:
     minItems: 2
-    maxItems: 4
     items:
       - description: Timer 0 Interrupt
       - description: Timer 1 Interrupt

Documentation/devicetree/bindings/timer/arm,arch_timer.yaml

@@ -35,7 +35,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 5
     items:
       - description: secure timer irq
       - description: non-secure timer irq

Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml

@@ -71,14 +71,12 @@ patternProperties:
 
       interrupts:
         minItems: 1
-        maxItems: 2
         items:
           - description: physical timer irq
           - description: virtual timer irq
 
       reg:
         minItems: 1
-        maxItems: 2
         items:
           - description: 1st view base address
           - description: 2nd optional view base address

Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml

@@ -22,7 +22,6 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 2
     items:
       - description: Timer 1 interrupt
       - description: Timer 2 interrupt

Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml

@@ -30,14 +30,12 @@ properties:
       - description: usb irq from max3420
       - description: vbus detection irq
     minItems: 1
-    maxItems: 2
 
   interrupt-names:
     items:
       - const: udc
       - const: vbus
     minItems: 1
-    maxItems: 2
 
   spi-max-frequency:
     maximum: 26000000