Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (118 commits)
  [netdrvr] skge: build fix
  [PATCH] NetXen: driver cleanup, removed unnecessary __iomem type casts
  [PATCH] PHY: Add support for configuring the PHY connection interface
  [PATCH] chelesio: transmit locking (plus bug fix).
  [PATCH] chelsio: statistics improvement
  [PATCH] chelsio: add MSI support
  [PATCH] chelsio: use standard CRC routines
  [PATCH] chelsio: cleanup pm3393 code
  [PATCH] chelsio: add 1G swcixw aupport
  [PATCH] chelsio: add support for other 10G boards
  [PATCH] chelsio: remove unused mutex
  [PATCH] chelsio: use kzalloc
  [PATCH] chelsio: whitespace fixes
  [PATCH] amd8111e use standard CRC lib
  [PATCH] sky2: msi enhancements.
  [PATCH] sky2: kfree_skb_any needed
  [PATCH] sky2: fixes for Yukon EC_U chip revisions
  [PATCH] sky2: add Dlink 560SX id
  [PATCH] sky2: receive error handling fix
  [PATCH] skge: don't clear MC state on link down
  ...

Documentation/networking/phy.txt

 
 -------
 PHY Abstraction Layer
-(Updated 2005-07-21)
+(Updated 2006-11-30)
 
 Purpose
 
@@ -97,11 +97,12 @@ Letting the PHY Abstraction Layer do Everything
  
  Next, you need to know the device name of the PHY connected to this device. 
  The name will look something like, "phy0:0", where the first number is the
- bus id, and the second is the PHY's address on that bus.
+ bus id, and the second is the PHY's address on that bus.  Typically,
+ the bus is responsible for making its ID unique.
  
  Now, to connect, just call this function:
  
-   phydev = phy_connect(dev, phy_name, &adjust_link, flags);
+   phydev = phy_connect(dev, phy_name, &adjust_link, flags, interface);
 
  phydev is a pointer to the phy_device structure which represents the PHY.  If
  phy_connect is successful, it will return the pointer.  dev, here, is the
@@ -115,6 +116,10 @@ Letting the PHY Abstraction Layer do Everything
  This is useful if the system has put hardware restrictions on
  the PHY/controller, of which the PHY needs to be aware.
 
+ interface is a u32 which specifies the connection type used
+ between the controller and the PHY.  Examples are GMII, MII,
+ RGMII, and SGMII.  For a full list, see include/linux/phy.h
+
  Now just make sure that phydev->supported and phydev->advertising have any
  values pruned from them which don't make sense for your controller (a 10/100
  controller may be connected to a gigabit capable PHY, so you would need to
@@ -191,7 +196,7 @@ Doing it all yourself
    start, or disables then frees them for stop.
 
  struct phy_device * phy_attach(struct net_device *dev, const char *phy_id,
-		 u32 flags);
+		 u32 flags, phy_interface_t interface);
 
    Attaches a network device to a particular PHY, binding the PHY to a generic
    driver if none was found during bus initialization.  Passes in

MAINTAINERS

@@ -432,6 +432,13 @@ L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
+ATMEL MACB ETHERNET DRIVER
+P:	Atmel AVR32 Support Team
+M:	avr32@atmel.com
+P:	Haavard Skinnemoen
+M:	hskinnemoen@atmel.com
+S:	Supported
+
 ATMEL WIRELESS DRIVER
 P:	Simon Kelley
 M:	simon@thekelleys.org.uk
@@ -2132,6 +2139,13 @@ L:	netdev@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
 
+NETXEN (1/10) GbE SUPPORT
+P:	Amit S. Kale
+M:	amitkale@netxen.com
+L:	netdev@vger.kernel.org
+W:	http://www.netxen.com
+S:	Supported
+
 IPVS
 P:	Wensong Zhang
 M:	wensong@linux-vs.org

drivers/net/8390.h

@@ -107,35 +107,14 @@ struct ei_device {
  *      - removed AMIGA_PCMCIA from this list, handled as ISA io now
  */
 
-#if defined(CONFIG_MAC) ||  \
-    defined(CONFIG_ZORRO8390) || defined(CONFIG_ZORRO8390_MODULE) || \
-    defined(CONFIG_HYDRA) || defined(CONFIG_HYDRA_MODULE)
-#define EI_SHIFT(x)	(ei_local->reg_offset[x])
-#undef inb
-#undef inb_p
-#undef outb
-#undef outb_p
-
-#define inb(port)   in_8(port)
-#define outb(val,port)  out_8(port,val)
-#define inb_p(port)   in_8(port)
-#define outb_p(val,port)  out_8(port,val)
-
-#elif defined(CONFIG_ARM_ETHERH) || defined(CONFIG_ARM_ETHERH_MODULE)
-#define EI_SHIFT(x)	(ei_local->reg_offset[x])
-#undef inb
-#undef inb_p
-#undef outb
-#undef outb_p
-
-#define inb(_p)		readb(_p)
-#define outb(_v,_p)	writeb(_v,_p)
-#define inb_p(_p)	inb(_p)
-#define outb_p(_v,_p)	outb(_v,_p)
-
-#elif defined(CONFIG_NE_H8300) || defined(CONFIG_NE_H8300_MODULE)
-#define EI_SHIFT(x)	(ei_local->reg_offset[x])
-#else
+#ifndef ei_inb
+#define ei_inb(_p)	inb(_p)
+#define ei_outb(_v,_p)	outb(_v,_p)
+#define ei_inb_p(_p)	inb_p(_p)
+#define ei_outb_p(_v,_p) outb_p(_v,_p)
+#endif
+
+#ifndef EI_SHIFT
 #define EI_SHIFT(x)	(x)
 #endif
 

drivers/net/Kconfig

@@ -188,6 +188,17 @@ config MII
 	  or internal device.  It is safe to say Y or M here even if your
 	  ethernet card lack MII.
 
+config MACB
+	tristate "Atmel MACB support"
+	depends on NET_ETHERNET && AVR32
+	select MII
+	help
+	  The Atmel MACB ethernet interface is found on many AT32 and AT91
+	  parts. Say Y to include support for the MACB chip.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called macb.
+
 source "drivers/net/arm/Kconfig"
 
 config MACE
@@ -2251,6 +2262,14 @@ config SPIDER_NET
 	  This driver supports the Gigabit Ethernet chips present on the
 	  Cell Processor-Based Blades from IBM.
 
+config TSI108_ETH
+	   tristate "Tundra TSI108 gigabit Ethernet support"
+	   depends on TSI108_BRIDGE
+	   help
+	     This driver supports Tundra TSI108 gigabit Ethernet ports.
+	     To compile this driver as a module, choose M here: the module
+	     will be called tsi108_eth.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on 85xx || 83xx || PPC_86xx
@@ -2341,10 +2360,11 @@ menu "Ethernet (10000 Mbit)"
 config CHELSIO_T1
         tristate "Chelsio 10Gb Ethernet support"
         depends on PCI
+	select CRC32
         help
-          This driver supports Chelsio N110 and N210 models 10Gb Ethernet
-          cards. More information about adapter features and performance
-          tuning is in <file:Documentation/networking/cxgb.txt>.
+          This driver supports Chelsio gigabit and 10-gigabit
+          Ethernet cards. More information about adapter features and
+	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
 
           For general information about Chelsio and our products, visit
           our website at <http://www.chelsio.com>.
@@ -2357,6 +2377,13 @@ config CHELSIO_T1
           To compile this driver as a module, choose M here: the module
           will be called cxgb.
 
+config CHELSIO_T1_1G
+        bool "Chelsio gigabit Ethernet support"
+        depends on CHELSIO_T1
+        help
+          Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+          are using only 10G cards say 'N' here.
+
 config EHEA
 	tristate "eHEA Ethernet support"
 	depends on IBMEBUS
@@ -2447,6 +2474,12 @@ config MYRI10GE
 	  <file:Documentation/networking/net-modules.txt>.  The module
 	  will be called myri10ge.
 
+config NETXEN_NIC
+	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+	depends on PCI
+	help
+	  This enables the support for NetXen's Gigabit Ethernet card.
+
 endmenu
 
 source "drivers/net/tokenring/Kconfig"

drivers/net/Makefile

@@ -82,7 +82,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
 obj-$(CONFIG_SEEQ8005) += seeq8005.o
 obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
+obj-$(CONFIG_MAC8390) += mac8390.o
 obj-$(CONFIG_APNE) += apne.o 8390.o
 obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
 obj-$(CONFIG_SHAPER) += shaper.o
@@ -90,7 +90,6 @@ obj-$(CONFIG_HP100) += hp100.o
 obj-$(CONFIG_SMC9194) += smc9194.o
 obj-$(CONFIG_FEC) += fec.o
 obj-$(CONFIG_68360_ENET) += 68360enet.o
-obj-$(CONFIG_ARM_ETHERH) += 8390.o
 obj-$(CONFIG_WD80x3) += wd.o 8390.o
 obj-$(CONFIG_EL2) += 3c503.o 8390.o
 obj-$(CONFIG_NE2000) += ne.o 8390.o
@@ -107,8 +106,9 @@ obj-$(CONFIG_NE3210) += ne3210.o 8390.o
 obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
 obj-$(CONFIG_B44) += b44.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+obj-$(CONFIG_NE_H8300) += ne-h8300.o
 
+obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
 obj-$(CONFIG_QLA3XXX) += qla3xxx.o
 
@@ -165,7 +165,7 @@ obj-$(CONFIG_BVME6000_NET) += 82596.o
 obj-$(CONFIG_LP486E) += lp486e.o
 
 obj-$(CONFIG_ETH16I) += eth16i.o
-obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
+obj-$(CONFIG_ZORRO8390) += zorro8390.o
 obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
 obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
 obj-$(CONFIG_EQUALIZER) += eql.o
@@ -178,7 +178,7 @@ obj-$(CONFIG_ATARILANCE) += atarilance.o
 obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
 obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
 obj-$(CONFIG_A2065) += a2065.o
-obj-$(CONFIG_HYDRA) += hydra.o 8390.o
+obj-$(CONFIG_HYDRA) += hydra.o
 obj-$(CONFIG_ARIADNE) += ariadne.o
 obj-$(CONFIG_CS89x0) += cs89x0.o
 obj-$(CONFIG_MACSONIC) += macsonic.o
@@ -197,6 +197,8 @@ obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
 
+obj-$(CONFIG_MACB) += macb.o
+
 obj-$(CONFIG_ARM) += arm/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
 obj-$(CONFIG_TR) += tokenring/
@@ -214,3 +216,4 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
 
 obj-$(CONFIG_FS_ENET) += fs_enet/
 
+obj-$(CONFIG_NETXEN_NIC) += netxen/

drivers/net/amd8111e.c

@@ -1490,32 +1490,7 @@ static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
 	buf[12] = readl(mmio + STAT0);
 }
 
-/*
-amd8111e crc generator implementation is different from the kernel
-ether_crc() function.
-*/
-static int amd8111e_ether_crc(int len, char* mac_addr)
-{
-	int i,byte;
-	unsigned char octet;
-	u32 crc= INITCRC;
-
-	for(byte=0; byte < len; byte++){
-		octet = mac_addr[byte];
-		for( i=0;i < 8; i++){
-			/*If the next bit form the input stream is 1,subtract				 the divisor (CRC32) from the dividend(crc).*/
-			if( (octet & 0x1) ^ (crc & 0x1) ){
-				crc >>= 1;
-				crc ^= CRC32;
-			}
-			else
-				crc >>= 1;
 
-			octet >>= 1;
-		}
-	}
-	return crc;
-}
 /*
 This function sets promiscuos mode, all-multi mode or the multicast address
 list to the device.
@@ -1556,7 +1531,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
 	mc_filter[1] = mc_filter[0] = 0;
 	for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
 		     i++, mc_ptr = mc_ptr->next) {
-		bit_num = ( amd8111e_ether_crc(ETH_ALEN,mc_ptr->dmi_addr)							 >> 26 ) & 0x3f;
+		bit_num = (ether_crc_le(ETH_ALEN, mc_ptr->dmi_addr) >> 26) & 0x3f;
 		mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
 	}
 	amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);

drivers/net/amd8111e.h

@@ -651,10 +651,6 @@ typedef enum {
 /* driver ioctl parameters */
 #define AMD8111E_REG_DUMP_LEN	 13*sizeof(u32)
 
-/* crc generator constants */
-#define CRC32 0xedb88320
-#define INITCRC 0xFFFFFFFF
-
 /* amd8111e desriptor format */
 
 struct amd8111e_tx_dr{

drivers/net/arm/etherh.c

@@ -52,7 +52,12 @@
 #include <asm/ecard.h>
 #include <asm/io.h>
 
-#include "../8390.h"
+#define EI_SHIFT(x)	(ei_local->reg_offset[x])
+
+#define ei_inb(_p)	 readb((void __iomem *)_p)
+#define ei_outb(_v,_p)	 writeb(_v,(void __iomem *)_p)
+#define ei_inb_p(_p)	 readb((void __iomem *)_p)
+#define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p)
 
 #define NET_DEBUG  0
 #define DEBUG_INIT 2
@@ -60,6 +65,11 @@
 #define DRV_NAME	"etherh"
 #define DRV_VERSION	"1.11"
 
+static char version[] __initdata =
+	"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
+
+#include "../lib8390.c"
+
 static unsigned int net_debug = NET_DEBUG;
 
 struct etherh_priv {
@@ -87,9 +97,6 @@ MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("EtherH/EtherM driver");
 MODULE_LICENSE("GPL");
 
-static char version[] __initdata =
-	"EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
-
 #define ETHERH500_DATAPORT	0x800	/* MEMC */
 #define ETHERH500_NS8390	0x000	/* MEMC */
 #define ETHERH500_CTRLPORT	0x800	/* IOC  */
@@ -177,7 +184,7 @@ etherh_setif(struct net_device *dev)
 	switch (etherh_priv(dev)->id) {
 	case PROD_I3_ETHERLAN600:
 	case PROD_I3_ETHERLAN600A:
-		addr = (void *)dev->base_addr + EN0_RCNTHI;
+		addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
 
 		switch (dev->if_port) {
 		case IF_PORT_10BASE2:
@@ -218,7 +225,7 @@ etherh_getifstat(struct net_device *dev)
 	switch (etherh_priv(dev)->id) {
 	case PROD_I3_ETHERLAN600:
 	case PROD_I3_ETHERLAN600A:
-		addr = (void *)dev->base_addr + EN0_RCNTHI;
+		addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
 		switch (dev->if_port) {
 		case IF_PORT_10BASE2:
 			stat = 1;
@@ -281,7 +288,7 @@ static void
 etherh_reset(struct net_device *dev)
 {
 	struct ei_device *ei_local = netdev_priv(dev);
-	void __iomem *addr = (void *)dev->base_addr;
+	void __iomem *addr = (void __iomem *)dev->base_addr;
 
 	writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
 
@@ -327,7 +334,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf
 
 	ei_local->dmaing = 1;
 
-	addr = (void *)dev->base_addr;
+	addr = (void __iomem *)dev->base_addr;
 	dma_base = etherh_priv(dev)->dma_base;
 
 	count = (count + 1) & ~1;
@@ -360,7 +367,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf
 			printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
 				dev->name);
 			etherh_reset (dev);
-			NS8390_init (dev, 1);
+			__NS8390_init (dev, 1);
 			break;
 		}
 
@@ -387,7 +394,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int
 
 	ei_local->dmaing = 1;
 
-	addr = (void *)dev->base_addr;
+	addr = (void __iomem *)dev->base_addr;
 	dma_base = etherh_priv(dev)->dma_base;
 
 	buf = skb->data;
@@ -427,7 +434,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p
 
 	ei_local->dmaing = 1;
 
-	addr = (void *)dev->base_addr;
+	addr = (void __iomem *)dev->base_addr;
 	dma_base = etherh_priv(dev)->dma_base;
 
 	writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
@@ -465,7 +472,7 @@ etherh_open(struct net_device *dev)
 		return -EINVAL;
 	}
 
-	if (request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))
+	if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev))
 		return -EAGAIN;
 
 	/*
@@ -491,7 +498,7 @@ etherh_open(struct net_device *dev)
 		etherh_setif(dev);
 
 	etherh_reset(dev);
-	ei_open(dev);
+	__ei_open(dev);
 
 	return 0;
 }
@@ -502,7 +509,7 @@ etherh_open(struct net_device *dev)
 static int
 etherh_close(struct net_device *dev)
 {
-	ei_close (dev);
+	__ei_close (dev);
 	free_irq (dev->irq, dev);
 	return 0;
 }
@@ -650,7 +657,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 	if (ret)
 		goto out;
 
-	dev = __alloc_ei_netdev(sizeof(struct etherh_priv));
+	dev = ____alloc_ei_netdev(sizeof(struct etherh_priv));
 	if (!dev) {
 		ret = -ENOMEM;
 		goto release;
@@ -736,7 +743,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 	ei_local->interface_num = 0;
 
 	etherh_reset(dev);
-	NS8390_init(dev, 0);
+	__NS8390_init(dev, 0);
 
 	ret = register_netdev(dev);
 	if (ret)

drivers/net/au1000_eth.c

@@ -360,7 +360,8 @@ static int mii_probe (struct net_device *dev)
 	BUG_ON(!phydev);
 	BUG_ON(phydev->attached_dev);
 
-	phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0);
+	phydev = phy_connect(dev, phydev->dev.bus_id, &au1000_adjust_link, 0,
+			PHY_INTERFACE_MODE_MII);
 
 	if (IS_ERR(phydev)) {
 		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);

drivers/net/chelsio/Makefile

 #
-# Chelsio 10Gb NIC driver for Linux.
+# Chelsio T1 driver
 #
 
 obj-$(CONFIG_CHELSIO_T1) += cxgb.o
 
-EXTRA_CFLAGS += -Idrivers/net/chelsio $(DEBUG_FLAGS)
+cxgb-$(CONFIG_CHELSIO_T1_1G) += ixf1010.o mac.o mv88e1xxx.o vsc7326.o vsc8244.o
+cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o \
+	     mv88x201x.o my3126.o $(cxgb-y)
 
 
-cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o
-

drivers/net/chelsio/common.h

@@ -45,6 +45,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/ethtool.h>
+#include <linux/if_vlan.h>
 #include <linux/mii.h>
 #include <linux/crc32.h>
 #include <linux/init.h>
@@ -53,13 +54,30 @@
 
 #define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver"
 #define DRV_NAME "cxgb"
-#define DRV_VERSION "2.1.1"
+#define DRV_VERSION "2.2"
 #define PFX      DRV_NAME ": "
 
 #define CH_ERR(fmt, ...)   printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
 #define CH_WARN(fmt, ...)  printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
 #define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
 
+/*
+ * More powerful macro that selectively prints messages based on msg_enable.
+ * For info and debugging messages.
+ */
+#define CH_MSG(adapter, level, category, fmt, ...) do { \
+	if ((adapter)->msg_enable & NETIF_MSG_##category) \
+		printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \
+		       ## __VA_ARGS__); \
+} while (0)
+
+#ifdef DEBUG
+# define CH_DBG(adapter, category, fmt, ...) \
+	CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__)
+#else
+# define CH_DBG(fmt, ...)
+#endif
+
 #define CH_DEVICE(devid, ssid, idx) \
 	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
 
@@ -71,10 +89,6 @@
 
 typedef struct adapter adapter_t;
 
-void t1_elmer0_ext_intr(adapter_t *adapter);
-void t1_link_changed(adapter_t *adapter, int port_id, int link_status,
-			int speed, int duplex, int fc);
-
 struct t1_rx_mode {
 	struct net_device *dev;
 	u32 idx;
@@ -97,26 +111,53 @@ static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
 }
 
 #define	MAX_NPORTS 4
+#define PORT_MASK ((1 << MAX_NPORTS) - 1)
+#define NMTUS      8
+#define TCB_SIZE   128
 
 #define SPEED_INVALID 0xffff
 #define DUPLEX_INVALID 0xff
 
 enum {
 	CHBT_BOARD_N110,
-	CHBT_BOARD_N210
+	CHBT_BOARD_N210,
+	CHBT_BOARD_7500,
+	CHBT_BOARD_8000,
+	CHBT_BOARD_CHT101,
+	CHBT_BOARD_CHT110,
+	CHBT_BOARD_CHT210,
+	CHBT_BOARD_CHT204,
+	CHBT_BOARD_CHT204V,
+	CHBT_BOARD_CHT204E,
+	CHBT_BOARD_CHN204,
+	CHBT_BOARD_COUGAR,
+	CHBT_BOARD_6800,
+	CHBT_BOARD_SIMUL,
 };
 
 enum {
+	CHBT_TERM_FPGA,
 	CHBT_TERM_T1,
-	CHBT_TERM_T2
+	CHBT_TERM_T2,
+	CHBT_TERM_T3
 };
 
 enum {
+	CHBT_MAC_CHELSIO_A,
+	CHBT_MAC_IXF1010,
 	CHBT_MAC_PM3393,
+	CHBT_MAC_VSC7321,
+	CHBT_MAC_DUMMY
 };
 
 enum {
+	CHBT_PHY_88E1041,
+	CHBT_PHY_88E1111,
 	CHBT_PHY_88X2010,
+	CHBT_PHY_XPAK,
+	CHBT_PHY_MY3126,
+	CHBT_PHY_8244,
+	CHBT_PHY_DUMMY
 };
 
 enum {
@@ -150,16 +191,44 @@ struct chelsio_pci_params {
 	unsigned char  is_pcix;
 };
 
+struct tp_params {
+	unsigned int pm_size;
+	unsigned int cm_size;
+	unsigned int pm_rx_base;
+	unsigned int pm_tx_base;
+	unsigned int pm_rx_pg_size;
+	unsigned int pm_tx_pg_size;
+	unsigned int pm_rx_num_pgs;
+	unsigned int pm_tx_num_pgs;
+	unsigned int rx_coalescing_size;
+	unsigned int use_5tuple_mode;
+};
+
+struct mc5_params {
+	unsigned int mode;       /* selects MC5 width */
+	unsigned int nservers;   /* size of server region */
+	unsigned int nroutes;    /* size of routing region */
+};
+
+/* Default MC5 region sizes */
+#define DEFAULT_SERVER_REGION_LEN 256
+#define DEFAULT_RT_REGION_LEN 1024
+
 struct adapter_params {
 	struct sge_params sge;
+	struct mc5_params mc5;
+	struct tp_params  tp;
 	struct chelsio_pci_params pci;
 
 	const struct board_info *brd_info;
 
+	unsigned short mtus[NMTUS];
 	unsigned int   nports;          /* # of ethernet ports */
 	unsigned int   stats_update_period;
 	unsigned short chip_revision;
 	unsigned char  chip_version;
+	unsigned char  is_asic;
+	unsigned char  has_msi;
 };
 
 struct link_config {
@@ -207,17 +276,20 @@ struct adapter {
 	/* Terminator modules. */
 	struct sge    *sge;
 	struct peespi *espi;
+	struct petp   *tp;
 
 	struct port_info port[MAX_NPORTS];
 	struct work_struct stats_update_task;
 	struct timer_list stats_update_timer;
 
-	struct semaphore mib_mutex;
 	spinlock_t tpi_lock;
 	spinlock_t work_lock;
+	spinlock_t mac_lock;
+
 	/* guards async operations */
 	spinlock_t async_lock ____cacheline_aligned;
 	u32 slow_intr_mask;
+	int t1powersave;
 };
 
 enum {                                           /* adapter flags */
@@ -256,6 +328,11 @@ struct board_info {
 	const char             *desc;
 };
 
+static inline int t1_is_asic(const adapter_t *adapter)
+{
+	return adapter->params.is_asic;
+}
+
 extern struct pci_device_id t1_pci_tbl[];
 
 static inline int adapter_matches_type(const adapter_t *adapter,
@@ -285,13 +362,15 @@ static inline unsigned int core_ticks_per_usec(const adapter_t *adap)
 	return board_info(adap)->clock_core / 1000000;
 }
 
+extern int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp);
+extern int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
 extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
 extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value);
 
 extern void t1_interrupts_enable(adapter_t *adapter);
 extern void t1_interrupts_disable(adapter_t *adapter);
 extern void t1_interrupts_clear(adapter_t *adapter);
-extern int elmer0_ext_intr_handler(adapter_t *adapter);
+extern int t1_elmer0_ext_intr_handler(adapter_t *adapter);
 extern int t1_slow_intr_handler(adapter_t *adapter);
 
 extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
@@ -305,9 +384,7 @@ extern int t1_init_hw_modules(adapter_t *adapter);
 extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi);
 extern void t1_free_sw_modules(adapter_t *adapter);
 extern void t1_fatal_err(adapter_t *adapter);
-
-extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable);
-extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable);
-extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable);
-
+extern void t1_link_changed(adapter_t *adapter, int port_id);
+extern void t1_link_negotiated(adapter_t *adapter, int port_id, int link_stat,
+			    int speed, int duplex, int pause);
 #endif /* _CXGB_COMMON_H_ */

drivers/net/chelsio/cphy.h

@@ -52,7 +52,14 @@ struct mdio_ops {
 /* PHY interrupt types */
 enum {
 	cphy_cause_link_change = 0x1,
-	cphy_cause_error = 0x2
+	cphy_cause_error = 0x2,
+	cphy_cause_fifo_error = 0x3
+};
+
+enum {
+	PHY_LINK_UP = 0x1,
+	PHY_AUTONEG_RDY = 0x2,
+	PHY_AUTONEG_EN = 0x4
 };
 
 struct cphy;
@@ -81,7 +88,18 @@ struct cphy_ops {
 /* A PHY instance */
 struct cphy {
 	int addr;                            /* PHY address */
+	int state;	/* Link status state machine */
 	adapter_t *adapter;                  /* associated adapter */
+
+	struct work_struct phy_update;
+
+	u16 bmsr;
+	int count;
+	int act_count;
+	int act_on;
+
+	u32 elmer_gpo;
+
 	struct cphy_ops *ops;                /* PHY operations */
 	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
 			 int reg_addr, unsigned int *val);
@@ -142,6 +160,10 @@ struct gphy {
 	int (*reset)(adapter_t *adapter);
 };
 
+extern struct gphy t1_my3126_ops;
+extern struct gphy t1_mv88e1xxx_ops;
+extern struct gphy t1_vsc8244_ops;
+extern struct gphy t1_xpak_ops;
 extern struct gphy t1_mv88x201x_ops;
 extern struct gphy t1_dummy_phy_ops;
 

drivers/net/chelsio/cpl5_cmd.h

@@ -46,24 +46,385 @@
 #endif
 
 enum CPL_opcode {
+	CPL_PASS_OPEN_REQ     = 0x1,
+	CPL_PASS_OPEN_RPL     = 0x2,
+	CPL_PASS_ESTABLISH    = 0x3,
+	CPL_PASS_ACCEPT_REQ   = 0xE,
+	CPL_PASS_ACCEPT_RPL   = 0x4,
+	CPL_ACT_OPEN_REQ      = 0x5,
+	CPL_ACT_OPEN_RPL      = 0x6,
+	CPL_CLOSE_CON_REQ     = 0x7,
+	CPL_CLOSE_CON_RPL     = 0x8,
+	CPL_CLOSE_LISTSRV_REQ = 0x9,
+	CPL_CLOSE_LISTSRV_RPL = 0xA,
+	CPL_ABORT_REQ         = 0xB,
+	CPL_ABORT_RPL         = 0xC,
+	CPL_PEER_CLOSE        = 0xD,
+	CPL_ACT_ESTABLISH     = 0x17,
+
+	CPL_GET_TCB           = 0x24,
+	CPL_GET_TCB_RPL       = 0x25,
+	CPL_SET_TCB           = 0x26,
+	CPL_SET_TCB_FIELD     = 0x27,
+	CPL_SET_TCB_RPL       = 0x28,
+	CPL_PCMD              = 0x29,
+
+	CPL_PCMD_READ         = 0x31,
+	CPL_PCMD_READ_RPL     = 0x32,
+
+
+	CPL_RX_DATA           = 0xA0,
+	CPL_RX_DATA_DDP       = 0xA1,
+	CPL_RX_DATA_ACK       = 0xA3,
 	CPL_RX_PKT            = 0xAD,
+	CPL_RX_ISCSI_HDR      = 0xAF,
+	CPL_TX_DATA_ACK       = 0xB0,
+	CPL_TX_DATA           = 0xB1,
 	CPL_TX_PKT            = 0xB2,
 	CPL_TX_PKT_LSO        = 0xB6,
+
+	CPL_RTE_DELETE_REQ    = 0xC0,
+	CPL_RTE_DELETE_RPL    = 0xC1,
+	CPL_RTE_WRITE_REQ     = 0xC2,
+	CPL_RTE_WRITE_RPL     = 0xD3,
+	CPL_RTE_READ_REQ      = 0xC3,
+	CPL_RTE_READ_RPL      = 0xC4,
+	CPL_L2T_WRITE_REQ     = 0xC5,
+	CPL_L2T_WRITE_RPL     = 0xD4,
+	CPL_L2T_READ_REQ      = 0xC6,
+	CPL_L2T_READ_RPL      = 0xC7,
+	CPL_SMT_WRITE_REQ     = 0xC8,
+	CPL_SMT_WRITE_RPL     = 0xD5,
+	CPL_SMT_READ_REQ      = 0xC9,
+	CPL_SMT_READ_RPL      = 0xCA,
+	CPL_ARP_MISS_REQ      = 0xCD,
+	CPL_ARP_MISS_RPL      = 0xCE,
+	CPL_MIGRATE_C2T_REQ   = 0xDC,
+	CPL_MIGRATE_C2T_RPL   = 0xDD,
+	CPL_ERROR             = 0xD7,
+
+    /* internal: driver -> TOM */
+	CPL_MSS_CHANGE        = 0xE1
 };
 
-enum {                /* TX_PKT_LSO ethernet types */
+#define NUM_CPL_CMDS 256
+
+enum CPL_error {
+	CPL_ERR_NONE               = 0,
+	CPL_ERR_TCAM_PARITY        = 1,
+	CPL_ERR_TCAM_FULL          = 3,
+	CPL_ERR_CONN_RESET         = 20,
+	CPL_ERR_CONN_EXIST         = 22,
+	CPL_ERR_ARP_MISS           = 23,
+	CPL_ERR_BAD_SYN            = 24,
+	CPL_ERR_CONN_TIMEDOUT      = 30,
+	CPL_ERR_XMIT_TIMEDOUT      = 31,
+	CPL_ERR_PERSIST_TIMEDOUT   = 32,
+	CPL_ERR_FINWAIT2_TIMEDOUT  = 33,
+	CPL_ERR_KEEPALIVE_TIMEDOUT = 34,
+	CPL_ERR_ABORT_FAILED       = 42,
+	CPL_ERR_GENERAL            = 99
+};
+
+enum {
+	CPL_CONN_POLICY_AUTO = 0,
+	CPL_CONN_POLICY_ASK  = 1,
+	CPL_CONN_POLICY_DENY = 3
+};
+
+enum {
+	ULP_MODE_NONE   = 0,
+	ULP_MODE_TCPDDP = 1,
+	ULP_MODE_ISCSI  = 2,
+	ULP_MODE_IWARP  = 3,
+	ULP_MODE_SSL    = 4
+};
+
+enum {
+	CPL_PASS_OPEN_ACCEPT,
+	CPL_PASS_OPEN_REJECT
+};
+
+enum {
+	CPL_ABORT_SEND_RST = 0,
+	CPL_ABORT_NO_RST,
+	CPL_ABORT_POST_CLOSE_REQ = 2
+};
+
+enum {                // TX_PKT_LSO ethernet types
 	CPL_ETH_II,
 	CPL_ETH_II_VLAN,
 	CPL_ETH_802_3,
 	CPL_ETH_802_3_VLAN
 };
 
-struct cpl_rx_data {
+union opcode_tid {
+    u32 opcode_tid;
+    u8 opcode;
+};
+
+#define S_OPCODE 24
+#define V_OPCODE(x) ((x) << S_OPCODE)
+#define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF)
+#define G_TID(x)    ((x) & 0xFFFFFF)
+
+/* tid is assumed to be 24-bits */
+#define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid))
+
+#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid)
+
+/* extract the TID from a CPL command */
+#define GET_TID(cmd) (G_TID(ntohl(OPCODE_TID(cmd))))
+
+struct tcp_options {
+	u16 mss;
+	u8 wsf;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd:4;
+	u8 ecn:1;
+	u8 sack:1;
+	u8 tstamp:1;
+#else
+	u8 tstamp:1;
+	u8 sack:1;
+	u8 ecn:1;
+	u8 rsvd:4;
+#endif
+};
+
+struct cpl_pass_open_req {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 opt0h;
+	u32 opt0l;
+	u32 peer_netmask;
+	u32 opt1;
+};
+
+struct cpl_pass_open_rpl {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u8 resvd[7];
+	u8 status;
+};
+
+struct cpl_pass_establish {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 tos_tid;
+	u8  l2t_idx;
+	u8  rsvd[3];
+	u32 snd_isn;
+	u32 rcv_isn;
+};
+
+struct cpl_pass_accept_req {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 tos_tid;
+    struct tcp_options tcp_options;
+	u8  dst_mac[6];
+	u16 vlan_tag;
+	u8  src_mac[6];
+	u8  rsvd[2];
+	u32 rcv_isn;
+	u32 unknown_tcp_options;
+};
+
+struct cpl_pass_accept_rpl {
+	union opcode_tid ot;
+	u32 rsvd0;
+	u32 rsvd1;
+	u32 peer_ip;
+	u32 opt0h;
+	union {
+	u32 opt0l;
+	struct {
+	    u8 rsvd[3];
+	    u8 status;
+	};
+    };
+};
+
+struct cpl_act_open_req {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 opt0h;
+	u32 opt0l;
+	u32 iff_vlantag;
+	u32 rsvd;
+};
+
+struct cpl_act_open_rpl {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 new_tid;
+	u8  rsvd[3];
+	u8  status;
+};
+
+struct cpl_act_establish {
+	union opcode_tid ot;
+	u16 local_port;
+	u16 peer_port;
+	u32 local_ip;
+	u32 peer_ip;
+	u32 tos_tid;
+	u32 rsvd;
+	u32 snd_isn;
+	u32 rcv_isn;
+};
+
+struct cpl_get_tcb {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_get_tcb_rpl {
+	union opcode_tid ot;
+	u16 len;
+	u8 rsvd;
+	u8 status;
+};
+
+struct cpl_set_tcb {
+	union opcode_tid ot;
+	u16 len;
+	u16 rsvd;
+};
+
+struct cpl_set_tcb_field {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 offset;
+	u32 mask;
+	u32 val;
+};
+
+struct cpl_set_tcb_rpl {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 status;
+};
+
+struct cpl_pcmd {
+	union opcode_tid ot;
+	u16 dlen_in;
+	u16 dlen_out;
+	u32 pcmd_parm[2];
+};
+
+struct cpl_pcmd_read {
+	union opcode_tid ot;
+	u32 rsvd1;
+	u16 rsvd2;
+	u32 addr;
+	u16 len;
+};
+
+struct cpl_pcmd_read_rpl {
+	union opcode_tid ot;
+	u16 len;
+};
+
+struct cpl_close_con_req {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_close_con_rpl {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 status;
+	u32 snd_nxt;
+	u32 rcv_nxt;
+};
+
+struct cpl_close_listserv_req {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_close_listserv_rpl {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 status;
+};
+
+struct cpl_abort_req {
+	union opcode_tid ot;
 	u32 rsvd0;
+	u8  rsvd1;
+	u8  cmd;
+	u8  rsvd2[6];
+};
+
+struct cpl_abort_rpl {
+	union opcode_tid ot;
+	u32 rsvd0;
+	u8  rsvd1;
+	u8  status;
+	u8  rsvd2[6];
+};
+
+struct cpl_peer_close {
+	union opcode_tid ot;
+	u32 rsvd;
+};
+
+struct cpl_tx_data {
+	union opcode_tid ot;
+	u32 len;
+	u32 rsvd0;
+	u16 urg;
+	u16 flags;
+};
+
+struct cpl_tx_data_ack {
+	union opcode_tid ot;
+	u32 ack_seq;
+};
+
+struct cpl_rx_data {
+	union opcode_tid ot;
 	u32 len;
 	u32 seq;
 	u16 urg;
-	u8  rsvd1;
+	u8  rsvd;
+	u8  status;
+};
+
+struct cpl_rx_data_ack {
+	union opcode_tid ot;
+	u32 credit;
+};
+
+struct cpl_rx_data_ddp {
+	union opcode_tid ot;
+	u32 len;
+	u32 seq;
+	u32 nxt_seq;
+	u32 ulp_crc;
+	u16 ddp_status;
+	u8  rsvd;
 	u8  status;
 };
 
@@ -99,9 +460,9 @@ struct cpl_tx_pkt_lso {
 	u8 ip_csum_dis:1;
 	u8 l4_csum_dis:1;
 	u8 vlan_valid:1;
-	u8 rsvd:1;
+	u8 :1;
 #else
-	u8 rsvd:1;
+	u8 :1;
 	u8 vlan_valid:1;
 	u8 l4_csum_dis:1;
 	u8 ip_csum_dis:1;
@@ -110,8 +471,7 @@ struct cpl_tx_pkt_lso {
 	u16 vlan;
 	__be32 len;
 
-	u32 rsvd2;
-	u8 rsvd3;
+	u8 rsvd[5];
 #if defined(__LITTLE_ENDIAN_BITFIELD)
 	u8 tcp_hdr_words:4;
 	u8 ip_hdr_words:4;
@@ -138,8 +498,142 @@ struct cpl_rx_pkt {
 	u8 iff:4;
 #endif
 	u16 csum;
-	__be16 vlan;
+	u16 vlan;
 	u16 len;
 };
 
+struct cpl_l2t_write_req {
+	union opcode_tid ot;
+	u32 params;
+	u8 rsvd1[2];
+	u8 dst_mac[6];
+};
+
+struct cpl_l2t_write_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_l2t_read_req {
+	union opcode_tid ot;
+	u8 rsvd[3];
+	u8 l2t_idx;
+};
+
+struct cpl_l2t_read_rpl {
+	union opcode_tid ot;
+	u32 params;
+	u8 rsvd1[2];
+	u8 dst_mac[6];
+};
+
+struct cpl_smt_write_req {
+	union opcode_tid ot;
+	u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:1;
+	u8 mtu_idx:3;
+	u8 iff:4;
+#else
+	u8 iff:4;
+	u8 mtu_idx:3;
+	u8 rsvd1:1;
+#endif
+	u16 rsvd2;
+	u16 rsvd3;
+	u8  src_mac1[6];
+	u16 rsvd4;
+	u8  src_mac0[6];
+};
+
+struct cpl_smt_write_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_smt_read_req {
+	union opcode_tid ot;
+	u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:4;
+	u8 iff:4;
+#else
+	u8 iff:4;
+	u8 rsvd1:4;
+#endif
+	u16 rsvd2;
+};
+
+struct cpl_smt_read_rpl {
+	union opcode_tid ot;
+	u8 status;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:1;
+	u8 mtu_idx:3;
+	u8 rsvd0:4;
+#else
+	u8 rsvd0:4;
+	u8 mtu_idx:3;
+	u8 rsvd1:1;
+#endif
+	u16 rsvd2;
+	u16 rsvd3;
+	u8  src_mac1[6];
+	u16 rsvd4;
+	u8  src_mac0[6];
+};
+
+struct cpl_rte_delete_req {
+	union opcode_tid ot;
+	u32 params;
+};
+
+struct cpl_rte_delete_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_rte_write_req {
+	union opcode_tid ot;
+	u32 params;
+	u32 netmask;
+	u32 faddr;
+};
+
+struct cpl_rte_write_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd[3];
+};
+
+struct cpl_rte_read_req {
+	union opcode_tid ot;
+	u32 params;
+};
+
+struct cpl_rte_read_rpl {
+	union opcode_tid ot;
+	u8 status;
+	u8 rsvd0[2];
+	u8 l2t_idx;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 rsvd1:7;
+	u8 select:1;
+#else
+	u8 select:1;
+	u8 rsvd1:7;
+#endif
+	u8 rsvd2[3];
+	u32 addr;
+};
+
+struct cpl_mss_change {
+	union opcode_tid ot;
+	u32 mss;
+};
+
 #endif /* _CXGB_CPL5_CMD_H_ */
+

drivers/net/chelsio/elmer0.h

@@ -39,6 +39,12 @@
 #ifndef _CXGB_ELMER0_H_
 #define _CXGB_ELMER0_H_
 
+/* ELMER0 flavors */
+enum {
+	ELMER0_XC2S300E_6FT256_C,
+	ELMER0_XC2S100E_6TQ144_C
+};
+
 /* ELMER0 registers */
 #define A_ELMER0_VERSION 0x100000
 #define A_ELMER0_PHY_CFG 0x100004
@@ -149,3 +155,4 @@
 #define MI1_OP_INDIRECT_READ     3
 
 #endif /* _CXGB_ELMER0_H_ */
+

drivers/net/chelsio/espi.c

@@ -81,46 +81,36 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
 	return busy;
 }
 
-/* 1. Deassert rx_reset_core. */
-/* 2. Program TRICN_CNFG registers. */
-/* 3. Deassert rx_reset_link */
 static int tricn_init(adapter_t *adapter)
 {
-	int     i               = 0;
-	int     stat            = 0;
-	int     timeout         = 0;
-	int     is_ready        = 0;
+	int i, sme = 1;
 
-	/* 1 */
-	timeout=1000;
-	do {
-		stat = readl(adapter->regs + A_ESPI_RX_RESET);
-		is_ready = (stat & 0x4);
-		timeout--;
-		udelay(5);
-	} while (!is_ready || (timeout==0));
-	writel(0x2, adapter->regs + A_ESPI_RX_RESET);
-	if (timeout==0)
-	{
-		CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
-		t1_fatal_err(adapter);
+	if (!(readl(adapter->regs + A_ESPI_RX_RESET)  & F_RX_CLK_STATUS)) {
+		CH_ERR("%s: ESPI clock not ready\n", adapter->name);
+		return -1;
 	}
 
-	/* 2 */
-	tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
-	tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
-	tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
-	for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
-	for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
-	for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
-	for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-	for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
-	for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-	for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80);
-	for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-
-	/* 3 */
-	writel(0x3, adapter->regs + A_ESPI_RX_RESET);
+	writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET);
+
+	if (sme) {
+		tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
+		tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
+		tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
+	}
+	for (i = 1; i <= 8; i++)
+		tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
+	for (i = 1; i <= 2; i++)
+		tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
+	for (i = 1; i <= 3; i++)
+		tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+	tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1);
+	tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1);
+	tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1);
+	tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80);
+	tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1);
+
+	writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST,
+	       adapter->regs + A_ESPI_RX_RESET);
 
 	return 0;
 }
@@ -143,6 +133,7 @@ void t1_espi_intr_enable(struct peespi *espi)
 
 void t1_espi_intr_clear(struct peespi *espi)
 {
+	readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
 	writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
 	writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
 }
@@ -157,7 +148,6 @@ void t1_espi_intr_disable(struct peespi *espi)
 
 int t1_espi_intr_handler(struct peespi *espi)
 {
-	u32 cnt;
 	u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
 
 	if (status & F_DIP4ERR)
@@ -177,7 +167,7 @@ int t1_espi_intr_handler(struct peespi *espi)
 		 * Must read the error count to clear the interrupt
 		 * that it causes.
 		 */
-		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+		readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
 	}
 
 	/*
@@ -192,7 +182,7 @@ int t1_espi_intr_handler(struct peespi *espi)
 
 const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
 {
-    return &espi->intr_cnt;
+	return &espi->intr_cnt;
 }
 
 static void espi_setup_for_pm3393(adapter_t *adapter)
@@ -210,17 +200,45 @@ static void espi_setup_for_pm3393(adapter_t *adapter)
 	writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
 }
 
-/* T2 Init part --  */
-/* 1. Set T_ESPI_MISCCTRL_ADDR */
-/* 2. Init ESPI registers. */
-/* 3. Init TriCN Hard Macro */
-int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+static void espi_setup_for_vsc7321(adapter_t *adapter)
+{
+        writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+        writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+        writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+	writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+	writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+	writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+	writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG);
+
+	writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+}
+
+/*
+ * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
+ */
+static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
 {
-	u32 cnt;
+	writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+	if (nports == 4) {
+		if (is_T2(adapter)) {
+			writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+			writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+		} else {
+			writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+			writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+		}
+	} else {
+		writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+		writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+	}
+	writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG);
 
+}
+
+int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+{
 	u32 status_enable_extra = 0;
 	adapter_t *adapter = espi->adapter;
-	u32 status, burstval = 0x800100;
 
 	/* Disable ESPI training.  MACs that can handle it enable it below. */
 	writel(0, adapter->regs + A_ESPI_TRAIN);
@@ -229,38 +247,20 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 		writel(V_OUT_OF_SYNC_COUNT(4) |
 		       V_DIP2_PARITY_ERR_THRES(3) |
 		       V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
-		if (nports == 4) {
-			/* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
-			burstval = 0x200040;
-		}
-	}
-	writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+        	writel(nports == 4 ? 0x200040 : 0x1000080,
+		       adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+	} else
+        	writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
 
-	switch (mac_type) {
-	case CHBT_MAC_PM3393:
+	if (mac_type == CHBT_MAC_PM3393)
 		espi_setup_for_pm3393(adapter);
-		break;
-	default:
+	else if (mac_type == CHBT_MAC_VSC7321)
+		espi_setup_for_vsc7321(adapter);
+	else if (mac_type == CHBT_MAC_IXF1010) {
+		status_enable_extra = F_INTEL1010MODE;
+		espi_setup_for_ixf1010(adapter, nports);
+	} else
 		return -1;
-	}
-
-	/*
-	 * Make sure any pending interrupts from the SPI are
-	 * Cleared before enabling the interrupt.
-	 */
-	writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
-	status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
-	if (status & F_DIP2PARITYERR) {
-		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
-	}
-
-	/*
-	 * For T1B we need to write 1 to clear ESPI interrupts.  For T2+ we
-	 * write the status as is.
-	 */
-	if (status && t1_is_T1B(espi->adapter))
-		status = 1;
-	writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
 
 	writel(status_enable_extra | F_RXSTATUSENABLE,
 	       adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
@@ -271,9 +271,11 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
 		 * Always position the control at the 1st port egress IN
 		 * (sop,eop) counter to reduce PIOs for T/N210 workaround.
 		 */
-		espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
-				   & ~MON_MASK) | (F_MONITORED_DIRECTION
-				   | F_MONITORED_INTERFACE);
+		espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL);
+		espi->misc_ctrl &= ~MON_MASK;
+		espi->misc_ctrl |= F_MONITORED_DIRECTION;
+		if (adapter->params.nports == 1)
+			espi->misc_ctrl |= F_MONITORED_INTERFACE;
 		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
 		spin_lock_init(&espi->lock);
 	}
@@ -299,8 +301,7 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
 {
 	struct peespi *espi = adapter->espi;
 
-	if (!is_T2(adapter))
-		return;
+	if (!is_T2(adapter)) return;
 	spin_lock(&espi->lock);
 	espi->misc_ctrl = (val & ~MON_MASK) |
 			  (espi->misc_ctrl & MON_MASK);
@@ -310,27 +311,61 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
 
 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
 {
-	u32 sel;
-
 	struct peespi *espi = adapter->espi;
+	u32 sel;
 
 	if (!is_T2(adapter))
 		return 0;
+
 	sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
 	if (!wait) {
 		if (!spin_trylock(&espi->lock))
 			return 0;
-	}
-	else
+	} else
 		spin_lock(&espi->lock);
+
 	if ((sel != (espi->misc_ctrl & MON_MASK))) {
 		writel(((espi->misc_ctrl & ~MON_MASK) | sel),
 		       adapter->regs + A_ESPI_MISC_CONTROL);
 		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
 		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
-	}
-	else
+	} else
 		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
 	spin_unlock(&espi->lock);
 	return sel;
 }
+
+/*
+ * This function is for T204 only.
+ * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
+ * one shot, since there is no per port counter on the out side.
+ */
+int
+t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
+{
+        struct peespi *espi = adapter->espi;
+	u8 i, nport = (u8)adapter->params.nports;
+
+        if (!wait) {
+                if (!spin_trylock(&espi->lock))
+                        return -1;
+        } else
+                spin_lock(&espi->lock);
+
+	if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) {
+		espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
+					F_MONITORED_DIRECTION;
+                writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ 	}
+	for (i = 0 ; i < nport; i++, valp++) {
+		if (i) {
+			writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
+			       adapter->regs + A_ESPI_MISC_CONTROL);
+		}
+                *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+        }
+
+        writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+        spin_unlock(&espi->lock);
+        return 0;
+}

drivers/net/chelsio/espi.h

@@ -64,5 +64,6 @@ const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi);
 
 void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val);
 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait);
+int t1_espi_get_mon_t204(adapter_t *, u32 *, u8);
 
 #endif /* _CXGB_ESPI_H_ */

drivers/net/chelsio/fpga_defs.h

+/* $Date: 2005/03/07 23:59:05 $ $RCSfile: fpga_defs.h,v $ $Revision: 1.4 $ */
+
+/*
+ * FPGA specific definitions
+ */
+
+#ifndef __CHELSIO_FPGA_DEFS_H__
+#define __CHELSIO_FPGA_DEFS_H__
+
+#define FPGA_PCIX_ADDR_VERSION               0xA08
+#define FPGA_PCIX_ADDR_STAT                  0xA0C
+
+/* FPGA master interrupt Cause/Enable bits */
+#define FPGA_PCIX_INTERRUPT_SGE_ERROR        0x1
+#define FPGA_PCIX_INTERRUPT_SGE_DATA         0x2
+#define FPGA_PCIX_INTERRUPT_TP               0x4
+#define FPGA_PCIX_INTERRUPT_MC3              0x8
+#define FPGA_PCIX_INTERRUPT_GMAC             0x10
+#define FPGA_PCIX_INTERRUPT_PCIX             0x20
+
+/* TP interrupt register addresses */
+#define FPGA_TP_ADDR_INTERRUPT_ENABLE        0xA10
+#define FPGA_TP_ADDR_INTERRUPT_CAUSE         0xA14
+#define FPGA_TP_ADDR_VERSION                 0xA18
+
+/* TP interrupt Cause/Enable bits */
+#define FPGA_TP_INTERRUPT_MC4                0x1
+#define FPGA_TP_INTERRUPT_MC5                0x2
+
+/*
+ * PM interrupt register addresses
+ */
+#define FPGA_MC3_REG_INTRENABLE              0xA20
+#define FPGA_MC3_REG_INTRCAUSE               0xA24
+#define FPGA_MC3_REG_VERSION                 0xA28
+
+/*
+ * GMAC interrupt register addresses
+ */
+#define FPGA_GMAC_ADDR_INTERRUPT_ENABLE      0xA30
+#define FPGA_GMAC_ADDR_INTERRUPT_CAUSE       0xA34
+#define FPGA_GMAC_ADDR_VERSION               0xA38
+
+/* GMAC Cause/Enable bits */
+#define FPGA_GMAC_INTERRUPT_PORT0            0x1
+#define FPGA_GMAC_INTERRUPT_PORT1            0x2
+#define FPGA_GMAC_INTERRUPT_PORT2            0x4
+#define FPGA_GMAC_INTERRUPT_PORT3            0x8
+
+/* MI0 registers */
+#define A_MI0_CLK 0xb00
+
+#define S_MI0_CLK_DIV    0
+#define M_MI0_CLK_DIV    0xff
+#define V_MI0_CLK_DIV(x) ((x) << S_MI0_CLK_DIV)
+#define G_MI0_CLK_DIV(x) (((x) >> S_MI0_CLK_DIV) & M_MI0_CLK_DIV)
+
+#define S_MI0_CLK_CNT    8
+#define M_MI0_CLK_CNT    0xff
+#define V_MI0_CLK_CNT(x) ((x) << S_MI0_CLK_CNT)
+#define G_MI0_CLK_CNT(x) (((x) >> S_MI0_CLK_CNT) & M_MI0_CLK_CNT)
+
+#define A_MI0_CSR 0xb04
+
+#define S_MI0_CSR_POLL    0
+#define V_MI0_CSR_POLL(x) ((x) << S_MI0_CSR_POLL)
+#define F_MI0_CSR_POLL    V_MI0_CSR_POLL(1U)
+
+#define S_MI0_PREAMBLE    1
+#define V_MI0_PREAMBLE(x) ((x) << S_MI0_PREAMBLE)
+#define F_MI0_PREAMBLE    V_MI0_PREAMBLE(1U)
+
+#define S_MI0_INTR_ENABLE    2
+#define V_MI0_INTR_ENABLE(x) ((x) << S_MI0_INTR_ENABLE)
+#define F_MI0_INTR_ENABLE    V_MI0_INTR_ENABLE(1U)
+
+#define S_MI0_BUSY    3
+#define V_MI0_BUSY(x) ((x) << S_MI0_BUSY)
+#define F_MI0_BUSY    V_MI0_BUSY(1U)
+
+#define S_MI0_MDIO    4
+#define V_MI0_MDIO(x) ((x) << S_MI0_MDIO)
+#define F_MI0_MDIO    V_MI0_MDIO(1U)
+
+#define A_MI0_ADDR 0xb08
+
+#define S_MI0_PHY_REG_ADDR    0
+#define M_MI0_PHY_REG_ADDR    0x1f
+#define V_MI0_PHY_REG_ADDR(x) ((x) << S_MI0_PHY_REG_ADDR)
+#define G_MI0_PHY_REG_ADDR(x) (((x) >> S_MI0_PHY_REG_ADDR) & M_MI0_PHY_REG_ADDR)
+
+#define S_MI0_PHY_ADDR    5
+#define M_MI0_PHY_ADDR    0x1f
+#define V_MI0_PHY_ADDR(x) ((x) << S_MI0_PHY_ADDR)
+#define G_MI0_PHY_ADDR(x) (((x) >> S_MI0_PHY_ADDR) & M_MI0_PHY_ADDR)
+
+#define A_MI0_DATA_EXT 0xb0c
+#define A_MI0_DATA_INT 0xb10
+
+/* GMAC registers */
+#define A_GMAC_MACID_LO 0x28
+#define A_GMAC_MACID_HI 0x2c
+#define A_GMAC_CSR 0x30
+
+#define S_INTERFACE    0
+#define M_INTERFACE    0x3
+#define V_INTERFACE(x) ((x) << S_INTERFACE)
+#define G_INTERFACE(x) (((x) >> S_INTERFACE) & M_INTERFACE)
+
+#define S_MAC_TX_ENABLE    2
+#define V_MAC_TX_ENABLE(x) ((x) << S_MAC_TX_ENABLE)
+#define F_MAC_TX_ENABLE    V_MAC_TX_ENABLE(1U)
+
+#define S_MAC_RX_ENABLE    3
+#define V_MAC_RX_ENABLE(x) ((x) << S_MAC_RX_ENABLE)
+#define F_MAC_RX_ENABLE    V_MAC_RX_ENABLE(1U)
+
+#define S_MAC_LB_ENABLE    4
+#define V_MAC_LB_ENABLE(x) ((x) << S_MAC_LB_ENABLE)
+#define F_MAC_LB_ENABLE    V_MAC_LB_ENABLE(1U)
+
+#define S_MAC_SPEED    5
+#define M_MAC_SPEED    0x3
+#define V_MAC_SPEED(x) ((x) << S_MAC_SPEED)
+#define G_MAC_SPEED(x) (((x) >> S_MAC_SPEED) & M_MAC_SPEED)
+
+#define S_MAC_HD_FC_ENABLE    7
+#define V_MAC_HD_FC_ENABLE(x) ((x) << S_MAC_HD_FC_ENABLE)
+#define F_MAC_HD_FC_ENABLE    V_MAC_HD_FC_ENABLE(1U)
+
+#define S_MAC_HALF_DUPLEX    8
+#define V_MAC_HALF_DUPLEX(x) ((x) << S_MAC_HALF_DUPLEX)
+#define F_MAC_HALF_DUPLEX    V_MAC_HALF_DUPLEX(1U)
+
+#define S_MAC_PROMISC    9
+#define V_MAC_PROMISC(x) ((x) << S_MAC_PROMISC)
+#define F_MAC_PROMISC    V_MAC_PROMISC(1U)
+
+#define S_MAC_MC_ENABLE    10
+#define V_MAC_MC_ENABLE(x) ((x) << S_MAC_MC_ENABLE)
+#define F_MAC_MC_ENABLE    V_MAC_MC_ENABLE(1U)
+
+#define S_MAC_RESET    11
+#define V_MAC_RESET(x) ((x) << S_MAC_RESET)
+#define F_MAC_RESET    V_MAC_RESET(1U)
+
+#define S_MAC_RX_PAUSE_ENABLE    12
+#define V_MAC_RX_PAUSE_ENABLE(x) ((x) << S_MAC_RX_PAUSE_ENABLE)
+#define F_MAC_RX_PAUSE_ENABLE    V_MAC_RX_PAUSE_ENABLE(1U)
+
+#define S_MAC_TX_PAUSE_ENABLE    13
+#define V_MAC_TX_PAUSE_ENABLE(x) ((x) << S_MAC_TX_PAUSE_ENABLE)
+#define F_MAC_TX_PAUSE_ENABLE    V_MAC_TX_PAUSE_ENABLE(1U)
+
+#define S_MAC_LWM_ENABLE    14
+#define V_MAC_LWM_ENABLE(x) ((x) << S_MAC_LWM_ENABLE)
+#define F_MAC_LWM_ENABLE    V_MAC_LWM_ENABLE(1U)
+
+#define S_MAC_MAGIC_PKT_ENABLE    15
+#define V_MAC_MAGIC_PKT_ENABLE(x) ((x) << S_MAC_MAGIC_PKT_ENABLE)
+#define F_MAC_MAGIC_PKT_ENABLE    V_MAC_MAGIC_PKT_ENABLE(1U)
+
+#define S_MAC_ISL_ENABLE    16
+#define V_MAC_ISL_ENABLE(x) ((x) << S_MAC_ISL_ENABLE)
+#define F_MAC_ISL_ENABLE    V_MAC_ISL_ENABLE(1U)
+
+#define S_MAC_JUMBO_ENABLE    17
+#define V_MAC_JUMBO_ENABLE(x) ((x) << S_MAC_JUMBO_ENABLE)
+#define F_MAC_JUMBO_ENABLE    V_MAC_JUMBO_ENABLE(1U)
+
+#define S_MAC_RX_PAD_ENABLE    18
+#define V_MAC_RX_PAD_ENABLE(x) ((x) << S_MAC_RX_PAD_ENABLE)
+#define F_MAC_RX_PAD_ENABLE    V_MAC_RX_PAD_ENABLE(1U)
+
+#define S_MAC_RX_CRC_ENABLE    19
+#define V_MAC_RX_CRC_ENABLE(x) ((x) << S_MAC_RX_CRC_ENABLE)
+#define F_MAC_RX_CRC_ENABLE    V_MAC_RX_CRC_ENABLE(1U)
+
+#define A_GMAC_IFS 0x34
+
+#define S_MAC_IFS2    0
+#define M_MAC_IFS2    0x3f
+#define V_MAC_IFS2(x) ((x) << S_MAC_IFS2)
+#define G_MAC_IFS2(x) (((x) >> S_MAC_IFS2) & M_MAC_IFS2)
+
+#define S_MAC_IFS1    8
+#define M_MAC_IFS1    0x7f
+#define V_MAC_IFS1(x) ((x) << S_MAC_IFS1)
+#define G_MAC_IFS1(x) (((x) >> S_MAC_IFS1) & M_MAC_IFS1)
+
+#define A_GMAC_JUMBO_FRAME_LEN 0x38
+#define A_GMAC_LNK_DLY 0x3c
+#define A_GMAC_PAUSETIME 0x40
+#define A_GMAC_MCAST_LO 0x44
+#define A_GMAC_MCAST_HI 0x48
+#define A_GMAC_MCAST_MASK_LO 0x4c
+#define A_GMAC_MCAST_MASK_HI 0x50
+#define A_GMAC_RMT_CNT 0x54
+#define A_GMAC_RMT_DATA 0x58
+#define A_GMAC_BACKOFF_SEED 0x5c
+#define A_GMAC_TXF_THRES 0x60
+
+#define S_TXF_READ_THRESHOLD    0
+#define M_TXF_READ_THRESHOLD    0xff
+#define V_TXF_READ_THRESHOLD(x) ((x) << S_TXF_READ_THRESHOLD)
+#define G_TXF_READ_THRESHOLD(x) (((x) >> S_TXF_READ_THRESHOLD) & M_TXF_READ_THRESHOLD)
+
+#define S_TXF_WRITE_THRESHOLD    16
+#define M_TXF_WRITE_THRESHOLD    0xff
+#define V_TXF_WRITE_THRESHOLD(x) ((x) << S_TXF_WRITE_THRESHOLD)
+#define G_TXF_WRITE_THRESHOLD(x) (((x) >> S_TXF_WRITE_THRESHOLD) & M_TXF_WRITE_THRESHOLD)
+
+#define MAC_REG_BASE 0x600
+#define MAC_REG_ADDR(idx, reg) (MAC_REG_BASE + (idx) * 128 + (reg))
+
+#define MAC_REG_IDLO(idx)              MAC_REG_ADDR(idx, A_GMAC_MACID_LO)
+#define MAC_REG_IDHI(idx)              MAC_REG_ADDR(idx, A_GMAC_MACID_HI)
+#define MAC_REG_CSR(idx)               MAC_REG_ADDR(idx, A_GMAC_CSR)
+#define MAC_REG_IFS(idx)               MAC_REG_ADDR(idx, A_GMAC_IFS)
+#define MAC_REG_LARGEFRAMELENGTH(idx) MAC_REG_ADDR(idx, A_GMAC_JUMBO_FRAME_LEN)
+#define MAC_REG_LINKDLY(idx)           MAC_REG_ADDR(idx, A_GMAC_LNK_DLY)
+#define MAC_REG_PAUSETIME(idx)         MAC_REG_ADDR(idx, A_GMAC_PAUSETIME)
+#define MAC_REG_CASTLO(idx)            MAC_REG_ADDR(idx, A_GMAC_MCAST_LO)
+#define MAC_REG_MCASTHI(idx)           MAC_REG_ADDR(idx, A_GMAC_MCAST_HI)
+#define MAC_REG_CASTMASKLO(idx)        MAC_REG_ADDR(idx, A_GMAC_MCAST_MASK_LO)
+#define MAC_REG_MCASTMASKHI(idx)       MAC_REG_ADDR(idx, A_GMAC_MCAST_MASK_HI)
+#define MAC_REG_RMCNT(idx)             MAC_REG_ADDR(idx, A_GMAC_RMT_CNT)
+#define MAC_REG_RMDATA(idx)            MAC_REG_ADDR(idx, A_GMAC_RMT_DATA)
+#define MAC_REG_GMRANDBACKOFFSEED(idx) MAC_REG_ADDR(idx, A_GMAC_BACKOFF_SEED)
+#define MAC_REG_TXFTHRESHOLDS(idx)     MAC_REG_ADDR(idx, A_GMAC_TXF_THRES)
+
+#endif

drivers/net/chelsio/gmac.h

@@ -62,6 +62,8 @@ struct cmac_statistics {
 	u64 TxInternalMACXmitError;
 	u64 TxFramesWithExcessiveDeferral;
 	u64 TxFCSErrors;
+	u64 TxJumboFramesOK;
+	u64 TxJumboOctetsOK;
 
 	/* Receive */
 	u64 RxOctetsOK;
@@ -81,6 +83,8 @@ struct cmac_statistics {
 	u64 RxInRangeLengthErrors;
 	u64 RxOutOfRangeLengthField;
 	u64 RxFrameTooLongErrors;
+	u64 RxJumboFramesOK;
+	u64 RxJumboOctetsOK;
 };
 
 struct cmac_ops {
@@ -128,6 +132,7 @@ struct gmac {
 extern struct gmac t1_pm3393_ops;
 extern struct gmac t1_chelsio_mac_ops;
 extern struct gmac t1_vsc7321_ops;
+extern struct gmac t1_vsc7326_ops;
 extern struct gmac t1_ixf1010_ops;
 extern struct gmac t1_dummy_mac_ops;
 

drivers/net/chelsio/sge.h

@@ -44,6 +44,9 @@
 #include <asm/byteorder.h>
 
 struct sge_intr_counts {
+	unsigned int rx_drops;        /* # of packets dropped due to no mem */
+	unsigned int pure_rsps;        /* # of non-payload responses */
+	unsigned int unhandled_irqs;   /* # of unhandled interrupts */
 	unsigned int respQ_empty;      /* # times respQ empty */
 	unsigned int respQ_overflow;   /* # respQ overflow (fatal) */
 	unsigned int freelistQ_empty;  /* # times freelist empty */
@@ -51,24 +54,16 @@ struct sge_intr_counts {
 	unsigned int pkt_mismatch;
 	unsigned int cmdQ_full[3];     /* not HW IRQ, host cmdQ[] full */
 	unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */
-	unsigned int ethernet_pkts;    /* # of Ethernet packets received */
-	unsigned int offload_pkts;     /* # of offload packets received */
-	unsigned int offload_bundles;  /* # of offload pkt bundles delivered */
-	unsigned int pure_rsps;        /* # of non-payload responses */
-	unsigned int unhandled_irqs;   /* # of unhandled interrupts */
-	unsigned int tx_ipfrags;
-	unsigned int tx_reg_pkts;
-	unsigned int tx_lso_pkts;
-	unsigned int tx_do_cksum;
 };
 
 struct sge_port_stats {
-	unsigned long rx_cso_good;     /* # of successful RX csum offloads */
-	unsigned long tx_cso;          /* # of TX checksum offloads */
-	unsigned long vlan_xtract;     /* # of VLAN tag extractions */
-	unsigned long vlan_insert;     /* # of VLAN tag extractions */
-	unsigned long tso;             /* # of TSO requests */
-	unsigned long rx_drops;        /* # of packets dropped due to no mem */
+	u64 rx_packets;      /* # of Ethernet packets received */
+	u64 rx_cso_good;     /* # of successful RX csum offloads */
+	u64 tx_packets;      /* # of TX packets */
+	u64 tx_cso;          /* # of TX checksum offloads */
+	u64 tx_tso;          /* # of TSO requests */
+	u64 vlan_xtract;     /* # of VLAN tag extractions */
+	u64 vlan_insert;     /* # of VLAN tag insertions */
 };
 
 struct sk_buff;
@@ -90,7 +85,11 @@ int t1_sge_intr_error_handler(struct sge *);
 void t1_sge_intr_enable(struct sge *);
 void t1_sge_intr_disable(struct sge *);
 void t1_sge_intr_clear(struct sge *);
-const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge);
-const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port);
+const struct sge_intr_counts *t1_sge_get_intr_counts(const struct sge *sge);
+void t1_sge_get_port_stats(const struct sge *sge, int port, struct sge_port_stats *);
+void t1_sched_set_max_avail_bytes(struct sge *, unsigned int);
+void t1_sched_set_drain_bits_per_us(struct sge *, unsigned int, unsigned int);
+unsigned int t1_sched_update_parms(struct sge *, unsigned int, unsigned int,
+			   unsigned int);
 
 #endif /* _CXGB_SGE_H_ */

drivers/net/pcmcia/pcnet_cs.c

@@ -1096,7 +1096,6 @@ static void ei_watchdog(u_long arg)
 
     /* Check for pending interrupt with expired latency timer: with
        this, we can limp along even if the interrupt is blocked */
-    outb_p(E8390_NODMA+E8390_PAGE0, nic_base + E8390_CMD);
     if (info->stale++ && (inb_p(nic_base + EN0_ISR) & ENISR_ALL)) {
 	if (!info->fast_poll)
 	    printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);