Commit 9826b113 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Fixes for 4.20:
- Fix for huge page handling that caused a GPUVM fault in some cases
- Fix IH ring setup
- Fix for xgmi aperture setup
- Fix for watermark setup for SMU
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com
parents 7b74026d c1a17777
......@@ -1632,13 +1632,6 @@ static int amdgpu_vm_update_ptes(struct amdgpu_pte_update_params *params,
continue;
}
/* First check if the entry is already handled */
if (cursor.pfn < frag_start) {
cursor.entry->huge = true;
amdgpu_vm_pt_next(adev, &cursor);
continue;
}
/* If it isn't already handled it can't be a huge page */
if (cursor.entry->huge) {
/* Add the entry to the relocated list to update it. */
......@@ -1701,8 +1694,17 @@ static int amdgpu_vm_update_ptes(struct amdgpu_pte_update_params *params,
}
} while (frag_start < entry_end);
if (frag >= shift)
if (amdgpu_vm_pt_descendant(adev, &cursor)) {
/* Mark all child entries as huge */
while (cursor.pfn < frag_start) {
cursor.entry->huge = true;
amdgpu_vm_pt_next(adev, &cursor);
}
} else if (frag >= shift) {
/* or just move on to the next on the same level. */
amdgpu_vm_pt_next(adev, &cursor);
}
}
return 0;
......
......@@ -72,7 +72,7 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
/* Program the system aperture low logical page number. */
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR,
min(adev->gmc.vram_start, adev->gmc.agp_start) >> 18);
min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
if (adev->asic_type == CHIP_RAVEN && adev->rev_id >= 0x8)
/*
......@@ -82,11 +82,11 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
* to get rid of the VM fault and hardware hang.
*/
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
max((adev->gmc.vram_end >> 18) + 0x1,
max((adev->gmc.fb_end >> 18) + 0x1,
adev->gmc.agp_end >> 18));
else
WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
max(adev->gmc.vram_end, adev->gmc.agp_end) >> 18);
max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18);
/* Set default page address. */
value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start
......
......@@ -90,7 +90,7 @@ static void mmhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
/* Program the system aperture low logical page number. */
WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR,
min(adev->gmc.vram_start, adev->gmc.agp_start) >> 18);
min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
if (adev->asic_type == CHIP_RAVEN && adev->rev_id >= 0x8)
/*
......@@ -100,11 +100,11 @@ static void mmhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
* to get rid of the VM fault and hardware hang.
*/
WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
max((adev->gmc.vram_end >> 18) + 0x1,
max((adev->gmc.fb_end >> 18) + 0x1,
adev->gmc.agp_end >> 18));
else
WREG32_SOC15(MMHUB, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
max(adev->gmc.vram_end, adev->gmc.agp_end) >> 18);
max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18);
/* Set default page address. */
value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start +
......
......@@ -129,7 +129,7 @@ static int vega10_ih_irq_init(struct amdgpu_device *adev)
else
wptr_off = adev->wb.gpu_addr + (adev->irq.ih.wptr_offs * 4);
WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_LO, lower_32_bits(wptr_off));
WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_HI, upper_32_bits(wptr_off) & 0xFF);
WREG32_SOC15(OSSSYS, 0, mmIH_RB_WPTR_ADDR_HI, upper_32_bits(wptr_off) & 0xFFFF);
/* set rptr, wptr to 0 */
WREG32_SOC15(OSSSYS, 0, mmIH_RB_RPTR, 0);
......
......@@ -713,20 +713,20 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table,
for (i = 0; i < wm_with_clock_ranges->num_wm_dmif_sets; i++) {
table->WatermarkRow[1][i].MinClock =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_dcfclk_clk_in_khz /
1000));
table->WatermarkRow[1][i].MaxClock =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_dcfclk_clk_in_khz /
1000));
table->WatermarkRow[1][i].MinUclk =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_min_mem_clk_in_khz /
1000));
table->WatermarkRow[1][i].MaxUclk =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_max_mem_clk_in_khz /
1000));
table->WatermarkRow[1][i].WmSetting = (uint8_t)
wm_with_clock_ranges->wm_dmif_clocks_ranges[i].wm_set_id;
}
......@@ -734,20 +734,20 @@ int smu_set_watermarks_for_clocks_ranges(void *wt_table,
for (i = 0; i < wm_with_clock_ranges->num_wm_mcif_sets; i++) {
table->WatermarkRow[0][i].MinClock =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_socclk_clk_in_khz /
1000));
table->WatermarkRow[0][i].MaxClock =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_socclk_clk_in_khz /
1000));
table->WatermarkRow[0][i].MinUclk =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_min_mem_clk_in_khz /
1000));
table->WatermarkRow[0][i].MaxUclk =
cpu_to_le16((uint16_t)
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz) /
1000);
(wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_max_mem_clk_in_khz /
1000));
table->WatermarkRow[0][i].WmSetting = (uint8_t)
wm_with_clock_ranges->wm_mcif_clocks_ranges[i].wm_set_id;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment