Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse()

There are only two types of power pulses 'on' or 'off', pass a boolean
instead of the power pulse 'command'.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/hci_qca.c

@@ -1004,10 +1004,11 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
 		hci_uart_set_baudrate(hu, speed);
 }
 
-static int qca_send_power_pulse(struct hci_uart *hu, u8 cmd)
+static int qca_send_power_pulse(struct hci_uart *hu, bool on)
 {
 	int ret;
 	int timeout = msecs_to_jiffies(POWER_PULSE_TRANS_TIMEOUT_MS);
+	u8 cmd = on ? QCA_WCN3990_POWERON_PULSE : QCA_WCN3990_POWEROFF_PULSE;
 
 	/* These power pulses are single byte command which are sent
 	 * at required baudrate to wcn3990. On wcn3990, we have an external
@@ -1138,12 +1139,12 @@ static int qca_wcn3990_init(struct hci_uart *hu)
 
 	/* Forcefully enable wcn3990 to enter in to boot mode. */
 	host_set_baudrate(hu, 2400);
-	ret = qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
+	ret = qca_send_power_pulse(hu, false);
 	if (ret)
 		return ret;
 
 	qca_set_speed(hu, QCA_INIT_SPEED);
-	ret = qca_send_power_pulse(hu, QCA_WCN3990_POWERON_PULSE);
+	ret = qca_send_power_pulse(hu, true);
 	if (ret)
 		return ret;
 
@@ -1290,7 +1291,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
 	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
 
 	host_set_baudrate(hu, 2400);
-	qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
+	qca_send_power_pulse(hu, false);
 	qca_power_setup(hu, false);
 }