Merge samba.org:/scratch/anton/linux-2.5

into samba.org:/scratch/anton/linux-2.5_bar

arch/i386/kernel/acpi.c

@@ -166,6 +166,7 @@ acpi_parse_lapic_addr_ovr (
 	return 0;
 }
 
+#ifndef CONFIG_ACPI_HT_ONLY
 
 static int __init
 acpi_parse_lapic_nmi (
@@ -185,12 +186,16 @@ acpi_parse_lapic_nmi (
 	return 0;
 }
 
+#endif /*CONFIG_ACPI_HT_ONLY*/
+
 #endif /*CONFIG_X86_LOCAL_APIC*/
 
 #ifdef CONFIG_X86_IO_APIC
 
 int acpi_ioapic;
 
+#ifndef CONFIG_ACPI_HT_ONLY
+
 static int __init
 acpi_parse_ioapic (
 	acpi_table_entry_header *header)
@@ -251,6 +256,7 @@ acpi_parse_nmi_src (
 	return 0;
 }
 
+#endif /*!CONFIG_ACPI_HT_ONLY*/ 
 #endif /*CONFIG_X86_IO_APIC*/
 
 
@@ -361,18 +367,21 @@ acpi_boot_init (
 		return result;
 	}
 
+#ifndef CONFIG_ACPI_HT_ONLY
 	result = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi);
 	if (result < 0) {
 		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
 		return result;
 	}
+#endif /*!CONFIG_ACPI_HT_ONLY*/
 
 	acpi_lapic = 1;
 
 #endif /*CONFIG_X86_LOCAL_APIC*/
 
 #ifdef CONFIG_X86_IO_APIC
+#ifndef CONFIG_ACPI_HT_ONLY
 
 	/* 
 	 * I/O APIC 
@@ -410,6 +419,7 @@ acpi_boot_init (
 
 	acpi_ioapic = 1;
 
+#endif /*!CONFIG_ACPI_HT_ONLY*/
 #endif /*CONFIG_X86_IO_APIC*/
 
 #ifdef CONFIG_X86_LOCAL_APIC

arch/i386/kernel/cpu/mtrr/cyrix.c

@@ -110,12 +110,54 @@ cyrix_get_free_region(unsigned long base, unsigned long size)
 	return -ENOSPC;
 }
 
+static u32 cr4 = 0;
+static u32 ccr3;
+
+static void prepare_set(void)
+{
+	u32 cr0;
+
+	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+	if ( cpu_has_pge ) {
+		cr4 = read_cr4();
+		write_cr4(cr4 & (unsigned char) ~(1 << 7));
+	}
+
+	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
+	    a side-effect  */
+	cr0 = read_cr0() | 0x40000000;
+	wbinvd();
+	write_cr0(cr0);
+	wbinvd();
+
+	/* Cyrix ARRs - everything else were excluded at the top */
+	ccr3 = getCx86(CX86_CCR3);
+
+	/* Cyrix ARRs - everything else were excluded at the top */
+	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+
+}
+
+static void post_set(void)
+{
+	/*  Flush caches and TLBs  */
+	wbinvd();
+
+	/* Cyrix ARRs - everything else was excluded at the top */
+	setCx86(CX86_CCR3, ccr3);
+		
+	/*  Enable caches  */
+	write_cr0(read_cr0() & 0xbfffffff);
+
+	/*  Restore value of CR4  */
+	if ( cpu_has_pge )
+		write_cr4(cr4);
+}
+
 static void cyrix_set_arr(unsigned int reg, unsigned long base,
 			  unsigned long size, mtrr_type type)
 {
 	unsigned char arr, arr_type, arr_size;
-	u32 cr0, ccr3;
-	u32 cr4 = 0;
 
 	arr = CX86_ARR_BASE + (reg << 1) + reg;	/* avoid multiplication by 3 */
 
@@ -158,24 +200,7 @@ static void cyrix_set_arr(unsigned int reg, unsigned long base,
 		}
 	}
 
-	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
-		cr4 = read_cr4();
-		write_cr4(cr4 & (unsigned char) ~(1 << 7));
-	}
-
-	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
-	    a side-effect  */
-	cr0 = read_cr0() | 0x40000000;
-	wbinvd();
-	write_cr0(cr0);
-	wbinvd();
-
-	/* Cyrix ARRs - everything else were excluded at the top */
-	ccr3 = getCx86(CX86_CCR3);
-
-	/* Cyrix ARRs - everything else were excluded at the top */
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+	prepare_set();
 
 	base <<= PAGE_SHIFT;
 	setCx86(arr, ((unsigned char *) &base)[3]);
@@ -183,18 +208,7 @@ static void cyrix_set_arr(unsigned int reg, unsigned long base,
 	setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
 	setCx86(CX86_RCR_BASE + reg, arr_type);
 
-	/*  Flush caches and TLBs  */
-	wbinvd();
-
-	/* Cyrix ARRs - everything else was excluded at the top */
-	setCx86(CX86_CCR3, ccr3);
-		
-	/*  Enable caches  */
-	write_cr0(read_cr0() & 0xbfffffff);
-
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
-		write_cr4(cr4);
+	post_set();
 }
 
 typedef struct {
@@ -210,31 +224,11 @@ arr_state_t arr_state[8] __initdata = {
 
 unsigned char ccr_state[7] __initdata = { 0, 0, 0, 0, 0, 0, 0 };
 
-static void __init
-cyrix_arr_init_secondary(void)
+static void cyrix_set_all(void)
 {
 	int i;
-	u32 cr0, ccr3, cr4 = 0;
-
-	/* flush cache and enable MAPEN */
-	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
-		cr4 = read_cr4();
-		write_cr4(cr4 & (unsigned char) ~(1 << 7));
-	}
 
-	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
-	    a side-effect  */
-	cr0 = read_cr0() | 0x40000000;
-	wbinvd();
-	write_cr0(cr0);
-	wbinvd();
-
-	/* Cyrix ARRs - everything else were excluded at the top */
-	ccr3 = getCx86(CX86_CCR3);
-
-	/* Cyrix ARRs - everything else were excluded at the top */
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+	prepare_set();
 
 	/* the CCRs are not contiguous */
 	for (i = 0; i < 4; i++)
@@ -245,18 +239,7 @@ cyrix_arr_init_secondary(void)
 		cyrix_set_arr(i, arr_state[i].base, 
 			      arr_state[i].size, arr_state[i].type);
 
-	/*  Flush caches and TLBs  */
-	wbinvd();
-
-	/* Cyrix ARRs - everything else was excluded at the top */
-	setCx86(CX86_CCR3, ccr3);
-		
-	/*  Enable caches  */
-	write_cr0(read_cr0() & 0xbfffffff);
-
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
-		write_cr4(cr4);
+	post_set();
 }
 
 /*
@@ -361,7 +344,7 @@ cyrix_arr_init(void)
 static struct mtrr_ops cyrix_mtrr_ops = {
 	.vendor            = X86_VENDOR_CYRIX,
 	.init              = cyrix_arr_init,
-	.init_secondary    = cyrix_arr_init_secondary,
+	.set_all	   = cyrix_set_all,
 	.set               = cyrix_set_arr,
 	.get               = cyrix_get_arr,
 	.get_free_region   = cyrix_get_free_region,

arch/i386/kernel/cpu/mtrr/generic.c

+#include <linux/init.h>
+#include <linux/slab.h>
 #include <linux/mm.h>
 #include <asm/io.h>
 #include <asm/mtrr.h>
@@ -6,6 +8,90 @@
 #include <asm/cpufeature.h>
 #include "mtrr.h"
 
+struct mtrr_state {
+	struct mtrr_var_range *var_ranges;
+	mtrr_type fixed_ranges[NUM_FIXED_RANGES];
+	unsigned char enabled;
+	mtrr_type def_type;
+};
+
+static unsigned long smp_changes_mask __initdata = 0;
+struct mtrr_state mtrr_state = {};
+
+
+/*  Get the MSR pair relating to a var range  */
+static void __init
+get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
+{
+	rdmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+}
+
+static void __init
+get_fixed_ranges(mtrr_type * frs)
+{
+	unsigned long *p = (unsigned long *) frs;
+	int i;
+
+	rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+
+	for (i = 0; i < 2; i++)
+		rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
+	for (i = 0; i < 8; i++)
+		rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
+}
+
+/*  Grab all of the MTRR state for this CPU into *state  */
+void get_mtrr_state(void)
+{
+	unsigned int i;
+	struct mtrr_var_range *vrs;
+	unsigned long lo, dummy;
+
+	if (!mtrr_state.var_ranges) {
+		mtrr_state.var_ranges = kmalloc(num_var_ranges * sizeof (struct mtrr_var_range), 
+						GFP_KERNEL);
+		if (!mtrr_state.var_ranges)
+			return;
+	} 
+	vrs = mtrr_state.var_ranges;
+
+	for (i = 0; i < num_var_ranges; i++)
+		get_mtrr_var_range(i, &vrs[i]);
+	get_fixed_ranges(mtrr_state.fixed_ranges);
+
+	rdmsr(MTRRdefType_MSR, lo, dummy);
+	mtrr_state.def_type = (lo & 0xff);
+	mtrr_state.enabled = (lo & 0xc00) >> 10;
+}
+
+/*  Free resources associated with a struct mtrr_state  */
+void __init finalize_mtrr_state(void)
+{
+	if (mtrr_state.var_ranges)
+		kfree(mtrr_state.var_ranges);
+	mtrr_state.var_ranges = NULL;
+}
+
+/*  Some BIOS's are fucked and don't set all MTRRs the same!  */
+void __init mtrr_state_warn(void)
+{
+	unsigned long mask = smp_changes_mask;
+
+	if (!mask)
+		return;
+	if (mask & MTRR_CHANGE_MASK_FIXED)
+		printk
+		    ("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+	if (mask & MTRR_CHANGE_MASK_VARIABLE)
+		printk
+		    ("mtrr: your CPUs had inconsistent variable MTRR settings\n");
+	if (mask & MTRR_CHANGE_MASK_DEFTYPE)
+		printk
+		    ("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+	printk("mtrr: probably your BIOS does not setup all CPUs\n");
+}
+
 
 int generic_get_free_region(unsigned long base, unsigned long size)
 /*  [SUMMARY] Get a free MTRR.
@@ -55,23 +141,104 @@ void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	*type = base_lo & 0xff;
 }
 
-void generic_set_mtrr(unsigned int reg, unsigned long base,
-		      unsigned long size, mtrr_type type)
-/*  [SUMMARY] Set variable MTRR register on the local CPU.
-    <reg> The register to set.
-    <base> The base address of the region.
-    <size> The size of the region. If this is 0 the region is disabled.
-    <type> The type of the region.
-    <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
-    be done externally.
-    [RETURNS] Nothing.
+static int __init set_fixed_ranges(mtrr_type * frs)
+{
+	unsigned long *p = (unsigned long *) frs;
+	int changed = FALSE;
+	int i;
+	unsigned long lo, hi;
+
+	rdmsr(MTRRfix64K_00000_MSR, lo, hi);
+	if (p[0] != lo || p[1] != hi) {
+		wrmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+		changed = TRUE;
+	}
+
+	for (i = 0; i < 2; i++) {
+		rdmsr(MTRRfix16K_80000_MSR + i, lo, hi);
+		if (p[2 + i * 2] != lo || p[3 + i * 2] != hi) {
+			wrmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2],
+			      p[3 + i * 2]);
+			changed = TRUE;
+		}
+	}
+
+	for (i = 0; i < 8; i++) {
+		rdmsr(MTRRfix4K_C0000_MSR + i, lo, hi);
+		if (p[6 + i * 2] != lo || p[7 + i * 2] != hi) {
+			wrmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2],
+			      p[7 + i * 2]);
+			changed = TRUE;
+		}
+	}
+	return changed;
+}
+
+/*  Set the MSR pair relating to a var range. Returns TRUE if
+    changes are made  */
+static int __init set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
+{
+	unsigned int lo, hi;
+	int changed = FALSE;
+
+	rdmsr(MTRRphysBase_MSR(index), lo, hi);
+	if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
+	    || (vr->base_hi & 0xfUL) != (hi & 0xfUL)) {
+		wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
+		changed = TRUE;
+	}
+
+	rdmsr(MTRRphysMask_MSR(index), lo, hi);
+
+	if ((vr->mask_lo & 0xfffff800UL) != (lo & 0xfffff800UL)
+	    || (vr->mask_hi & 0xfUL) != (hi & 0xfUL)) {
+		wrmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
+		changed = TRUE;
+	}
+	return changed;
+}
+
+static unsigned long set_mtrr_state(u32 deftype_lo, u32 deftype_hi)
+/*  [SUMMARY] Set the MTRR state for this CPU.
+    <state> The MTRR state information to read.
+    <ctxt> Some relevant CPU context.
+    [NOTE] The CPU must already be in a safe state for MTRR changes.
+    [RETURNS] 0 if no changes made, else a mask indication what was changed.
 */
 {
-	u32 cr0, cr4 = 0;
-	u32 deftype_lo, deftype_hi;
-	static spinlock_t set_atomicity_lock = SPIN_LOCK_UNLOCKED;
+	unsigned int i;
+	unsigned long change_mask = 0;
+
+	for (i = 0; i < num_var_ranges; i++)
+		if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
+			change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+
+	if (set_fixed_ranges(mtrr_state.fixed_ranges))
+		change_mask |= MTRR_CHANGE_MASK_FIXED;
+
+	/*  Set_mtrr_restore restores the old value of MTRRdefType,
+	   so to set it we fiddle with the saved value  */
+	if ((deftype_lo & 0xff) != mtrr_state.def_type
+	    || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
+		deftype_lo |= (mtrr_state.def_type | mtrr_state.enabled << 10);
+		change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
+	}
+
+	return change_mask;
+}
+
+
+static u32 cr4 = 0;
+static u32 deftype_lo, deftype_hi;
+
+static void prepare_set(void)
+{
+	u32 cr0;
+
+	/*  Note that this is not ideal, since the cache is only flushed/disabled
+	   for this CPU while the MTRRs are changed, but changing this requires
+	   more invasive changes to the way the kernel boots  */
 
-	spin_lock(&set_atomicity_lock);
 	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
 	if ( cpu_has_pge ) {
 		cr4 = read_cr4();
@@ -90,18 +257,10 @@ void generic_set_mtrr(unsigned int reg, unsigned long base,
 
 	/*  Disable MTRRs, and set the default type to uncached  */
 	wrmsr(MTRRdefType_MSR, deftype_lo & 0xf300UL, deftype_hi);
+}
 
-	if (size == 0) {
-		/* The invalid bit is kept in the mask, so we simply clear the
-		   relevant mask register to disable a range. */
-		wrmsr(MTRRphysMask_MSR(reg), 0, 0);
-	} else {
-		wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type,
-		      (base & size_and_mask) >> (32 - PAGE_SHIFT));
-		wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800,
-		      (-size & size_and_mask) >> (32 - PAGE_SHIFT));
-	}
-
+static void post_set(void)
+{
 	/*  Flush caches and TLBs  */
 	wbinvd();
 
@@ -114,7 +273,57 @@ void generic_set_mtrr(unsigned int reg, unsigned long base,
 	/*  Restore value of CR4  */
 	if ( cpu_has_pge )
 		write_cr4(cr4);
-	spin_unlock(&set_atomicity_lock);
+
+}
+
+static void generic_set_all(void)
+{
+	unsigned long mask, count;
+
+	prepare_set();
+
+	/* Actually set the state */
+	mask = set_mtrr_state(deftype_lo,deftype_hi);
+
+	post_set();
+
+	/*  Use the atomic bitops to update the global mask  */
+	for (count = 0; count < sizeof mask * 8; ++count) {
+		if (mask & 0x01)
+			set_bit(count, &smp_changes_mask);
+		mask >>= 1;
+	}
+	
+}
+
+static void generic_set_mtrr(unsigned int reg, unsigned long base,
+			     unsigned long size, mtrr_type type)
+/*  [SUMMARY] Set variable MTRR register on the local CPU.
+    <reg> The register to set.
+    <base> The base address of the region.
+    <size> The size of the region. If this is 0 the region is disabled.
+    <type> The type of the region.
+    <do_safe> If TRUE, do the change safely. If FALSE, safety measures should
+    be done externally.
+    [RETURNS] Nothing.
+*/
+{
+	prepare_set();
+
+	printk("MTRR: setting reg %x\n",reg);
+
+	if (size == 0) {
+		/* The invalid bit is kept in the mask, so we simply clear the
+		   relevant mask register to disable a range. */
+		wrmsr(MTRRphysMask_MSR(reg), 0, 0);
+	} else {
+		wrmsr(MTRRphysBase_MSR(reg), base << PAGE_SHIFT | type,
+		      (base & size_and_mask) >> (32 - PAGE_SHIFT));
+		wrmsr(MTRRphysMask_MSR(reg), -size << PAGE_SHIFT | 0x800,
+		      (-size & size_and_mask) >> (32 - PAGE_SHIFT));
+	}
+
+	post_set();
 }
 
 int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
@@ -178,7 +387,7 @@ int positive_have_wrcomb(void)
  */
 struct mtrr_ops generic_mtrr_ops = {
 	.use_intel_if      = 1,
-	.init_secondary    = generic_init_secondary,
+	.set_all	   = generic_set_all,
 	.get               = generic_get_mtrr,
 	.get_free_region   = generic_get_free_region,
 	.set               = generic_set_mtrr,

arch/i386/kernel/cpu/mtrr/main.c

@@ -163,8 +163,11 @@ static void ipi_handler(void *info)
 	}
 
 	/*  The master has cleared me to execute  */
-	mtrr_if->set(data->smp_reg, data->smp_base, 
-		     data->smp_size, data->smp_type);
+	if (data->smp_reg != ~0UL) 
+		mtrr_if->set(data->smp_reg, data->smp_base, 
+			     data->smp_size, data->smp_type);
+	else
+		mtrr_if->set_all();
 
 	atomic_dec(&data->count);
 	while(atomic_read(&data->gate)) {
@@ -243,7 +246,15 @@ static void set_mtrr(unsigned int reg, unsigned long base,
 	atomic_set(&data.gate,1);
 
 	/* do our MTRR business */
-	mtrr_if->set(reg,base,size,type);
+
+	/* HACK!
+	 * We use this same function to initialize the mtrrs on boot.
+	 * The state of the boot cpu's mtrrs has been saved, and we want
+	 * to replicate across all the APs. 
+	 * If we're doing that @reg is set to something special...
+	 */
+	if (reg != ~0UL) 
+		mtrr_if->set(reg,base,size,type);
 
 	/* wait for the others */
 	while(atomic_read(&data.count)) {
@@ -530,6 +541,20 @@ static void __init init_ifs(void)
 	centaur_init_mtrr();
 }
 
+static void init_other_cpus(void)
+{
+	if (use_intel())
+		get_mtrr_state();
+
+	/* bring up the other processors */
+	set_mtrr(~0UL,0,0,0);
+
+	if (use_intel()) {
+		finalize_mtrr_state();
+		mtrr_state_warn();
+	}
+}
+
 /**
  * mtrr_init - initialie mtrrs on the boot CPU
  *
@@ -537,7 +562,7 @@ static void __init init_ifs(void)
  * initialized (i.e. before smp_init()).
  * 
  */
-int __init mtrr_init(void)
+static int __init mtrr_init(void)
 {
 	init_ifs();
 
@@ -608,21 +633,15 @@ int __init mtrr_init(void)
 			break;
 		}
 	}
+	printk("mtrr: v%s\n",MTRR_VERSION);
+
 	if (mtrr_if) {
 		set_num_var_ranges();
-		if (use_intel()) {
-			/* Only for Intel MTRRs */
-			get_mtrr_state();
-		}
 		init_table();
+		init_other_cpus();
 	}
-#if 0
-	printk("mtrr: v%s Richard Gooch (rgooch@atnf.csiro.au)\n"
-	       "mtrr: detected mtrr type: %s\n",
-	       MTRR_VERSION, mtrr_if_name[mtrr_if]);
-#endif
 	return mtrr_if ? -ENXIO : 0;
 }
 
-//subsys_initcall(mtrr_init);
+core_initcall(mtrr_init);
 

arch/i386/kernel/cpu/mtrr/mtrr.h

@@ -38,9 +38,10 @@ struct mtrr_ops {
 	u32	vendor;
 	u32	use_intel_if;
 	void	(*init)(void);
-	void	(*init_secondary)(void);
 	void	(*set)(unsigned int reg, unsigned long base,
 		       unsigned long size, mtrr_type type);
+	void	(*set_all)(void);
+
 	void	(*get)(unsigned int reg, unsigned long *base,
 		       unsigned long *size, mtrr_type * type);
 	int	(*get_free_region) (unsigned long base, unsigned long size);

arch/i386/kernel/cpu/mtrr/state.c

 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <asm/io.h>
 #include <asm/mtrr.h>
 #include <asm/msr.h>
 #include "mtrr.h"
 
-struct mtrr_state {
-	struct mtrr_var_range *var_ranges;
-	mtrr_type fixed_ranges[NUM_FIXED_RANGES];
-	unsigned char enabled;
-	mtrr_type def_type;
-};
-
-static unsigned long smp_changes_mask __initdata = 0;
-struct mtrr_state mtrr_state = {};
-
-static int __init set_fixed_ranges(mtrr_type * frs)
-{
-	unsigned long *p = (unsigned long *) frs;
-	int changed = FALSE;
-	int i;
-	unsigned long lo, hi;
-
-	rdmsr(MTRRfix64K_00000_MSR, lo, hi);
-	if (p[0] != lo || p[1] != hi) {
-		wrmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
-		changed = TRUE;
-	}
-
-	for (i = 0; i < 2; i++) {
-		rdmsr(MTRRfix16K_80000_MSR + i, lo, hi);
-		if (p[2 + i * 2] != lo || p[3 + i * 2] != hi) {
-			wrmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2],
-			      p[3 + i * 2]);
-			changed = TRUE;
-		}
-	}
-
-	for (i = 0; i < 8; i++) {
-		rdmsr(MTRRfix4K_C0000_MSR + i, lo, hi);
-		if (p[6 + i * 2] != lo || p[7 + i * 2] != hi) {
-			wrmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2],
-			      p[7 + i * 2]);
-			changed = TRUE;
-		}
-	}
-	return changed;
-}
-
-/*  Set the MSR pair relating to a var range. Returns TRUE if
-    changes are made  */
-static int __init set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
-{
-	unsigned int lo, hi;
-	int changed = FALSE;
-
-	rdmsr(MTRRphysBase_MSR(index), lo, hi);
-	if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
-	    || (vr->base_hi & 0xfUL) != (hi & 0xfUL)) {
-		wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
-		changed = TRUE;
-	}
-
-	rdmsr(MTRRphysMask_MSR(index), lo, hi);
-
-	if ((vr->mask_lo & 0xfffff800UL) != (lo & 0xfffff800UL)
-	    || (vr->mask_hi & 0xfUL) != (hi & 0xfUL)) {
-		wrmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
-		changed = TRUE;
-	}
-	return changed;
-}
-
-static unsigned long set_mtrr_state(u32 deftype_lo, u32 deftype_hi)
-/*  [SUMMARY] Set the MTRR state for this CPU.
-    <state> The MTRR state information to read.
-    <ctxt> Some relevant CPU context.
-    [NOTE] The CPU must already be in a safe state for MTRR changes.
-    [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
-{
-	unsigned int i;
-	unsigned long change_mask = 0;
-
-	for (i = 0; i < num_var_ranges; i++)
-		if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
-			change_mask |= MTRR_CHANGE_MASK_VARIABLE;
-
-	if (set_fixed_ranges(mtrr_state.fixed_ranges))
-		change_mask |= MTRR_CHANGE_MASK_FIXED;
-
-	/*  Set_mtrr_restore restores the old value of MTRRdefType,
-	   so to set it we fiddle with the saved value  */
-	if ((deftype_lo & 0xff) != mtrr_state.def_type
-	    || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
-		deftype_lo |= (mtrr_state.def_type | mtrr_state.enabled << 10);
-		change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
-	}
-
-	return change_mask;
-}
-
-
-/*  Some BIOS's are fucked and don't set all MTRRs the same!  */
-static void __init mtrr_state_warn(void)
-{
-	unsigned long mask = smp_changes_mask;
-	if (!mask)
-		return;
-	if (mask & MTRR_CHANGE_MASK_FIXED)
-		printk
-		    ("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
-	if (mask & MTRR_CHANGE_MASK_VARIABLE)
-		printk
-		    ("mtrr: your CPUs had inconsistent variable MTRR settings\n");
-	if (mask & MTRR_CHANGE_MASK_DEFTYPE)
-		printk
-		    ("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
-	printk("mtrr: probably your BIOS does not setup all CPUs\n");
-}
-
-/*  Free resources associated with a struct mtrr_state  */
-static void __init finalize_mtrr_state(void)
-{
-	if (mtrr_state.var_ranges)
-		kfree(mtrr_state.var_ranges);
-	mtrr_state.var_ranges = NULL;
-}
-
-/*  Get the MSR pair relating to a var range  */
-static void __init
-get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
-{
-	rdmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
-	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
-}
-
-static void __init
-get_fixed_ranges(mtrr_type * frs)
-{
-	unsigned long *p = (unsigned long *) frs;
-	int i;
-
-	rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
-
-	for (i = 0; i < 2; i++)
-		rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
-	for (i = 0; i < 8; i++)
-		rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
-}
-
-/*  Grab all of the MTRR state for this CPU into *state  */
-void get_mtrr_state(void)
-{
-	unsigned int i;
-	struct mtrr_var_range *vrs;
-	unsigned long lo, dummy;
-
-	if (!mtrr_state.var_ranges) {
-		mtrr_state.var_ranges = kmalloc(num_var_ranges * sizeof (struct mtrr_var_range), 
-						GFP_KERNEL);
-		if (!mtrr_state.var_ranges)
-			return;
-	} 
-	vrs = mtrr_state.var_ranges;
-
-	for (i = 0; i < num_var_ranges; i++)
-		get_mtrr_var_range(i, &vrs[i]);
-	get_fixed_ranges(mtrr_state.fixed_ranges);
-
-	rdmsr(MTRRdefType_MSR, lo, dummy);
-	mtrr_state.def_type = (lo & 0xff);
-	mtrr_state.enabled = (lo & 0xc00) >> 10;
-}
-
 
 /*  Put the processor into a state where MTRRs can be safely set  */
 void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
@@ -246,93 +76,3 @@ void set_mtrr_done(struct set_mtrr_context *ctxt)
 	local_irq_restore(ctxt->flags);
 }
 
-void __init generic_init_secondary(void)
-{
-	u32 cr0, cr4 = 0;
-	u32 deftype_lo, deftype_hi;
-	unsigned long mask, count;
-
-	/*  Note that this is not ideal, since the cache is only flushed/disabled
-	   for this CPU while the MTRRs are changed, but changing this requires
-	   more invasive changes to the way the kernel boots  */
-
-	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
-		cr4 = read_cr4();
-		write_cr4(cr4 & (unsigned char) ~(1 << 7));
-	}
-
-	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
-	    a side-effect  */
-	cr0 = read_cr0() | 0x40000000;
-	wbinvd();
-	write_cr0(cr0);
-	wbinvd();
-
-	/*  Save MTRR state */
-	rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
-
-	/*  Disable MTRRs, and set the default type to uncached  */
-	wrmsr(MTRRdefType_MSR, deftype_lo & 0xf300UL, deftype_hi);
-
-	/* Actually set the state */
-	mask = set_mtrr_state(deftype_lo,deftype_hi);
-
-	/*  Flush caches and TLBs  */
-	wbinvd();
-
-	/* Intel (P6) standard MTRRs */
-	wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
-		
-	/*  Enable caches  */
-	write_cr0(read_cr0() & 0xbfffffff);
-
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
-		write_cr4(cr4);
-
-	/*  Use the atomic bitops to update the global mask  */
-	for (count = 0; count < sizeof mask * 8; ++count) {
-		if (mask & 0x01)
-			set_bit(count, &smp_changes_mask);
-		mask >>= 1;
-	}
-}
-
-/**
- * mtrr_init_secondary - setup AP MTRR state
- * 
- * Yes, this code is exactly the same as the set_mtrr code, except for the 
- * piece in the middle - you set all the ranges at once, instead of one
- * register at a time.
- * Shoot me.
- */
-void __init mtrr_init_secondary_cpu(void)
-{
-	unsigned long flags;
-
-	if (!mtrr_if || !mtrr_if->init_secondary) {
-		/* I see no MTRRs I can support in SMP mode... */
-		printk("mtrr: SMP support incomplete for this vendor\n");
-		return;
-	}
-
-	local_irq_save(flags);
-	mtrr_if->init_secondary();
-	local_irq_restore(flags);
-}
-
-/**
- * mtrr_final_init  - finalize initialization sequence.
- */
-static int __init mtrr_finalize_state(void)
-{
-	if (use_intel()) {
-		finalize_mtrr_state();
-		mtrr_state_warn();
-	}
-	return 0;
-}
-
-arch_initcall(mtrr_finalize_state);
-

arch/i386/kernel/smpboot.c

@@ -45,7 +45,6 @@
 
 #include <linux/delay.h>
 #include <linux/mc146818rtc.h>
-#include <asm/mtrr.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/smpboot.h>
@@ -403,12 +402,6 @@ void __init smp_callin(void)
 
 	local_irq_enable();
 
-#ifdef CONFIG_MTRR
-	/*
-	 * Must be done before calibration delay is computed
-	 */
-	mtrr_init_secondary_cpu ();
-#endif
 	/*
 	 * Get our bogomips.
 	 */

arch/i386/kernel/time.c

@@ -115,7 +115,7 @@ static inline unsigned long do_fast_gettimeoffset(void)
 	return delay_at_last_interrupt + edx;
 }
 
-#define TICK_SIZE tick
+#define TICK_SIZE (tick_nsec / 1000)
 
 spinlock_t i8253_lock = SPIN_LOCK_UNLOCKED;
 EXPORT_SYMBOL(i8253_lock);
@@ -280,7 +280,7 @@ void do_gettimeofday(struct timeval *tv)
 			usec += lost * (1000000 / HZ);
 	}
 	sec = xtime.tv_sec;
-	usec += xtime.tv_usec;
+	usec += (xtime.tv_nsec / 1000);
 	read_unlock_irqrestore(&xtime_lock, flags);
 
 	while (usec >= 1000000) {
@@ -309,7 +309,8 @@ void do_settimeofday(struct timeval *tv)
 		tv->tv_sec--;
 	}
 
-	xtime = *tv;
+	xtime.tv_sec = tv->tv_sec;
+	xtime.tv_nsec = (tv->tv_usec * 1000);
 	time_adjust = 0;		/* stop active adjtime() */
 	time_status |= STA_UNSYNC;
 	time_maxerror = NTP_PHASE_LIMIT;
@@ -437,8 +438,8 @@ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *reg
 	 */
 	if ((time_status & STA_UNSYNC) == 0 &&
 	    xtime.tv_sec > last_rtc_update + 660 &&
-	    xtime.tv_usec >= 500000 - ((unsigned) tick) / 2 &&
-	    xtime.tv_usec <= 500000 + ((unsigned) tick) / 2) {
+	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 		if (set_rtc_mmss(xtime.tv_sec) == 0)
 			last_rtc_update = xtime.tv_sec;
 		else
@@ -655,7 +656,7 @@ void __init time_init(void)
 	extern int x86_udelay_tsc;
 	
 	xtime.tv_sec = get_cmos_time();
-	xtime.tv_usec = 0;
+	xtime.tv_nsec = 0;
 
 /*
  * If we have APM enabled or the CPU clock speed is variable

drivers/acpi/Config.in

@@ -2,91 +2,78 @@
 # ACPI Configuration
 #
 
-if [ "$CONFIG_X86" = "y" ]; then
-
-  mainmenu_option next_comment
-  comment 'ACPI Support'
-  bool         'ACPI Support' CONFIG_ACPI
-  if [ "$CONFIG_ACPI" = "y" ]; then
-    if [ "$CONFIG_X86_LOCAL_APIC" = "y" ]; then
-      bool         'CPU Enumeration Only' CONFIG_ACPI_HT_ONLY
-    fi
+mainmenu_option next_comment
+comment 'ACPI Support'
 
-    if [ "$CONFIG_ACPI_HT_ONLY" = "y" ]; then
-      define_bool CONFIG_ACPI_BOOT		y
-    else
-      define_bool CONFIG_ACPI_BOOT		y
-      define_bool CONFIG_ACPI_BUS		y
-      define_bool CONFIG_ACPI_INTERPRETER	y
-      define_bool CONFIG_ACPI_EC		y
-      define_bool CONFIG_ACPI_POWER		y
-      if [ "$CONFIG_PCI" = "y" ]; then
-        define_bool CONFIG_ACPI_PCI		y
-      fi
-      define_bool CONFIG_ACPI_SLEEP		$CONFIG_SOFTWARE_SUSPEND
-      define_bool CONFIG_ACPI_SYSTEM		y
-      tristate     '  AC Adapter'	CONFIG_ACPI_AC
-      tristate     '  Battery'		CONFIG_ACPI_BATTERY
-      tristate     '  Button'		CONFIG_ACPI_BUTTON
-      tristate     '  Fan'		CONFIG_ACPI_FAN
-      tristate     '  Processor'	CONFIG_ACPI_PROCESSOR
-      dep_tristate '  Thermal Zone' 	CONFIG_ACPI_THERMAL $CONFIG_ACPI_PROCESSOR
-      if [ "$CONFIG_NUMA" = "y" ]; then
-         dep_bool       '  NUMA support'     CONFIG_ACPI_NUMA $CONFIG_NUMA
+if [ "$CONFIG_X86" = "y" ]; then
+   bool 'ACPI Support' CONFIG_ACPI
+   if [ "$CONFIG_ACPI" = "y" ]; then
+      if [ "$CONFIG_X86_LOCAL_APIC" = "y" ]; then
+         bool         'CPU Enumeration Only' CONFIG_ACPI_HT_ONLY
       fi
-      tristate     '  Toshiba Laptop Extras'	CONFIG_ACPI_TOSHIBA
-      bool         '  Debug Statements'	CONFIG_ACPI_DEBUG
-    fi
-  fi
 
-  endmenu
+      define_bool CONFIG_ACPI_BOOT y
 
-fi
+      if [ "$CONFIG_ACPI_HT_ONLY" != "y" ]; then
+         tristate '  AC Adapter' CONFIG_ACPI_AC
+         tristate '  Battery' CONFIG_ACPI_BATTERY
+         tristate '  Button' CONFIG_ACPI_BUTTON
+         tristate '  Fan' CONFIG_ACPI_FAN
+         tristate '  Processor'	CONFIG_ACPI_PROCESSOR
+         dep_tristate '  Thermal Zone' CONFIG_ACPI_THERMAL $CONFIG_ACPI_PROCESSOR
+         if [ "$CONFIG_NUMA" = "y" ]; then
+            dep_bool '  NUMA support' CONFIG_ACPI_NUMA $CONFIG_NUMA
+         fi
+         tristate '  Toshiba Laptop Extras' CONFIG_ACPI_TOSHIBA
+         bool '  Debug Statements' CONFIG_ACPI_DEBUG
 
+         define_bool CONFIG_ACPI_BOOT y
+         define_bool CONFIG_ACPI_BUS y
+         define_bool CONFIG_ACPI_INTERPRETER y
+         define_bool CONFIG_ACPI_EC y
+         define_bool CONFIG_ACPI_POWER y
+         define_bool CONFIG_ACPI_PCI $CONFIG_PCI
+         define_bool CONFIG_ACPI_SLEEP $CONFIG_SOFTWARE_SUSPEND
+         define_bool CONFIG_ACPI_SYSTEM	y
+      fi
+   fi
+fi
 
 if [ "$CONFIG_IA64" = "y" ]; then
+   if [ "$CONFIG_IA64_SGI_SN" = "y" ]; then
+      define_bool CONFIG_ACPI y
+      define_bool CONFIG_ACPI_EFI y
+      define_bool CONFIG_ACPI_BOOT y
+      define_bool CONFIG_ACPI_BUS n
+      define_bool CONFIG_ACPI_INTERPRETER n
+      define_bool CONFIG_ACPI_PCI n
+      define_bool CONFIG_ACPI_POWER n
+      define_bool CONFIG_ACPI_SYSTEM n
+      define_bool CONFIG_ACPI_BUTTON n
+      define_bool CONFIG_ACPI_FAN n
+      define_bool CONFIG_ACPI_PROCESSOR n
+      define_bool CONFIG_ACPI_THERMAL n
+      define_bool CONFIG_ACPI_NUMA y
+   fi
 
-  if [ "$CONFIG_IA64_SGI_SN" = "y" ]; then
-    mainmenu_option next_comment
-    comment 'ACPI Support'
-    define_bool CONFIG_ACPI		y
-    define_bool CONFIG_ACPI_EFI		y
-    define_bool CONFIG_ACPI_BOOT	y
-    define_bool CONFIG_ACPI_BUS		n
-    define_bool CONFIG_ACPI_INTERPRETER n
-    define_bool CONFIG_ACPI_PCI		n
-    define_bool CONFIG_ACPI_POWER 	n
-    define_bool CONFIG_ACPI_SYSTEM 	n
-    define_bool CONFIG_ACPI_BUTTON	n
-    define_bool CONFIG_ACPI_FAN		n
-    define_bool CONFIG_ACPI_PROCESSOR	n
-    define_bool CONFIG_ACPI_THERMAL	n
-    define_bool CONFIG_ACPI_NUMA	y
-    endmenu
-  fi
-
-  if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
-    mainmenu_option next_comment
-    comment 'ACPI Support'
-    if [ "$CONFIG_PCI" = "y" ]; then
-      define_bool CONFIG_ACPI_PCI 	y
-    fi
-    define_bool CONFIG_ACPI		y
-    define_bool CONFIG_ACPI_EFI		y
-    define_bool CONFIG_ACPI_BOOT	y
-    define_bool CONFIG_ACPI_BUS		y
-    define_bool CONFIG_ACPI_INTERPRETER y
-    define_bool CONFIG_ACPI_POWER 	y
-    define_bool CONFIG_ACPI_SYSTEM 	y
-    tristate     '  Button'		CONFIG_ACPI_BUTTON
-    tristate     '  Fan'		CONFIG_ACPI_FAN
-    tristate     '  Processor'		CONFIG_ACPI_PROCESSOR
-    dep_tristate '  Thermal Zone'       CONFIG_ACPI_THERMAL $CONFIG_ACPI_PROCESSOR
-    if [ "$CONFIG_NUMA" = "y" ]; then
-       dep_bool       '  NUMA support'       CONFIG_ACPI_NUMA $CONFIG_NUMA
-    fi
-    bool         '  Debug Statements' 	CONFIG_ACPI_DEBUG
-    endmenu
-  fi
-
+   if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then
+      tristate     '  Button' CONFIG_ACPI_BUTTON
+      tristate     '  Fan' CONFIG_ACPI_FAN
+      tristate     '  Processor' CONFIG_ACPI_PROCESSOR
+      dep_tristate '  Thermal Zone' CONFIG_ACPI_THERMAL $CONFIG_ACPI_PROCESSOR
+      if [ "$CONFIG_NUMA" = "y" ]; then
+         dep_bool '  NUMA support' CONFIG_ACPI_NUMA $CONFIG_NUMA
+      fi
+      bool '  Debug Statements' CONFIG_ACPI_DEBUG
+      define_bool CONFIG_ACPI_PCI $CONFIG_PCI
+      define_bool CONFIG_ACPI y
+      define_bool CONFIG_ACPI_EFI y
+      define_bool CONFIG_ACPI_BOOT y
+      define_bool CONFIG_ACPI_BUS y
+      define_bool CONFIG_ACPI_INTERPRETER y
+      define_bool CONFIG_ACPI_POWER y
+      define_bool CONFIG_ACPI_SYSTEM y
+   fi
 fi
+
+endmenu

drivers/acpi/ac.c

@@ -51,7 +51,7 @@ static struct acpi_driver acpi_ac_driver = {
 	.class =	ACPI_AC_CLASS,
 	.ids =		ACPI_AC_HID,
 	.ops =		{
-				.add =	acpi_ac_add,
+				.add =		acpi_ac_add,
 				.remove =	acpi_ac_remove,
 			},
 };

drivers/acpi/acpi_ksyms.c

@@ -114,6 +114,7 @@ EXPORT_SYMBOL(acpi_evaluate_reference);
 #ifdef CONFIG_ACPI_BUS
 
 EXPORT_SYMBOL(acpi_fadt);
+EXPORT_SYMBOL(acpi_walk_namespace);
 EXPORT_SYMBOL(acpi_root_dir);
 EXPORT_SYMBOL(acpi_bus_get_device);
 EXPORT_SYMBOL(acpi_bus_get_status);
@@ -127,4 +128,3 @@ EXPORT_SYMBOL(acpi_bus_scan);
 EXPORT_SYMBOL(acpi_init);
 
 #endif /*CONFIG_ACPI_BUS*/
-

drivers/acpi/battery.c

@@ -162,7 +162,7 @@ acpi_battery_get_info (
 	}
 
 end:
-	kfree(buffer.pointer);
+	acpi_os_free(buffer.pointer);
 
 	if (!result)
 		(*bif) = (struct acpi_battery_info *) data.pointer;
@@ -223,7 +223,7 @@ acpi_battery_get_status (
 	}
 
 end:
-	kfree(buffer.pointer);
+	acpi_os_free(buffer.pointer);
 
 	if (!result)
 		(*bst) = (struct acpi_battery_status *) data.pointer;

drivers/acpi/bus.c

@@ -32,7 +32,9 @@
 #include <linux/sched.h>
 #include <linux/pm.h>
 #include <linux/proc_fs.h>
+#ifdef CONFIG_X86
 #include <asm/mpspec.h>
+#endif
 #include "acpi_bus.h"
 #include "acpi_drivers.h"
 #include "include/acinterp.h"	/* for acpi_ex_eisa_id_to_string() */
@@ -665,7 +667,7 @@ acpi_bus_generate_event (
 	if (!event_is_open)
 		return_VALUE(0);
 
-	event = kmalloc(sizeof(struct acpi_bus_event), GFP_KERNEL);
+	event = kmalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
 	if (!event)
 		return_VALUE(-ENOMEM);
 
@@ -1967,11 +1969,13 @@ acpi_bus_init (void)
 		goto error1;
 	}
 
+#ifdef CONFIG_X86
 	/* Ensure the SCI is set to level-triggered, active-low */
 	if (acpi_ioapic)
 		mp_override_legacy_irq(acpi_fadt.sci_int, 3, 3, acpi_fadt.sci_int);
 	else
 		eisa_set_level_irq(acpi_fadt.sci_int);
+#endif
 
 	status = acpi_enable_subsystem(ACPI_FULL_INITIALIZATION);
 	if (ACPI_FAILURE(status)) {

drivers/acpi/button.c

@@ -70,7 +70,6 @@ struct acpi_button {
 
 static struct proc_dir_entry	*acpi_button_dir = NULL;
 
-
 static int
 acpi_button_read_info (
 	char			*page,

drivers/acpi/debugger/Makefile

-#
-# Makefile for all Linux ACPI interpreter subdirectories
-#
-
-obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
-
-EXTRA_CFLAGS += $(ACPI_CFLAGS)
-
-include $(TOPDIR)/Rules.make

drivers/acpi/debugger/dbhistry.c

-/******************************************************************************
- *
- * Module Name: dbhistry - debugger HISTORY command
- *              $Revision: 25 $
- *
- *****************************************************************************/
-
-/*
- *  Copyright (C) 2000 - 2002, R. Byron Moore
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#include "acpi.h"
-#include "acdebug.h"
-
-#ifdef ACPI_DEBUGGER
-
-#define _COMPONENT          ACPI_CA_DEBUGGER
-	 ACPI_MODULE_NAME    ("dbhistry")
-
-
-#define HI_NO_HISTORY       0
-#define HI_RECORD_HISTORY   1
-#define HISTORY_SIZE        20
-
-
-typedef struct history_info
-{
-	NATIVE_CHAR             command[80];
-	u32                     cmd_num;
-
-} HISTORY_INFO;
-
-
-static HISTORY_INFO         acpi_gbl_history_buffer[HISTORY_SIZE];
-static u16                  acpi_gbl_lo_history = 0;
-static u16                  acpi_gbl_num_history = 0;
-static u16                  acpi_gbl_next_history_index = 0;
-static u32                  acpi_gbl_next_cmd_num = 1;
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_add_to_history
- *
- * PARAMETERS:  Command_line    - Command to add
- *
- * RETURN:      None
- *
- * DESCRIPTION: Add a command line to the history buffer.
- *
- ******************************************************************************/
-
-void
-acpi_db_add_to_history (
-	NATIVE_CHAR             *command_line)
-{
-
-	/* Put command into the next available slot */
-
-	ACPI_STRCPY (acpi_gbl_history_buffer[acpi_gbl_next_history_index].command, command_line);
-
-	acpi_gbl_history_buffer[acpi_gbl_next_history_index].cmd_num = acpi_gbl_next_cmd_num;
-
-	/* Adjust indexes */
-
-	if ((acpi_gbl_num_history == HISTORY_SIZE) &&
-		(acpi_gbl_next_history_index == acpi_gbl_lo_history)) {
-		acpi_gbl_lo_history++;
-		if (acpi_gbl_lo_history >= HISTORY_SIZE) {
-			acpi_gbl_lo_history = 0;
-		}
-	}
-
-	acpi_gbl_next_history_index++;
-	if (acpi_gbl_next_history_index >= HISTORY_SIZE) {
-		acpi_gbl_next_history_index = 0;
-	}
-
-	acpi_gbl_next_cmd_num++;
-	if (acpi_gbl_num_history < HISTORY_SIZE) {
-		acpi_gbl_num_history++;
-	}
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_display_history
- *
- * PARAMETERS:  None
- *
- * RETURN:      None
- *
- * DESCRIPTION: Display the contents of the history buffer
- *
- ******************************************************************************/
-
-void
-acpi_db_display_history (void)
-{
-	NATIVE_UINT             i;
-	u16                     history_index;
-
-
-	history_index = acpi_gbl_lo_history;
-
-	/* Dump entire history buffer */
-
-	for (i = 0; i < acpi_gbl_num_history; i++) {
-		acpi_os_printf ("%ld %s\n", acpi_gbl_history_buffer[history_index].cmd_num,
-				 acpi_gbl_history_buffer[history_index].command);
-
-		history_index++;
-		if (history_index >= HISTORY_SIZE) {
-			history_index = 0;
-		}
-	}
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_get_from_history
- *
- * PARAMETERS:  Command_num_arg         - String containing the number of the
- *                                        command to be retrieved
- *
- * RETURN:      None
- *
- * DESCRIPTION: Get a command from the history buffer
- *
- ******************************************************************************/
-
-NATIVE_CHAR *
-acpi_db_get_from_history (
-	NATIVE_CHAR             *command_num_arg)
-{
-	NATIVE_UINT             i;
-	u16                     history_index;
-	u32                     cmd_num;
-
-
-	if (command_num_arg == NULL) {
-		cmd_num = acpi_gbl_next_cmd_num - 1;
-	}
-
-	else {
-		cmd_num = ACPI_STRTOUL (command_num_arg, NULL, 0);
-	}
-
-	/* Search history buffer */
-
-	history_index = acpi_gbl_lo_history;
-	for (i = 0; i < acpi_gbl_num_history; i++) {
-		if (acpi_gbl_history_buffer[history_index].cmd_num == cmd_num) {
-			/* Found the commnad, return it */
-
-			return (acpi_gbl_history_buffer[history_index].command);
-		}
-
-
-		history_index++;
-		if (history_index >= HISTORY_SIZE) {
-			history_index = 0;
-		}
-	}
-
-	acpi_os_printf ("Invalid history number: %d\n", history_index);
-	return (NULL);
-}
-
-
-#endif /* ACPI_DEBUGGER */
-

drivers/acpi/debugger/dbutils.c

-/*******************************************************************************
- *
- * Module Name: dbutils - AML debugger utilities
- *              $Revision: 56 $
- *
- ******************************************************************************/
-
-/*
- *  Copyright (C) 2000 - 2002, R. Byron Moore
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#include "acpi.h"
-#include "acparser.h"
-#include "amlcode.h"
-#include "acnamesp.h"
-#include "acdebug.h"
-#include "acdispat.h"
-
-
-#ifdef ACPI_DEBUGGER
-
-#define _COMPONENT          ACPI_CA_DEBUGGER
-	 ACPI_MODULE_NAME    ("dbutils")
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_set_output_destination
- *
- * PARAMETERS:  Output_flags        - Current flags word
- *
- * RETURN:      None
- *
- * DESCRIPTION: Set the current destination for debugger output.  Alos sets
- *              the debug output level accordingly.
- *
- ******************************************************************************/
-
-void
-acpi_db_set_output_destination (
-	u32                     output_flags)
-{
-
-	acpi_gbl_db_output_flags = (u8) output_flags;
-
-	if ((output_flags & ACPI_DB_REDIRECTABLE_OUTPUT) && acpi_gbl_db_output_to_file) {
-		acpi_dbg_level = acpi_gbl_db_debug_level;
-	}
-	else {
-		acpi_dbg_level = acpi_gbl_db_console_debug_level;
-	}
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_dump_buffer
- *
- * PARAMETERS:  Address             - Pointer to the buffer
- *
- * RETURN:      None
- *
- * DESCRIPTION: Print a portion of a buffer
- *
- ******************************************************************************/
-
-void
-acpi_db_dump_buffer (
-	u32                     address)
-{
-
-	acpi_os_printf ("\nLocation %X:\n", address);
-
-	acpi_dbg_level |= ACPI_LV_TABLES;
-	acpi_ut_dump_buffer (ACPI_TO_POINTER (address), 64, DB_BYTE_DISPLAY, ACPI_UINT32_MAX);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_dump_object
- *
- * PARAMETERS:  Obj_desc        - External ACPI object to dump
- *              Level           - Nesting level.
- *
- * RETURN:      None
- *
- * DESCRIPTION: Dump the contents of an ACPI external object
- *
- ******************************************************************************/
-
-void
-acpi_db_dump_object (
-	acpi_object             *obj_desc,
-	u32                     level)
-{
-	u32                     i;
-
-
-	if (!obj_desc) {
-		acpi_os_printf ("[Null Object]\n");
-		return;
-	}
-
-	for (i = 0; i < level; i++) {
-		acpi_os_printf (" ");
-	}
-
-	switch (obj_desc->type) {
-	case ACPI_TYPE_ANY:
-
-		acpi_os_printf ("[Object Reference] = %p\n", obj_desc->reference.handle);
-		break;
-
-
-	case ACPI_TYPE_INTEGER:
-
-		acpi_os_printf ("[Integer] = %8.8X%8.8X\n",
-				 ACPI_HIDWORD (obj_desc->integer.value),
-				 ACPI_LODWORD (obj_desc->integer.value));
-		break;
-
-
-	case ACPI_TYPE_STRING:
-
-		acpi_os_printf ("[String] Value: ");
-		for (i = 0; i < obj_desc->string.length; i++) {
-			acpi_os_printf ("%c", obj_desc->string.pointer[i]);
-		}
-		acpi_os_printf ("\n");
-		break;
-
-
-	case ACPI_TYPE_BUFFER:
-
-		acpi_os_printf ("[Buffer] Length %.2X = ", obj_desc->buffer.length);
-		acpi_ut_dump_buffer ((u8 *) obj_desc->buffer.pointer, obj_desc->buffer.length, DB_DWORD_DISPLAY, _COMPONENT);
-		break;
-
-
-	case ACPI_TYPE_PACKAGE:
-
-		acpi_os_printf ("[Package] Contains %d Elements: \n", obj_desc->package.count);
-
-		for (i = 0; i < obj_desc->package.count; i++) {
-			acpi_db_dump_object (&obj_desc->package.elements[i], level+1);
-		}
-		break;
-
-
-	case INTERNAL_TYPE_REFERENCE:
-
-		acpi_os_printf ("[Object Reference] = %p\n", obj_desc->reference.handle);
-		break;
-
-
-	case ACPI_TYPE_PROCESSOR:
-
-		acpi_os_printf ("[Processor]\n");
-		break;
-
-
-	case ACPI_TYPE_POWER:
-
-		acpi_os_printf ("[Power Resource]\n");
-		break;
-
-
-	default:
-
-		acpi_os_printf ("[Unknown Type] %X \n", obj_desc->type);
-		break;
-	}
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_prep_namestring
- *
- * PARAMETERS:  Name            - String to prepare
- *
- * RETURN:      None
- *
- * DESCRIPTION: Translate all forward slashes and dots to backslashes.
- *
- ******************************************************************************/
-
-void
-acpi_db_prep_namestring (
-	NATIVE_CHAR             *name)
-{
-
-
-	if (!name) {
-		return;
-	}
-
-	ACPI_STRUPR (name);
-
-	/* Convert a leading forward slash to a backslash */
-
-	if (*name == '/') {
-		*name = '\\';
-	}
-
-	/* Ignore a leading backslash, this is the root prefix */
-
-	if (*name == '\\') {
-		name++;
-	}
-
-	/* Convert all slash path separators to dots */
-
-	while (*name) {
-		if ((*name == '/') ||
-			(*name == '\\')) {
-			*name = '.';
-		}
-
-		name++;
-	}
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_second_pass_parse
- *
- * PARAMETERS:  Root            - Root of the parse tree
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Second pass parse of the ACPI tables.  We need to wait until
- *              second pass to parse the control methods
- *
- ******************************************************************************/
-
-acpi_status
-acpi_db_second_pass_parse (
-	acpi_parse_object       *root)
-{
-	acpi_parse_object       *op = root;
-	acpi_parse_object       *method;
-	acpi_parse_object       *search_op;
-	acpi_parse_object       *start_op;
-	acpi_status             status = AE_OK;
-	u32                     base_aml_offset;
-	acpi_walk_state         *walk_state;
-
-
-	ACPI_FUNCTION_ENTRY ();
-
-
-	acpi_os_printf ("Pass two parse ....\n");
-
-	while (op) {
-		if (op->common.aml_opcode == AML_METHOD_OP) {
-			method = op;
-
-			/* Create a new walk state for the parse */
-
-			walk_state = acpi_ds_create_walk_state (TABLE_ID_DSDT,
-					   NULL, NULL, NULL);
-			if (!walk_state) {
-				return (AE_NO_MEMORY);
-			}
-
-			/* Init the Walk State */
-
-			walk_state->parser_state.aml        =
-			walk_state->parser_state.aml_start  = method->named.data;
-			walk_state->parser_state.aml_end    =
-			walk_state->parser_state.pkg_end    = method->named.data + method->named.length;
-			walk_state->parser_state.start_scope = op;
-
-			walk_state->descending_callback     = acpi_ds_load1_begin_op;
-			walk_state->ascending_callback      = acpi_ds_load1_end_op;
-
-			/* Perform the AML parse */
-
-			status = acpi_ps_parse_aml (walk_state);
-
-			base_aml_offset = (method->common.value.arg)->common.aml_offset + 1;
-			start_op = (method->common.value.arg)->common.next;
-			search_op = start_op;
-
-			while (search_op) {
-				search_op->common.aml_offset += base_aml_offset;
-				search_op = acpi_ps_get_depth_next (start_op, search_op);
-			}
-		}
-
-		if (op->common.aml_opcode == AML_REGION_OP) {
-			/* TBD: [Investigate] this isn't quite the right thing to do! */
-			/*
-			 *
-			 * Method = (ACPI_DEFERRED_OP *) Op;
-			 * Status = Acpi_ps_parse_aml (Op, Method->Body, Method->Body_length);
-			 */
-		}
-
-		if (ACPI_FAILURE (status)) {
-			break;
-		}
-
-		op = acpi_ps_get_depth_next (root, op);
-	}
-
-	return (status);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    Acpi_db_local_ns_lookup
- *
- * PARAMETERS:  Name            - Name to lookup
- *
- * RETURN:      Pointer to a namespace node
- *
- * DESCRIPTION: Lookup a name in the ACPI namespace
- *
- * Note: Currently begins search from the root.  Could be enhanced to use
- * the current prefix (scope) node as the search beginning point.
- *
- ******************************************************************************/
-
-acpi_namespace_node *
-acpi_db_local_ns_lookup (
-	NATIVE_CHAR             *name)
-{
-	NATIVE_CHAR             *internal_path;
-	acpi_status             status;
-	acpi_namespace_node     *node = NULL;
-
-
-	acpi_db_prep_namestring (name);
-
-	/* Build an internal namestring */
-
-	status = acpi_ns_internalize_name (name, &internal_path);
-	if (ACPI_FAILURE (status)) {
-		acpi_os_printf ("Invalid namestring: %s\n", name);
-		return (NULL);
-	}
-
-	/*
-	 * Lookup the name.
-	 * (Uses root node as the search starting point)
-	 */
-	status = acpi_ns_lookup (NULL, internal_path, ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
-			   ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE, NULL, &node);
-	if (ACPI_FAILURE (status)) {
-		acpi_os_printf ("Could not locate name: %s %s\n", name, acpi_format_exception (status));
-	}
-
-	ACPI_MEM_FREE (internal_path);
-	return (node);
-}
-
-
-#endif /* ACPI_DEBUGGER */
-
-

drivers/acpi/pci_irq.c

@@ -288,7 +288,7 @@ acpi_pci_irq_derive (
 	while (!irq && (bridge = bridge->bus->self)) {
 		pin = (pin + PCI_SLOT(bridge->devfn)) % 4;
 		irq = acpi_pci_irq_lookup(0, bridge->bus->number, PCI_SLOT(bridge->devfn), pin);
-	};
+	}
 
 	if (!irq) {
 		ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Unable to derive IRQ for device %s\n", dev->slot_name));