Commit 987a6c02 authored by Daniel Mack's avatar Daniel Mack Committed by Dmitry Torokhov

Input: switch to input_abs_*() access functions

Change all call sites in drivers/input to not access the ABS axis
information directly anymore. Make them use the access helpers instead.

Also use input_set_abs_params() when possible.
Did some code refactoring as I was on it.
Signed-off-by: default avatarDaniel Mack <daniel@caiaq.de>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 7957e9c4
......@@ -230,7 +230,7 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
input_report_key(input, BTN_RIGHT, 0);
input_report_key(input, BTN_MIDDLE, 0);
input_report_abs(input, ABS_DISTANCE,
input->absmax[ABS_DISTANCE]);
input_abs_get_max(input, ABS_DISTANCE));
} else {
input_report_key(input, BTN_TOUCH, 0);
input_report_key(input, BTN_STYLUS, 0);
......@@ -383,38 +383,37 @@ static int wacom_probe(struct hid_device *hdev,
/* Basics */
input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
input->relbit[0] |= BIT(REL_WHEEL);
set_bit(BTN_TOOL_PEN, input->keybit);
set_bit(BTN_TOUCH, input->keybit);
set_bit(BTN_STYLUS, input->keybit);
set_bit(BTN_STYLUS2, input->keybit);
set_bit(BTN_LEFT, input->keybit);
set_bit(BTN_RIGHT, input->keybit);
set_bit(BTN_MIDDLE, input->keybit);
__set_bit(REL_WHEEL, input->relbit);
__set_bit(BTN_TOOL_PEN, input->keybit);
__set_bit(BTN_TOUCH, input->keybit);
__set_bit(BTN_STYLUS, input->keybit);
__set_bit(BTN_STYLUS2, input->keybit);
__set_bit(BTN_LEFT, input->keybit);
__set_bit(BTN_RIGHT, input->keybit);
__set_bit(BTN_MIDDLE, input->keybit);
/* Pad */
input->evbit[0] |= BIT(EV_MSC);
input->mscbit[0] |= BIT(MSC_SERIAL);
set_bit(BTN_0, input->keybit);
set_bit(BTN_1, input->keybit);
set_bit(BTN_TOOL_FINGER, input->keybit);
/* Distance, rubber and mouse */
input->absbit[0] |= BIT(ABS_DISTANCE);
set_bit(BTN_TOOL_RUBBER, input->keybit);
set_bit(BTN_TOOL_MOUSE, input->keybit);
__set_bit(MSC_SERIAL, input->mscbit);
input->absmax[ABS_PRESSURE] = 511;
input->absmax[ABS_DISTANCE] = 32;
__set_bit(BTN_0, input->keybit);
__set_bit(BTN_1, input->keybit);
__set_bit(BTN_TOOL_FINGER, input->keybit);
input->absmax[ABS_X] = 16704;
input->absmax[ABS_Y] = 12064;
input->absfuzz[ABS_X] = 4;
input->absfuzz[ABS_Y] = 4;
/* Distance, rubber and mouse */
__set_bit(BTN_TOOL_RUBBER, input->keybit);
__set_bit(BTN_TOOL_MOUSE, input->keybit);
input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
return 0;
err_free:
kfree(wdata);
return ret;
......
......@@ -650,12 +650,12 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
t = _IOC_NR(cmd) & ABS_MAX;
abs.value = dev->abs[t];
abs.minimum = dev->absmin[t];
abs.maximum = dev->absmax[t];
abs.fuzz = dev->absfuzz[t];
abs.flat = dev->absflat[t];
abs.resolution = dev->absres[t];
abs.value = input_abs_get_val(dev, t);
abs.minimum = input_abs_get_min(dev, t);
abs.maximum = input_abs_get_max(dev, t);
abs.fuzz = input_abs_get_fuzz(dev, t);
abs.flat = input_abs_get_flat(dev, t);
abs.resolution = input_abs_get_res(dev, t);
if (copy_to_user(p, &abs, min_t(size_t,
_IOC_SIZE(cmd),
......@@ -702,13 +702,13 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
*/
spin_lock_irq(&dev->event_lock);
dev->abs[t] = abs.value;
dev->absmin[t] = abs.minimum;
dev->absmax[t] = abs.maximum;
dev->absfuzz[t] = abs.fuzz;
dev->absflat[t] = abs.flat;
dev->absres[t] = _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
0 : abs.resolution;
input_abs_set_val(dev, t, abs.value);
input_abs_set_min(dev, t, abs.minimum);
input_abs_set_max(dev, t, abs.maximum);
input_abs_set_fuzz(dev, t, abs.fuzz);
input_abs_set_flat(dev, t, abs.flat);
input_abs_set_res(dev, t, _IOC_SIZE(cmd) < sizeof(struct input_absinfo) ?
0 : abs.resolution);
spin_unlock_irq(&dev->event_lock);
......
......@@ -204,8 +204,8 @@ static int input_handle_abs_event(struct input_dev *dev,
}
/* Flush pending "slot" event */
if (is_mt_event && dev->slot != dev->abs[ABS_MT_SLOT]) {
dev->abs[ABS_MT_SLOT] = dev->slot;
if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
}
......
......@@ -530,7 +530,7 @@ static int joydev_ioctl_common(struct joydev *joydev,
{
struct input_dev *dev = joydev->handle.dev;
size_t len;
int i, j;
int i;
const char *name;
/* Process fixed-sized commands. */
......@@ -562,12 +562,11 @@ static int joydev_ioctl_common(struct joydev *joydev,
case JSIOCSCORR:
if (copy_from_user(joydev->corr, argp,
sizeof(joydev->corr[0]) * joydev->nabs))
return -EFAULT;
return -EFAULT;
for (i = 0; i < joydev->nabs; i++) {
j = joydev->abspam[i];
joydev->abs[i] = joydev_correct(dev->abs[j],
&joydev->corr[i]);
int val = input_abs_get_val(dev, joydev->abspam[i]);
joydev->abs[i] = joydev_correct(val, &joydev->corr[i]);
}
return 0;
......@@ -848,25 +847,27 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
for (i = 0; i < joydev->nabs; i++) {
j = joydev->abspam[i];
if (dev->absmax[j] == dev->absmin[j]) {
if (input_abs_get_max(dev, j) == input_abs_get_min(dev, j)) {
joydev->corr[i].type = JS_CORR_NONE;
joydev->abs[i] = dev->abs[j];
joydev->abs[i] = input_abs_get_val(dev, j);
continue;
}
joydev->corr[i].type = JS_CORR_BROKEN;
joydev->corr[i].prec = dev->absfuzz[j];
joydev->corr[i].coef[0] =
(dev->absmax[j] + dev->absmin[j]) / 2 - dev->absflat[j];
joydev->corr[i].coef[1] =
(dev->absmax[j] + dev->absmin[j]) / 2 + dev->absflat[j];
joydev->corr[i].prec = input_abs_get_fuzz(dev, j);
t = (input_abs_get_max(dev, j) + input_abs_get_min(dev, j)) / 2;
joydev->corr[i].coef[0] = t - input_abs_get_flat(dev, j);
joydev->corr[i].coef[1] = t + input_abs_get_flat(dev, j);
t = (dev->absmax[j] - dev->absmin[j]) / 2 - 2 * dev->absflat[j];
t = (input_abs_get_max(dev, j) - input_abs_get_min(dev, j)) / 2
- 2 * input_abs_get_flat(dev, j);
if (t) {
joydev->corr[i].coef[2] = (1 << 29) / t;
joydev->corr[i].coef[3] = (1 << 29) / t;
joydev->abs[i] = joydev_correct(dev->abs[j],
joydev->corr + i);
joydev->abs[i] =
joydev_correct(input_abs_get_val(dev, j),
joydev->corr + i);
}
}
......
......@@ -342,7 +342,8 @@ static int a3d_connect(struct gameport *gameport, struct gameport_driver *drv)
for (i = 0; i < 4; i++) {
if (i < 2)
input_set_abs_params(input_dev, axes[i], 48, input_dev->abs[axes[i]] * 2 - 48, 0, 8);
input_set_abs_params(input_dev, axes[i],
48, input_abs_get_val(input_dev, axes[i]) * 2 - 48, 0, 8);
else
input_set_abs_params(input_dev, axes[i], 2, 253, 0, 0);
input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
......
......@@ -452,7 +452,7 @@ static void adi_init_center(struct adi *adi)
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) {
t = adi->abs[i];
x = adi->dev->abs[t];
x = input_abs_get_val(adi->dev, t);
if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE)
x = i < adi->axes10 ? 512 : 128;
......
......@@ -139,8 +139,8 @@ static int __init amijoy_init(void)
amijoy_dev[i]->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
for (j = 0; j < 2; j++) {
amijoy_dev[i]->absmin[ABS_X + j] = -1;
amijoy_dev[i]->absmax[ABS_X + j] = 1;
XXinput_set_abs_params(amijoy_dev[i], ABS_X + j,
-1, 1, 0, 0);
}
err = input_register_device(amijoy_dev[i]);
......
......@@ -318,11 +318,8 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
for (i = 0; i < gf2k_axes[gf2k->id]; i++)
set_bit(gf2k_abs[i], input_dev->absbit);
for (i = 0; i < gf2k_hats[gf2k->id]; i++) {
set_bit(ABS_HAT0X + i, input_dev->absbit);
input_dev->absmin[ABS_HAT0X + i] = -1;
input_dev->absmax[ABS_HAT0X + i] = 1;
}
for (i = 0; i < gf2k_hats[gf2k->id]; i++)
input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
for (i = 0; i < gf2k_joys[gf2k->id]; i++)
set_bit(gf2k_btn_joy[i], input_dev->keybit);
......@@ -334,11 +331,14 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
gf2k_read(gf2k, data);
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 :
input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32;
input_dev->absmin[gf2k_abs[i]] = 32;
input_dev->absfuzz[gf2k_abs[i]] = 8;
input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
int max = i < 2 ?
input_abs_get_val(input_dev, gf2k_abs[i]) * 2 :
input_abs_get_val(input_dev, gf2k_abs[0]) +
input_abs_get_val(input_dev, gf2k_abs[1]);
int flat = i < 2 ? 24 : 0;
input_set_abs_params(input_dev, gf2k_abs[i],
32, max - 32, 8, flat);
}
err = input_register_device(gf2k->dev);
......
......@@ -270,18 +270,14 @@ static int interact_connect(struct gameport *gameport, struct gameport_driver *d
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) {
set_bit(t, input_dev->absbit);
if (i < interact_type[interact->type].b8) {
input_dev->absmin[t] = 0;
input_dev->absmax[t] = 255;
} else {
input_dev->absmin[t] = -1;
input_dev->absmax[t] = 1;
}
if (i < interact_type[interact->type].b8)
input_set_abs_params(input_dev, t, 0, 255, 0, 0);
else
input_set_abs_params(input_dev, t, -1, 1, 0, 0);
}
for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++)
set_bit(t, input_dev->keybit);
__set_bit(t, input_dev->keybit);
err = input_register_device(interact->dev);
if (err)
......
......@@ -761,17 +761,21 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
for (j = 0; (bits = sw_bit[sw->type][j]); j++) {
int min, max, fuzz, flat;
code = sw_abs[sw->type][j];
set_bit(code, input_dev->absbit);
input_dev->absmax[code] = (1 << bits) - 1;
input_dev->absmin[code] = (bits == 1) ? -1 : 0;
input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
if (code != ABS_THROTTLE)
input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
min = bits == 1 ? -1 : 0;
max = (1 << bits) - 1;
fuzz = (bits >> 1) >= 2 ? 1 << ((bits >> 1) - 2) : 0;
flat = code == ABS_THROTTLE || bits < 5 ?
0 : 1 << (bits - 5);
input_set_abs_params(input_dev, code,
min, max, fuzz, flat);
}
for (j = 0; (code = sw_btn[sw->type][j]); j++)
set_bit(code, input_dev->keybit);
__set_bit(code, input_dev->keybit);
dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k);
......
......@@ -232,15 +232,16 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
if (absdev) {
val = lo + (hi << 8);
#ifdef TABLET_AUTOADJUST
if (val < dev->absmin[ABS_X + i])
dev->absmin[ABS_X + i] = val;
if (val > dev->absmax[ABS_X + i])
dev->absmax[ABS_X + i] = val;
if (val < input_abs_min(dev, ABS_X + i))
input_abs_set_min(dev, ABS_X + i, val);
if (val > input_abs_max(dev, ABS_X + i))
XXinput_abs_set_max(dev, ABS_X + i, val);
#endif
if (i%3) val = dev->absmax[ABS_X + i] - val;
if (i % 3)
val = input_abs_max(dev, ABS_X + i) - val;
input_report_abs(dev, ABS_X + i, val);
} else {
val = (int) (((int8_t)lo) | ((int8_t)hi << 8));
val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
if (i % 3)
val *= -1;
input_report_rel(dev, REL_X + i, val);
......@@ -387,9 +388,11 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr)
#ifdef TABLET_AUTOADJUST
for (i = 0; i < ABS_MAX; i++) {
int diff = input_dev->absmax[ABS_X + i] / 10;
input_dev->absmin[ABS_X + i] += diff;
input_dev->absmax[ABS_X + i] -= diff;
int diff = input_abs_max(input_dev, ABS_X + i) / 10;
input_abs_set_min(input_dev, ABS_X + i,
input_abs_min(input_dev, ABS_X + i) + diff)
XXinput_abs_set_max(input_dev, ABS_X + i,
input_abs_max(input_dev, ABS_X + i) - diff)
}
#endif
......
......@@ -304,21 +304,25 @@ static int uinput_validate_absbits(struct input_dev *dev)
if (!test_bit(cnt, dev->absbit))
continue;
if ((dev->absmax[cnt] <= dev->absmin[cnt])) {
if (input_abs_get_max(dev, cnt) <= input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
"%s: invalid abs[%02x] min:%d max:%d\n",
UINPUT_NAME, cnt,
dev->absmin[cnt], dev->absmax[cnt]);
input_abs_get_min(dev, cnt),
input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
if (dev->absflat[cnt] > (dev->absmax[cnt] - dev->absmin[cnt])) {
if (input_abs_get_flat(dev, cnt) >
input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) {
printk(KERN_DEBUG
"%s: absflat[%02x] out of range: %d "
"%s: abs_flat #%02x out of range: %d "
"(min:%d/max:%d)\n",
UINPUT_NAME, cnt, dev->absflat[cnt],
dev->absmin[cnt], dev->absmax[cnt]);
UINPUT_NAME, cnt,
input_abs_get_flat(dev, cnt),
input_abs_get_min(dev, cnt),
input_abs_get_max(dev, cnt));
retval = -EINVAL;
break;
}
......@@ -343,7 +347,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
struct uinput_user_dev *user_dev;
struct input_dev *dev;
char *name;
int size;
int i, size;
int retval;
if (count != sizeof(struct uinput_user_dev))
......@@ -387,11 +391,12 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
dev->id.product = user_dev->id.product;
dev->id.version = user_dev->id.version;
size = sizeof(int) * ABS_CNT;
memcpy(dev->absmax, user_dev->absmax, size);
memcpy(dev->absmin, user_dev->absmin, size);
memcpy(dev->absfuzz, user_dev->absfuzz, size);
memcpy(dev->absflat, user_dev->absflat, size);
for (i = 0; i < ABS_CNT; i++) {
input_abs_set_max(dev, i, user_dev->absmax[i]);
input_abs_set_min(dev, i, user_dev->absmin[i]);
input_abs_set_fuzz(dev, i, user_dev->absfuzz[i]);
input_abs_set_flat(dev, i, user_dev->absflat[i]);
}
/* check if absmin/absmax/absfuzz/absflat are filled as
* told in Documentation/input/input-programming.txt */
......
......@@ -145,8 +145,8 @@ static int __init pc110pad_init(void)
pc110pad_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
pc110pad_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
pc110pad_dev->absmax[ABS_X] = 0x1ff;
pc110pad_dev->absmax[ABS_Y] = 0x0ff;
input_abs_set_max(pc110pad_dev, ABS_X, 0x1ff);
input_abs_set_max(pc110pad_dev, ABS_Y, 0x0ff);
pc110pad_dev->open = pc110pad_open;
pc110pad_dev->close = pc110pad_close;
......
......@@ -629,8 +629,8 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
__clear_bit(REL_X, dev->relbit);
__clear_bit(REL_Y, dev->relbit);
dev->absres[ABS_X] = priv->x_res;
dev->absres[ABS_Y] = priv->y_res;
input_abs_set_res(dev, ABS_X, priv->x_res);
input_abs_set_res(dev, ABS_Y, priv->y_res);
if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/* Clickpads report only left button */
......
......@@ -22,6 +22,7 @@
#include <linux/random.h>
#include <linux/major.h>
#include <linux/device.h>
#include <linux/kernel.h>
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
#include <linux/miscdevice.h>
#endif
......@@ -134,11 +135,14 @@ static void mousedev_touchpad_event(struct input_dev *dev,
switch (code) {
case ABS_X:
fx(0) = value;
if (mousedev->touch && mousedev->pkt_count >= 2) {
size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
size = input_abs_get_min(dev, ABS_X) -
input_abs_get_max(dev, ABS_X);
if (size == 0)
size = 256 * 2;
tmp = ((value - fx(2)) * 256 * FRACTION_DENOM) / size;
tmp += mousedev->frac_dx;
mousedev->packet.dx = tmp / FRACTION_DENOM;
......@@ -150,10 +154,12 @@ static void mousedev_touchpad_event(struct input_dev *dev,
case ABS_Y:
fy(0) = value;
if (mousedev->touch && mousedev->pkt_count >= 2) {
/* use X size to keep the same scale */
size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
/* use X size for ABS_Y to keep the same scale */
size = input_abs_get_min(dev, ABS_X) -
input_abs_get_max(dev, ABS_X);
if (size == 0)
size = 256 * 2;
tmp = -((value - fy(2)) * 256 * FRACTION_DENOM) / size;
tmp += mousedev->frac_dy;
mousedev->packet.dy = tmp / FRACTION_DENOM;
......@@ -167,33 +173,35 @@ static void mousedev_touchpad_event(struct input_dev *dev,
static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev,
unsigned int code, int value)
{
int size;
int min, max, size;
switch (code) {
case ABS_X:
size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
min = input_abs_get_min(dev, ABS_X);
max = input_abs_get_max(dev, ABS_X);
size = max - min;
if (size == 0)
size = xres ? : 1;
if (value > dev->absmax[ABS_X])
value = dev->absmax[ABS_X];
if (value < dev->absmin[ABS_X])
value = dev->absmin[ABS_X];
mousedev->packet.x =
((value - dev->absmin[ABS_X]) * xres) / size;
clamp(value, min, max);
mousedev->packet.x = ((value - min) * xres) / size;
mousedev->packet.abs_event = 1;
break;
case ABS_Y:
size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
min = input_abs_get_min(dev, ABS_Y);
max = input_abs_get_max(dev, ABS_Y);
size = max - min;
if (size == 0)
size = yres ? : 1;
if (value > dev->absmax[ABS_Y])
value = dev->absmax[ABS_Y];
if (value < dev->absmin[ABS_Y])
value = dev->absmin[ABS_Y];
mousedev->packet.y = yres -
((value - dev->absmin[ABS_Y]) * yres) / size;
clamp(value, min, max);
mousedev->packet.y = yres - ((value - min) * yres) / size;
mousedev->packet.abs_event = 1;
break;
}
......
......@@ -987,20 +987,17 @@ static int aiptek_program_tablet(struct aiptek *aiptek)
/* Query getXextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
return ret;
aiptek->inputdev->absmin[ABS_X] = 0;
aiptek->inputdev->absmax[ABS_X] = ret - 1;
input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
/* Query getYextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
return ret;
aiptek->inputdev->absmin[ABS_Y] = 0;
aiptek->inputdev->absmax[ABS_Y] = ret - 1;
input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
/* Query getPressureLevels */
if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
return ret;
aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
/* Depending on whether we are in absolute or relative mode, we will
* do a switchToTablet(absolute) or switchToMouse(relative) command.
......@@ -1054,8 +1051,8 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr
struct aiptek *aiptek = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
aiptek->inputdev->absmax[ABS_X] + 1,
aiptek->inputdev->absmax[ABS_Y] + 1);
input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
}
/* These structs define the sysfs files, param #1 is the name of the
......@@ -1843,7 +1840,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
aiptek->curSetting.programmableDelay = speeds[i];
(void)aiptek_program_tablet(aiptek);
if (aiptek->inputdev->absmax[ABS_X] > 0) {
if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
dev_info(&intf->dev,
"Aiptek using %d ms programming speed\n",
aiptek->curSetting.programmableDelay);
......
......@@ -686,10 +686,10 @@ static void wacom_tpc_finger_in(struct wacom_wac *wacom, char *data, int idx)
* protocol.
*/
if (wacom->last_finger != finger) {
if (x == input->abs[ABS_X])
if (x == input_abs_get_val(input, ABS_X))
x++;
if (y == input->abs[ABS_Y])
if (y == input_abs_get_val(input, ABS_Y))
y++;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment