Commit 98e238cd authored by Stefan Richter's avatar Stefan Richter

ieee1394: sbp2: don't prefer MODE SENSE 10

In the old days, sbp2 used to coerce all MODE SENSE commands into the
10 bytes version.  When all command set conversions were removed from
sbp2 several months ago, sdev->use_10_for_ms = 1 was added.  Meaning,
higher SCSI layers preferred the 10 bytes version but would try the 6
bytes version if the former failed.

Recently, a problem with the 10 bytes version was discovered.  An Initio
INIC-1530 firmware accepted the 10 bytes version but replied with bogus
data, showing the HDD incorrectly as write-protected.  Since RBC
actually mandates MODE SENSE (6), I checked which version was sent by
Windows XP and Mac OS X 10.3 to an SBP-2 target hosted by Linux --- it
was the 6 bytes version.  (Exception: OS X sent the 10 bytes version to
an MMC target.  RBC and SBC got MODE SENSE (6).)

Therefore, drop the use_10_for_ms flag from sbp2.  Now the upper layers
will try MODE SENSE (6) before MODE SENSE (10) on all SBP-2 devices.
Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
parent a1842be8
......@@ -2528,7 +2528,6 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev)
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
if (sdev->type == TYPE_DISK &&
scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment