Commit 98ed256a authored by John Stultz's avatar John Stultz Committed by Felipe Balbi

usb: dwc3: Add support for role-switch-default-mode binding

Support the new role-switch-default-mode binding for configuring
the default role the controller assumes as when the usb role is
USB_ROLE_NONE

This patch was split out from a larger patch originally by
Yu Chen <chenyu56@huawei.com>

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Guillaume Gardet <Guillaume.Gardet@arm.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Tested-by: default avatarBryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
Signed-off-by: default avatarFelipe Balbi <balbi@kernel.org>
parent dd2d0d1f
......@@ -956,6 +956,8 @@ struct dwc3_scratchpad_array {
* - USBPHY_INTERFACE_MODE_UTMI
* - USBPHY_INTERFACE_MODE_UTMIW
* @role_sw: usb_role_switch handle
* @role_switch_default_mode: default operation mode of controller while
* usb role is USB_ROLE_NONE.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
......@@ -1092,6 +1094,7 @@ struct dwc3 {
struct notifier_block edev_nb;
enum usb_phy_interface hsphy_mode;
struct usb_role_switch *role_sw;
enum usb_dr_mode role_switch_default_mode;
u32 fladj;
u32 irq_gadget;
......
......@@ -491,7 +491,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
mode = DWC3_GCTL_PRTCAP_DEVICE;
break;
default:
mode = DWC3_GCTL_PRTCAP_DEVICE;
if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
mode = DWC3_GCTL_PRTCAP_HOST;
else
mode = DWC3_GCTL_PRTCAP_DEVICE;
break;
}
......@@ -517,7 +520,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
role = dwc->current_otg_role;
break;
default:
role = USB_ROLE_DEVICE;
if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
role = USB_ROLE_HOST;
else
role = USB_ROLE_DEVICE;
break;
}
spin_unlock_irqrestore(&dwc->lock, flags);
......@@ -527,6 +533,19 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
static int dwc3_setup_role_switch(struct dwc3 *dwc)
{
struct usb_role_switch_desc dwc3_role_switch = {NULL};
const char *str;
u32 mode;
int ret;
ret = device_property_read_string(dwc->dev, "role-switch-default-mode",
&str);
if (ret >= 0 && !strncmp(str, "host", strlen("host"))) {
dwc->role_switch_default_mode = USB_DR_MODE_HOST;
mode = DWC3_GCTL_PRTCAP_HOST;
} else {
dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
mode = DWC3_GCTL_PRTCAP_DEVICE;
}
dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
dwc3_role_switch.set = dwc3_usb_role_switch_set;
......@@ -535,7 +554,7 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc)
if (IS_ERR(dwc->role_sw))
return PTR_ERR(dwc->role_sw);
dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
dwc3_set_mode(dwc, mode);
return 0;
}
#else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment