Commit 9914518e authored by Shubhrajyoti Datta's avatar Shubhrajyoti Datta Committed by Jean Delvare

hwmon: (lm75) Add suspend/resume feature

There is a shutdown feature at suspend it can be enabled to
reduce current consumption and resume it can be switched off.
Signed-off-by: default avatarShubhrajyoti Datta <shubhrajyoti@ti.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 960f12f4
...@@ -280,10 +280,49 @@ static int lm75_detect(struct i2c_client *new_client, ...@@ -280,10 +280,49 @@ static int lm75_detect(struct i2c_client *new_client,
return 0; return 0;
} }
#ifdef CONFIG_PM
static int lm75_suspend(struct device *dev)
{
int status;
struct i2c_client *client = to_i2c_client(dev);
status = lm75_read_value(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", status);
return status;
}
status = status | LM75_SHUTDOWN;
lm75_write_value(client, LM75_REG_CONF, status);
return 0;
}
static int lm75_resume(struct device *dev)
{
int status;
struct i2c_client *client = to_i2c_client(dev);
status = lm75_read_value(client, LM75_REG_CONF);
if (status < 0) {
dev_dbg(&client->dev, "Can't read config? %d\n", status);
return status;
}
status = status & ~LM75_SHUTDOWN;
lm75_write_value(client, LM75_REG_CONF, status);
return 0;
}
static const struct dev_pm_ops lm75_dev_pm_ops = {
.suspend = lm75_suspend,
.resume = lm75_resume,
};
#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
#else
#define LM75_DEV_PM_OPS NULL
#endif /* CONFIG_PM */
static struct i2c_driver lm75_driver = { static struct i2c_driver lm75_driver = {
.class = I2C_CLASS_HWMON, .class = I2C_CLASS_HWMON,
.driver = { .driver = {
.name = "lm75", .name = "lm75",
.pm = LM75_DEV_PM_OPS,
}, },
.probe = lm75_probe, .probe = lm75_probe,
.remove = lm75_remove, .remove = lm75_remove,
......
...@@ -30,6 +30,7 @@ ...@@ -30,6 +30,7 @@
/* straight from the datasheet */ /* straight from the datasheet */
#define LM75_TEMP_MIN (-55000) #define LM75_TEMP_MIN (-55000)
#define LM75_TEMP_MAX 125000 #define LM75_TEMP_MAX 125000
#define LM75_SHUTDOWN 0x01
/* TEMP: 0.001C/bit (-55C to +125C) /* TEMP: 0.001C/bit (-55C to +125C)
REG: (0.5C/bit, two's complement) << 7 */ REG: (0.5C/bit, two's complement) << 7 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment