Commit 993af7c0 authored by Axel Lin's avatar Axel Lin Committed by Liam Girdwood

Regulator: lp3972 cleanup

This patch includes below fixes based on Mark's comment.
 - Return actual error if i2c_smbus_read_byte_data() fail
 - Add spaces around bitwise AND operator(&) to improve readability
 - Add comment to explain why we need to update voltage change control register
   for LDO1 and LDO5
 - Logging the value for diagnostics if chip reported incorrect voltage value
 - Add __devinit annotation for setup_regulators()
 - Show system control register1 value if the value is mismatched
 - Logging the value for diagnostics if failed to detect device
Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
Acked-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarLiam Girdwood <lrg@slimlogic.co.uk>
parent 5976f095
......@@ -192,7 +192,7 @@ static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count,
return -EIO;
ret = i2c_smbus_read_byte_data(i2c, reg);
if (ret < 0)
return -EIO;
return ret;
*dest = ret;
return 0;
......@@ -215,7 +215,7 @@ static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg)
lp3972_i2c_read(lp3972->i2c, reg, 1, &val);
dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg,
(unsigned)val&0xff);
(unsigned)val & 0xff);
mutex_unlock(&lp3972->io_lock);
......@@ -234,7 +234,7 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
if (ret == 0) {
ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp);
dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg,
(unsigned)val&0xff);
(unsigned)val & 0xff);
}
mutex_unlock(&lp3972->io_lock);
......@@ -320,6 +320,13 @@ static int lp3972_ldo_set_voltage(struct regulator_dev *dev,
if (ret)
return ret;
/*
* LDO1 and LDO5 support voltage control by either target voltage1
* or target voltage2 register.
* We use target voltage1 register for LDO1 and LDO5 in this driver.
* We need to update voltage change control register(0x20) to enable
* LDO1 and LDO5 to change to their programmed target values.
*/
switch (ldo) {
case LP3972_LDO1:
case LP3972_LDO5:
......@@ -401,7 +408,8 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
val = 1000 * buck_voltage_map[buck][reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
dev_warn(&dev->dev, "chip reported incorrect voltage value."
" reg = %d\n", reg);
}
return val;
......@@ -523,7 +531,7 @@ static struct regulator_desc regulators[] = {
},
};
static int setup_regulators(struct lp3972 *lp3972,
static int __devinit setup_regulators(struct lp3972 *lp3972,
struct lp3972_platform_data *pdata)
{
int i, err;
......@@ -584,10 +592,13 @@ static int __devinit lp3972_i2c_probe(struct i2c_client *i2c,
/* Detect LP3972 */
ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val);
if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL)
if (ret == 0 &&
(val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) {
ret = -ENODEV;
dev_err(&i2c->dev, "chip reported: val = 0x%x\n", val);
}
if (ret < 0) {
dev_err(&i2c->dev, "failed to detect device\n");
dev_err(&i2c->dev, "failed to detect device. ret = %d\n", ret);
goto err_detect;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment