Commit 99c62dd7 authored by Kumar Gala's avatar Kumar Gala Committed by Paul Mackerras

[POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr

A number of users of PPC_MEMSTART (40x, ppc_mmu_32) can just always
use 0 as we don't support booting these kernels at non-zero physical
addresses since their exception vectors must be at 0 (or 0xfffx_xxxx).

For the sub-arches that support relocatable interrupt vectors
(book-e), it's reasonable to have memory start at a non-zero physical
address.  For those cases use the variable memstart_addr instead of
the #define PPC_MEMSTART since the only uses of PPC_MEMSTART are for
initialization and in the future we can set memstart_addr at runtime
to have a relocatable kernel.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 1993cbf4
......@@ -97,7 +97,7 @@ unsigned long __init mmu_mapin_ram(void)
phys_addr_t p;
v = KERNELBASE;
p = PPC_MEMSTART;
p = 0;
s = total_lowmem;
if (__map_without_ltlbs)
......
......@@ -53,13 +53,12 @@
#include <asm/machdep.h>
#include <asm/setup.h>
#include "mmu_decl.h"
extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
unsigned int num_tlbcam_entries;
static unsigned long __cam0, __cam1, __cam2;
extern unsigned long total_lowmem;
extern unsigned long __max_low_memory;
extern unsigned long __initial_memory_limit;
#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
#define NUM_TLBCAMS (16)
......@@ -165,15 +164,15 @@ void invalidate_tlbcam_entry(int index)
void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
unsigned long cam2)
{
settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0);
tlbcam_index++;
if (cam1) {
tlbcam_index++;
settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0);
}
if (cam2) {
tlbcam_index++;
settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0);
}
}
......
......@@ -59,8 +59,8 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long total_memory;
unsigned long total_lowmem;
unsigned long ppc_memstart;
unsigned long ppc_memoffset = PAGE_OFFSET;
phys_addr_t memstart_addr;
phys_addr_t lowmem_end_addr;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
......@@ -145,8 +145,7 @@ void __init MMU_init(void)
printk(KERN_WARNING "Only using first contiguous memory region");
}
total_memory = lmb_end_of_DRAM();
total_lowmem = total_memory;
total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
......
......@@ -51,6 +51,7 @@ extern unsigned long __max_low_memory;
extern unsigned long __initial_memory_limit;
extern unsigned long total_memory;
extern unsigned long total_lowmem;
extern phys_addr_t memstart_addr;
/* ...and now those things that may be slightly different between processor
* architectures. -- Dan
......
......@@ -281,12 +281,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
*/
void __init mapin_ram(void)
{
unsigned long v, p, s, f;
unsigned long v, s, f;
phys_addr_t p;
int ktext;
s = mmu_mapin_ram();
v = KERNELBASE + s;
p = PPC_MEMSTART + s;
p = memstart_addr + s;
for (; s < total_lowmem; s += PAGE_SIZE) {
ktext = ((char *) v >= _stext && (char *) v < etext);
f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
......
......@@ -82,7 +82,6 @@ unsigned long __init mmu_mapin_ram(void)
#else
unsigned long tot, bl, done;
unsigned long max_size = (256<<20);
unsigned long align;
if (__map_without_bats) {
printk(KERN_DEBUG "RAM mapped without BATs\n");
......@@ -93,19 +92,13 @@ unsigned long __init mmu_mapin_ram(void)
/* Make sure we don't map a block larger than the
smallest alignment of the physical address. */
/* alignment of PPC_MEMSTART */
align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
/* set BAT block size to MIN(max_size, align) */
if (align && align < max_size)
max_size = align;
tot = total_lowmem;
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > tot)
break;
}
setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
setbat(2, KERNELBASE, 0, bl, _PAGE_RAM);
done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
if ((done < tot) && !bat_addrs[3].limit) {
/* use BAT3 to cover a bit more */
......@@ -113,7 +106,7 @@ unsigned long __init mmu_mapin_ram(void)
for (bl = 128<<10; bl < max_size; bl <<= 1)
if (bl * 2 > tot)
break;
setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM);
done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
}
......
......@@ -3,8 +3,6 @@
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
#define PPC_MEMSTART 0
#ifdef CONFIG_NOT_COHERENT_CACHE
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment