Commit 9a20795c authored by Jonathan Cameron's avatar Jonathan Cameron

iio: accel: bmi088: Balance runtime pm + use pm_runtime_resume_and_get()

The call to pm_runtime_put_noidle() in remove() is not balanced by a get so
drop it.

Using pm_runtime_resume_and_get() allows for simple introduction of
error handling to allow for runtime resume failing.
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210509113354.660190-13-jic23@kernel.org
parent f3017272
......@@ -285,11 +285,17 @@ static int bmi088_accel_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_TEMP:
pm_runtime_get_sync(dev);
ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;
ret = bmi088_accel_get_temp(data, val);
goto out_read_raw_pm_put;
case IIO_ACCEL:
pm_runtime_get_sync(dev);
ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;
ret = iio_device_claim_direct_mode(indio_dev);
if (ret)
goto out_read_raw_pm_put;
......@@ -319,7 +325,10 @@ static int bmi088_accel_read_raw(struct iio_dev *indio_dev,
*val = BMI088_ACCEL_TEMP_UNIT;
return IIO_VAL_INT;
case IIO_ACCEL:
pm_runtime_get_sync(dev);
ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;
ret = regmap_read(data->regmap,
BMI088_ACCEL_REG_ACC_RANGE, val);
if (ret)
......@@ -334,7 +343,10 @@ static int bmi088_accel_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
case IIO_CHAN_INFO_SAMP_FREQ:
pm_runtime_get_sync(dev);
ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;
ret = bmi088_accel_get_sample_freq(data, val, val2);
goto out_read_raw_pm_put;
default:
......@@ -376,7 +388,10 @@ static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
pm_runtime_get_sync(dev);
ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;
ret = bmi088_accel_set_sample_freq(data, val);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
......@@ -530,7 +545,6 @@ int bmi088_accel_core_remove(struct device *dev)
pm_runtime_disable(dev);
pm_runtime_set_suspended(dev);
pm_runtime_put_noidle(dev);
bmi088_accel_power_down(data);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment