clk: Add support for runtime PM
Registers for some clocks might be located in the SOC area, which are under the power domain. To enable access to those registers respective domain has to be turned on. Additionally, registers for such clocks will usually loose its contents when power domain is turned off, so additional saving and restoring of them might be needed in the clock controller driver. This patch adds basic infrastructure in the clocks core to allow implementing driver for such clocks under power domains. Clock provider can supply a struct device pointer, which is the used by clock core for tracking and managing clock's controller runtime pm state. Each clk_prepare() operation will first call pm_runtime_get_sync() on the supplied device, while clk_unprepare() will do pm_runtime_put_sync() at the end. Additional calls to pm_runtime_get/put functions are required to ensure that any register access (like calculating/changing clock rates and unpreparing/disabling unused clocks on boot) will be done with clock controller in runtime resumend state. When one wants to register clock controller, which make use of this feature, he has to: 1. Provide a struct device to the core when registering the provider. 2. Ensure to enable runtime PM for that device before registering clocks. 3. Make sure that the runtime PM status of the controller device reflects the HW state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com> Link: lkml.kernel.org/r/1503302703-13801-2-git-send-email-m.szyprowski@samsung.com
Showing
Please register or sign in to comment