md/raid5: fix another livelock caused by non-aligned writes.

commit b1b02fe9 upstream.

If a non-page-aligned write is destined for a device which
is missing/faulty, we can deadlock.

As the target device is missing, a read-modify-write cycle
is not possible.
As the write is not for a full-page, a recontruct-write cycle
is not possible.

This should be handled by logic in fetch_block() which notices
there is a non-R5_OVERWRITE write to a missing device, and so
loads all blocks.

However since commit 67f45548, that code requires
STRIPE_PREREAD_ACTIVE before it will active, and those circumstances
never set STRIPE_PREREAD_ACTIVE.

So: in handle_stripe_dirtying, if neither rmw or rcw was possible,
set STRIPE_DELAYED, which will cause STRIPE_PREREAD_ACTIVE be set
after a suitable delay.

Fixes: 67f45548Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>

drivers/md/raid5.c

@@ -3204,6 +3204,11 @@ static void handle_stripe_dirtying(struct r5conf *conf,
 					  (unsigned long long)sh->sector,
 					  rcw, qread, test_bit(STRIPE_DELAYED, &sh->state));
 	}
+
+	if (rcw > disks && rmw > disks &&
+	    !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+		set_bit(STRIPE_DELAYED, &sh->state);
+
 	/* now if nothing is locked, and if we have enough data,
 	 * we can start a write request
 	 */