fs: remove generic_block_fiemap

Remove the now unused generic_block_fiemap helper.

Link: https://lore.kernel.org/r/20210720133341.405438-5-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>

fs/ioctl.c

@@ -263,209 +263,6 @@ static long ioctl_file_clone_range(struct file *file,
 				args.src_length, args.dest_offset);
 }
 
-#ifdef CONFIG_BLOCK
-
-static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
-{
-	return (offset >> inode->i_blkbits);
-}
-
-static inline loff_t blk_to_logical(struct inode *inode, sector_t blk)
-{
-	return (blk << inode->i_blkbits);
-}
-
-/**
- * __generic_block_fiemap - FIEMAP for block based inodes (no locking)
- * @inode: the inode to map
- * @fieinfo: the fiemap info struct that will be passed back to userspace
- * @start: where to start mapping in the inode
- * @len: how much space to map
- * @get_block: the fs's get_block function
- *
- * This does FIEMAP for block based inodes.  Basically it will just loop
- * through get_block until we hit the number of extents we want to map, or we
- * go past the end of the file and hit a hole.
- *
- * If it is possible to have data blocks beyond a hole past @inode->i_size, then
- * please do not use this function, it will stop at the first unmapped block
- * beyond i_size.
- *
- * If you use this function directly, you need to do your own locking. Use
- * generic_block_fiemap if you want the locking done for you.
- */
-static int __generic_block_fiemap(struct inode *inode,
-			   struct fiemap_extent_info *fieinfo, loff_t start,
-			   loff_t len, get_block_t *get_block)
-{
-	struct buffer_head map_bh;
-	sector_t start_blk, last_blk;
-	loff_t isize = i_size_read(inode);
-	u64 logical = 0, phys = 0, size = 0;
-	u32 flags = FIEMAP_EXTENT_MERGED;
-	bool past_eof = false, whole_file = false;
-	int ret = 0;
-
-	ret = fiemap_prep(inode, fieinfo, start, &len, FIEMAP_FLAG_SYNC);
-	if (ret)
-		return ret;
-
-	/*
-	 * Either the i_mutex or other appropriate locking needs to be held
-	 * since we expect isize to not change at all through the duration of
-	 * this call.
-	 */
-	if (len >= isize) {
-		whole_file = true;
-		len = isize;
-	}
-
-	/*
-	 * Some filesystems can't deal with being asked to map less than
-	 * blocksize, so make sure our len is at least block length.
-	 */
-	if (logical_to_blk(inode, len) == 0)
-		len = blk_to_logical(inode, 1);
-
-	start_blk = logical_to_blk(inode, start);
-	last_blk = logical_to_blk(inode, start + len - 1);
-
-	do {
-		/*
-		 * we set b_size to the total size we want so it will map as
-		 * many contiguous blocks as possible at once
-		 */
-		memset(&map_bh, 0, sizeof(struct buffer_head));
-		map_bh.b_size = len;
-
-		ret = get_block(inode, start_blk, &map_bh, 0);
-		if (ret)
-			break;
-
-		/* HOLE */
-		if (!buffer_mapped(&map_bh)) {
-			start_blk++;
-
-			/*
-			 * We want to handle the case where there is an
-			 * allocated block at the front of the file, and then
-			 * nothing but holes up to the end of the file properly,
-			 * to make sure that extent at the front gets properly
-			 * marked with FIEMAP_EXTENT_LAST
-			 */
-			if (!past_eof &&
-			    blk_to_logical(inode, start_blk) >= isize)
-				past_eof = 1;
-
-			/*
-			 * First hole after going past the EOF, this is our
-			 * last extent
-			 */
-			if (past_eof && size) {
-				flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
-				ret = fiemap_fill_next_extent(fieinfo, logical,
-							      phys, size,
-							      flags);
-			} else if (size) {
-				ret = fiemap_fill_next_extent(fieinfo, logical,
-							      phys, size, flags);
-				size = 0;
-			}
-
-			/* if we have holes up to/past EOF then we're done */
-			if (start_blk > last_blk || past_eof || ret)
-				break;
-		} else {
-			/*
-			 * We have gone over the length of what we wanted to
-			 * map, and it wasn't the entire file, so add the extent
-			 * we got last time and exit.
-			 *
-			 * This is for the case where say we want to map all the
-			 * way up to the second to the last block in a file, but
-			 * the last block is a hole, making the second to last
-			 * block FIEMAP_EXTENT_LAST.  In this case we want to
-			 * see if there is a hole after the second to last block
-			 * so we can mark it properly.  If we found data after
-			 * we exceeded the length we were requesting, then we
-			 * are good to go, just add the extent to the fieinfo
-			 * and break
-			 */
-			if (start_blk > last_blk && !whole_file) {
-				ret = fiemap_fill_next_extent(fieinfo, logical,
-							      phys, size,
-							      flags);
-				break;
-			}
-
-			/*
-			 * if size != 0 then we know we already have an extent
-			 * to add, so add it.
-			 */
-			if (size) {
-				ret = fiemap_fill_next_extent(fieinfo, logical,
-							      phys, size,
-							      flags);
-				if (ret)
-					break;
-			}
-
-			logical = blk_to_logical(inode, start_blk);
-			phys = blk_to_logical(inode, map_bh.b_blocknr);
-			size = map_bh.b_size;
-			flags = FIEMAP_EXTENT_MERGED;
-
-			start_blk += logical_to_blk(inode, size);
-
-			/*
-			 * If we are past the EOF, then we need to make sure as
-			 * soon as we find a hole that the last extent we found
-			 * is marked with FIEMAP_EXTENT_LAST
-			 */
-			if (!past_eof && logical + size >= isize)
-				past_eof = true;
-		}
-		cond_resched();
-		if (fatal_signal_pending(current)) {
-			ret = -EINTR;
-			break;
-		}
-
-	} while (1);
-
-	/* If ret is 1 then we just hit the end of the extent array */
-	if (ret == 1)
-		ret = 0;
-
-	return ret;
-}
-
-/**
- * generic_block_fiemap - FIEMAP for block based inodes
- * @inode: The inode to map
- * @fieinfo: The mapping information
- * @start: The initial block to map
- * @len: The length of the extect to attempt to map
- * @get_block: The block mapping function for the fs
- *
- * Calls __generic_block_fiemap to map the inode, after taking
- * the inode's mutex lock.
- */
-
-int generic_block_fiemap(struct inode *inode,
-			 struct fiemap_extent_info *fieinfo, u64 start,
-			 u64 len, get_block_t *get_block)
-{
-	int ret;
-	inode_lock(inode);
-	ret = __generic_block_fiemap(inode, fieinfo, start, len, get_block);
-	inode_unlock(inode);
-	return ret;
-}
-EXPORT_SYMBOL(generic_block_fiemap);
-
-#endif  /*  CONFIG_BLOCK  */
-
 /*
  * This provides compatibility with legacy XFS pre-allocation ioctls
  * which predate the fallocate syscall.

include/linux/fiemap.h

@@ -18,8 +18,4 @@ int fiemap_prep(struct inode *inode, struct fiemap_extent_info *fieinfo,
 int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical,
 			    u64 phys, u64 len, u32 flags);
 
-int generic_block_fiemap(struct inode *inode,
-		struct fiemap_extent_info *fieinfo, u64 start, u64 len,
-		get_block_t *get_block);
-
 #endif /* _LINUX_FIEMAP_H 1 */