Input: ts4800-ts - switch to using polled mode of input devices

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts ts4800-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Link: https://lore.kernel.org/r/20191017204217.106453-4-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/touchscreen/Kconfig

@@ -1037,7 +1037,6 @@ config TOUCHSCREEN_TS4800
 	depends on HAS_IOMEM && OF
 	depends on SOC_IMX51 || COMPILE_TEST
 	select MFD_SYSCON
-	select INPUT_POLLDEV
 	help
 	  Say Y here if you have a touchscreen on a TS-4800 board.
 

drivers/input/touchscreen/ts4800-ts.c

@@ -10,7 +10,6 @@
 
 #include <linux/bitops.h>
 #include <linux/input.h>
-#include <linux/input-polldev.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
@@ -33,7 +32,7 @@
 #define Y_OFFSET		0x2
 
 struct ts4800_ts {
-	struct input_polled_dev *poll_dev;
+	struct input_dev        *input;
 	struct device           *dev;
 	char                    phys[32];
 
@@ -46,22 +45,26 @@ struct ts4800_ts {
 	int                     debounce;
 };
 
-static void ts4800_ts_open(struct input_polled_dev *dev)
+static int ts4800_ts_open(struct input_dev *input_dev)
 {
-	struct ts4800_ts *ts = dev->private;
-	int ret;
+	struct ts4800_ts *ts = input_get_drvdata(input_dev);
+	int error;
 
 	ts->pendown = false;
 	ts->debounce = DEBOUNCE_COUNT;
 
-	ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit);
-	if (ret)
-		dev_warn(ts->dev, "Failed to enable touchscreen\n");
+	error = regmap_update_bits(ts->regmap, ts->reg, ts->bit, ts->bit);
+	if (error) {
+		dev_warn(ts->dev, "Failed to enable touchscreen: %d\n", error);
+		return error;
+	}
+
+	return 0;
 }
 
-static void ts4800_ts_close(struct input_polled_dev *dev)
+static void ts4800_ts_close(struct input_dev *input_dev)
 {
-	struct ts4800_ts *ts = dev->private;
+	struct ts4800_ts *ts = input_get_drvdata(input_dev);
 	int ret;
 
 	ret = regmap_update_bits(ts->regmap, ts->reg, ts->bit, 0);
@@ -70,10 +73,9 @@ static void ts4800_ts_close(struct input_polled_dev *dev)
 
 }
 
-static void ts4800_ts_poll(struct input_polled_dev *dev)
+static void ts4800_ts_poll(struct input_dev *input_dev)
 {
-	struct input_dev *input_dev = dev->input;
-	struct ts4800_ts *ts = dev->private;
+	struct ts4800_ts *ts = input_get_drvdata(input_dev);
 	u16 last_x = readw(ts->base + X_OFFSET);
 	u16 last_y = readw(ts->base + Y_OFFSET);
 	bool pendown = last_x & PENDOWN_MASK;
@@ -146,7 +148,7 @@ static int ts4800_parse_dt(struct platform_device *pdev,
 
 static int ts4800_ts_probe(struct platform_device *pdev)
 {
-	struct input_polled_dev *poll_dev;
+	struct input_dev *input_dev;
 	struct ts4800_ts *ts;
 	int error;
 
@@ -162,32 +164,38 @@ static int ts4800_ts_probe(struct platform_device *pdev)
 	if (IS_ERR(ts->base))
 		return PTR_ERR(ts->base);
 
-	poll_dev = devm_input_allocate_polled_device(&pdev->dev);
-	if (!poll_dev)
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
 		return -ENOMEM;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&pdev->dev));
-	ts->poll_dev = poll_dev;
+	ts->input = input_dev;
 	ts->dev = &pdev->dev;
 
-	poll_dev->private = ts;
-	poll_dev->poll_interval = POLL_INTERVAL;
-	poll_dev->open = ts4800_ts_open;
-	poll_dev->close = ts4800_ts_close;
-	poll_dev->poll = ts4800_ts_poll;
+	input_set_drvdata(input_dev, ts);
+
+	input_dev->name = "TS-4800 Touchscreen";
+	input_dev->phys = ts->phys;
+
+	input_dev->open = ts4800_ts_open;
+	input_dev->close = ts4800_ts_close;
+
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
 
-	poll_dev->input->name = "TS-4800 Touchscreen";
-	poll_dev->input->phys = ts->phys;
+	error = input_setup_polling(input_dev, ts4800_ts_poll);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to set up polling: %d\n", error);
+		return error;
+	}
 
-	input_set_capability(poll_dev->input, EV_KEY, BTN_TOUCH);
-	input_set_abs_params(poll_dev->input, ABS_X, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(poll_dev->input, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_poll_interval(input_dev, POLL_INTERVAL);
 
-	error = input_register_polled_device(poll_dev);
+	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&pdev->dev,
-			"Unabled to register polled input device (%d)\n",
-			error);
+			"Unable to register input device: %d\n", error);
 		return error;
 	}