net: sparx5: clean up sparx5_phylink_validate()

sparx5_phylink_validate() no longer needs to check for
PHY_INTERFACE_MODE_NA as phylink will walk the supported interface
types to discover the link mode capabilities. Neither is it necessary
to check the device capabilities as we will not be called for
unsupported interface modes. Remove these checks.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c

@@ -30,7 +30,6 @@ static void sparx5_phylink_validate(struct phylink_config *config,
 				    unsigned long *supported,
 				    struct phylink_link_state *state)
 {
-	struct sparx5_port *port = netdev_priv(to_net_dev(config->dev));
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 
 	phylink_set(mask, Autoneg);
@@ -40,34 +39,23 @@ static void sparx5_phylink_validate(struct phylink_config *config,
 
 	switch (state->interface) {
 	case PHY_INTERFACE_MODE_5GBASER:
+		phylink_set(mask, 5000baseT_Full);
+		break;
+
 	case PHY_INTERFACE_MODE_10GBASER:
+		phylink_set(mask, 10000baseT_Full);
+		phylink_set(mask, 10000baseCR_Full);
+		phylink_set(mask, 10000baseSR_Full);
+		phylink_set(mask, 10000baseLR_Full);
+		phylink_set(mask, 10000baseLRM_Full);
+		phylink_set(mask, 10000baseER_Full);
+		break;
+
 	case PHY_INTERFACE_MODE_25GBASER:
-	case PHY_INTERFACE_MODE_NA:
-		if (port->conf.bandwidth == SPEED_5000)
-			phylink_set(mask, 5000baseT_Full);
-		if (port->conf.bandwidth == SPEED_10000) {
-			phylink_set(mask, 5000baseT_Full);
-			phylink_set(mask, 10000baseT_Full);
-			phylink_set(mask, 10000baseCR_Full);
-			phylink_set(mask, 10000baseSR_Full);
-			phylink_set(mask, 10000baseLR_Full);
-			phylink_set(mask, 10000baseLRM_Full);
-			phylink_set(mask, 10000baseER_Full);
-		}
-		if (port->conf.bandwidth == SPEED_25000) {
-			phylink_set(mask, 5000baseT_Full);
-			phylink_set(mask, 10000baseT_Full);
-			phylink_set(mask, 10000baseCR_Full);
-			phylink_set(mask, 10000baseSR_Full);
-			phylink_set(mask, 10000baseLR_Full);
-			phylink_set(mask, 10000baseLRM_Full);
-			phylink_set(mask, 10000baseER_Full);
-			phylink_set(mask, 25000baseCR_Full);
-			phylink_set(mask, 25000baseSR_Full);
-		}
-		if (state->interface != PHY_INTERFACE_MODE_NA)
-			break;
-		fallthrough;
+		phylink_set(mask, 25000baseCR_Full);
+		phylink_set(mask, 25000baseSR_Full);
+		break;
+
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 		phylink_set(mask, 10baseT_Half);
@@ -76,21 +64,18 @@ static void sparx5_phylink_validate(struct phylink_config *config,
 		phylink_set(mask, 100baseT_Full);
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseX_Full);
-		if (state->interface != PHY_INTERFACE_MODE_NA)
-			break;
-		fallthrough;
+		break;
+
 	case PHY_INTERFACE_MODE_1000BASEX:
+		phylink_set(mask, 1000baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
+		break;
+
 	case PHY_INTERFACE_MODE_2500BASEX:
-		if (state->interface != PHY_INTERFACE_MODE_2500BASEX) {
-			phylink_set(mask, 1000baseT_Full);
-			phylink_set(mask, 1000baseX_Full);
-		}
-		if (state->interface == PHY_INTERFACE_MODE_2500BASEX ||
-		    state->interface == PHY_INTERFACE_MODE_NA) {
-			phylink_set(mask, 2500baseT_Full);
-			phylink_set(mask, 2500baseX_Full);
-		}
+		phylink_set(mask, 2500baseT_Full);
+		phylink_set(mask, 2500baseX_Full);
 		break;
+
 	default:
 		linkmode_zero(supported);
 		return;