ARM: imx: enable suspend for imx6sl

The imx6sl low power mode implementation inherits imx6q/dl one,
and pm-imx6q.c can just work for imx6sl with some minor updates.
Let's enable imx6sl suspend support by reusing pm-imx6q.c and use
cpu_is_imxXX() to handle the those minor differences between imx6sl
and imx6q/dl.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/mach-imx/Makefile

@@ -102,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
+# i.MX6SL reuses pm-imx6q.c
+obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o
 endif
 
 # i.MX5 based machines

arch/arm/mach-imx/clk-imx6sl.c

@@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
+	/* Reuse imx6q pm code */
+	imx6q_pm_set_ccm_base(base);
+
 	/*                                              name                reg       shift width parent_names     num_parents */
 	clks[IMX6SL_CLK_STEP]             = imx_clk_mux("step",             base + 0xc,  8,  1, step_sels,         ARRAY_SIZE(step_sels));
 	clks[IMX6SL_CLK_PLL1_SW]          = imx_clk_mux("pll1_sw",          base + 0xc,  2,  1, pll1_sw_sels,      ARRAY_SIZE(pll1_sw_sels));

arch/arm/mach-imx/mach-imx6sl.c

@@ -47,6 +47,9 @@ static void __init imx6sl_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx6sl_fec_init();
+	imx_anatop_init();
+	/* Reuse imx6q pm code */
+	imx6q_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)

arch/arm/mach-imx/mxc.h

@@ -153,6 +153,11 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6sl(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6SL;
+}
+
 static inline bool cpu_is_imx6dl(void)
 {
 	return __mxc_cpu_type == MXC_CPU_IMX6DL;

arch/arm/mach-imx/pm-imx6q.c

@@ -144,6 +144,12 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
+		if (cpu_is_imx6sl()) {
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+		} else {
+			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		}
 		break;
 	default:
 		return -EINVAL;
@@ -181,7 +187,8 @@ static int imx6q_pm_enter(suspend_state_t state)
 		imx_set_cpu_jump(0, v7_cpu_resume);
 		/* Zzz ... */
 		cpu_suspend(0, imx6q_suspend_finish);
-		imx_smp_prepare();
+		if (cpu_is_imx6q() || cpu_is_imx6dl())
+			imx_smp_prepare();
 		imx_anatop_post_resume();
 		imx_gpc_post_resume();
 		imx6q_enable_rbc(false);