Commit 9baf2de7 authored by Marco Chiappero's avatar Marco Chiappero Committed by Herbert Xu

crypto: qat - differentiate between pf2vf and vf2pf offset

Add the function get_vf2pf_offset() to adf_pfvf_ops to differentiate the
CSRs used for pf2vf and vf2pf.

Offsets may or may not be direction specific depending on QAT
generation. Since in QAT GEN2 the CSR is not direction specific, i.e.
there is a single mailbox register shared for pf2vf and vf2pf, both
get_vf2pf_offset() and get_vf2pf_offset() will return the same offset.

This change is to make the direction explicit, so it is easier to
understand and debug and also in preparation for the introduction of
PFVF support in the qat_4xxx driver since QAT GEN4 devices have a
separate CSR for pf2vf and vf2pf communications.
Signed-off-by: default avatarMarco Chiappero <marco.chiappero@intel.com>
Reviewed-by: default avatarGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: default avatarGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent bc63dabe
......@@ -150,6 +150,7 @@ struct adf_etr_ring_data;
struct adf_pfvf_ops {
int (*enable_comms)(struct adf_accel_dev *accel_dev);
u32 (*get_pf2vf_offset)(u32 i);
u32 (*get_vf2pf_offset)(u32 i);
u32 (*get_vf2pf_sources)(void __iomem *pmisc_addr);
void (*enable_vf2pf_interrupts)(void __iomem *pmisc_addr, u32 vf_mask);
void (*disable_vf2pf_interrupts)(void __iomem *pmisc_addr, u32 vf_mask);
......
......@@ -12,12 +12,12 @@
#define ADF_GEN2_PF_PF2VF_OFFSET(i) (0x3A000 + 0x280 + ((i) * 0x04))
#define ADF_GEN2_VF_PF2VF_OFFSET 0x200
static u32 adf_gen2_pf_get_pf2vf_offset(u32 i)
static u32 adf_gen2_pf_get_pfvf_offset(u32 i)
{
return ADF_GEN2_PF_PF2VF_OFFSET(i);
}
static u32 adf_gen2_vf_get_pf2vf_offset(u32 i)
static u32 adf_gen2_vf_get_pfvf_offset(u32 i)
{
return ADF_GEN2_VF_PF2VF_OFFSET;
}
......@@ -64,7 +64,8 @@ static void adf_gen2_disable_vf2pf_interrupts(void __iomem *pmisc_addr,
void adf_gen2_init_pf_pfvf_ops(struct adf_pfvf_ops *pfvf_ops)
{
pfvf_ops->enable_comms = adf_enable_pf2vf_comms;
pfvf_ops->get_pf2vf_offset = adf_gen2_pf_get_pf2vf_offset;
pfvf_ops->get_pf2vf_offset = adf_gen2_pf_get_pfvf_offset;
pfvf_ops->get_vf2pf_offset = adf_gen2_pf_get_pfvf_offset;
pfvf_ops->get_vf2pf_sources = adf_gen2_get_vf2pf_sources;
pfvf_ops->enable_vf2pf_interrupts = adf_gen2_enable_vf2pf_interrupts;
pfvf_ops->disable_vf2pf_interrupts = adf_gen2_disable_vf2pf_interrupts;
......@@ -74,6 +75,7 @@ EXPORT_SYMBOL_GPL(adf_gen2_init_pf_pfvf_ops);
void adf_gen2_init_vf_pfvf_ops(struct adf_pfvf_ops *pfvf_ops)
{
pfvf_ops->enable_comms = adf_enable_vf2pf_comms;
pfvf_ops->get_pf2vf_offset = adf_gen2_vf_get_pf2vf_offset;
pfvf_ops->get_pf2vf_offset = adf_gen2_vf_get_pfvf_offset;
pfvf_ops->get_vf2pf_offset = adf_gen2_vf_get_pfvf_offset;
}
EXPORT_SYMBOL_GPL(adf_gen2_init_vf_pfvf_ops);
......@@ -29,7 +29,7 @@ static int adf_iov_putmsg(struct adf_accel_dev *accel_dev, u32 msg, u8 vf_nr)
int ret;
if (accel_dev->is_vf) {
pf2vf_offset = hw_data->pfvf_ops.get_pf2vf_offset(0);
pf2vf_offset = hw_data->pfvf_ops.get_vf2pf_offset(0);
lock = &accel_dev->vf.vf2pf_lock;
local_in_use_mask = ADF_VF2PF_IN_USE_BY_VF_MASK;
local_in_use_pattern = ADF_VF2PF_IN_USE_BY_VF;
......@@ -258,7 +258,7 @@ bool adf_recv_and_handle_vf2pf_msg(struct adf_accel_dev *accel_dev, u32 vf_nr)
u32 msg, resp = 0;
/* Read message from the VF */
msg = ADF_CSR_RD(pmisc_addr, hw_data->pfvf_ops.get_pf2vf_offset(vf_nr));
msg = ADF_CSR_RD(pmisc_addr, hw_data->pfvf_ops.get_vf2pf_offset(vf_nr));
if (!(msg & ADF_VF2PF_INT)) {
dev_info(&GET_DEV(accel_dev),
"Spurious VF2PF interrupt, msg %X. Ignored\n", msg);
......@@ -275,7 +275,7 @@ bool adf_recv_and_handle_vf2pf_msg(struct adf_accel_dev *accel_dev, u32 vf_nr)
/* To ACK, clear the VF2PFINT bit */
msg &= ~ADF_VF2PF_INT;
ADF_CSR_WR(pmisc_addr, hw_data->pfvf_ops.get_pf2vf_offset(vf_nr), msg);
ADF_CSR_WR(pmisc_addr, hw_data->pfvf_ops.get_vf2pf_offset(vf_nr), msg);
if (adf_handle_vf2pf_msg(accel_dev, vf_nr, msg, &resp))
return false;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment