Merge tag 'linux-can-next-for-5.13-20210330' of...

Merge tag 'linux-can-next-for-5.13-20210330' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2021-03-30

this is a pull request of 39 patches for net-next/master.

The first two patches update the MAINTAINERS file. One is by me and
removes Dan Murphy from the from m_can and tcan4x5x. The other one is
by Pankaj Sharma and updates the maintainership of the m-can mmio
driver.

The next three patches are by me and update the CAN echo skb handling.

Vincent Mailhol provides 5 patches where Transmitter Delay
Compensation is added CAN bittiming calculation is cleaned up.

The next patch is by me and adds a missing HAS_IOMEM to the grcan
driver.

Michal Simek's patch for the xilinx driver add dev_err_probe()
support.

Arnd Bergmann's patch for the ucan driver fixes a compiler warning.

Stephane Grosjean provides 3 patches for the peak USB drivers, which
add ethtool set_phys_id and CAN one-shot mode.

Xulin Sun's patch removes a not needed return check in the m-can
driver. Torin Cooper-Bennun provides 3 patches for the m-can driver
that add rx-offload support to ensure that skbs are sent from softirq
context. Wan Jiabing's patch for the tcan4x5x driver removes a
duplicate include.

The next 6 patches are by me and target the mcp251xfd driver. They add
devcoredump support, simplify the UINC handling, and add HW timestamp
support.

The remaining 12 patches target the c_can driver. The first 6 are by
me and do generic checkpatch related cleanup work. Dario Binacchi's
patches bring some cleanups and increase the number of usable message
objects from 16 to 64.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -10910,8 +10910,7 @@ T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-maxiradio*
 
 MCAN MMIO DEVICE DRIVER
-M:	Dan Murphy <dmurphy@ti.com>
-M:	Pankaj Sharma <pankj.sharma@samsung.com>
+M:	Chandrasekar Ramakrishnan <rcsekar@samsung.com>
 L:	linux-can@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -17983,13 +17982,6 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Odd Fixes
 F:	sound/soc/codecs/tas571x*
 
-TI TCAN4X5X DEVICE DRIVER
-M:	Dan Murphy <dmurphy@ti.com>
-L:	linux-can@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/net/can/tcan4x5x.txt
-F:	drivers/net/can/m_can/tcan4x5x*
-
 TI TRF7970A NFC DRIVER
 M:	Mark Greer <mgreer@animalcreek.com>
 L:	linux-wireless@vger.kernel.org

drivers/net/can/Kconfig

@@ -103,7 +103,7 @@ config CAN_FLEXCAN
 
 config CAN_GRCAN
 	tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
-	depends on OF && HAS_DMA
+	depends on OF && HAS_DMA && HAS_IOMEM
 	help
 	  Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
 	  Note that the driver supports little endian, even though little

drivers/net/can/c_can/c_can.h

@@ -22,23 +22,6 @@
 #ifndef C_CAN_H
 #define C_CAN_H
 
-/* message object split */
-#define C_CAN_NO_OF_OBJECTS	32
-#define C_CAN_MSG_OBJ_RX_NUM	16
-#define C_CAN_MSG_OBJ_TX_NUM	16
-
-#define C_CAN_MSG_OBJ_RX_FIRST	1
-#define C_CAN_MSG_OBJ_RX_LAST	(C_CAN_MSG_OBJ_RX_FIRST + \
-				C_CAN_MSG_OBJ_RX_NUM - 1)
-
-#define C_CAN_MSG_OBJ_TX_FIRST	(C_CAN_MSG_OBJ_RX_LAST + 1)
-#define C_CAN_MSG_OBJ_TX_LAST	(C_CAN_MSG_OBJ_TX_FIRST + \
-				C_CAN_MSG_OBJ_TX_NUM - 1)
-
-#define C_CAN_MSG_OBJ_RX_SPLIT	9
-#define C_CAN_MSG_RX_LOW_LAST	(C_CAN_MSG_OBJ_RX_SPLIT - 1)
-#define RECEIVE_OBJECT_BITS	0x0000ffff
-
 enum reg {
 	C_CAN_CTRL_REG = 0,
 	C_CAN_CTRL_EX_REG,
@@ -76,6 +59,7 @@ enum reg {
 	C_CAN_NEWDAT2_REG,
 	C_CAN_INTPND1_REG,
 	C_CAN_INTPND2_REG,
+	C_CAN_INTPND3_REG,
 	C_CAN_MSGVAL1_REG,
 	C_CAN_MSGVAL2_REG,
 	C_CAN_FUNCTION_REG,
@@ -137,6 +121,7 @@ static const u16 __maybe_unused reg_map_d_can[] = {
 	[C_CAN_NEWDAT2_REG]	= 0x9E,
 	[C_CAN_INTPND1_REG]	= 0xB0,
 	[C_CAN_INTPND2_REG]	= 0xB2,
+	[C_CAN_INTPND3_REG]	= 0xB4,
 	[C_CAN_MSGVAL1_REG]	= 0xC4,
 	[C_CAN_MSGVAL2_REG]	= 0xC6,
 	[C_CAN_IF1_COMREQ_REG]	= 0x100,
@@ -176,6 +161,7 @@ struct raminit_bits {
 
 struct c_can_driver_data {
 	enum c_can_dev_id id;
+	unsigned int msg_obj_num;
 
 	/* RAMINIT register description. Optional. */
 	const struct raminit_bits *raminit_bits; /* Array of START/DONE bit positions */
@@ -197,26 +183,34 @@ struct c_can_priv {
 	struct napi_struct napi;
 	struct net_device *dev;
 	struct device *device;
+	unsigned int msg_obj_num;
+	unsigned int msg_obj_rx_num;
+	unsigned int msg_obj_tx_num;
+	unsigned int msg_obj_rx_first;
+	unsigned int msg_obj_rx_last;
+	unsigned int msg_obj_tx_first;
+	unsigned int msg_obj_tx_last;
+	u32 msg_obj_rx_mask;
 	atomic_t tx_active;
 	atomic_t sie_pending;
 	unsigned long tx_dir;
 	int last_status;
-	u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);
-	void (*write_reg) (const struct c_can_priv *priv, enum reg index, u16 val);
-	u32 (*read_reg32) (const struct c_can_priv *priv, enum reg index);
-	void (*write_reg32) (const struct c_can_priv *priv, enum reg index, u32 val);
+	u16 (*read_reg)(const struct c_can_priv *priv, enum reg index);
+	void (*write_reg)(const struct c_can_priv *priv, enum reg index, u16 val);
+	u32 (*read_reg32)(const struct c_can_priv *priv, enum reg index);
+	void (*write_reg32)(const struct c_can_priv *priv, enum reg index, u32 val);
 	void __iomem *base;
 	const u16 *regs;
 	void *priv;		/* for board-specific data */
 	enum c_can_dev_id type;
 	struct c_can_raminit raminit_sys;	/* RAMINIT via syscon regmap */
-	void (*raminit) (const struct c_can_priv *priv, bool enable);
+	void (*raminit)(const struct c_can_priv *priv, bool enable);
 	u32 comm_rcv_high;
 	u32 rxmasked;
-	u32 dlc[C_CAN_MSG_OBJ_TX_NUM];
+	u32 dlc[];
 };
 
-struct net_device *alloc_c_can_dev(void);
+struct net_device *alloc_c_can_dev(int msg_obj_num);
 void free_c_can_dev(struct net_device *dev);
 int register_c_can_dev(struct net_device *dev);
 void unregister_c_can_dev(struct net_device *dev);

drivers/net/can/c_can/c_can_pci.c

@@ -31,6 +31,8 @@ enum c_can_pci_reg_align {
 struct c_can_pci_data {
 	/* Specify if is C_CAN or D_CAN */
 	enum c_can_dev_id type;
+	/* Number of message objects */
+	unsigned int msg_obj_num;
 	/* Set the register alignment in the memory */
 	enum c_can_pci_reg_align reg_align;
 	/* Set the frequency */
@@ -41,32 +43,31 @@ struct c_can_pci_data {
 	void (*init)(const struct c_can_priv *priv, bool enable);
 };
 
-/*
- * 16-bit c_can registers can be arranged differently in the memory
+/* 16-bit c_can registers can be arranged differently in the memory
  * architecture of different implementations. For example: 16-bit
  * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
  * Handle the same by providing a common read/write interface.
  */
 static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
-						enum reg index)
+					       enum reg index)
 {
 	return readw(priv->base + priv->regs[index]);
 }
 
 static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
-						enum reg index, u16 val)
+						 enum reg index, u16 val)
 {
 	writew(val, priv->base + priv->regs[index]);
 }
 
 static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
-						enum reg index)
+					       enum reg index)
 {
 	return readw(priv->base + 2 * priv->regs[index]);
 }
 
 static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
-						enum reg index, u16 val)
+						 enum reg index, u16 val)
 {
 	writew(val, priv->base + 2 * priv->regs[index]);
 }
@@ -88,13 +89,13 @@ static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
 	u32 val;
 
 	val = priv->read_reg(priv, index);
-	val |= ((u32) priv->read_reg(priv, index + 1)) << 16;
+	val |= ((u32)priv->read_reg(priv, index + 1)) << 16;
 
 	return val;
 }
 
 static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
-		u32 val)
+				  u32 val)
 {
 	priv->write_reg(priv, index + 1, val >> 16);
 	priv->write_reg(priv, index, val);
@@ -142,14 +143,13 @@ static int c_can_pci_probe(struct pci_dev *pdev,
 			 pci_resource_len(pdev, c_can_pci_data->bar));
 	if (!addr) {
 		dev_err(&pdev->dev,
-			"device has no PCI memory resources, "
-			"failing adapter\n");
+			"device has no PCI memory resources, failing adapter\n");
 		ret = -ENOMEM;
 		goto out_release_regions;
 	}
 
 	/* allocate the c_can device */
-	dev = alloc_c_can_dev();
+	dev = alloc_c_can_dev(c_can_pci_data->msg_obj_num);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto out_iounmap;
@@ -217,7 +217,7 @@ static int c_can_pci_probe(struct pci_dev *pdev,
 	}
 
 	dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
-		 KBUILD_MODNAME, priv->regs, dev->irq);
+		KBUILD_MODNAME, priv->regs, dev->irq);
 
 	return 0;
 
@@ -252,8 +252,9 @@ static void c_can_pci_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static const struct c_can_pci_data c_can_sta2x11= {
+static const struct c_can_pci_data c_can_sta2x11 = {
 	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
 	.reg_align = C_CAN_REG_ALIGN_32,
 	.freq = 52000000, /* 52 Mhz */
 	.bar = 0,
@@ -261,6 +262,7 @@ static const struct c_can_pci_data c_can_sta2x11= {
 
 static const struct c_can_pci_data c_can_pch = {
 	.type = BOSCH_C_CAN,
+	.msg_obj_num = 32,
 	.reg_align = C_CAN_REG_32,
 	.freq = 50000000, /* 50 MHz */
 	.init = c_can_pci_reset_pch,
@@ -269,7 +271,7 @@ static const struct c_can_pci_data c_can_pch = {
 
 #define C_CAN_ID(_vend, _dev, _driverdata) {		\
 	PCI_DEVICE(_vend, _dev),			\
-	.driver_data = (unsigned long)&_driverdata,	\
+	.driver_data = (unsigned long)&(_driverdata),	\
 }
 
 static const struct pci_device_id c_can_pci_tbl[] = {
@@ -279,6 +281,7 @@ static const struct pci_device_id c_can_pci_tbl[] = {
 		 c_can_pch),
 	{},
 };
+
 static struct pci_driver c_can_pci_driver = {
 	.name = KBUILD_MODNAME,
 	.id_table = c_can_pci_tbl,

drivers/net/can/c_can/c_can_platform.c

@@ -193,10 +193,12 @@ static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
 
 static const struct c_can_driver_data c_can_drvdata = {
 	.id = BOSCH_C_CAN,
+	.msg_obj_num = 32,
 };
 
 static const struct c_can_driver_data d_can_drvdata = {
 	.id = BOSCH_D_CAN,
+	.msg_obj_num = 32,
 };
 
 static const struct raminit_bits dra7_raminit_bits[] = {
@@ -206,6 +208,7 @@ static const struct raminit_bits dra7_raminit_bits[] = {
 
 static const struct c_can_driver_data dra7_dcan_drvdata = {
 	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
 	.raminit_num = ARRAY_SIZE(dra7_raminit_bits),
 	.raminit_bits = dra7_raminit_bits,
 	.raminit_pulse = true,
@@ -218,6 +221,7 @@ static const struct raminit_bits am3352_raminit_bits[] = {
 
 static const struct c_can_driver_data am3352_dcan_drvdata = {
 	.id = BOSCH_D_CAN,
+	.msg_obj_num = 64,
 	.raminit_num = ARRAY_SIZE(am3352_raminit_bits),
 	.raminit_bits = am3352_raminit_bits,
 };
@@ -294,7 +298,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
 	}
 
 	/* allocate the c_can device */
-	dev = alloc_c_can_dev();
+	dev = alloc_c_can_dev(drvdata->msg_obj_num);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto exit;

drivers/net/can/dev/bittiming.c

@@ -81,9 +81,9 @@ int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 	if (bt->sample_point) {
 		sample_point_nominal = bt->sample_point;
 	} else {
-		if (bt->bitrate > 800000)
+		if (bt->bitrate > 800 * CAN_KBPS)
 			sample_point_nominal = 750;
-		else if (bt->bitrate > 500000)
+		else if (bt->bitrate > 500 * CAN_KBPS)
 			sample_point_nominal = 800;
 		else
 			sample_point_nominal = 875;
@@ -174,6 +174,30 @@ int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 
 	return 0;
 }
+
+void can_calc_tdco(struct net_device *dev)
+{
+	struct can_priv *priv = netdev_priv(dev);
+	const struct can_bittiming *dbt = &priv->data_bittiming;
+	struct can_tdc *tdc = &priv->tdc;
+	const struct can_tdc_const *tdc_const = priv->tdc_const;
+
+	if (!tdc_const)
+		return;
+
+	/* As specified in ISO 11898-1 section 11.3.3 "Transmitter
+	 * delay compensation" (TDC) is only applicable if data BRP is
+	 * one or two.
+	 */
+	if (dbt->brp == 1 || dbt->brp == 2) {
+		/* Reuse "normal" sample point and convert it to time quanta */
+		u32 sample_point_in_tq = can_bit_time(dbt) * dbt->sample_point / 1000;
+
+		tdc->tdco = min(sample_point_in_tq, tdc_const->tdco_max);
+	} else {
+		tdc->tdco = 0;
+	}
+}
 #endif /* CONFIG_CAN_CALC_BITTIMING */
 
 /* Checks the validity of the specified bit-timing parameters prop_seg,

drivers/net/can/dev/netlink.c

@@ -8,20 +8,17 @@
 #include <net/rtnetlink.h>
 
 static const struct nla_policy can_policy[IFLA_CAN_MAX + 1] = {
-	[IFLA_CAN_STATE]	= { .type = NLA_U32 },
-	[IFLA_CAN_CTRLMODE]	= { .len = sizeof(struct can_ctrlmode) },
-	[IFLA_CAN_RESTART_MS]	= { .type = NLA_U32 },
-	[IFLA_CAN_RESTART]	= { .type = NLA_U32 },
-	[IFLA_CAN_BITTIMING]	= { .len = sizeof(struct can_bittiming) },
-	[IFLA_CAN_BITTIMING_CONST]
-				= { .len = sizeof(struct can_bittiming_const) },
-	[IFLA_CAN_CLOCK]	= { .len = sizeof(struct can_clock) },
-	[IFLA_CAN_BERR_COUNTER]	= { .len = sizeof(struct can_berr_counter) },
-	[IFLA_CAN_DATA_BITTIMING]
-				= { .len = sizeof(struct can_bittiming) },
-	[IFLA_CAN_DATA_BITTIMING_CONST]
-				= { .len = sizeof(struct can_bittiming_const) },
-	[IFLA_CAN_TERMINATION]	= { .type = NLA_U16 },
+	[IFLA_CAN_STATE] = { .type = NLA_U32 },
+	[IFLA_CAN_CTRLMODE] = { .len = sizeof(struct can_ctrlmode) },
+	[IFLA_CAN_RESTART_MS] = { .type = NLA_U32 },
+	[IFLA_CAN_RESTART] = { .type = NLA_U32 },
+	[IFLA_CAN_BITTIMING] = { .len = sizeof(struct can_bittiming) },
+	[IFLA_CAN_BITTIMING_CONST] = { .len = sizeof(struct can_bittiming_const) },
+	[IFLA_CAN_CLOCK] = { .len = sizeof(struct can_clock) },
+	[IFLA_CAN_BERR_COUNTER] = { .len = sizeof(struct can_berr_counter) },
+	[IFLA_CAN_DATA_BITTIMING] = { .len = sizeof(struct can_bittiming) },
+	[IFLA_CAN_DATA_BITTIMING_CONST]	= { .len = sizeof(struct can_bittiming_const) },
+	[IFLA_CAN_TERMINATION] = { .type = NLA_U16 },
 };
 
 static int can_validate(struct nlattr *tb[], struct nlattr *data[],
@@ -189,6 +186,8 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 
 		memcpy(&priv->data_bittiming, &dbt, sizeof(dbt));
 
+		can_calc_tdco(dev);
+
 		if (priv->do_set_data_bittiming) {
 			/* Finally, set the bit-timing registers */
 			err = priv->do_set_data_bittiming(dev);

drivers/net/can/dev/skb.c

@@ -45,7 +45,7 @@ int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 	BUG_ON(idx >= priv->echo_skb_max);
 
 	/* check flag whether this packet has to be looped back */
-	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK ||
+	if (!(dev->flags & IFF_ECHO) ||
 	    (skb->protocol != htons(ETH_P_CAN) &&
 	     skb->protocol != htons(ETH_P_CANFD))) {
 		kfree_skb(skb);
@@ -58,7 +58,6 @@ int can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
 			return -ENOMEM;
 
 		/* make settings for echo to reduce code in irq context */
-		skb->pkt_type = PACKET_BROADCAST;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 		skb->dev = dev;
 
@@ -111,6 +110,13 @@ __can_get_echo_skb(struct net_device *dev, unsigned int idx, u8 *len_ptr,
 
 		priv->echo_skb[idx] = NULL;
 
+		if (skb->pkt_type == PACKET_LOOPBACK) {
+			skb->pkt_type = PACKET_BROADCAST;
+		} else {
+			dev_consume_skb_any(skb);
+			return NULL;
+		}
+
 		return skb;
 	}
 
@@ -147,14 +153,25 @@ EXPORT_SYMBOL_GPL(can_get_echo_skb);
  *
  * The function is typically called when TX failed.
  */
-void can_free_echo_skb(struct net_device *dev, unsigned int idx)
+void can_free_echo_skb(struct net_device *dev, unsigned int idx,
+		       unsigned int *frame_len_ptr)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
-	BUG_ON(idx >= priv->echo_skb_max);
+	if (idx >= priv->echo_skb_max) {
+		netdev_err(dev, "%s: BUG! Trying to access can_priv::echo_skb out of bounds (%u/max %u)\n",
+			   __func__, idx, priv->echo_skb_max);
+		return;
+	}
 
 	if (priv->echo_skb[idx]) {
-		dev_kfree_skb_any(priv->echo_skb[idx]);
+		struct sk_buff *skb = priv->echo_skb[idx];
+		struct can_skb_priv *can_skb_priv = can_skb_prv(skb);
+
+		if (frame_len_ptr)
+			*frame_len_ptr = can_skb_priv->frame_len;
+
+		dev_kfree_skb_any(skb);
 		priv->echo_skb[idx] = NULL;
 	}
 }

drivers/net/can/grcan.c

@@ -520,7 +520,7 @@ static int catch_up_echo_skb(struct net_device *dev, int budget, bool echo)
 			can_get_echo_skb(dev, i, NULL);
 		} else {
 			/* For cleanup of untransmitted messages */
-			can_free_echo_skb(dev, i);
+			can_free_echo_skb(dev, i, NULL);
 		}
 
 		priv->eskbp = grcan_ring_add(priv->eskbp, GRCAN_MSG_SIZE,

drivers/net/can/m_can/m_can.h

@@ -8,6 +8,7 @@
 
 #include <linux/can/core.h>
 #include <linux/can/led.h>
+#include <linux/can/rx-offload.h>
 #include <linux/completion.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
@@ -71,6 +72,7 @@ struct m_can_ops {
 
 struct m_can_classdev {
 	struct can_priv can;
+	struct can_rx_offload offload;
 	struct napi_struct napi;
 	struct net_device *net;
 	struct device *dev;

drivers/net/can/m_can/tcan4x5x.h

@@ -11,7 +11,6 @@
 
 #include <linux/gpio/consumer.h>
 #include <linux/regmap.h>
-#include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 

drivers/net/can/rcar/rcar_can.c

@@ -217,7 +217,7 @@ static void tx_failure_cleanup(struct net_device *ndev)
 	int i;
 
 	for (i = 0; i < RCAR_CAN_FIFO_DEPTH; i++)
-		can_free_echo_skb(ndev, i);
+		can_free_echo_skb(ndev, i, NULL);
 }
 
 static void rcar_can_error(struct net_device *ndev)

drivers/net/can/rcar/rcar_canfd.c

@@ -617,7 +617,7 @@ static void rcar_canfd_tx_failure_cleanup(struct net_device *ndev)
 	u32 i;
 
 	for (i = 0; i < RCANFD_FIFO_DEPTH; i++)
-		can_free_echo_skb(ndev, i);
+		can_free_echo_skb(ndev, i, NULL);
 }
 
 static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)

drivers/net/can/sja1000/sja1000.c

@@ -525,7 +525,7 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
 			if (priv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT &&
 			    !(status & SR_TCS)) {
 				stats->tx_errors++;
-				can_free_echo_skb(dev, 0);
+				can_free_echo_skb(dev, 0, NULL);
 			} else {
 				/* transmission complete */
 				stats->tx_bytes +=

drivers/net/can/spi/hi311x.c

@@ -179,7 +179,7 @@ static void hi3110_clean(struct net_device *net)
 		net->stats.tx_errors++;
 	dev_kfree_skb(priv->tx_skb);
 	if (priv->tx_len)
-		can_free_echo_skb(priv->net, 0);
+		can_free_echo_skb(priv->net, 0, NULL);
 	priv->tx_skb = NULL;
 	priv->tx_len = 0;
 }

drivers/net/can/spi/mcp251x.c

@@ -276,7 +276,7 @@ static void mcp251x_clean(struct net_device *net)
 		net->stats.tx_errors++;
 	dev_kfree_skb(priv->tx_skb);
 	if (priv->tx_len)
-		can_free_echo_skb(priv->net, 0);
+		can_free_echo_skb(priv->net, 0, NULL);
 	priv->tx_skb = NULL;
 	priv->tx_len = 0;
 }

drivers/net/can/spi/mcp251xfd/Kconfig

@@ -3,6 +3,7 @@
 config CAN_MCP251XFD
 	tristate "Microchip MCP251xFD SPI CAN controllers"
 	select REGMAP
+	select WANT_DEV_COREDUMP
 	help
 	  Driver for the Microchip MCP251XFD SPI FD-CAN controller
 	  family.

drivers/net/can/spi/mcp251xfd/Makefile

@@ -6,3 +6,6 @@ mcp251xfd-objs :=
 mcp251xfd-objs += mcp251xfd-core.o
 mcp251xfd-objs += mcp251xfd-crc16.o
 mcp251xfd-objs += mcp251xfd-regmap.o
+mcp251xfd-objs += mcp251xfd-timestamp.o
+
+mcp251xfd-$(CONFIG_DEV_COREDUMP) += mcp251xfd-dump.o

drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c

@@ -2,8 +2,8 @@
 //
 // mcp251xfd - Microchip MCP251xFD Family CAN controller driver
 //
-// Copyright (c) 2019, 2020 Pengutronix,
-//                          Marc Kleine-Budde <kernel@pengutronix.de>
+// Copyright (c) 2019, 2020, 2021 Pengutronix,
+//               Marc Kleine-Budde <kernel@pengutronix.de>
 //
 // Based on:
 //
@@ -16,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/module.h>
-#include <linux/netdevice.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
@@ -330,6 +329,7 @@ static void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
 	struct mcp251xfd_tx_ring *tx_ring;
 	struct mcp251xfd_rx_ring *rx_ring, *prev_rx_ring = NULL;
 	struct mcp251xfd_tx_obj *tx_obj;
+	struct spi_transfer *xfer;
 	u32 val;
 	u16 addr;
 	u8 len;
@@ -347,8 +347,6 @@ static void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
 					      addr, val, val);
 
 	for (j = 0; j < ARRAY_SIZE(tef_ring->uinc_xfer); j++) {
-		struct spi_transfer *xfer;
-
 		xfer = &tef_ring->uinc_xfer[j];
 		xfer->tx_buf = &tef_ring->uinc_buf;
 		xfer->len = len;
@@ -357,6 +355,15 @@ static void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
 		xfer->cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
 	}
 
+	/* "cs_change == 1" on the last transfer results in an active
+	 * chip select after the complete SPI message. This causes the
+	 * controller to interpret the next register access as
+	 * data. Set "cs_change" of the last transfer to "0" to
+	 * properly deactivate the chip select at the end of the
+	 * message.
+	 */
+	xfer->cs_change = 0;
+
 	/* TX */
 	tx_ring = priv->tx;
 	tx_ring->head = 0;
@@ -397,8 +404,6 @@ static void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
 						      addr, val, val);
 
 		for (j = 0; j < ARRAY_SIZE(rx_ring->uinc_xfer); j++) {
-			struct spi_transfer *xfer;
-
 			xfer = &rx_ring->uinc_xfer[j];
 			xfer->tx_buf = &rx_ring->uinc_buf;
 			xfer->len = len;
@@ -406,6 +411,15 @@ static void mcp251xfd_ring_init(struct mcp251xfd_priv *priv)
 			xfer->cs_change_delay.value = 0;
 			xfer->cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;
 		}
+
+		/* "cs_change == 1" on the last transfer results in an
+		 * active chip select after the complete SPI
+		 * message. This causes the controller to interpret
+		 * the next register access as data. Set "cs_change"
+		 * of the last transfer to "0" to properly deactivate
+		 * the chip select at the end of the message.
+		 */
+		xfer->cs_change = 0;
 	}
 }
 
@@ -1097,6 +1111,7 @@ static int mcp251xfd_chip_start(struct mcp251xfd_priv *priv)
 	return 0;
 
  out_chip_stop:
+	mcp251xfd_dump(priv);
 	mcp251xfd_chip_stop(priv, CAN_STATE_STOPPED);
 
 	return err;
@@ -1250,7 +1265,8 @@ mcp251xfd_handle_tefif_one(struct mcp251xfd_priv *priv,
 			   const struct mcp251xfd_hw_tef_obj *hw_tef_obj)
 {
 	struct net_device_stats *stats = &priv->ndev->stats;
-	u32 seq, seq_masked, tef_tail_masked;
+	struct sk_buff *skb;
+	u32 seq, seq_masked, tef_tail_masked, tef_tail;
 
 	seq = FIELD_GET(MCP251XFD_OBJ_FLAGS_SEQ_MCP2518FD_MASK,
 			hw_tef_obj->flags);
@@ -1266,9 +1282,13 @@ mcp251xfd_handle_tefif_one(struct mcp251xfd_priv *priv,
 	if (seq_masked != tef_tail_masked)
 		return mcp251xfd_handle_tefif_recover(priv, seq);
 
+	tef_tail = mcp251xfd_get_tef_tail(priv);
+	skb = priv->can.echo_skb[tef_tail];
+	if (skb)
+		mcp251xfd_skb_set_timestamp(priv, skb, hw_tef_obj->ts);
 	stats->tx_bytes +=
 		can_rx_offload_get_echo_skb(&priv->offload,
-					    mcp251xfd_get_tef_tail(priv),
+					    tef_tail,
 					    hw_tef_obj->ts, NULL);
 	stats->tx_packets++;
 	priv->tef->tail++;
@@ -1365,25 +1385,20 @@ static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
 	if (len) {
 		struct mcp251xfd_tef_ring *ring = priv->tef;
 		struct mcp251xfd_tx_ring *tx_ring = priv->tx;
-		struct spi_transfer *last_xfer;
+		int offset;
 
 		/* Increment the TEF FIFO tail pointer 'len' times in
 		 * a single SPI message.
 		 *
 		 * Note:
-		 *
-		 * "cs_change == 1" on the last transfer results in an
-		 * active chip select after the complete SPI
-		 * message. This causes the controller to interpret
-		 * the next register access as data. Temporary set
-		 * "cs_change" of the last transfer to "0" to properly
-		 * deactivate the chip select at the end of the
-		 * message.
+		 * Calculate offset, so that the SPI transfer ends on
+		 * the last message of the uinc_xfer array, which has
+		 * "cs_change == 0", to properly deactivate the chip
+		 * select.
 		 */
-		last_xfer = &ring->uinc_xfer[len - 1];
-		last_xfer->cs_change = 0;
-		err = spi_sync_transfer(priv->spi, ring->uinc_xfer, len);
-		last_xfer->cs_change = 1;
+		offset = ARRAY_SIZE(ring->uinc_xfer) - len;
+		err = spi_sync_transfer(priv->spi,
+					ring->uinc_xfer + offset, len);
 		if (err)
 			return err;
 
@@ -1432,7 +1447,7 @@ mcp251xfd_rx_ring_update(const struct mcp251xfd_priv *priv,
 }
 
 static void
-mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
+mcp251xfd_hw_rx_obj_to_skb(struct mcp251xfd_priv *priv,
 			   const struct mcp251xfd_hw_rx_obj_canfd *hw_rx_obj,
 			   struct sk_buff *skb)
 {
@@ -1475,6 +1490,8 @@ mcp251xfd_hw_rx_obj_to_skb(const struct mcp251xfd_priv *priv,
 
 	if (!(hw_rx_obj->flags & MCP251XFD_OBJ_FLAGS_RTR))
 		memcpy(cfd->data, hw_rx_obj->data, cfd->len);
+
+	mcp251xfd_skb_set_timestamp(priv, skb, hw_rx_obj->ts);
 }
 
 static int
@@ -1535,7 +1552,7 @@ mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv,
 		return err;
 
 	while ((len = mcp251xfd_get_rx_linear_len(ring))) {
-		struct spi_transfer *last_xfer;
+		int offset;
 
 		rx_tail = mcp251xfd_get_rx_tail(ring);
 
@@ -1556,19 +1573,14 @@ mcp251xfd_handle_rxif_ring(struct mcp251xfd_priv *priv,
 		 * single SPI message.
 		 *
 		 * Note:
-		 *
-		 * "cs_change == 1" on the last transfer results in an
-		 * active chip select after the complete SPI
-		 * message. This causes the controller to interpret
-		 * the next register access as data. Temporary set
-		 * "cs_change" of the last transfer to "0" to properly
-		 * deactivate the chip select at the end of the
-		 * message.
+		 * Calculate offset, so that the SPI transfer ends on
+		 * the last message of the uinc_xfer array, which has
+		 * "cs_change == 0", to properly deactivate the chip
+		 * select.
 		 */
-		last_xfer = &ring->uinc_xfer[len - 1];
-		last_xfer->cs_change = 0;
-		err = spi_sync_transfer(priv->spi, ring->uinc_xfer, len);
-		last_xfer->cs_change = 1;
+		offset = ARRAY_SIZE(ring->uinc_xfer) - len;
+		err = spi_sync_transfer(priv->spi,
+					ring->uinc_xfer + offset, len);
 		if (err)
 			return err;
 
@@ -1592,23 +1604,22 @@ static int mcp251xfd_handle_rxif(struct mcp251xfd_priv *priv)
 	return 0;
 }
 
-static inline int mcp251xfd_get_timestamp(const struct mcp251xfd_priv *priv,
-					  u32 *timestamp)
-{
-	return regmap_read(priv->map_reg, MCP251XFD_REG_TBC, timestamp);
-}
-
 static struct sk_buff *
-mcp251xfd_alloc_can_err_skb(const struct mcp251xfd_priv *priv,
+mcp251xfd_alloc_can_err_skb(struct mcp251xfd_priv *priv,
 			    struct can_frame **cf, u32 *timestamp)
 {
+	struct sk_buff *skb;
 	int err;
 
 	err = mcp251xfd_get_timestamp(priv, timestamp);
 	if (err)
 		return NULL;
 
-	return alloc_can_err_skb(priv->ndev, cf);
+	skb = alloc_can_err_skb(priv->ndev, cf);
+	if (skb)
+		mcp251xfd_skb_set_timestamp(priv, skb, *timestamp);
+
+	return skb;
 }
 
 static int mcp251xfd_handle_rxovif(struct mcp251xfd_priv *priv)
@@ -1760,6 +1771,7 @@ static int mcp251xfd_handle_ivmif(struct mcp251xfd_priv *priv)
 	if (!cf)
 		return 0;
 
+	mcp251xfd_skb_set_timestamp(priv, skb, timestamp);
 	err = can_rx_offload_queue_sorted(&priv->offload, skb, timestamp);
 	if (err)
 		stats->rx_fifo_errors++;
@@ -2277,6 +2289,7 @@ static irqreturn_t mcp251xfd_irq(int irq, void *dev_id)
  out_fail:
 	netdev_err(priv->ndev, "IRQ handler returned %d (intf=0x%08x).\n",
 		   err, priv->regs_status.intf);
+	mcp251xfd_dump(priv);
 	mcp251xfd_chip_interrupts_disable(priv);
 
 	return handled;
@@ -2493,6 +2506,7 @@ static int mcp251xfd_open(struct net_device *ndev)
 	if (err)
 		goto out_transceiver_disable;
 
+	mcp251xfd_timestamp_init(priv);
 	can_rx_offload_enable(&priv->offload);
 
 	err = request_threaded_irq(spi->irq, NULL, mcp251xfd_irq,
@@ -2513,6 +2527,7 @@ static int mcp251xfd_open(struct net_device *ndev)
 	free_irq(spi->irq, priv);
  out_can_rx_offload_disable:
 	can_rx_offload_disable(&priv->offload);
+	mcp251xfd_timestamp_stop(priv);
  out_transceiver_disable:
 	mcp251xfd_transceiver_disable(priv);
  out_mcp251xfd_ring_free:
@@ -2534,6 +2549,7 @@ static int mcp251xfd_stop(struct net_device *ndev)
 	mcp251xfd_chip_interrupts_disable(priv);
 	free_irq(ndev->irq, priv);
 	can_rx_offload_disable(&priv->offload);
+	mcp251xfd_timestamp_stop(priv);
 	mcp251xfd_chip_stop(priv, CAN_STATE_STOPPED);
 	mcp251xfd_transceiver_disable(priv);
 	mcp251xfd_ring_free(priv);

drivers/net/can/spi/mcp251xfd/mcp251xfd-dump.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// mcp251xfd - Microchip MCP251xFD Family CAN controller driver
+//
+// Copyright (c) 2020, 2021 Pengutronix,
+//               Marc Kleine-Budde <kernel@pengutronix.de>
+// Copyright (C) 2015-2018 Etnaviv Project
+//
+
+#include <linux/devcoredump.h>
+
+#include "mcp251xfd.h"
+#include "mcp251xfd-dump.h"
+
+struct mcp251xfd_dump_iter {
+	void *start;
+	struct mcp251xfd_dump_object_header *hdr;
+	void *data;
+};
+
+struct mcp251xfd_dump_reg_space {
+	u16 base;
+	u16 size;
+};
+
+struct mcp251xfd_dump_ring {
+	enum mcp251xfd_dump_object_ring_key key;
+	u32 val;
+};
+
+static const struct mcp251xfd_dump_reg_space mcp251xfd_dump_reg_space[] = {
+	{
+		.base = MCP251XFD_REG_CON,
+		.size = MCP251XFD_REG_FLTOBJ(32) - MCP251XFD_REG_CON,
+	}, {
+		.base = MCP251XFD_RAM_START,
+		.size = MCP251XFD_RAM_SIZE,
+	}, {
+		.base = MCP251XFD_REG_OSC,
+		.size = MCP251XFD_REG_DEVID - MCP251XFD_REG_OSC,
+	},
+};
+
+static void mcp251xfd_dump_header(struct mcp251xfd_dump_iter *iter,
+				  enum mcp251xfd_dump_object_type object_type,
+				  const void *data_end)
+{
+	struct mcp251xfd_dump_object_header *hdr = iter->hdr;
+	unsigned int len;
+
+	len = data_end - iter->data;
+	if (!len)
+		return;
+
+	hdr->magic = cpu_to_le32(MCP251XFD_DUMP_MAGIC);
+	hdr->type = cpu_to_le32(object_type);
+	hdr->offset = cpu_to_le32(iter->data - iter->start);
+	hdr->len = cpu_to_le32(len);
+
+	iter->hdr++;
+	iter->data += len;
+}
+
+static void mcp251xfd_dump_registers(const struct mcp251xfd_priv *priv,
+				     struct mcp251xfd_dump_iter *iter)
+{
+	const int val_bytes = regmap_get_val_bytes(priv->map_rx);
+	struct mcp251xfd_dump_object_reg *reg = iter->data;
+	unsigned int i, j;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(mcp251xfd_dump_reg_space); i++) {
+		const struct mcp251xfd_dump_reg_space *reg_space;
+		void *buf;
+
+		reg_space = &mcp251xfd_dump_reg_space[i];
+
+		buf = kmalloc(reg_space->size, GFP_KERNEL);
+		if (!buf)
+			goto out;
+
+		err = regmap_bulk_read(priv->map_reg, reg_space->base,
+				       buf, reg_space->size / val_bytes);
+		if (err) {
+			kfree(buf);
+			continue;
+		}
+
+		for (j = 0; j < reg_space->size; j += sizeof(u32), reg++) {
+			reg->reg = cpu_to_le32(reg_space->base + j);
+			reg->val = cpu_to_le32p(buf + j);
+		}
+
+		kfree(buf);
+	}
+
+ out:
+	mcp251xfd_dump_header(iter, MCP251XFD_DUMP_OBJECT_TYPE_REG, reg);
+}
+
+static void mcp251xfd_dump_ring(struct mcp251xfd_dump_iter *iter,
+				enum mcp251xfd_dump_object_type object_type,
+				const struct mcp251xfd_dump_ring *dump_ring,
+				unsigned int len)
+{
+	struct mcp251xfd_dump_object_reg *reg = iter->data;
+	unsigned int i;
+
+	for (i = 0; i < len; i++, reg++) {
+		reg->reg = cpu_to_le32(dump_ring[i].key);
+		reg->val = cpu_to_le32(dump_ring[i].val);
+	}
+
+	mcp251xfd_dump_header(iter, object_type, reg);
+}
+
+static void mcp251xfd_dump_tef_ring(const struct mcp251xfd_priv *priv,
+				    struct mcp251xfd_dump_iter *iter)
+{
+	const struct mcp251xfd_tef_ring *tef = priv->tef;
+	const struct mcp251xfd_tx_ring *tx = priv->tx;
+	const struct mcp251xfd_dump_ring dump_ring[] = {
+		{
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_HEAD,
+			.val = tef->head,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_TAIL,
+			.val = tef->tail,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_BASE,
+			.val = 0,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_NR,
+			.val = 0,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_FIFO_NR,
+			.val = 0,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_NUM,
+			.val = tx->obj_num,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_SIZE,
+			.val = sizeof(struct mcp251xfd_hw_tef_obj),
+		},
+	};
+
+	mcp251xfd_dump_ring(iter, MCP251XFD_DUMP_OBJECT_TYPE_TEF,
+			    dump_ring, ARRAY_SIZE(dump_ring));
+}
+
+static void mcp251xfd_dump_rx_ring_one(const struct mcp251xfd_priv *priv,
+				       struct mcp251xfd_dump_iter *iter,
+				       const struct mcp251xfd_rx_ring *rx)
+{
+	const struct mcp251xfd_dump_ring dump_ring[] = {
+		{
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_HEAD,
+			.val = rx->head,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_TAIL,
+			.val = rx->tail,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_BASE,
+			.val = rx->base,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_NR,
+			.val = rx->nr,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_FIFO_NR,
+			.val = rx->fifo_nr,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_NUM,
+			.val = rx->obj_num,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_SIZE,
+			.val = rx->obj_size,
+		},
+	};
+
+	mcp251xfd_dump_ring(iter, MCP251XFD_DUMP_OBJECT_TYPE_RX,
+			    dump_ring, ARRAY_SIZE(dump_ring));
+}
+
+static void mcp251xfd_dump_rx_ring(const struct mcp251xfd_priv *priv,
+				   struct mcp251xfd_dump_iter *iter)
+{
+	struct mcp251xfd_rx_ring *rx_ring;
+	unsigned int i;
+
+	mcp251xfd_for_each_rx_ring(priv, rx_ring, i)
+		mcp251xfd_dump_rx_ring_one(priv, iter, rx_ring);
+}
+
+static void mcp251xfd_dump_tx_ring(const struct mcp251xfd_priv *priv,
+				   struct mcp251xfd_dump_iter *iter)
+{
+	const struct mcp251xfd_tx_ring *tx = priv->tx;
+	const struct mcp251xfd_dump_ring dump_ring[] = {
+		{
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_HEAD,
+			.val = tx->head,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_TAIL,
+			.val = tx->tail,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_BASE,
+			.val = tx->base,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_NR,
+			.val = 0,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_FIFO_NR,
+			.val = MCP251XFD_TX_FIFO,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_NUM,
+			.val = tx->obj_num,
+		}, {
+			.key = MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_SIZE,
+			.val = tx->obj_size,
+		},
+	};
+
+	mcp251xfd_dump_ring(iter, MCP251XFD_DUMP_OBJECT_TYPE_TX,
+			    dump_ring, ARRAY_SIZE(dump_ring));
+}
+
+static void mcp251xfd_dump_end(const struct mcp251xfd_priv *priv,
+			       struct mcp251xfd_dump_iter *iter)
+{
+	struct mcp251xfd_dump_object_header *hdr = iter->hdr;
+
+	hdr->magic = cpu_to_le32(MCP251XFD_DUMP_MAGIC);
+	hdr->type = cpu_to_le32(MCP251XFD_DUMP_OBJECT_TYPE_END);
+	hdr->offset = cpu_to_le32(0);
+	hdr->len = cpu_to_le32(0);
+
+	/* provoke NULL pointer access, if used after END object */
+	iter->hdr = NULL;
+}
+
+void mcp251xfd_dump(const struct mcp251xfd_priv *priv)
+{
+	struct mcp251xfd_dump_iter iter;
+	unsigned int rings_num, obj_num;
+	unsigned int file_size = 0;
+	unsigned int i;
+
+	/* register space + end marker */
+	obj_num = 2;
+
+	/* register space */
+	for (i = 0; i < ARRAY_SIZE(mcp251xfd_dump_reg_space); i++)
+		file_size += mcp251xfd_dump_reg_space[i].size / sizeof(u32) *
+			sizeof(struct mcp251xfd_dump_object_reg);
+
+	/* TEF ring, RX ring, TX rings */
+	rings_num = 1 + priv->rx_ring_num + 1;
+	obj_num += rings_num;
+	file_size += rings_num * __MCP251XFD_DUMP_OBJECT_RING_KEY_MAX  *
+		sizeof(struct mcp251xfd_dump_object_reg);
+
+	/* size of the headers */
+	file_size += sizeof(*iter.hdr) * obj_num;
+
+	/* allocate the file in vmalloc memory, it's likely to be big */
+	iter.start = __vmalloc(file_size, GFP_KERNEL | __GFP_NOWARN |
+			       __GFP_ZERO | __GFP_NORETRY);
+	if (!iter.start) {
+		netdev_warn(priv->ndev, "Failed to allocate devcoredump file.\n");
+		return;
+	}
+
+	/* point the data member after the headers */
+	iter.hdr = iter.start;
+	iter.data = &iter.hdr[obj_num];
+
+	mcp251xfd_dump_registers(priv, &iter);
+	mcp251xfd_dump_tef_ring(priv, &iter);
+	mcp251xfd_dump_rx_ring(priv, &iter);
+	mcp251xfd_dump_tx_ring(priv, &iter);
+	mcp251xfd_dump_end(priv, &iter);
+
+	dev_coredumpv(&priv->spi->dev, iter.start,
+		      iter.data - iter.start, GFP_KERNEL);
+}

drivers/net/can/spi/mcp251xfd/mcp251xfd-dump.h

+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * mcp251xfd - Microchip MCP251xFD Family CAN controller driver
+ *
+ * Copyright (c) 2019, 2020, 2021 Pengutronix,
+ *               Marc Kleine-Budde <kernel@pengutronix.de>
+ */
+
+#ifndef _MCP251XFD_DUMP_H
+#define _MCP251XFD_DUMP_H
+
+#define MCP251XFD_DUMP_MAGIC 0x1825434d
+
+enum mcp251xfd_dump_object_type {
+	MCP251XFD_DUMP_OBJECT_TYPE_REG,
+	MCP251XFD_DUMP_OBJECT_TYPE_TEF,
+	MCP251XFD_DUMP_OBJECT_TYPE_RX,
+	MCP251XFD_DUMP_OBJECT_TYPE_TX,
+	MCP251XFD_DUMP_OBJECT_TYPE_END = -1,
+};
+
+enum mcp251xfd_dump_object_ring_key {
+	MCP251XFD_DUMP_OBJECT_RING_KEY_HEAD,
+	MCP251XFD_DUMP_OBJECT_RING_KEY_TAIL,
+	MCP251XFD_DUMP_OBJECT_RING_KEY_BASE,
+	MCP251XFD_DUMP_OBJECT_RING_KEY_NR,
+	MCP251XFD_DUMP_OBJECT_RING_KEY_FIFO_NR,
+	MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_NUM,
+	MCP251XFD_DUMP_OBJECT_RING_KEY_OBJ_SIZE,
+	__MCP251XFD_DUMP_OBJECT_RING_KEY_MAX,
+};
+
+struct mcp251xfd_dump_object_header {
+	__le32 magic;
+	__le32 type;
+	__le32 offset;
+	__le32 len;
+};
+
+struct mcp251xfd_dump_object_reg {
+	__le32 reg;
+	__le32 val;
+};
+
+#endif

drivers/net/can/spi/mcp251xfd/mcp251xfd-timestamp.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// mcp251xfd - Microchip MCP251xFD Family CAN controller driver
+//
+// Copyright (c) 2021 Pengutronix,
+//               Marc Kleine-Budde <kernel@pengutronix.de>
+//
+
+#include <linux/clocksource.h>
+#include <linux/workqueue.h>
+
+#include "mcp251xfd.h"
+
+static u64 mcp251xfd_timestamp_read(const struct cyclecounter *cc)
+{
+	struct mcp251xfd_priv *priv;
+	u32 timestamp = 0;
+	int err;
+
+	priv = container_of(cc, struct mcp251xfd_priv, cc);
+	err = mcp251xfd_get_timestamp(priv, &timestamp);
+	if (err)
+		netdev_err(priv->ndev,
+			   "Error %d while reading timestamp. HW timestamps may be inaccurate.",
+			   err);
+
+	return timestamp;
+}
+
+static void mcp251xfd_timestamp_work(struct work_struct *work)
+{
+	struct delayed_work *delayed_work = to_delayed_work(work);
+	struct mcp251xfd_priv *priv;
+
+	priv = container_of(delayed_work, struct mcp251xfd_priv, timestamp);
+	timecounter_read(&priv->tc);
+
+	schedule_delayed_work(&priv->timestamp,
+			      MCP251XFD_TIMESTAMP_WORK_DELAY_SEC * HZ);
+}
+
+void mcp251xfd_skb_set_timestamp(struct mcp251xfd_priv *priv,
+				 struct sk_buff *skb, u32 timestamp)
+{
+	struct skb_shared_hwtstamps *hwtstamps = skb_hwtstamps(skb);
+	u64 ns;
+
+	ns = timecounter_cyc2time(&priv->tc, timestamp);
+	hwtstamps->hwtstamp = ns_to_ktime(ns);
+}
+
+void mcp251xfd_timestamp_init(struct mcp251xfd_priv *priv)
+{
+	struct cyclecounter *cc = &priv->cc;
+
+	cc->read = mcp251xfd_timestamp_read;
+	cc->mask = CYCLECOUNTER_MASK(32);
+	cc->shift = 1;
+	cc->mult = clocksource_hz2mult(priv->can.clock.freq, cc->shift);
+
+	timecounter_init(&priv->tc, &priv->cc, ktime_get_real_ns());
+
+	INIT_DELAYED_WORK(&priv->timestamp, mcp251xfd_timestamp_work);
+	schedule_delayed_work(&priv->timestamp,
+			      MCP251XFD_TIMESTAMP_WORK_DELAY_SEC * HZ);
+}
+
+void mcp251xfd_timestamp_stop(struct mcp251xfd_priv *priv)
+{
+	cancel_delayed_work_sync(&priv->timestamp);
+}

drivers/net/can/spi/mcp251xfd/mcp251xfd.h

@@ -15,9 +15,12 @@
 #include <linux/can/rx-offload.h>
 #include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
+#include <linux/netdevice.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
+#include <linux/timecounter.h>
+#include <linux/workqueue.h>
 
 /* MPC251x registers */
 
@@ -394,6 +397,9 @@
 #define MCP251XFD_SYSCLOCK_HZ_MAX 40000000
 #define MCP251XFD_SYSCLOCK_HZ_MIN 1000000
 #define MCP251XFD_SPICLOCK_HZ_MAX 20000000
+#define MCP251XFD_TIMESTAMP_WORK_DELAY_SEC 45
+static_assert(MCP251XFD_TIMESTAMP_WORK_DELAY_SEC <
+	      CYCLECOUNTER_MASK(32) / MCP251XFD_SYSCLOCK_HZ_MAX / 2);
 #define MCP251XFD_OSC_PLL_MULTIPLIER 10
 #define MCP251XFD_OSC_STAB_SLEEP_US (3 * USEC_PER_MSEC)
 #define MCP251XFD_OSC_STAB_TIMEOUT_US (10 * MCP251XFD_OSC_STAB_SLEEP_US)
@@ -595,6 +601,10 @@ struct mcp251xfd_priv {
 	struct mcp251xfd_ecc ecc;
 	struct mcp251xfd_regs_status regs_status;
 
+	struct cyclecounter cc;
+	struct timecounter tc;
+	struct delayed_work timestamp;
+
 	struct gpio_desc *rx_int;
 	struct clk *clk;
 	struct regulator *reg_vdd;
@@ -727,6 +737,12 @@ mcp251xfd_spi_cmd_write(const struct mcp251xfd_priv *priv,
 	return data;
 }
 
+static inline int mcp251xfd_get_timestamp(const struct mcp251xfd_priv *priv,
+					  u32 *timestamp)
+{
+	return regmap_read(priv->map_reg, MCP251XFD_REG_TBC, timestamp);
+}
+
 static inline u16 mcp251xfd_get_tef_obj_addr(u8 n)
 {
 	return MCP251XFD_RAM_START +
@@ -837,5 +853,17 @@ int mcp251xfd_regmap_init(struct mcp251xfd_priv *priv);
 u16 mcp251xfd_crc16_compute2(const void *cmd, size_t cmd_size,
 			     const void *data, size_t data_size);
 u16 mcp251xfd_crc16_compute(const void *data, size_t data_size);
+void mcp251xfd_skb_set_timestamp(struct mcp251xfd_priv *priv,
+				 struct sk_buff *skb, u32 timestamp);
+void mcp251xfd_timestamp_init(struct mcp251xfd_priv *priv);
+void mcp251xfd_timestamp_stop(struct mcp251xfd_priv *priv);
+
+#if IS_ENABLED(CONFIG_DEV_COREDUMP)
+void mcp251xfd_dump(const struct mcp251xfd_priv *priv);
+#else
+static inline void mcp251xfd_dump(const struct mcp251xfd_priv *priv)
+{
+}
+#endif
 
 #endif

drivers/net/can/usb/ems_usb.c

@@ -807,7 +807,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (unlikely(err)) {
-		can_free_echo_skb(netdev, context->echo_index);
+		can_free_echo_skb(netdev, context->echo_index, NULL);
 
 		usb_unanchor_urb(urb);
 		usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);

drivers/net/can/usb/esd_usb2.c

@@ -360,7 +360,7 @@ static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
 		can_get_echo_skb(netdev, context->echo_index, NULL);
 	} else {
 		stats->tx_errors++;
-		can_free_echo_skb(netdev, context->echo_index);
+		can_free_echo_skb(netdev, context->echo_index, NULL);
 	}
 
 	/* Release context */
@@ -793,7 +793,7 @@ static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err) {
-		can_free_echo_skb(netdev, context->echo_index);
+		can_free_echo_skb(netdev, context->echo_index, NULL);
 
 		atomic_dec(&priv->active_tx_jobs);
 		usb_unanchor_urb(urb);

drivers/net/can/usb/gs_usb.c

@@ -533,7 +533,7 @@ static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
 	if (unlikely(rc)) {			/* usb send failed */
 		atomic_dec(&dev->active_tx_urbs);
 
-		can_free_echo_skb(netdev, idx);
+		can_free_echo_skb(netdev, idx, NULL);
 		gs_free_tx_context(txc);
 
 		usb_unanchor_urb(urb);

drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

@@ -593,7 +593,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 	if (unlikely(err)) {
 		spin_lock_irqsave(&priv->tx_contexts_lock, flags);
 
-		can_free_echo_skb(netdev, context->echo_index);
+		can_free_echo_skb(netdev, context->echo_index, NULL);
 		context->echo_index = dev->max_tx_urbs;
 		--priv->active_tx_contexts;
 		netif_wake_queue(netdev);

drivers/net/can/usb/mcba_usb.c

@@ -364,7 +364,7 @@ static netdev_tx_t mcba_usb_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 
 xmit_failed:
-	can_free_echo_skb(priv->netdev, ctx->ndx);
+	can_free_echo_skb(priv->netdev, ctx->ndx, NULL);
 	mcba_usb_free_ctx(ctx);
 	dev_kfree_skb(skb);
 	stats->tx_dropped++;

drivers/net/can/usb/peak_usb/pcan_usb.c

@@ -11,6 +11,7 @@
 #include <linux/netdevice.h>
 #include <linux/usb.h>
 #include <linux/module.h>
+#include <linux/ethtool.h>
 
 #include <linux/can.h>
 #include <linux/can/dev.h>
@@ -40,6 +41,7 @@
 #define PCAN_USB_CMD_REGISTER	9
 #define PCAN_USB_CMD_EXT_VCC	10
 #define PCAN_USB_CMD_ERR_FR	11
+#define PCAN_USB_CMD_LED	12
 
 /* PCAN_USB_CMD_SET_BUS number arg */
 #define PCAN_USB_BUS_XCVER		2
@@ -248,6 +250,15 @@ static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff)
 	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_EXT_VCC, PCAN_USB_SET, args);
 }
 
+static int pcan_usb_set_led(struct peak_usb_device *dev, u8 onoff)
+{
+	u8 args[PCAN_USB_CMD_ARGS_LEN] = {
+		[0] = !!onoff,
+	};
+
+	return pcan_usb_send_cmd(dev, PCAN_USB_CMD_LED, PCAN_USB_SET, args);
+}
+
 /*
  * set bittiming value to can
  */
@@ -971,6 +982,40 @@ static int pcan_usb_probe(struct usb_interface *intf)
 	return 0;
 }
 
+static int pcan_usb_set_phys_id(struct net_device *netdev,
+				enum ethtool_phys_id_state state)
+{
+	struct peak_usb_device *dev = netdev_priv(netdev);
+	int err = 0;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* call ON/OFF twice a second */
+		return 2;
+
+	case ETHTOOL_ID_OFF:
+		err = pcan_usb_set_led(dev, 0);
+		break;
+
+	case ETHTOOL_ID_ON:
+		fallthrough;
+
+	case ETHTOOL_ID_INACTIVE:
+		/* restore LED default */
+		err = pcan_usb_set_led(dev, 1);
+		break;
+
+	default:
+		break;
+	}
+
+	return err;
+}
+
+static const struct ethtool_ops pcan_usb_ethtool_ops = {
+	.set_phys_id = pcan_usb_set_phys_id,
+};
+
 /*
  * describe the PCAN-USB adapter
  */
@@ -1001,6 +1046,8 @@ const struct peak_usb_adapter pcan_usb = {
 	/* size of device private data */
 	.sizeof_dev_private = sizeof(struct pcan_usb),
 
+	.ethtool_ops = &pcan_usb_ethtool_ops,
+
 	/* timestamps usage */
 	.ts_used_bits = 16,
 	.ts_period = 24575, /* calibration period in ts. */

drivers/net/can/usb/peak_usb/pcan_usb_core.c

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/usb.h>
+#include <linux/ethtool.h>
 
 #include <linux/can.h>
 #include <linux/can/dev.h>
@@ -371,7 +372,7 @@ static netdev_tx_t peak_usb_ndo_start_xmit(struct sk_buff *skb,
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err) {
-		can_free_echo_skb(netdev, context->echo_index);
+		can_free_echo_skb(netdev, context->echo_index, NULL);
 
 		usb_unanchor_urb(urb);
 
@@ -820,6 +821,9 @@ static int peak_usb_create_dev(const struct peak_usb_adapter *peak_usb_adapter,
 
 	netdev->flags |= IFF_ECHO; /* we support local echo */
 
+	/* add ethtool support */
+	netdev->ethtool_ops = peak_usb_adapter->ethtool_ops;
+
 	init_usb_anchor(&dev->rx_submitted);
 
 	init_usb_anchor(&dev->tx_submitted);

drivers/net/can/usb/peak_usb/pcan_usb_core.h

@@ -46,6 +46,8 @@ struct peak_usb_adapter {
 	const struct can_bittiming_const * const data_bittiming_const;
 	unsigned int ctrl_count;
 
+	const struct ethtool_ops *ethtool_ops;
+
 	int (*intf_probe)(struct usb_interface *intf);
 
 	int (*dev_init)(struct peak_usb_device *dev);

drivers/net/can/usb/peak_usb/pcan_usb_fd.c

@@ -7,6 +7,7 @@
 #include <linux/netdevice.h>
 #include <linux/usb.h>
 #include <linux/module.h>
+#include <linux/ethtool.h>
 
 #include <linux/can.h>
 #include <linux/can/dev.h>
@@ -773,6 +774,10 @@ static int pcan_usb_fd_encode_msg(struct peak_usb_device *dev,
 			tx_msg_flags |= PUCAN_MSG_RTR;
 	}
 
+	/* Single-Shot frame */
+	if (dev->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		tx_msg_flags |= PUCAN_MSG_SINGLE_SHOT;
+
 	tx_msg->flags = cpu_to_le16(tx_msg_flags);
 	tx_msg->channel_dlc = PUCAN_MSG_CHANNEL_DLC(dev->ctrl_idx, dlc);
 	memcpy(tx_msg->d, cfd->data, cfd->len);
@@ -1006,6 +1011,31 @@ static void pcan_usb_fd_free(struct peak_usb_device *dev)
 	}
 }
 
+/* blink LED's */
+static int pcan_usb_fd_set_phys_id(struct net_device *netdev,
+				   enum ethtool_phys_id_state state)
+{
+	struct peak_usb_device *dev = netdev_priv(netdev);
+	int err = 0;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		err = pcan_usb_fd_set_can_led(dev, PCAN_UFD_LED_FAST);
+		break;
+	case ETHTOOL_ID_INACTIVE:
+		err = pcan_usb_fd_set_can_led(dev, PCAN_UFD_LED_DEF);
+		break;
+	default:
+		break;
+	}
+
+	return err;
+}
+
+static const struct ethtool_ops pcan_usb_fd_ethtool_ops = {
+	.set_phys_id = pcan_usb_fd_set_phys_id,
+};
+
 /* describes the PCAN-USB FD adapter */
 static const struct can_bittiming_const pcan_usb_fd_const = {
 	.name = "pcan_usb_fd",
@@ -1037,7 +1067,7 @@ const struct peak_usb_adapter pcan_usb_fd = {
 	.ctrl_count = PCAN_USBFD_CHANNEL_COUNT,
 	.ctrlmode_supported = CAN_CTRLMODE_FD |
 			CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
-			CAN_CTRLMODE_CC_LEN8_DLC,
+			CAN_CTRLMODE_ONE_SHOT | CAN_CTRLMODE_CC_LEN8_DLC,
 	.clock = {
 		.freq = PCAN_UFD_CRYSTAL_HZ,
 	},
@@ -1047,6 +1077,8 @@ const struct peak_usb_adapter pcan_usb_fd = {
 	/* size of device private data */
 	.sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
 
+	.ethtool_ops = &pcan_usb_fd_ethtool_ops,
+
 	/* timestamps usage */
 	.ts_used_bits = 32,
 	.ts_period = 1000000, /* calibration period in ts. */
@@ -1110,7 +1142,7 @@ const struct peak_usb_adapter pcan_usb_chip = {
 	.ctrl_count = PCAN_USBFD_CHANNEL_COUNT,
 	.ctrlmode_supported = CAN_CTRLMODE_FD |
 		CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
-		CAN_CTRLMODE_CC_LEN8_DLC,
+		CAN_CTRLMODE_ONE_SHOT | CAN_CTRLMODE_CC_LEN8_DLC,
 	.clock = {
 		.freq = PCAN_UFD_CRYSTAL_HZ,
 	},
@@ -1120,6 +1152,8 @@ const struct peak_usb_adapter pcan_usb_chip = {
 	/* size of device private data */
 	.sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
 
+	.ethtool_ops = &pcan_usb_fd_ethtool_ops,
+
 	/* timestamps usage */
 	.ts_used_bits = 32,
 	.ts_period = 1000000, /* calibration period in ts. */
@@ -1183,7 +1217,7 @@ const struct peak_usb_adapter pcan_usb_pro_fd = {
 	.ctrl_count = PCAN_USBPROFD_CHANNEL_COUNT,
 	.ctrlmode_supported = CAN_CTRLMODE_FD |
 			CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
-			CAN_CTRLMODE_CC_LEN8_DLC,
+			CAN_CTRLMODE_ONE_SHOT | CAN_CTRLMODE_CC_LEN8_DLC,
 	.clock = {
 		.freq = PCAN_UFD_CRYSTAL_HZ,
 	},
@@ -1193,6 +1227,8 @@ const struct peak_usb_adapter pcan_usb_pro_fd = {
 	/* size of device private data */
 	.sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
 
+	.ethtool_ops = &pcan_usb_fd_ethtool_ops,
+
 	/* timestamps usage */
 	.ts_used_bits = 32,
 	.ts_period = 1000000, /* calibration period in ts. */
@@ -1256,7 +1292,7 @@ const struct peak_usb_adapter pcan_usb_x6 = {
 	.ctrl_count = PCAN_USBPROFD_CHANNEL_COUNT,
 	.ctrlmode_supported = CAN_CTRLMODE_FD |
 			CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
-			CAN_CTRLMODE_CC_LEN8_DLC,
+			CAN_CTRLMODE_ONE_SHOT | CAN_CTRLMODE_CC_LEN8_DLC,
 	.clock = {
 		.freq = PCAN_UFD_CRYSTAL_HZ,
 	},
@@ -1266,6 +1302,8 @@ const struct peak_usb_adapter pcan_usb_x6 = {
 	/* size of device private data */
 	.sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
 
+	.ethtool_ops = &pcan_usb_fd_ethtool_ops,
+
 	/* timestamps usage */
 	.ts_used_bits = 32,
 	.ts_period = 1000000, /* calibration period in ts. */

drivers/net/can/usb/peak_usb/pcan_usb_pro.c

@@ -9,6 +9,7 @@
 #include <linux/netdevice.h>
 #include <linux/usb.h>
 #include <linux/module.h>
+#include <linux/ethtool.h>
 
 #include <linux/can.h>
 #include <linux/can/dev.h>
@@ -36,6 +37,7 @@
 
 #define PCAN_USBPRO_RTR			0x01
 #define PCAN_USBPRO_EXT			0x02
+#define PCAN_USBPRO_SS			0x08
 
 #define PCAN_USBPRO_CMD_BUFFER_SIZE	512
 
@@ -776,9 +778,13 @@ static int pcan_usb_pro_encode_msg(struct peak_usb_device *dev,
 
 	flags = 0;
 	if (cf->can_id & CAN_EFF_FLAG)
-		flags |= 0x02;
+		flags |= PCAN_USBPRO_EXT;
 	if (cf->can_id & CAN_RTR_FLAG)
-		flags |= 0x01;
+		flags |= PCAN_USBPRO_RTR;
+
+	/* Single-Shot frame */
+	if (dev->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT)
+		flags |= PCAN_USBPRO_SS;
 
 	pcan_msg_add_rec(&usb_msg, data_type, 0, flags, len, cf->can_id,
 			 cf->data);
@@ -906,7 +912,7 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev)
 	usb_if->dev[dev->ctrl_idx] = dev;
 
 	/* set LED in default state (end of init phase) */
-	pcan_usb_pro_set_led(dev, 0, 1);
+	pcan_usb_pro_set_led(dev, PCAN_USBPRO_LED_DEVICE, 1);
 
 	kfree(bi);
 	kfree(fi);
@@ -990,6 +996,35 @@ int pcan_usb_pro_probe(struct usb_interface *intf)
 	return 0;
 }
 
+static int pcan_usb_pro_set_phys_id(struct net_device *netdev,
+				    enum ethtool_phys_id_state state)
+{
+	struct peak_usb_device *dev = netdev_priv(netdev);
+	int err = 0;
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* fast blinking forever */
+		err = pcan_usb_pro_set_led(dev, PCAN_USBPRO_LED_BLINK_FAST,
+					   0xffffffff);
+		break;
+
+	case ETHTOOL_ID_INACTIVE:
+		/* restore LED default */
+		err = pcan_usb_pro_set_led(dev, PCAN_USBPRO_LED_DEVICE, 1);
+		break;
+
+	default:
+		break;
+	}
+
+	return err;
+}
+
+static const struct ethtool_ops pcan_usb_pro_ethtool_ops = {
+	.set_phys_id = pcan_usb_pro_set_phys_id,
+};
+
 /*
  * describe the PCAN-USB Pro adapter
  */
@@ -1009,7 +1044,8 @@ const struct peak_usb_adapter pcan_usb_pro = {
 	.name = "PCAN-USB Pro",
 	.device_id = PCAN_USBPRO_PRODUCT_ID,
 	.ctrl_count = PCAN_USBPRO_CHANNEL_COUNT,
-	.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
+	.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY |
+			      CAN_CTRLMODE_ONE_SHOT,
 	.clock = {
 		.freq = PCAN_USBPRO_CRYSTAL_HZ,
 	},
@@ -1018,6 +1054,8 @@ const struct peak_usb_adapter pcan_usb_pro = {
 	/* size of device private data */
 	.sizeof_dev_private = sizeof(struct pcan_usb_pro_device),
 
+	.ethtool_ops = &pcan_usb_pro_ethtool_ops,
+
 	/* timestamps usage */
 	.ts_used_bits = 32,
 	.ts_period = 1000000, /* calibration period in ts. */

drivers/net/can/usb/peak_usb/pcan_usb_pro.h

@@ -115,6 +115,12 @@ struct __packed pcan_usb_pro_devid {
 	__le32 serial_num;
 };
 
+#define PCAN_USBPRO_LED_DEVICE		0x00
+#define PCAN_USBPRO_LED_BLINK_FAST	0x01
+#define PCAN_USBPRO_LED_BLINK_SLOW	0x02
+#define PCAN_USBPRO_LED_ON		0x03
+#define PCAN_USBPRO_LED_OFF		0x04
+
 struct __packed pcan_usb_pro_setled {
 	u8  data_type;
 	u8  channel;

drivers/net/can/usb/ucan.c

@@ -246,7 +246,7 @@ struct ucan_message_in {
 		 */
 		struct ucan_tx_complete_entry_t can_tx_complete_msg[0];
 	} __aligned(0x4) msg;
-} __packed;
+} __packed __aligned(0x4);
 
 /* Macros to calculate message lengths */
 #define UCAN_OUT_HDR_SIZE offsetof(struct ucan_message_out, msg)
@@ -675,7 +675,7 @@ static void ucan_tx_complete_msg(struct ucan_priv *up,
 			can_get_echo_skb(up->netdev, echo_index, NULL);
 		} else {
 			up->netdev->stats.tx_dropped++;
-			can_free_echo_skb(up->netdev, echo_index);
+			can_free_echo_skb(up->netdev, echo_index, NULL);
 		}
 		spin_unlock_irqrestore(&up->echo_skb_lock, flags);
 	}
@@ -843,7 +843,7 @@ static void ucan_write_bulk_callback(struct urb *urb)
 
 		/* update counters an cleanup */
 		spin_lock_irqsave(&up->echo_skb_lock, flags);
-		can_free_echo_skb(up->netdev, context - up->context_array);
+		can_free_echo_skb(up->netdev, context - up->context_array, NULL);
 		spin_unlock_irqrestore(&up->echo_skb_lock, flags);
 
 		up->netdev->stats.tx_dropped++;
@@ -1157,7 +1157,7 @@ static netdev_tx_t ucan_start_xmit(struct sk_buff *skb,
 		 * frees the skb
 		 */
 		spin_lock_irqsave(&up->echo_skb_lock, flags);
-		can_free_echo_skb(up->netdev, echo_index);
+		can_free_echo_skb(up->netdev, echo_index, NULL);
 		spin_unlock_irqrestore(&up->echo_skb_lock, flags);
 
 		if (ret == -ENODEV) {

drivers/net/can/usb/usb_8dev.c

@@ -691,7 +691,7 @@ static netdev_tx_t usb_8dev_start_xmit(struct sk_buff *skb,
 	return NETDEV_TX_BUSY;
 
 failed:
-	can_free_echo_skb(netdev, context->echo_index);
+	can_free_echo_skb(netdev, context->echo_index, NULL);
 
 	usb_unanchor_urb(urb);
 	usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);

drivers/net/can/xilinx_can.c

@@ -1772,17 +1772,15 @@ static int xcan_probe(struct platform_device *pdev)
 	/* Getting the CAN can_clk info */
 	priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
 	if (IS_ERR(priv->can_clk)) {
-		if (PTR_ERR(priv->can_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Device clock not found.\n");
-		ret = PTR_ERR(priv->can_clk);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->can_clk),
+				    "device clock not found\n");
 		goto err_free;
 	}
 
 	priv->bus_clk = devm_clk_get(&pdev->dev, devtype->bus_clk_name);
 	if (IS_ERR(priv->bus_clk)) {
-		if (PTR_ERR(priv->bus_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "bus clock not found\n");
-		ret = PTR_ERR(priv->bus_clk);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->bus_clk),
+				    "bus clock not found\n");
 		goto err_free;
 	}
 

include/linux/can/bittiming.h

 /* SPDX-License-Identifier: GPL-2.0-only */
 /* Copyright (c) 2020 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
+ * Copyright (c) 2021 Vincent Mailhol <mailhol.vincent@wanadoo.fr>
  */
 
 #ifndef _CAN_BITTIMING_H
@@ -10,9 +11,83 @@
 
 #define CAN_SYNC_SEG 1
 
+
+/* Kilobits and Megabits per second */
+#define CAN_KBPS 1000UL
+#define CAN_MBPS 1000000UL
+
+/* Megahertz */
+#define CAN_MHZ 1000000UL
+
+/*
+ * struct can_tdc - CAN FD Transmission Delay Compensation parameters
+ *
+ * At high bit rates, the propagation delay from the TX pin to the RX
+ * pin of the transceiver causes measurement errors: the sample point
+ * on the RX pin might occur on the previous bit.
+ *
+ * To solve this issue, ISO 11898-1 introduces in section 11.3.3
+ * "Transmitter delay compensation" a SSP (Secondary Sample Point)
+ * equal to the distance, in time quanta, from the start of the bit
+ * time on the TX pin to the actual measurement on the RX pin.
+ *
+ * This structure contains the parameters to calculate that SSP.
+ *
+ * @tdcv: Transmitter Delay Compensation Value. Distance, in time
+ *	quanta, from when the bit is sent on the TX pin to when it is
+ *	received on the RX pin of the transmitter. Possible options:
+ *
+ *	  O: automatic mode. The controller dynamically measure @tdcv
+ *	  for each transmitted CAN FD frame.
+ *
+ *	  Other values: manual mode. Use the fixed provided value.
+ *
+ * @tdco: Transmitter Delay Compensation Offset. Offset value, in time
+ *	quanta, defining the distance between the start of the bit
+ *	reception on the RX pin of the transceiver and the SSP
+ *	position such as SSP = @tdcv + @tdco.
+ *
+ *	If @tdco is zero, then TDC is disabled and both @tdcv and
+ *	@tdcf should be ignored.
+ *
+ * @tdcf: Transmitter Delay Compensation Filter window. Defines the
+ *	minimum value for the SSP position in time quanta. If SSP is
+ *	less than @tdcf, then no delay compensations occur and the
+ *	normal sampling point is used instead. The feature is enabled
+ *	if and only if @tdcv is set to zero (automatic mode) and @tdcf
+ *	is configured to a value greater than @tdco.
+ */
+struct can_tdc {
+	u32 tdcv;
+	u32 tdco;
+	u32 tdcf;
+};
+
+/*
+ * struct can_tdc_const - CAN hardware-dependent constant for
+ *	Transmission Delay Compensation
+ *
+ * @tdcv_max: Transmitter Delay Compensation Value maximum value.
+ *	Should be set to zero if the controller does not support
+ *	manual mode for tdcv.
+ * @tdco_max: Transmitter Delay Compensation Offset maximum value.
+ *	Should not be zero. If the controller does not support TDC,
+ *	then the pointer to this structure should be NULL.
+ * @tdcf_max: Transmitter Delay Compensation Filter window maximum
+ *	value. Should be set to zero if the controller does not
+ *	support this feature.
+ */
+struct can_tdc_const {
+	u32 tdcv_max;
+	u32 tdco_max;
+	u32 tdcf_max;
+};
+
 #ifdef CONFIG_CAN_CALC_BITTIMING
 int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 		       const struct can_bittiming_const *btc);
+
+void can_calc_tdco(struct net_device *dev);
 #else /* !CONFIG_CAN_CALC_BITTIMING */
 static inline int
 can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
@@ -21,6 +96,10 @@ can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
 	netdev_err(dev, "bit-timing calculation not available\n");
 	return -EINVAL;
 }
+
+static inline void can_calc_tdco(struct net_device *dev)
+{
+}
 #endif /* CONFIG_CAN_CALC_BITTIMING */
 
 int can_get_bittiming(struct net_device *dev, struct can_bittiming *bt,

include/linux/can/dev.h

@@ -39,19 +39,23 @@ struct can_priv {
 	struct net_device *dev;
 	struct can_device_stats can_stats;
 
-	struct can_bittiming bittiming, data_bittiming;
 	const struct can_bittiming_const *bittiming_const,
 		*data_bittiming_const;
-	const u16 *termination_const;
-	unsigned int termination_const_cnt;
-	u16 termination;
-	const u32 *bitrate_const;
+	struct can_bittiming bittiming, data_bittiming;
+	const struct can_tdc_const *tdc_const;
+	struct can_tdc tdc;
+
 	unsigned int bitrate_const_cnt;
+	const u32 *bitrate_const;
 	const u32 *data_bitrate_const;
 	unsigned int data_bitrate_const_cnt;
 	u32 bitrate_max;
 	struct can_clock clock;
 
+	unsigned int termination_const_cnt;
+	const u16 *termination_const;
+	u16 termination;
+
 	enum can_state state;
 
 	/* CAN controller features - see include/uapi/linux/can/netlink.h */

include/linux/can/skb.h

@@ -23,7 +23,8 @@ struct sk_buff *__can_get_echo_skb(struct net_device *dev, unsigned int idx,
 				   u8 *len_ptr, unsigned int *frame_len_ptr);
 unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx,
 			      unsigned int *frame_len_ptr);
-void can_free_echo_skb(struct net_device *dev, unsigned int idx);
+void can_free_echo_skb(struct net_device *dev, unsigned int idx,
+		       unsigned int *frame_len_ptr);
 struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
 struct sk_buff *alloc_canfd_skb(struct net_device *dev,
 				struct canfd_frame **cfd);