Merge branch 'for_3.12/exynos' of...

Merge branch 'for_3.12/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into exynos

Documentation/devicetree/bindings/thermal/exynos-thermal.txt

+* Exynos Thermal Management Unit (TMU)
+
+** Required properties:
+
+- compatible : One of the following:
+	       "samsung,exynos4412-tmu"
+	       "samsung,exynos4210-tmu"
+	       "samsung,exynos5250-tmu"
+	       "samsung,exynos5440-tmu"
+- interrupt-parent : The phandle for the interrupt controller
+- reg : Address range of the thermal registers. For soc's which has multiple
+	instances of TMU and some registers are shared across all TMU's like
+	interrupt related then 2 set of register has to supplied. First set
+	belongs	to each instance of TMU and second set belongs to common TMU
+	registers.
+- interrupts : Should contain interrupt for thermal system
+- clocks : The main clock for TMU device
+- clock-names : Thermal system clock name
+- vtmu-supply: This entry is optional and provides the regulator node supplying
+		voltage to TMU. If needed this entry can be placed inside
+		board/platform specific dts file.
+
+Example 1):
+
+	tmu@100C0000 {
+		compatible = "samsung,exynos4412-tmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x100C0000 0x100>;
+		interrupts = <2 4>;
+		clocks = <&clock 383>;
+		clock-names = "tmu_apbif";
+		status = "disabled";
+		vtmu-supply = <&tmu_regulator_node>;
+	};
+
+Example 2):
+
+	tmuctrl_0: tmuctrl@160118 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160118 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock 21>;
+		clock-names = "tmu_apbif";
+	};
+
+Note: For multi-instance tmu each instance should have an alias correctly
+numbered in "aliases" node.
+
+Example:
+
+aliases {
+	tmuctrl0 = &tmuctrl_0;
+	tmuctrl1 = &tmuctrl_1;
+	tmuctrl2 = &tmuctrl_2;
+};

Documentation/thermal/exynos_thermal

-Kernel driver exynos4_tmu
+Kernel driver exynos_tmu
 =================
 
 Supported chips:
-* ARM SAMSUNG EXYNOS4 series of SoC
-  Prefix: 'exynos4-tmu'
+* ARM SAMSUNG EXYNOS4, EXYNOS5 series of SoC
   Datasheet: Not publicly available
 
 Authors: Donggeun Kim <dg77.kim@samsung.com>
+Authors: Amit Daniel <amit.daniel@samsung.com>
 
-Description
------------
+TMU controller Description:
+---------------------------
 
-This driver allows to read temperature inside SAMSUNG EXYNOS4 series of SoC.
+This driver allows to read temperature inside SAMSUNG EXYNOS4/5 series of SoC.
 
 The chip only exposes the measured 8-bit temperature code value
 through a register.
@@ -34,9 +34,9 @@ The three equations are:
   TI2: Trimming info for 85 degree Celsius (stored at TRIMINFO register)
        Temperature code measured at 85 degree Celsius which is unchanged
 
-TMU(Thermal Management Unit) in EXYNOS4 generates interrupt
+TMU(Thermal Management Unit) in EXYNOS4/5 generates interrupt
 when temperature exceeds pre-defined levels.
-The maximum number of configurable threshold is four.
+The maximum number of configurable threshold is five.
 The threshold levels are defined as follows:
   Level_0: current temperature > trigger_level_0 + threshold
   Level_1: current temperature > trigger_level_1 + threshold
@@ -47,6 +47,31 @@ The threshold levels are defined as follows:
   through the corresponding registers.
 
 When an interrupt occurs, this driver notify kernel thermal framework
-with the function exynos4_report_trigger.
+with the function exynos_report_trigger.
 Although an interrupt condition for level_0 can be set,
 it can be used to synchronize the cooling action.
+
+TMU driver description:
+-----------------------
+
+The exynos thermal driver is structured as,
+
+					Kernel Core thermal framework
+				(thermal_core.c, step_wise.c, cpu_cooling.c)
+								^
+								|
+								|
+TMU configuration data -------> TMU Driver  <------> Exynos Core thermal wrapper
+(exynos_tmu_data.c)	      (exynos_tmu.c)	   (exynos_thermal_common.c)
+(exynos_tmu_data.h)	      (exynos_tmu.h)	   (exynos_thermal_common.h)
+
+a) TMU configuration data: This consist of TMU register offsets/bitfields
+		described through structure exynos_tmu_registers. Also several
+		other platform data (struct exynos_tmu_platform_data) members
+		are used to configure the TMU.
+b) TMU driver: This component initialises the TMU controller and sets different
+		thresholds. It invokes core thermal implementation with the call
+		exynos_report_trigger.
+c) Exynos Core thermal wrapper: This provides 3 wrapper function to use the
+		Kernel core thermal framework. They are exynos_unregister_thermal,
+		exynos_register_thermal and exynos_report_trigger.

drivers/thermal/Kconfig

@@ -114,14 +114,6 @@ config KIRKWOOD_THERMAL
 	  Support for the Kirkwood thermal sensor driver into the Linux thermal
 	  framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
 
-config EXYNOS_THERMAL
-	tristate "Temperature sensor on Samsung EXYNOS"
-	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
-	depends on CPU_THERMAL
-	help
-	  If you say yes here you get support for TMU (Thermal Management
-	  Unit) on SAMSUNG EXYNOS series of SoC.
-
 config DOVE_THERMAL
 	tristate "Temperature sensor on Marvell Dove SoCs"
 	depends on ARCH_DOVE
@@ -184,4 +176,9 @@ menu "Texas Instruments thermal drivers"
 source "drivers/thermal/ti-soc-thermal/Kconfig"
 endmenu
 
+menu "Samsung thermal drivers"
+depends on PLAT_SAMSUNG
+source "drivers/thermal/samsung/Kconfig"
+endmenu
+
 endif

drivers/thermal/Makefile

@@ -17,7 +17,7 @@ thermal_sys-$(CONFIG_CPU_THERMAL)	+= cpu_cooling.o
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
 obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
-obj-$(CONFIG_EXYNOS_THERMAL)	+= exynos_thermal.o
+obj-y				+= samsung/
 obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o

drivers/thermal/samsung/Kconfig

+config EXYNOS_THERMAL
+	tristate "Exynos thermal management unit driver"
+	depends on ARCH_HAS_BANDGAP
+	help
+	  If you say yes here you get support for the TMU (Thermal Management
+	  Unit) driver for SAMSUNG EXYNOS series of soc. This driver initialises
+	  the TMU, reports temperature and handles cooling action if defined.
+	  This driver uses the exynos core thermal API's and TMU configuration
+	  data from the supported soc's.
+
+config EXYNOS_THERMAL_CORE
+	bool "Core thermal framework support for EXYNOS SOC's"
+	depends on EXYNOS_THERMAL
+	help
+	  If you say yes here you get support for EXYNOS TMU
+	  (Thermal Management Unit) common registration/unregistration
+	  functions to the core thermal layer and also to use the generic
+	  cpu cooling API's.

drivers/thermal/samsung/Makefile

+#
+# Samsung thermal specific Makefile
+#
+obj-$(CONFIG_EXYNOS_THERMAL)			+= exynos_thermal.o
+exynos_thermal-y				:= exynos_tmu.o
+exynos_thermal-y				+= exynos_tmu_data.o
+exynos_thermal-$(CONFIG_EXYNOS_THERMAL_CORE)	+= exynos_thermal_common.o

include/linux/platform_data/exynos_thermal.h → drivers/thermal/samsung/exynos_thermal_common.h

 /*
- * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit)
+ * exynos_thermal_common.h - Samsung EXYNOS common header file
  *
- *  Copyright (C) 2011 Samsung Electronics
- *  Donggeun Kim <dg77.kim@samsung.com>
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Amit Daniel Kachhap <amit.daniel@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,22 +17,38 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
  */
 
-#ifndef _LINUX_EXYNOS_THERMAL_H
-#define _LINUX_EXYNOS_THERMAL_H
-#include <linux/cpu_cooling.h>
+#ifndef _EXYNOS_THERMAL_COMMON_H
+#define _EXYNOS_THERMAL_COMMON_H
 
-enum calibration_type {
-	TYPE_ONE_POINT_TRIMMING,
-	TYPE_TWO_POINT_TRIMMING,
-	TYPE_NONE,
-};
+/* In-kernel thermal framework related macros & definations */
+#define SENSOR_NAME_LEN	16
+#define MAX_TRIP_COUNT	8
+#define MAX_COOLING_DEVICE 4
+#define MAX_THRESHOLD_LEVS 5
+
+#define ACTIVE_INTERVAL 500
+#define IDLE_INTERVAL 10000
+#define MCELSIUS	1000
+
+/* CPU Zone information */
+#define PANIC_ZONE      4
+#define WARN_ZONE       3
+#define MONITOR_ZONE    2
+#define SAFE_ZONE       1
 
-enum soc_type {
-	SOC_ARCH_EXYNOS4210 = 1,
-	SOC_ARCH_EXYNOS,
+#define GET_ZONE(trip) (trip + 2)
+#define GET_TRIP(zone) (zone - 2)
+
+enum trigger_type {
+	THROTTLE_ACTIVE = 1,
+	THROTTLE_PASSIVE,
+	SW_TRIP,
+	HW_TRIP,
 };
+
 /**
  * struct freq_clip_table
  * @freq_clip_max: maximum frequency allowed for this cooling state.
@@ -49,71 +65,43 @@ struct freq_clip_table {
 	const struct cpumask *mask_val;
 };
 
-/**
- * struct exynos_tmu_platform_data
- * @threshold: basic temperature for generating interrupt
- *	       25 <= threshold <= 125 [unit: degree Celsius]
- * @threshold_falling: differntial value for setting threshold
- *		       of temperature falling interrupt.
- * @trigger_levels: array for each interrupt levels
- *	[unit: degree Celsius]
- *	0: temperature for trigger_level0 interrupt
- *	   condition for trigger_level0 interrupt:
- *		current temperature > threshold + trigger_levels[0]
- *	1: temperature for trigger_level1 interrupt
- *	   condition for trigger_level1 interrupt:
- *		current temperature > threshold + trigger_levels[1]
- *	2: temperature for trigger_level2 interrupt
- *	   condition for trigger_level2 interrupt:
- *		current temperature > threshold + trigger_levels[2]
- *	3: temperature for trigger_level3 interrupt
- *	   condition for trigger_level3 interrupt:
- *		current temperature > threshold + trigger_levels[3]
- * @trigger_level0_en:
- *	1 = enable trigger_level0 interrupt,
- *	0 = disable trigger_level0 interrupt
- * @trigger_level1_en:
- *	1 = enable trigger_level1 interrupt,
- *	0 = disable trigger_level1 interrupt
- * @trigger_level2_en:
- *	1 = enable trigger_level2 interrupt,
- *	0 = disable trigger_level2 interrupt
- * @trigger_level3_en:
- *	1 = enable trigger_level3 interrupt,
- *	0 = disable trigger_level3 interrupt
- * @gain: gain of amplifier in the positive-TC generator block
- *	0 <= gain <= 15
- * @reference_voltage: reference voltage of amplifier
- *	in the positive-TC generator block
- *	0 <= reference_voltage <= 31
- * @noise_cancel_mode: noise cancellation mode
- *	000, 100, 101, 110 and 111 can be different modes
- * @type: determines the type of SOC
- * @efuse_value: platform defined fuse value
- * @cal_type: calibration type for temperature
- * @freq_clip_table: Table representing frequency reduction percentage.
- * @freq_tab_count: Count of the above table as frequency reduction may
- *	applicable to only some of the trigger levels.
- *
- * This structure is required for configuration of exynos_tmu driver.
- */
-struct exynos_tmu_platform_data {
-	u8 threshold;
-	u8 threshold_falling;
-	u8 trigger_levels[4];
-	bool trigger_level0_en;
-	bool trigger_level1_en;
-	bool trigger_level2_en;
-	bool trigger_level3_en;
+struct	thermal_trip_point_conf {
+	int trip_val[MAX_TRIP_COUNT];
+	int trip_type[MAX_TRIP_COUNT];
+	int trip_count;
+	unsigned char trigger_falling;
+};
 
-	u8 gain;
-	u8 reference_voltage;
-	u8 noise_cancel_mode;
-	u32 efuse_value;
+struct	thermal_cooling_conf {
+	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
+	int freq_clip_count;
+};
 
-	enum calibration_type cal_type;
-	enum soc_type type;
-	struct freq_clip_table freq_tab[4];
-	unsigned int freq_tab_count;
+struct thermal_sensor_conf {
+	char name[SENSOR_NAME_LEN];
+	int (*read_temperature)(void *data);
+	int (*write_emul_temp)(void *drv_data, unsigned long temp);
+	struct thermal_trip_point_conf trip_data;
+	struct thermal_cooling_conf cooling_data;
+	void *driver_data;
+	void *pzone_data;
+	struct device *dev;
 };
-#endif /* _LINUX_EXYNOS_THERMAL_H */
+
+/*Functions used exynos based thermal sensor driver*/
+#ifdef CONFIG_EXYNOS_THERMAL_CORE
+void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf);
+int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
+void exynos_report_trigger(struct thermal_sensor_conf *sensor_conf);
+#else
+static inline void
+exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) { return; }
+
+static inline int
+exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
+
+static inline void
+exynos_report_trigger(struct thermal_sensor_conf *sensor_conf) { return; }
+
+#endif /* CONFIG_EXYNOS_THERMAL_CORE */
+#endif /* _EXYNOS_THERMAL_COMMON_H */

drivers/thermal/samsung/exynos_tmu_data.c

+/*
+ * exynos_tmu_data.c - Samsung EXYNOS tmu data file
+ *
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Amit Daniel Kachhap <amit.daniel@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "exynos_thermal_common.h"
+#include "exynos_tmu.h"
+#include "exynos_tmu_data.h"
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+static const struct exynos_tmu_registers exynos4210_tmu_registers = {
+	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+	.tmu_status = EXYNOS_TMU_REG_STATUS,
+	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+	.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
+	.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
+	.tmu_inten = EXYNOS_TMU_REG_INTEN,
+	.inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
+	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
+	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+};
+
+struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
+	.tmu_data = {
+		{
+		.threshold = 80,
+		.trigger_levels[0] = 5,
+		.trigger_levels[1] = 20,
+		.trigger_levels[2] = 30,
+		.trigger_enable[0] = true,
+		.trigger_enable[1] = true,
+		.trigger_enable[2] = true,
+		.trigger_enable[3] = false,
+		.trigger_type[0] = THROTTLE_ACTIVE,
+		.trigger_type[1] = THROTTLE_ACTIVE,
+		.trigger_type[2] = SW_TRIP,
+		.max_trigger_level = 4,
+		.gain = 15,
+		.reference_voltage = 7,
+		.cal_type = TYPE_ONE_POINT_TRIMMING,
+		.min_efuse_value = 40,
+		.max_efuse_value = 100,
+		.first_point_trim = 25,
+		.second_point_trim = 85,
+		.default_temp_offset = 50,
+		.freq_tab[0] = {
+			.freq_clip_max = 800 * 1000,
+			.temp_level = 85,
+			},
+		.freq_tab[1] = {
+			.freq_clip_max = 200 * 1000,
+			.temp_level = 100,
+		},
+		.freq_tab_count = 2,
+		.type = SOC_ARCH_EXYNOS4210,
+		.registers = &exynos4210_tmu_registers,
+		.features = TMU_SUPPORT_READY_STATUS,
+		},
+	},
+	.tmu_count = 1,
+};
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
+static const struct exynos_tmu_registers exynos5250_tmu_registers = {
+	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
+	.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+	.tmu_status = EXYNOS_TMU_REG_STATUS,
+	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
+	.threshold_th1 = EXYNOS_THD_TEMP_FALL,
+	.tmu_inten = EXYNOS_TMU_REG_INTEN,
+	.inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+	.inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+	.inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
+	.inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
+	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+	.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
+	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+	.emul_con = EXYNOS_EMUL_CON,
+	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+	.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define EXYNOS5250_TMU_DATA \
+	.threshold_falling = 10, \
+	.trigger_levels[0] = 85, \
+	.trigger_levels[1] = 103, \
+	.trigger_levels[2] = 110, \
+	.trigger_levels[3] = 120, \
+	.trigger_enable[0] = true, \
+	.trigger_enable[1] = true, \
+	.trigger_enable[2] = true, \
+	.trigger_enable[3] = false, \
+	.trigger_type[0] = THROTTLE_ACTIVE, \
+	.trigger_type[1] = THROTTLE_ACTIVE, \
+	.trigger_type[2] = SW_TRIP, \
+	.trigger_type[3] = HW_TRIP, \
+	.max_trigger_level = 4, \
+	.gain = 8, \
+	.reference_voltage = 16, \
+	.noise_cancel_mode = 4, \
+	.cal_type = TYPE_ONE_POINT_TRIMMING, \
+	.efuse_value = 55, \
+	.min_efuse_value = 40, \
+	.max_efuse_value = 100, \
+	.first_point_trim = 25, \
+	.second_point_trim = 85, \
+	.default_temp_offset = 50, \
+	.freq_tab[0] = { \
+		.freq_clip_max = 800 * 1000, \
+		.temp_level = 85, \
+	}, \
+	.freq_tab[1] = { \
+		.freq_clip_max = 200 * 1000, \
+		.temp_level = 103, \
+	}, \
+	.freq_tab_count = 2, \
+	.type = SOC_ARCH_EXYNOS, \
+	.registers = &exynos5250_tmu_registers, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+			TMU_SUPPORT_EMUL_TIME)
+
+struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
+	.tmu_data = {
+		{ EXYNOS5250_TMU_DATA },
+	},
+	.tmu_count = 1,
+};
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+static const struct exynos_tmu_registers exynos5440_tmu_registers = {
+	.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+	.calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
+	.calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+	.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
+	.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
+	.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
+	.threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
+	.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
+	.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
+	.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
+	.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
+	.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
+	.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
+	.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
+	.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
+	.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
+	.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
+	.inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
+	.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
+	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
+	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
+	.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
+	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
+	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+	.tmu_pmin = EXYNOS5440_TMU_PMIN,
+};
+
+#define EXYNOS5440_TMU_DATA \
+	.trigger_levels[0] = 100, \
+	.trigger_levels[4] = 105, \
+	.trigger_enable[0] = 1, \
+	.trigger_type[0] = SW_TRIP, \
+	.trigger_type[4] = HW_TRIP, \
+	.max_trigger_level = 5, \
+	.gain = 5, \
+	.reference_voltage = 16, \
+	.noise_cancel_mode = 4, \
+	.cal_type = TYPE_ONE_POINT_TRIMMING, \
+	.cal_mode = 0, \
+	.efuse_value = 0x5b2d, \
+	.min_efuse_value = 16, \
+	.max_efuse_value = 76, \
+	.first_point_trim = 25, \
+	.second_point_trim = 70, \
+	.default_temp_offset = 25, \
+	.type = SOC_ARCH_EXYNOS5440, \
+	.registers = &exynos5440_tmu_registers, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+			TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
+
+struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
+	.tmu_data = {
+		{ EXYNOS5440_TMU_DATA } ,
+		{ EXYNOS5440_TMU_DATA } ,
+		{ EXYNOS5440_TMU_DATA } ,
+	},
+	.tmu_count = 3,
+};
+#endif

drivers/thermal/samsung/exynos_tmu_data.h

+/*
+ * exynos_tmu_data.h - Samsung EXYNOS tmu data header file
+ *
+ *  Copyright (C) 2013 Samsung Electronics
+ *  Amit Daniel Kachhap <amit.daniel@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _EXYNOS_TMU_DATA_H
+#define _EXYNOS_TMU_DATA_H
+
+/* Exynos generic registers */
+#define EXYNOS_TMU_REG_TRIMINFO		0x0
+#define EXYNOS_TMU_REG_CONTROL		0x20
+#define EXYNOS_TMU_REG_STATUS		0x28
+#define EXYNOS_TMU_REG_CURRENT_TEMP	0x40
+#define EXYNOS_TMU_REG_INTEN		0x70
+#define EXYNOS_TMU_REG_INTSTAT		0x74
+#define EXYNOS_TMU_REG_INTCLEAR		0x78
+
+#define EXYNOS_TMU_TEMP_MASK		0xff
+#define EXYNOS_TMU_REF_VOLTAGE_SHIFT	24
+#define EXYNOS_TMU_REF_VOLTAGE_MASK	0x1f
+#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK	0xf
+#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT	8
+#define EXYNOS_TMU_CORE_EN_SHIFT	0
+
+/* Exynos4210 specific registers */
+#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP	0x44
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL0	0x50
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL1	0x54
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL2	0x58
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL3	0x5C
+#define EXYNOS4210_TMU_REG_PAST_TEMP0	0x60
+#define EXYNOS4210_TMU_REG_PAST_TEMP1	0x64
+#define EXYNOS4210_TMU_REG_PAST_TEMP2	0x68
+#define EXYNOS4210_TMU_REG_PAST_TEMP3	0x6C
+
+#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK	0x1
+#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK	0x10
+#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK	0x100
+#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK	0x1000
+#define EXYNOS4210_TMU_TRIG_LEVEL_MASK	0x1111
+#define EXYNOS4210_TMU_INTCLEAR_VAL	0x1111
+
+/* Exynos5250 and Exynos4412 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON	0x14
+#define EXYNOS_THD_TEMP_RISE		0x50
+#define EXYNOS_THD_TEMP_FALL		0x54
+#define EXYNOS_EMUL_CON		0x80
+
+#define EXYNOS_TRIMINFO_RELOAD_SHIFT	1
+#define EXYNOS_TRIMINFO_25_SHIFT	0
+#define EXYNOS_TRIMINFO_85_SHIFT	8
+#define EXYNOS_TMU_RISE_INT_MASK	0x111
+#define EXYNOS_TMU_RISE_INT_SHIFT	0
+#define EXYNOS_TMU_FALL_INT_MASK	0x111
+#define EXYNOS_TMU_FALL_INT_SHIFT	12
+#define EXYNOS_TMU_CLEAR_RISE_INT	0x111
+#define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
+#define EXYNOS_TMU_TRIP_MODE_SHIFT	13
+#define EXYNOS_TMU_TRIP_MODE_MASK	0x7
+#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT	12
+#define EXYNOS_TMU_CALIB_MODE_SHIFT	4
+#define EXYNOS_TMU_CALIB_MODE_MASK	0x3
+
+#define EXYNOS_TMU_INTEN_RISE0_SHIFT	0
+#define EXYNOS_TMU_INTEN_RISE1_SHIFT	4
+#define EXYNOS_TMU_INTEN_RISE2_SHIFT	8
+#define EXYNOS_TMU_INTEN_RISE3_SHIFT	12
+#define EXYNOS_TMU_INTEN_FALL0_SHIFT	16
+#define EXYNOS_TMU_INTEN_FALL1_SHIFT	20
+#define EXYNOS_TMU_INTEN_FALL2_SHIFT	24
+
+#define EXYNOS_EMUL_TIME	0x57F0
+#define EXYNOS_EMUL_TIME_MASK	0xffff
+#define EXYNOS_EMUL_TIME_SHIFT	16
+#define EXYNOS_EMUL_DATA_SHIFT	8
+#define EXYNOS_EMUL_DATA_MASK	0xFF
+#define EXYNOS_EMUL_ENABLE	0x1
+
+#define EXYNOS_MAX_TRIGGER_PER_REG	4
+
+/*exynos5440 specific registers*/
+#define EXYNOS5440_TMU_S0_7_TRIM		0x000
+#define EXYNOS5440_TMU_S0_7_CTRL		0x020
+#define EXYNOS5440_TMU_S0_7_DEBUG		0x040
+#define EXYNOS5440_TMU_S0_7_STATUS		0x060
+#define EXYNOS5440_TMU_S0_7_TEMP		0x0f0
+#define EXYNOS5440_TMU_S0_7_TH0			0x110
+#define EXYNOS5440_TMU_S0_7_TH1			0x130
+#define EXYNOS5440_TMU_S0_7_TH2			0x150
+#define EXYNOS5440_TMU_S0_7_EVTEN		0x1F0
+#define EXYNOS5440_TMU_S0_7_IRQEN		0x210
+#define EXYNOS5440_TMU_S0_7_IRQ			0x230
+/* exynos5440 common registers */
+#define EXYNOS5440_TMU_IRQ_STATUS		0x000
+#define EXYNOS5440_TMU_PMIN			0x004
+#define EXYNOS5440_TMU_TEMP			0x008
+
+#define EXYNOS5440_TMU_RISE_INT_MASK		0xf
+#define EXYNOS5440_TMU_RISE_INT_SHIFT		0
+#define EXYNOS5440_TMU_FALL_INT_MASK		0xf
+#define EXYNOS5440_TMU_FALL_INT_SHIFT		4
+#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT	0
+#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT	1
+#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT	2
+#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT	3
+#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT	4
+#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT	5
+#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT	6
+#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT	7
+#define EXYNOS5440_TMU_TH_RISE0_SHIFT		0
+#define EXYNOS5440_TMU_TH_RISE1_SHIFT		8
+#define EXYNOS5440_TMU_TH_RISE2_SHIFT		16
+#define EXYNOS5440_TMU_TH_RISE3_SHIFT		24
+#define EXYNOS5440_TMU_TH_RISE4_SHIFT		24
+#define EXYNOS5440_EFUSE_SWAP_OFFSET		8
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
+#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
+#else
+#define EXYNOS4210_TMU_DRV_DATA (NULL)
+#endif
+
+#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412))
+extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
+#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
+#else
+#define EXYNOS5250_TMU_DRV_DATA (NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
+#else
+#define EXYNOS5440_TMU_DRV_DATA (NULL)
+#endif
+
+#endif /*_EXYNOS_TMU_DATA_H*/