powerpc: dts: p1010rdb: fix INTx interrupt issue on P1010RDB-PB

Due to the INTA is shared with the active-low PHY2 interrupt on
P1010RDB-PA board, so configure P1010RDB-PA's INTA with polarity as
active-low, the P1010RDB-PB board is used separately, so configure
P1010RDB-PB's INTA with polarity as active-high.  The INTX in
P1010RDB-PB do not work because of the pcie@0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup
to p1010rdb-pb.dts and p1010rdb-pb_36b.dts.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240119203911.3143928-2-Frank.Li@nxp.com

arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts

@@ -29,3 +29,19 @@ &phy2 {
 };
 
 /include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};

arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts

@@ -56,3 +56,19 @@ &phy2 {
 };
 
 /include/ "p1010si-post.dtsi"
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};

arch/powerpc/boot/dts/fsl/p1010rdb.dtsi

@@ -215,19 +215,3 @@ enet2: ethernet@b2000 {
 		phy-connection-type = "sgmii";
 	};
 };
-
-&pci0 {
-	pcie@0 {
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			/*
-			 *irq[4:5] are active-high
-			 *irq[6:7] are active-low
-			 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};