Commit 9ca33ccd authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

[media] si4713: coding style whitespace cleanups

Fix most whitespace-related checkpatch errors/warnings.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Acked-by: default avatarEduardo Valentin <edubezval@gmail.com>
Acked-by: default avatarDinesh Ram <dinesh.ram@cern.ch>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent b2c6eedb
......@@ -50,12 +50,12 @@ MODULE_VERSION("0.0.1");
#define DEFAULT_RDS_PS_REPEAT_COUNT 0x0003
#define DEFAULT_LIMITER_RTIME 0x1392
#define DEFAULT_LIMITER_DEV 0x102CA
#define DEFAULT_PILOT_FREQUENCY 0x4A38
#define DEFAULT_PILOT_FREQUENCY 0x4A38
#define DEFAULT_PILOT_DEVIATION 0x1A5E
#define DEFAULT_ACOMP_ATIME 0x0000
#define DEFAULT_ACOMP_RTIME 0xF4240L
#define DEFAULT_ACOMP_GAIN 0x0F
#define DEFAULT_ACOMP_THRESHOLD (-0x28)
#define DEFAULT_ACOMP_THRESHOLD (-0x28)
#define DEFAULT_MUTE 0x01
#define DEFAULT_POWER_LEVEL 88
#define DEFAULT_FREQUENCY 8800
......@@ -269,9 +269,9 @@ static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
int err;
u8 val[SI4713_GET_PROP_NRESP];
/*
* .First byte = 0
* .Second byte = property's MSB
* .Third byte = property's LSB
* .First byte = 0
* .Second byte = property's MSB
* .Third byte = property's LSB
*/
const u8 args[SI4713_GET_PROP_NARGS] = {
0x00,
......@@ -306,11 +306,11 @@ static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
int rval;
u8 resp[SI4713_SET_PROP_NRESP];
/*
* .First byte = 0
* .Second byte = property's MSB
* .Third byte = property's LSB
* .Fourth byte = value's MSB
* .Fifth byte = value's LSB
* .First byte = 0
* .Second byte = property's MSB
* .Third byte = property's LSB
* .Fourth byte = value's MSB
* .Fifth byte = value's LSB
*/
const u8 args[SI4713_SET_PROP_NARGS] = {
0x00,
......@@ -352,8 +352,8 @@ static int si4713_powerup(struct si4713_device *sdev)
int err;
u8 resp[SI4713_PWUP_NRESP];
/*
* .First byte = Enabled interrupts and boot function
* .Second byte = Input operation mode
* .First byte = Enabled interrupts and boot function
* .Second byte = Input operation mode
*/
u8 args[SI4713_PWUP_NARGS] = {
SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
......@@ -515,8 +515,8 @@ static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
/*
* si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
* frequency between 76 and 108 MHz in 10 kHz units and
* steps of 50 kHz.
* frequency between 76 and 108 MHz in 10 kHz units and
* steps of 50 kHz.
* @sdev: si4713_device structure for the device we are communicating
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
*/
......@@ -525,9 +525,9 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
int err;
u8 val[SI4713_TXFREQ_NRESP];
/*
* .First byte = 0
* .Second byte = frequency's MSB
* .Third byte = frequency's LSB
* .First byte = 0
* .Second byte = frequency's MSB
* .Third byte = frequency's LSB
*/
const u8 args[SI4713_TXFREQ_NARGS] = {
0x00,
......@@ -555,11 +555,11 @@ static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
/*
* si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
* 1 dB units. A value of 0x00 indicates off. The command
* also sets the antenna tuning capacitance. A value of 0
* indicates autotuning, and a value of 1 - 191 indicates
* a manual override, which results in a tuning
* capacitance of 0.25 pF x @antcap.
* 1 dB units. A value of 0x00 indicates off. The command
* also sets the antenna tuning capacitance. A value of 0
* indicates autotuning, and a value of 1 - 191 indicates
* a manual override, which results in a tuning
* capacitance of 0.25 pF x @antcap.
* @sdev: si4713_device structure for the device we are communicating
* @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
* @antcap: value of antenna tuning capacitor (0 - 191)
......@@ -570,10 +570,10 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
int err;
u8 val[SI4713_TXPWR_NRESP];
/*
* .First byte = 0
* .Second byte = 0
* .Third byte = power
* .Fourth byte = antcap
* .First byte = 0
* .Second byte = 0
* .Third byte = power
* .Fourth byte = antcap
*/
u8 args[SI4713_TXPWR_NARGS] = {
0x00,
......@@ -602,12 +602,12 @@ static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
/*
* si4713_tx_tune_measure - Enters receive mode and measures the received noise
* level in units of dBuV on the selected frequency.
* The Frequency must be between 76 and 108 MHz in 10 kHz
* units and steps of 50 kHz. The command also sets the
* antenna tuning capacitance. A value of 0 means
* autotuning, and a value of 1 to 191 indicates manual
* override.
* level in units of dBuV on the selected frequency.
* The Frequency must be between 76 and 108 MHz in 10 kHz
* units and steps of 50 kHz. The command also sets the
* antenna tuning capacitance. A value of 0 means
* autotuning, and a value of 1 to 191 indicates manual
* override.
* @sdev: si4713_device structure for the device we are communicating
* @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
* @antcap: value of antenna tuning capacitor (0 - 191)
......@@ -618,10 +618,10 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
int err;
u8 val[SI4713_TXMEA_NRESP];
/*
* .First byte = 0
* .Second byte = frequency's MSB
* .Third byte = frequency's LSB
* .Fourth byte = antcap
* .First byte = 0
* .Second byte = frequency's MSB
* .Third byte = frequency's LSB
* .Fourth byte = antcap
*/
const u8 args[SI4713_TXMEA_NARGS] = {
0x00,
......@@ -651,11 +651,11 @@ static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
/*
* si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
* tx_tune_power commands. This command return the current
* frequency, output voltage in dBuV, the antenna tunning
* capacitance value and the received noise level. The
* command also clears the stcint interrupt bit when the
* first bit of its arguments is high.
* tx_tune_power commands. This command return the current
* frequency, output voltage in dBuV, the antenna tunning
* capacitance value and the received noise level. The
* command also clears the stcint interrupt bit when the
* first bit of its arguments is high.
* @sdev: si4713_device structure for the device we are communicating
* @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
* @frequency: returned frequency
......@@ -670,7 +670,7 @@ static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
int err;
u8 val[SI4713_TXSTATUS_NRESP];
/*
* .First byte = intack bit
* .First byte = intack bit
*/
const u8 args[SI4713_TXSTATUS_NARGS] = {
intack & SI4713_INTACK_MASK,
......@@ -1364,7 +1364,7 @@ static int si4713_probe(struct i2c_client *client,
struct v4l2_ctrl_handler *hdl;
int rval, i;
sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
if (!sdev) {
dev_err(&client->dev, "Failed to alloc video device.\n");
rval = -ENOMEM;
......@@ -1440,8 +1440,8 @@ static int si4713_probe(struct i2c_client *client,
V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
DEFAULT_ACOMP_GAIN);
sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
V4L2_CID_AUDIO_COMPRESSION_THRESHOLD, MIN_ACOMP_THRESHOLD,
MAX_ACOMP_THRESHOLD, 1,
V4L2_CID_AUDIO_COMPRESSION_THRESHOLD,
MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1,
DEFAULT_ACOMP_THRESHOLD);
sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
......@@ -1463,9 +1463,11 @@ static int si4713_probe(struct i2c_client *client,
V4L2_CID_TUNE_PREEMPHASIS,
V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER, 1, DEFAULT_POWER_LEVEL);
V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER,
1, DEFAULT_POWER_LEVEL);
sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP, 1, 0);
V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP,
1, 0);
if (hdl->error) {
rval = hdl->error;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment