cpuidle: kirkwood: Move out of mach directory

Move the Kirkwood cpuidle driver out of arch/arm/mach-kirkwood and
into drivers/cpuidle. Convert the driver into a platform driver.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/configs/kirkwood_defconfig

@@ -56,6 +56,7 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_KIRKWOOD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y

arch/arm/mach-kirkwood/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
 obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o

arch/arm/mach-kirkwood/board-dt.c

@@ -98,6 +98,8 @@ static void __init kirkwood_dt_init(void)
 	/* Setup root of clk tree */
 	kirkwood_of_clk_init();
 
+	kirkwood_cpuidle_init();
+
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif

arch/arm/mach-kirkwood/common.c

@@ -499,6 +499,28 @@ void __init kirkwood_wdt_init(void)
 	orion_wdt_init();
 }
 
+/*****************************************************************************
+ * CPU idle
+ ****************************************************************************/
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
 
 /*****************************************************************************
  * Time handling
@@ -671,6 +693,7 @@ void __init kirkwood_init(void)
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
 
+	kirkwood_cpuidle_init();
 #ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif

arch/arm/mach-kirkwood/common.h

@@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
 			    int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
+void kirkwood_cpuidle_init(void);
 void kirkwood_restart(char, const char *);
 void kirkwood_clk_init(void);
 

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -60,8 +60,9 @@
  * Register Map
  */
 #define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE + 0x00000)
 #define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE + 0x1500)
-#define DDR_OPERATION_BASE	(DDR_VIRT_BASE + 0x1418)
+#define DDR_OPERATION_BASE	(DDR_PHYS_BASE + 0x1418)
 
 #define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x10000)
 #define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE + 0x10000)

drivers/cpuidle/Kconfig

@@ -39,4 +39,10 @@ config CPU_IDLE_CALXEDA
 	help
 	  Select this to enable cpuidle on Calxeda processors.
 
+config CPU_IDLE_KIRKWOOD
+	bool "CPU Idle Driver for Kirkwood processors"
+	depends on ARCH_KIRKWOOD
+	help
+	  Select this to enable cpuidle on Kirkwood processors.
+
 endif

drivers/cpuidle/Makefile

@@ -6,3 +6,4 @@ obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
 obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
 
 obj-$(CONFIG_CPU_IDLE_CALXEDA) += cpuidle-calxeda.o
+obj-$(CONFIG_CPU_IDLE_KIRKWOOD) += cpuidle-kirkwood.o

arch/arm/mach-kirkwood/cpuidle.c → drivers/cpuidle/cpuidle-kirkwood.c

@@ -14,6 +14,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/cpuidle.h>
@@ -21,16 +22,17 @@
 #include <linux/export.h>
 #include <asm/proc-fns.h>
 #include <asm/cpuidle.h>
-#include <mach/kirkwood.h>
 
 #define KIRKWOOD_MAX_STATES	2
 
+static void __iomem *ddr_operation_base;
+
 /* Actual code that puts the SoC in different idle states */
 static int kirkwood_enter_idle(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
+			       struct cpuidle_driver *drv,
 			       int index)
 {
-	writel(0x7, DDR_OPERATION_BASE);
+	writel(0x7, ddr_operation_base);
 	cpu_do_idle();
 
 	return index;
@@ -51,13 +53,22 @@ static struct cpuidle_driver kirkwood_idle_driver = {
 	},
 	.state_count = KIRKWOOD_MAX_STATES,
 };
+static struct cpuidle_device *device;
 
 static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
 
 /* Initialize CPU idle by registering the idle states */
-static int kirkwood_init_cpuidle(void)
+static int kirkwood_cpuidle_probe(struct platform_device *pdev)
 {
-	struct cpuidle_device *device;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL)
+		return -EINVAL;
+
+	ddr_operation_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!ddr_operation_base)
+		return -EADDRNOTAVAIL;
 
 	device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
 	device->state_count = KIRKWOOD_MAX_STATES;
@@ -70,4 +81,26 @@ static int kirkwood_init_cpuidle(void)
 	return 0;
 }
 
-device_initcall(kirkwood_init_cpuidle);
+int kirkwood_cpuidle_remove(struct platform_device *pdev)
+{
+	cpuidle_unregister_device(device);
+	cpuidle_unregister_driver(&kirkwood_idle_driver);
+
+	return 0;
+}
+
+static struct platform_driver kirkwood_cpuidle_driver = {
+	.probe = kirkwood_cpuidle_probe,
+	.remove = kirkwood_cpuidle_remove,
+	.driver = {
+		   .name = "kirkwood_cpuidle",
+		   .owner = THIS_MODULE,
+		   },
+};
+
+module_platform_driver(kirkwood_cpuidle_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("Kirkwood cpu idle driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:kirkwood-cpuidle");