Commit 9d415fbf authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown

ASoC: soc-component: move snd_soc_component_seq_notifier()

Current soc-dapm / soc-core are using a long way round to call
.seq_notifier.

	if (driver->seq_notifier)
		dapm->seq_notifier = ...;
	...
	if (dapm->seq_notifier)
		ret = dapm->seq_notifier(...);

We can directly call it via driver->seq_notifier.
One note here is that both Card and Component have dapm,
but, Card's dapm doesn't have dapm->component.
We need to check it.

This patch moves snd_soc_component_seq_notifier() to soc-component.c,
and updates parameters.
dapm->seq_notifier is no longer needed
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wog54d0v.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent a2a34175
......@@ -281,6 +281,9 @@ int snd_soc_component_set_pll(struct snd_soc_component *component, int pll_id,
int snd_soc_component_set_jack(struct snd_soc_component *component,
struct snd_soc_jack *jack, void *data);
void snd_soc_component_seq_notifier(struct snd_soc_component *component,
enum snd_soc_dapm_type type, int subseq);
#ifdef CONFIG_REGMAP
void snd_soc_component_init_regmap(struct snd_soc_component *component,
struct regmap *regmap);
......
......@@ -661,8 +661,6 @@ struct snd_soc_dapm_context {
unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */
/* Go to BIAS_OFF in suspend if the DAPM context is idle */
unsigned int suspend_bias_off:1;
void (*seq_notifier)(struct snd_soc_dapm_context *,
enum snd_soc_dapm_type, int);
struct device *dev; /* from parent - for debug */
struct snd_soc_component *component; /* parent component */
......
......@@ -52,6 +52,13 @@ int snd_soc_component_set_pll(struct snd_soc_component *component, int pll_id,
}
EXPORT_SYMBOL_GPL(snd_soc_component_set_pll);
void snd_soc_component_seq_notifier(struct snd_soc_component *component,
enum snd_soc_dapm_type type, int subseq)
{
if (component->driver->seq_notifier)
component->driver->seq_notifier(component, type, subseq);
}
int snd_soc_component_enable_pin(struct snd_soc_component *component,
const char *pin)
{
......
......@@ -2646,14 +2646,6 @@ int snd_soc_register_dai(struct snd_soc_component *component,
}
EXPORT_SYMBOL_GPL(snd_soc_register_dai);
static void snd_soc_component_seq_notifier(struct snd_soc_dapm_context *dapm,
enum snd_soc_dapm_type type, int subseq)
{
struct snd_soc_component *component = dapm->component;
component->driver->seq_notifier(component, type, subseq);
}
static int snd_soc_component_stream_event(struct snd_soc_dapm_context *dapm,
int event)
{
......@@ -2690,8 +2682,6 @@ static int snd_soc_component_initialize(struct snd_soc_component *component,
dapm->bias_level = SND_SOC_BIAS_OFF;
dapm->idle_bias_off = !driver->idle_bias_on;
dapm->suspend_bias_off = driver->suspend_bias_off;
if (driver->seq_notifier)
dapm->seq_notifier = snd_soc_component_seq_notifier;
if (driver->stream_event)
dapm->stream_event = snd_soc_component_stream_event;
if (driver->set_bias_level)
......
......@@ -1611,12 +1611,12 @@ static void dapm_seq_run(struct snd_soc_card *card,
if (!list_empty(&pending))
dapm_seq_run_coalesced(card, &pending);
if (cur_dapm && cur_dapm->seq_notifier) {
if (cur_dapm && cur_dapm->component) {
for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++)
if (sort[i] == cur_sort)
cur_dapm->seq_notifier(cur_dapm,
i,
cur_subseq);
snd_soc_component_seq_notifier(
cur_dapm->component,
i, cur_subseq);
}
if (cur_dapm && w->dapm != cur_dapm)
......@@ -1674,11 +1674,12 @@ static void dapm_seq_run(struct snd_soc_card *card,
if (!list_empty(&pending))
dapm_seq_run_coalesced(card, &pending);
if (cur_dapm && cur_dapm->seq_notifier) {
if (cur_dapm && cur_dapm->component) {
for (i = 0; i < ARRAY_SIZE(dapm_up_seq); i++)
if (sort[i] == cur_sort)
cur_dapm->seq_notifier(cur_dapm,
i, cur_subseq);
snd_soc_component_seq_notifier(
cur_dapm->component,
i, cur_subseq);
}
list_for_each_entry(d, &card->dapm_list, list) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment