Commit 9d5645ad authored by Noralf Trønnes's avatar Noralf Trønnes

drm/tinydrm: Use drm_dev_enter/exit()

This protects device resources from use after device removal.

There are 3 ways for driver-device unbinding to happen:
- The driver module is unloaded causing the driver to be unregistered.
  This can't happen as long as there are open file handles because a
  reference is taken on the module.
- The device is removed (Device Tree overlay unloading).
  This can happen at any time.
- The driver sysfs unbind file can be used to unbind the driver from the
  device. This can happen any time.

v2: Since drm_atomic_helper_shutdown() has to be called after
    drm_dev_unplug() we don't want do block ->disable after unplug.
Signed-off-by: default avatarNoralf Trønnes <noralf@tronnes.org>
Acked-by: default avatarGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
parent 2afd9fcb
......@@ -50,13 +50,16 @@ static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
u8 addr_mode;
int ret;
int ret, idx;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(mipi);
if (ret < 0)
return;
goto out_exit;
if (ret == 1)
goto out_enable;
......@@ -172,6 +175,8 @@ static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
}
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs hx8357d_pipe_funcs = {
......
......@@ -89,13 +89,16 @@ static void ili9225_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
bool swap = mipi->swap_bytes;
u16 x_start, y_start;
u16 x1, x2, y1, y2;
int ret = 0;
int idx, ret = 0;
bool full;
void *tr;
if (!mipi->enabled)
return;
if (!drm_dev_enter(fb->dev, &idx))
return;
full = width == fb->width && height == fb->height;
DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
......@@ -158,6 +161,8 @@ static void ili9225_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
err_msg:
if (ret)
dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
drm_dev_exit(idx);
}
static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe,
......@@ -191,9 +196,12 @@ static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
.y1 = 0,
.y2 = fb->height,
};
int ret;
int ret, idx;
u8 am_id;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
mipi_dbi_hw_reset(mipi);
......@@ -207,7 +215,7 @@ static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
ret = ili9225_command(mipi, ILI9225_POWER_CONTROL_1, 0x0000);
if (ret) {
DRM_DEV_ERROR(dev, "Error sending command %d\n", ret);
return;
goto out_exit;
}
ili9225_command(mipi, ILI9225_POWER_CONTROL_2, 0x0000);
ili9225_command(mipi, ILI9225_POWER_CONTROL_3, 0x0000);
......@@ -280,6 +288,8 @@ static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe,
mipi->enabled = true;
ili9225_fb_dirty(fb, &rect);
out_exit:
drm_dev_exit(idx);
}
static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
......@@ -288,6 +298,13 @@ static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe)
DRM_DEBUG_KMS("\n");
/*
* This callback is not protected by drm_dev_enter/exit since we want to
* turn off the display on regular driver unload. It's highly unlikely
* that the underlying SPI controller is gone should this be called after
* unplug.
*/
if (!mipi->enabled)
return;
......
......@@ -56,13 +56,16 @@ static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
u8 addr_mode;
int ret;
int ret, idx;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(mipi);
if (ret < 0)
return;
goto out_exit;
if (ret == 1)
goto out_enable;
......@@ -128,6 +131,8 @@ static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
addr_mode |= ILI9341_MADCTL_BGR;
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs ili9341_pipe_funcs = {
......
......@@ -58,13 +58,16 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
u8 addr_mode;
int ret;
int ret, idx;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_conditional_reset(mipi);
if (ret < 0)
return;
goto out_exit;
if (ret == 1)
goto out_enable;
......@@ -136,6 +139,8 @@ static void mi0283qt_enable(struct drm_simple_display_pipe *pipe,
addr_mode |= ILI9341_MADCTL_BGR;
mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = {
......
......@@ -220,13 +220,16 @@ static void mipi_dbi_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
unsigned int height = rect->y2 - rect->y1;
unsigned int width = rect->x2 - rect->x1;
bool swap = mipi->swap_bytes;
int ret = 0;
int idx, ret = 0;
bool full;
void *tr;
if (!mipi->enabled)
return;
if (!drm_dev_enter(fb->dev, &idx))
return;
full = width == fb->width && height == fb->height;
DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
......@@ -253,6 +256,8 @@ static void mipi_dbi_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
err_msg:
if (ret)
dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
drm_dev_exit(idx);
}
/**
......@@ -307,10 +312,16 @@ void mipi_dbi_enable_flush(struct mipi_dbi *mipi,
.y1 = 0,
.y2 = fb->height,
};
int idx;
if (!drm_dev_enter(&mipi->drm, &idx))
return;
mipi->enabled = true;
mipi_dbi_fb_dirty(fb, &rect);
backlight_enable(mipi->backlight);
drm_dev_exit(idx);
}
EXPORT_SYMBOL(mipi_dbi_enable_flush);
......@@ -320,6 +331,10 @@ static void mipi_dbi_blank(struct mipi_dbi *mipi)
u16 height = drm->mode_config.min_height;
u16 width = drm->mode_config.min_width;
size_t len = width * height * 2;
int idx;
if (!drm_dev_enter(drm, &idx))
return;
memset(mipi->tx_buf, 0, len);
......@@ -329,6 +344,8 @@ static void mipi_dbi_blank(struct mipi_dbi *mipi)
(height >> 8) & 0xFF, (height - 1) & 0xFF);
mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START,
(u8 *)mipi->tx_buf, len);
drm_dev_exit(idx);
}
/**
......@@ -343,6 +360,9 @@ void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
if (!mipi->enabled)
return;
DRM_DEBUG_KMS("\n");
mipi->enabled = false;
......@@ -991,11 +1011,16 @@ static ssize_t mipi_dbi_debugfs_command_write(struct file *file,
u8 val, cmd = 0, parameters[64];
char *buf, *pos, *token;
unsigned int i;
int ret;
int ret, idx;
if (!drm_dev_enter(&mipi->drm, &idx))
return -ENODEV;
buf = memdup_user_nul(ubuf, count);
if (IS_ERR(buf))
return PTR_ERR(buf);
if (IS_ERR(buf)) {
ret = PTR_ERR(buf);
goto err_exit;
}
/* strip trailing whitespace */
for (i = count - 1; i > 0; i--)
......@@ -1031,6 +1056,8 @@ static ssize_t mipi_dbi_debugfs_command_write(struct file *file,
err_free:
kfree(buf);
err_exit:
drm_dev_exit(idx);
return ret < 0 ? ret : count;
}
......@@ -1039,8 +1066,11 @@ static int mipi_dbi_debugfs_command_show(struct seq_file *m, void *unused)
{
struct mipi_dbi *mipi = m->private;
u8 cmd, val[4];
int ret, idx;
size_t len;
int ret;
if (!drm_dev_enter(&mipi->drm, &idx))
return -ENODEV;
for (cmd = 0; cmd < 255; cmd++) {
if (!mipi_dbi_command_is_read(mipi, cmd))
......@@ -1071,6 +1101,8 @@ static int mipi_dbi_debugfs_command_show(struct seq_file *m, void *unused)
seq_printf(m, "%*phN\n", (int)len, val);
}
drm_dev_exit(idx);
return 0;
}
......
......@@ -533,8 +533,14 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb)
struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
struct repaper_epd *epd = drm_to_epd(fb->dev);
struct drm_rect clip;
int idx, ret = 0;
u8 *buf = NULL;
int ret = 0;
if (!epd->enabled)
return 0;
if (!drm_dev_enter(fb->dev, &idx))
return -ENODEV;
/* repaper can't do partial updates */
clip.x1 = 0;
......@@ -542,17 +548,16 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb)
clip.y1 = 0;
clip.y2 = fb->height;
if (!epd->enabled)
return 0;
repaper_get_temperature(epd);
DRM_DEBUG("Flushing [FB:%d] st=%ums\n", fb->base.id,
epd->factored_stage_time);
buf = kmalloc_array(fb->width, fb->height, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (!buf) {
ret = -ENOMEM;
goto out_exit;
}
if (import_attach) {
ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
......@@ -621,6 +626,8 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb)
out_free:
kfree(buf);
out_exit:
drm_dev_exit(idx);
return ret;
}
......@@ -650,7 +657,10 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
struct spi_device *spi = epd->spi;
struct device *dev = &spi->dev;
bool dc_ok = false;
int i, ret;
int i, ret, idx;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_DRIVER("\n");
......@@ -689,7 +699,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
if (!i) {
DRM_DEV_ERROR(dev, "timeout waiting for panel to become ready.\n");
power_off(epd);
return;
goto out_exit;
}
repaper_read_id(spi);
......@@ -700,7 +710,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
else
dev_err(dev, "wrong COG ID 0x%02x\n", ret);
power_off(epd);
return;
goto out_exit;
}
/* Disable OE */
......@@ -713,7 +723,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
else
DRM_DEV_ERROR(dev, "panel is reported broken\n");
power_off(epd);
return;
goto out_exit;
}
/* Power saving mode */
......@@ -753,7 +763,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
if (ret < 0) {
DRM_DEV_ERROR(dev, "failed to read chip (%d)\n", ret);
power_off(epd);
return;
goto out_exit;
}
if (ret & 0x40) {
......@@ -765,7 +775,7 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
if (!dc_ok) {
DRM_DEV_ERROR(dev, "dc/dc failed\n");
power_off(epd);
return;
goto out_exit;
}
/*
......@@ -776,6 +786,8 @@ static void repaper_pipe_enable(struct drm_simple_display_pipe *pipe,
epd->enabled = true;
epd->partial = false;
out_exit:
drm_dev_exit(idx);
}
static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe)
......@@ -784,6 +796,16 @@ static void repaper_pipe_disable(struct drm_simple_display_pipe *pipe)
struct spi_device *spi = epd->spi;
unsigned int line;
/*
* This callback is not protected by drm_dev_enter/exit since we want to
* turn off the display on regular driver unload. It's highly unlikely
* that the underlying SPI controller is gone should this be called after
* unplug.
*/
if (!epd->enabled)
return;
DRM_DEBUG_DRIVER("\n");
epd->enabled = false;
......
......@@ -119,12 +119,14 @@ static int st7586_buf_copy(void *dst, struct drm_framebuffer *fb,
static void st7586_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(fb->dev);
int start, end;
int ret = 0;
int start, end, idx, ret = 0;
if (!mipi->enabled)
return;
if (!drm_dev_enter(fb->dev, &idx))
return;
/* 3 pixels per byte, so grow clip to nearest multiple of 3 */
rect->x1 = rounddown(rect->x1, 3);
rect->x2 = roundup(rect->x2, 3);
......@@ -152,6 +154,8 @@ static void st7586_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
err_msg:
if (ret)
dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret);
drm_dev_exit(idx);
}
static void st7586_pipe_update(struct drm_simple_display_pipe *pipe,
......@@ -184,14 +188,17 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
.y1 = 0,
.y2 = fb->height,
};
int ret;
int idx, ret;
u8 addr_mode;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_reset(mipi);
if (ret)
return;
goto out_exit;
mipi_dbi_command(mipi, ST7586_AUTO_READ_CTRL, 0x9f);
mipi_dbi_command(mipi, ST7586_OTP_RW_CTRL, 0x00);
......@@ -244,12 +251,21 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
st7586_fb_dirty(fb, &rect);
mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON);
out_exit:
drm_dev_exit(idx);
}
static void st7586_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
/*
* This callback is not protected by drm_dev_enter/exit since we want to
* turn off the display on regular driver unload. It's highly unlikely
* that the underlying SPI controller is gone should this be called after
* unplug.
*/
DRM_DEBUG_KMS("\n");
if (!mipi->enabled)
......
......@@ -44,14 +44,17 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *plane_state)
{
struct mipi_dbi *mipi = drm_to_mipi_dbi(pipe->crtc.dev);
int ret;
int ret, idx;
u8 addr_mode;
if (!drm_dev_enter(pipe->crtc.dev, &idx))
return;
DRM_DEBUG_KMS("\n");
ret = mipi_dbi_poweron_reset(mipi);
if (ret)
return;
goto out_exit;
msleep(150);
......@@ -102,6 +105,8 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,
msleep(20);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
out_exit:
drm_dev_exit(idx);
}
static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment