Commit 9d8108f9 authored by Anson Huang's avatar Anson Huang Committed by Stephen Boyd

clk: imx6sll: add GPIO LPCGs

According to Reference Manual Rev.0, 06/2017, there are GPIO LPCGs
defined in CCM CCGRs, add them into clock tree.
Signed-off-by: default avatarAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent ce397d21
......@@ -253,6 +253,7 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
clks[IMX6SLL_CLK_DCP] = imx_clk_gate2("dcp", "ahb", base + 0x68, 10);
clks[IMX6SLL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28);
clks[IMX6SLL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28);
clks[IMX6SLL_CLK_GPIO2] = imx_clk_gate2("gpio2", "ipg", base + 0x68, 30);
/* CCGR1 */
clks[IMX6SLL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
......@@ -267,13 +268,17 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
clks[IMX6SLL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22);
clks[IMX6SLL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24);
clks[IMX6SLL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serail", "uart_podf", base + 0x6c, 24);
clks[IMX6SLL_CLK_GPIO1] = imx_clk_gate2("gpio1", "ipg", base + 0x6c, 26);
clks[IMX6SLL_CLK_GPIO5] = imx_clk_gate2("gpio5", "ipg", base + 0x6c, 30);
/* CCGR2 */
clks[IMX6SLL_CLK_GPIO6] = imx_clk_gate2("gpio6", "ipg", base + 0x70, 0);
clks[IMX6SLL_CLK_CSI] = imx_clk_gate2("csi", "axi", base + 0x70, 2);
clks[IMX6SLL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6);
clks[IMX6SLL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8);
clks[IMX6SLL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
clks[IMX6SLL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
clks[IMX6SLL_CLK_GPIO3] = imx_clk_gate2("gpio3", "ipg", base + 0x70, 26);
clks[IMX6SLL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28);
clks[IMX6SLL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30);
......@@ -283,6 +288,7 @@ static void __init imx6sll_clocks_init(struct device_node *ccm_node)
clks[IMX6SLL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_aclk", "axi", base + 0x74, 4);
clks[IMX6SLL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_podf", base + 0x74, 4);
clks[IMX6SLL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10);
clks[IMX6SLL_CLK_GPIO4] = imx_clk_gate2("gpio4", "ipg", base + 0x74, 12);
clks[IMX6SLL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16);
clks[IMX6SLL_CLK_MMDC_P0_FAST] = imx_clk_gate_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL);
clks[IMX6SLL_CLK_MMDC_P0_IPG] = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL);
......
......@@ -197,6 +197,13 @@
#define IMX6SLL_CLK_EXTERN_AUDIO_PODF 171
#define IMX6SLL_CLK_EXTERN_AUDIO 172
#define IMX6SLL_CLK_END 173
#define IMX6SLL_CLK_GPIO1 173
#define IMX6SLL_CLK_GPIO2 174
#define IMX6SLL_CLK_GPIO3 175
#define IMX6SLL_CLK_GPIO4 176
#define IMX6SLL_CLK_GPIO5 177
#define IMX6SLL_CLK_GPIO6 178
#define IMX6SLL_CLK_END 179
#endif /* __DT_BINDINGS_CLOCK_IMX6SLL_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment