Merge tag 'qcom-pinctrl-6.3' of...

Merge tag 'qcom-pinctrl-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel Qualcomm pinctrl Devicetree bindings changes for v6.3 Set of cleanups and fixes for Qualcomm pin controller bindings, to match existing DTS and correct the schema.

Merge tag 'qcom-pinctrl-6.3' of...
Merge tag 'qcom-pinctrl-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel Qualcomm pinctrl Devicetree bindings changes for v6.3 Set of cleanups and fixes for Qualcomm pin controller bindings, to match existing DTS and correct the schema.
9da134e2 · Linus Walleij · 91da7032 · 5b8c304c · 9da134e2 · 9da134e2
Commit 9da134e2 authored Jan 27, 2023 by Linus Walleij
36 changed files
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -19,7 +19,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  '#interrupt-cells': true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
    description: Specifies the base address and size of the TLMM register space
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -19,7 +19,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -74,7 +74,7 @@ patternProperties:
    oneOf:
      - $ref: "#/$defs/qcom-pmic-mpp-state"
      - patternProperties:
-          "mpp":
+          '-pins$':
            $ref: "#/$defs/qcom-pmic-mpp-state"
        additionalProperties: false

@@ -179,7 +179,7 @@ examples:
      };

      default-state {
-        gpio-mpp {
+        gpio-pins {
          pins = "mpp1", "mpp2", "mpp3", "mpp4";
          function = "digital";
          input-enable;

--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -19,7 +19,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -26,7 +26,9 @@ properties:
      - const: north
      - const: east

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -26,7 +26,9 @@ properties:
      - const: north
      - const: south

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -28,7 +28,9 @@ properties:
      - const: east
      - const: south

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  '#interrupt-cells': true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -65,7 +65,7 @@ $defs:
          List of gpio pins affected by the properties specified in this
          subnode.
        items:
-          pattern: "^gpio([0-1]|1[0-8])$"
+          pattern: "^gpio([0-9]|1[0-8])$"

      function:
        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
@@ -94,14 +94,12 @@ $defs:
          2: Lower Slew rate (slower edges)
          3: Reserved (No adjustments)

+      bias-bus-hold: true
      bias-pull-down: true
-
      bias-pull-up: true
-
      bias-disable: true
-
+      input-enable: true
      output-high: true
-
      output-low: true

    required:

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
@@ -31,7 +31,9 @@ properties:
      - const: center
      - const: north

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -23,7 +23,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true
@@ -48,6 +50,10 @@ patternProperties:
            $ref: "#/$defs/qcom-sdm845-tlmm-state"
        additionalProperties: false

+  "-hog(-[0-9]+)?$":
+    required:
+      - gpio-hog
+
 $defs:
  qcom-sdm845-tlmm-state:
    type: object
@@ -117,6 +123,7 @@ additionalProperties: false

 examples:
  - |
+    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    pinctrl@3400000 {
@@ -130,6 +137,12 @@ examples:
        gpio-ranges = <&tlmm 0 0 151>;
        wakeup-parent = <&pdc_intc>;

+        ap-suspend-l-hog {
+            gpio-hog;
+            gpios = <126 GPIO_ACTIVE_LOW>;
+            output-low;
+        };
+
        cci0-default-state {
            pins = "gpio17", "gpio18";
            function = "cci_i2c";

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -20,7 +20,9 @@ properties:
    description: Specifies the base address and size of the TLMM register space
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -19,7 +19,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -26,7 +26,9 @@ properties:
      - const: south
      - const: east

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -27,7 +27,9 @@ properties:
      - const: south
      - const: east

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -22,11 +22,21 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    minItems: 9
+    maxItems: 9
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true
-  gpio-reserved-ranges: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 78
+
+  gpio-line-names:
+    maxItems: 156
+
  "#gpio-cells": true
  gpio-ranges: true
  wakeup-parent: true
@@ -61,7 +71,7 @@ $defs:
          subnode.
        items:
          oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
        minItems: 1
        maxItems: 36
@@ -118,7 +128,16 @@ examples:
    pinctrl@f100000 {
        compatible = "qcom,sm6350-tlmm";
        reg = <0x0f100000 0x300000>;
-        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+
        gpio-controller;
        #gpio-cells = <2>;
        interrupt-controller;

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -27,7 +27,9 @@ properties:
      - const: north
      - const: south

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -25,7 +25,9 @@ properties:
      - const: south
      - const: north

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
@@ -22,11 +22,20 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true
-  gpio-reserved-ranges: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 102
+
+  gpio-line-names:
+    maxItems: 203
+
  "#gpio-cells": true
  gpio-ranges: true
  wakeup-parent: true
@@ -61,7 +70,7 @@ $defs:
          subnode.
        items:
          oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-2])$"
            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
        minItems: 1
        maxItems: 36

--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -22,7 +22,9 @@ properties:
  reg:
    maxItems: 1

-  interrupts: true
+  interrupts:
+    maxItems: 1
+
  interrupt-controller: true
  "#interrupt-cells": true
  gpio-controller: true

--- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -16,8 +16,9 @@ description:
 properties:
  interrupts:
    description:
-      Specifies the TLMM summary IRQ
-    maxItems: 1
+      TLMM summary IRQ and dirconn interrupts.
+    minItems: 1
+    maxItems: 9

  interrupt-controller: true