Commit 9df8ba7c authored by Philipp Puschmann's avatar Philipp Puschmann Committed by Mark Brown

ASoC: tas571x: disable regulators on failed probe

If probe fails after enabling the regulators regulator_put is called for
each supply without having them disabled before. This produces some
warnings like

WARNING: CPU: 0 PID: 90 at drivers/regulator/core.c:2044 _regulator_put.part.0+0x154/0x15c
[<c010f7a8>] (unwind_backtrace) from [<c010c544>] (show_stack+0x10/0x14)
[<c010c544>] (show_stack) from [<c012b640>] (__warn+0xd0/0xf4)
[<c012b640>] (__warn) from [<c012b9b4>] (warn_slowpath_fmt+0x64/0xc4)
[<c012b9b4>] (warn_slowpath_fmt) from [<c04c4064>] (_regulator_put.part.0+0x154/0x15c)
[<c04c4064>] (_regulator_put.part.0) from [<c04c4094>] (regulator_put+0x28/0x38)
[<c04c4094>] (regulator_put) from [<c04c40cc>] (regulator_bulk_free+0x28/0x38)
[<c04c40cc>] (regulator_bulk_free) from [<c0579b2c>] (release_nodes+0x1d0/0x22c)
[<c0579b2c>] (release_nodes) from [<c05756dc>] (really_probe+0x108/0x34c)
[<c05756dc>] (really_probe) from [<c0575aec>] (driver_probe_device+0xb8/0x16c)
[<c0575aec>] (driver_probe_device) from [<c0575d40>] (device_driver_attach+0x58/0x60)
[<c0575d40>] (device_driver_attach) from [<c0575da0>] (__driver_attach+0x58/0xcc)
[<c0575da0>] (__driver_attach) from [<c0573978>] (bus_for_each_dev+0x78/0xc0)
[<c0573978>] (bus_for_each_dev) from [<c0574b5c>] (bus_add_driver+0x188/0x1e0)
[<c0574b5c>] (bus_add_driver) from [<c05768b0>] (driver_register+0x74/0x108)
[<c05768b0>] (driver_register) from [<c061ab7c>] (i2c_register_driver+0x3c/0x88)
[<c061ab7c>] (i2c_register_driver) from [<c0102df8>] (do_one_initcall+0x58/0x250)
[<c0102df8>] (do_one_initcall) from [<c01a91bc>] (do_init_module+0x60/0x244)
[<c01a91bc>] (do_init_module) from [<c01ab5a4>] (load_module+0x2180/0x2540)
[<c01ab5a4>] (load_module) from [<c01abbd4>] (sys_finit_module+0xd0/0xe8)
[<c01abbd4>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)

Fixes: 3fd6e7d9 (ASoC: tas571x: New driver for TI TAS571x power amplifiers)
Signed-off-by: default avatarPhilipp Puschmann <p.puschmann@pironex.de>
Link: https://lore.kernel.org/r/20200414112754.3365406-1-p.puschmann@pironex.deSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 595571cc
...@@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_client *client, ...@@ -820,8 +820,10 @@ static int tas571x_i2c_probe(struct i2c_client *client,
priv->regmap = devm_regmap_init(dev, NULL, client, priv->regmap = devm_regmap_init(dev, NULL, client,
priv->chip->regmap_config); priv->chip->regmap_config);
if (IS_ERR(priv->regmap)) if (IS_ERR(priv->regmap)) {
return PTR_ERR(priv->regmap); ret = PTR_ERR(priv->regmap);
goto disable_regs;
}
priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW); priv->pdn_gpio = devm_gpiod_get_optional(dev, "pdn", GPIOD_OUT_LOW);
if (IS_ERR(priv->pdn_gpio)) { if (IS_ERR(priv->pdn_gpio)) {
...@@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, ...@@ -845,7 +847,7 @@ static int tas571x_i2c_probe(struct i2c_client *client,
ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0);
if (ret) if (ret)
return ret; goto disable_regs;
usleep_range(50000, 60000); usleep_range(50000, 60000);
...@@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_client *client, ...@@ -861,12 +863,20 @@ static int tas571x_i2c_probe(struct i2c_client *client,
*/ */
ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0); ret = regmap_update_bits(priv->regmap, TAS571X_MVOL_REG, 1, 0);
if (ret) if (ret)
return ret; goto disable_regs;
} }
return devm_snd_soc_register_component(&client->dev, ret = devm_snd_soc_register_component(&client->dev,
&priv->component_driver, &priv->component_driver,
&tas571x_dai, 1); &tas571x_dai, 1);
if (ret)
goto disable_regs;
return ret;
disable_regs:
regulator_bulk_disable(priv->chip->num_supply_names, priv->supplies);
return ret;
} }
static int tas571x_i2c_remove(struct i2c_client *client) static int tas571x_i2c_remove(struct i2c_client *client)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment