sc16is7xx: use kthread_worker for tx_work and irq

Convert workqueue usage to a real-time kworker.  The problem
with workqueues is that we cannot set real-time priorities on
our work and asynchronous reconfiguration can be blocked by
less important tasks.

We need kthread for the interrupt anyway and because we will
now be using single kthread for all TX-related operations we
can get rid of the port mutex.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sc16is7xx.c

@@ -303,7 +303,7 @@ struct sc16is7xx_devtype {
 
 struct sc16is7xx_one {
 	struct uart_port		port;
-	struct work_struct		tx_work;
+	struct kthread_work		tx_work;
 	struct work_struct		md_work;
 };
 
@@ -311,15 +311,18 @@ struct sc16is7xx_port {
 	struct uart_driver		uart;
 	struct sc16is7xx_devtype	*devtype;
 	struct regmap			*regmap;
-	struct mutex			mutex;
 	struct clk			*clk;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip		gpio;
 #endif
 	unsigned char			buf[SC16IS7XX_FIFO_SIZE];
+	struct kthread_worker		kworker;
+	struct task_struct		*kworker_task;
+	struct kthread_work		irq_work;
 	struct sc16is7xx_one		p[0];
 };
 
+#define to_sc16is7xx_port(p,e)	((container_of((p), struct sc16is7xx_port, e)))
 #define to_sc16is7xx_one(p,e)	((container_of((p), struct sc16is7xx_one, e)))
 
 static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
@@ -616,9 +619,7 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
 					       !!(msr & SC16IS7XX_MSR_CTS_BIT));
 			break;
 		case SC16IS7XX_IIR_THRI_SRC:
-			mutex_lock(&s->mutex);
 			sc16is7xx_handle_tx(port);
-			mutex_unlock(&s->mutex);
 			break;
 		default:
 			dev_err_ratelimited(port->dev,
@@ -629,25 +630,29 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
 	} while (1);
 }
 
-static irqreturn_t sc16is7xx_ist(int irq, void *dev_id)
+static void sc16is7xx_ist(struct kthread_work *ws)
 {
-	struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+	struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);
 	int i;
 
 	for (i = 0; i < s->uart.nr; ++i)
 		sc16is7xx_port_irq(s, i);
+}
+
+static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
+{
+	struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+
+	queue_kthread_work(&s->kworker, &s->irq_work);
 
 	return IRQ_HANDLED;
 }
 
-static void sc16is7xx_wq_proc(struct work_struct *ws)
+static void sc16is7xx_tx_proc(struct kthread_work *ws)
 {
 	struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work);
-	struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
 
-	mutex_lock(&s->mutex);
 	sc16is7xx_handle_tx(&one->port);
-	mutex_unlock(&s->mutex);
 }
 
 static void sc16is7xx_stop_tx(struct uart_port* port)
@@ -669,6 +674,7 @@ static void sc16is7xx_stop_rx(struct uart_port* port)
 
 static void sc16is7xx_start_tx(struct uart_port *port)
 {
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
 	/* handle rs485 */
@@ -677,8 +683,7 @@ static void sc16is7xx_start_tx(struct uart_port *port)
 		mdelay(port->rs485.delay_rts_before_send);
 	}
 
-	if (!work_pending(&one->tx_work))
-		schedule_work(&one->tx_work);
+	queue_kthread_work(&s->kworker, &one->tx_work);
 }
 
 static unsigned int sc16is7xx_tx_empty(struct uart_port *port)
@@ -909,6 +914,8 @@ static int sc16is7xx_startup(struct uart_port *port)
 
 static void sc16is7xx_shutdown(struct uart_port *port)
 {
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
 	/* Disable all interrupts */
 	sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
 	/* Disable TX/RX */
@@ -919,6 +926,8 @@ static void sc16is7xx_shutdown(struct uart_port *port)
 			      SC16IS7XX_EFCR_TXDISABLE_BIT);
 
 	sc16is7xx_power(port, 0);
+
+	flush_kthread_worker(&s->kworker);
 }
 
 static const char *sc16is7xx_type(struct uart_port *port)
@@ -1036,6 +1045,7 @@ static int sc16is7xx_probe(struct device *dev,
 			   struct sc16is7xx_devtype *devtype,
 			   struct regmap *regmap, int irq, unsigned long flags)
 {
+	struct sched_param sched_param = { .sched_priority = MAX_RT_PRIO / 2 };
 	unsigned long freq, *pfreq = dev_get_platdata(dev);
 	int i, ret;
 	struct sc16is7xx_port *s;
@@ -1077,6 +1087,16 @@ static int sc16is7xx_probe(struct device *dev,
 		goto out_clk;
 	}
 
+	init_kthread_worker(&s->kworker);
+	init_kthread_work(&s->irq_work, sc16is7xx_ist);
+	s->kworker_task = kthread_run(kthread_worker_fn, &s->kworker,
+				      "sc16is7xx");
+	if (IS_ERR(s->kworker_task)) {
+		ret = PTR_ERR(s->kworker_task);
+		goto out_uart;
+	}
+	sched_setscheduler(s->kworker_task, SCHED_FIFO, &sched_param);
+
 #ifdef CONFIG_GPIOLIB
 	if (devtype->nr_gpio) {
 		/* Setup GPIO cotroller */
@@ -1092,12 +1112,10 @@ static int sc16is7xx_probe(struct device *dev,
 		s->gpio.can_sleep	 = 1;
 		ret = gpiochip_add(&s->gpio);
 		if (ret)
-			goto out_uart;
+			goto out_thread;
 	}
 #endif
 
-	mutex_init(&s->mutex);
-
 	for (i = 0; i < devtype->nr_uart; ++i) {
 		/* Initialize port data */
 		s->p[i].port.line	= i;
@@ -1117,7 +1135,7 @@ static int sc16is7xx_probe(struct device *dev,
 				     SC16IS7XX_EFCR_RXDISABLE_BIT |
 				     SC16IS7XX_EFCR_TXDISABLE_BIT);
 		/* Initialize queue for start TX */
-		INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc);
+		init_kthread_work(&s->p[i].tx_work, sc16is7xx_tx_proc);
 		/* Initialize queue for changing mode */
 		INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc);
 		/* Register port */
@@ -1127,22 +1145,23 @@ static int sc16is7xx_probe(struct device *dev,
 	}
 
 	/* Setup interrupt */
-	ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist,
-					IRQF_ONESHOT | flags, dev_name(dev), s);
+	ret = devm_request_irq(dev, irq, sc16is7xx_irq,
+			       IRQF_ONESHOT | flags, dev_name(dev), s);
 	if (!ret)
 		return 0;
 
 	for (i = 0; i < s->uart.nr; i++)
 		uart_remove_one_port(&s->uart, &s->p[i].port);
 
-	mutex_destroy(&s->mutex);
-
 #ifdef CONFIG_GPIOLIB
 	if (devtype->nr_gpio)
 		gpiochip_remove(&s->gpio);
 
-out_uart:
+out_thread:
 #endif
+	kthread_stop(s->kworker_task);
+
+out_uart:
 	uart_unregister_driver(&s->uart);
 
 out_clk:
@@ -1163,13 +1182,14 @@ static int sc16is7xx_remove(struct device *dev)
 #endif
 
 	for (i = 0; i < s->uart.nr; i++) {
-		cancel_work_sync(&s->p[i].tx_work);
 		cancel_work_sync(&s->p[i].md_work);
 		uart_remove_one_port(&s->uart, &s->p[i].port);
 		sc16is7xx_power(&s->p[i].port, 0);
 	}
 
-	mutex_destroy(&s->mutex);
+	flush_kthread_worker(&s->kworker);
+	kthread_stop(s->kworker_task);
+
 	uart_unregister_driver(&s->uart);
 	if (!IS_ERR(s->clk))
 		clk_disable_unprepare(s->clk);