Commit 9eb8eff0 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by Jakub Kicinski

net: bridge: allow enslaving some DSA master network devices

Commit 8db0a2ee ("net: bridge: reject DSA-enabled master netdevices
as bridge members") added a special check in br_if.c in order to check
for a DSA master network device with a tagging protocol configured. This
was done because back then, such devices, once enslaved in a bridge
would become inoperative and would not pass DSA tagged traffic anymore
due to br_handle_frame returning RX_HANDLER_CONSUMED.

But right now we have valid use cases which do require bridging of DSA
masters. One such example is when the DSA master ports are DSA switch
ports themselves (in a disjoint tree setup). This should be completely
equivalent, functionally speaking, from having multiple DSA switches
hanging off of the ports of a switchdev driver. So we should allow the
enslaving of DSA tagged master network devices.

Instead of the regular br_handle_frame(), install a new function
br_handle_frame_dummy() on these DSA masters, which returns
RX_HANDLER_PASS in order to call into the DSA specific tagging protocol
handlers, and lift the restriction from br_add_if.
Suggested-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Suggested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 90d9834e
......@@ -651,7 +651,7 @@ struct dsa_switch_driver {
struct net_device *dsa_dev_to_net_device(struct device *dev);
/* Keep inline for faster access in hot path */
static inline bool netdev_uses_dsa(struct net_device *dev)
static inline bool netdev_uses_dsa(const struct net_device *dev)
{
#if IS_ENABLED(CONFIG_NET_DSA)
return dev->dsa_ptr && dev->dsa_ptr->rcv;
......
......@@ -563,18 +563,32 @@ int br_add_if(struct net_bridge *br, struct net_device *dev,
unsigned br_hr, dev_hr;
bool changed_addr;
/* Don't allow bridging non-ethernet like devices, or DSA-enabled
* master network devices since the bridge layer rx_handler prevents
* the DSA fake ethertype handler to be invoked, so we do not strip off
* the DSA switch tag protocol header and the bridge layer just return
* RX_HANDLER_CONSUMED, stopping RX processing for these frames.
*/
/* Don't allow bridging non-ethernet like devices. */
if ((dev->flags & IFF_LOOPBACK) ||
dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
!is_valid_ether_addr(dev->dev_addr) ||
netdev_uses_dsa(dev))
!is_valid_ether_addr(dev->dev_addr))
return -EINVAL;
/* Also don't allow bridging of net devices that are DSA masters, since
* the bridge layer rx_handler prevents the DSA fake ethertype handler
* to be invoked, so we don't get the chance to strip off and parse the
* DSA switch tag protocol header (the bridge layer just returns
* RX_HANDLER_CONSUMED, stopping RX processing for these frames).
* The only case where that would not be an issue is when bridging can
* already be offloaded, such as when the DSA master is itself a DSA
* or plain switchdev port, and is bridged only with other ports from
* the same hardware device.
*/
if (netdev_uses_dsa(dev)) {
list_for_each_entry(p, &br->port_list, list) {
if (!netdev_port_same_parent_id(dev, p->dev)) {
NL_SET_ERR_MSG(extack,
"Cannot do software bridging with a DSA master");
return -EINVAL;
}
}
}
/* No bridging of bridges */
if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) {
NL_SET_ERR_MSG(extack,
......@@ -618,7 +632,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev,
if (err)
goto err3;
err = netdev_rx_handler_register(dev, br_handle_frame, p);
err = netdev_rx_handler_register(dev, br_get_rx_handler(dev), p);
if (err)
goto err4;
......
......@@ -17,6 +17,7 @@
#endif
#include <linux/neighbour.h>
#include <net/arp.h>
#include <net/dsa.h>
#include <linux/export.h>
#include <linux/rculist.h>
#include "br_private.h"
......@@ -257,7 +258,7 @@ static int nf_hook_bridge_pre(struct sk_buff *skb, struct sk_buff **pskb)
* Return NULL if skb is handled
* note: already called with rcu_read_lock
*/
rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
static rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
{
struct net_bridge_port *p;
struct sk_buff *skb = *pskb;
......@@ -359,3 +360,23 @@ rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
}
return RX_HANDLER_CONSUMED;
}
/* This function has no purpose other than to appease the br_port_get_rcu/rtnl
* helpers which identify bridged ports according to the rx_handler installed
* on them (so there _needs_ to be a bridge rx_handler even if we don't need it
* to do anything useful). This bridge won't support traffic to/from the stack,
* but only hardware bridging. So return RX_HANDLER_PASS so we don't steal
* frames from the ETH_P_XDSA packet_type handler.
*/
static rx_handler_result_t br_handle_frame_dummy(struct sk_buff **pskb)
{
return RX_HANDLER_PASS;
}
rx_handler_func_t *br_get_rx_handler(const struct net_device *dev)
{
if (netdev_uses_dsa(dev))
return br_handle_frame_dummy;
return br_handle_frame;
}
......@@ -702,16 +702,16 @@ int nbp_backup_change(struct net_bridge_port *p, struct net_device *backup_dev);
/* br_input.c */
int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb);
rx_handler_result_t br_handle_frame(struct sk_buff **pskb);
rx_handler_func_t *br_get_rx_handler(const struct net_device *dev);
static inline bool br_rx_handler_check_rcu(const struct net_device *dev)
{
return rcu_dereference(dev->rx_handler) == br_handle_frame;
return rcu_dereference(dev->rx_handler) == br_get_rx_handler(dev);
}
static inline bool br_rx_handler_check_rtnl(const struct net_device *dev)
{
return rcu_dereference_rtnl(dev->rx_handler) == br_handle_frame;
return rcu_dereference_rtnl(dev->rx_handler) == br_get_rx_handler(dev);
}
static inline struct net_bridge_port *br_port_get_check_rcu(const struct net_device *dev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment