Commit 9ec051bf authored by Rodrigo Siqueira's avatar Rodrigo Siqueira Committed by Alex Deucher

drm/amd/display: Rework dsc to isolate FPU operations

When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:

./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o

[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()

This commit fixes the above issues by rework DSC as described:

1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
   functions;
4. Add a mid-layer function that does not use any float point operation,
   and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.

CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: default avatarRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: default avatarMikita Lipski <Mikita.Lipski@amd.com>
Acked-by: default avatarQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 790243d3
...@@ -28,8 +28,6 @@ endif ...@@ -28,8 +28,6 @@ endif
endif endif
CFLAGS_$(AMDDALPATH)/dc/dsc/rc_calc.o := $(dsc_ccflags) CFLAGS_$(AMDDALPATH)/dc/dsc/rc_calc.o := $(dsc_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dsc/rc_calc_dpi.o := $(dsc_ccflags)
CFLAGS_$(AMDDALPATH)/dc/dsc/dc_dsc.o := $(dsc_ccflags)
DSC = dc_dsc.o rc_calc.o rc_calc_dpi.o DSC = dc_dsc.o rc_calc.o rc_calc_dpi.o
......
...@@ -22,10 +22,12 @@ ...@@ -22,10 +22,12 @@
* Author: AMD * Author: AMD
*/ */
#include <drm/drm_dsc.h>
#include "dc_hw_types.h" #include "dc_hw_types.h"
#include "dsc.h" #include "dsc.h"
#include <drm/drm_dp_helper.h> #include <drm/drm_dp_helper.h>
#include "dc.h" #include "dc.h"
#include "rc_calc.h"
/* This module's internal functions */ /* This module's internal functions */
...@@ -304,22 +306,6 @@ static inline uint32_t dsc_div_by_10_round_up(uint32_t value) ...@@ -304,22 +306,6 @@ static inline uint32_t dsc_div_by_10_round_up(uint32_t value)
return (value + 9) / 10; return (value + 9) / 10;
} }
static inline uint32_t calc_dsc_bpp_x16(uint32_t stream_bandwidth_kbps, uint32_t pix_clk_100hz, uint32_t bpp_increment_div)
{
uint32_t dsc_target_bpp_x16;
float f_dsc_target_bpp;
float f_stream_bandwidth_100bps = stream_bandwidth_kbps * 10.0f;
uint32_t precision = bpp_increment_div; // bpp_increment_div is actually precision
f_dsc_target_bpp = f_stream_bandwidth_100bps / pix_clk_100hz;
// Round down to the nearest precision stop to bring it into DSC spec range
dsc_target_bpp_x16 = (uint32_t)(f_dsc_target_bpp * precision);
dsc_target_bpp_x16 = (dsc_target_bpp_x16 * 16) / precision;
return dsc_target_bpp_x16;
}
/* Get DSC bandwidth range based on [min_bpp, max_bpp] target bitrate range, and timing's pixel clock /* Get DSC bandwidth range based on [min_bpp, max_bpp] target bitrate range, and timing's pixel clock
* and uncompressed bandwidth. * and uncompressed bandwidth.
*/ */
......
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
* Authors: AMD * Authors: AMD
* *
*/ */
#include <drm/drm_dsc.h>
#include "os_types.h" #include "os_types.h"
#include "rc_calc.h" #include "rc_calc.h"
...@@ -40,7 +41,8 @@ ...@@ -40,7 +41,8 @@
break break
void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, enum max_min max_min, float bpp) static void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc,
enum max_min max_min, float bpp)
{ {
int mode = MODE_SELECT(444, 422, 420); int mode = MODE_SELECT(444, 422, 420);
int sel = table_hash(mode, bpc, max_min); int sel = table_hash(mode, bpc, max_min);
...@@ -85,7 +87,7 @@ void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, enum ma ...@@ -85,7 +87,7 @@ void get_qp_set(qp_set qps, enum colour_mode cm, enum bits_per_comp bpc, enum ma
memcpy(qps, table[index].qps, sizeof(qp_set)); memcpy(qps, table[index].qps, sizeof(qp_set));
} }
double dsc_roundf(double num) static double dsc_roundf(double num)
{ {
if (num < 0.0) if (num < 0.0)
num = num - 0.5; num = num - 0.5;
...@@ -95,7 +97,7 @@ double dsc_roundf(double num) ...@@ -95,7 +97,7 @@ double dsc_roundf(double num)
return (int)(num); return (int)(num);
} }
double dsc_ceil(double num) static double dsc_ceil(double num)
{ {
double retval = (int)num; double retval = (int)num;
...@@ -105,7 +107,7 @@ double dsc_ceil(double num) ...@@ -105,7 +107,7 @@ double dsc_ceil(double num)
return (int)retval; return (int)retval;
} }
void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp) static void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp)
{ {
int *p = ofs; int *p = ofs;
...@@ -160,7 +162,7 @@ void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp) ...@@ -160,7 +162,7 @@ void get_ofs_set(qp_set ofs, enum colour_mode mode, float bpp)
} }
} }
int median3(int a, int b, int c) static int median3(int a, int b, int c)
{ {
if (a > b) if (a > b)
swap(a, b); swap(a, b);
...@@ -172,13 +174,25 @@ int median3(int a, int b, int c) ...@@ -172,13 +174,25 @@ int median3(int a, int b, int c)
return b; return b;
} }
void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_comp bpc, float bpp, int slice_width, int slice_height, int minor_version) static void _do_calc_rc_params(struct rc_params *rc, enum colour_mode cm,
enum bits_per_comp bpc, u8 drm_bpp,
bool is_navite_422_or_420,
int slice_width, int slice_height,
int minor_version)
{ {
float bpp;
float bpp_group; float bpp_group;
float initial_xmit_delay_factor; float initial_xmit_delay_factor;
int padding_pixels; int padding_pixels;
int i; int i;
bpp = ((float)drm_bpp / 16.0);
/* in native_422 or native_420 modes, the bits_per_pixel is double the
* target bpp (the latter is what calc_rc_params expects)
*/
if (is_navite_422_or_420)
bpp /= 2.0;
rc->rc_quant_incr_limit0 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0); rc->rc_quant_incr_limit0 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0);
rc->rc_quant_incr_limit1 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0); rc->rc_quant_incr_limit1 = ((bpc == BPC_8) ? 11 : (bpc == BPC_10 ? 15 : 19)) - ((minor_version == 1 && cm == CM_444) ? 1 : 0);
...@@ -251,3 +265,128 @@ void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_com ...@@ -251,3 +265,128 @@ void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_com
rc->rc_buf_thresh[13] = 8064; rc->rc_buf_thresh[13] = 8064;
} }
static u32 _do_bytes_per_pixel_calc(int slice_width, u8 drm_bpp,
bool is_navite_422_or_420)
{
float bpp;
u32 bytes_per_pixel;
double d_bytes_per_pixel;
bpp = ((float)drm_bpp / 16.0);
d_bytes_per_pixel = dsc_ceil(bpp * slice_width / 8.0) / slice_width;
// TODO: Make sure the formula for calculating this is precise (ceiling
// vs. floor, and at what point they should be applied)
if (is_navite_422_or_420)
d_bytes_per_pixel /= 2;
bytes_per_pixel = (u32)dsc_ceil(d_bytes_per_pixel * 0x10000000);
return bytes_per_pixel;
}
static u32 _do_calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz,
u32 bpp_increment_div)
{
u32 dsc_target_bpp_x16;
float f_dsc_target_bpp;
float f_stream_bandwidth_100bps;
// bpp_increment_div is actually precision
u32 precision = bpp_increment_div;
f_stream_bandwidth_100bps = stream_bandwidth_kbps * 10.0f;
f_dsc_target_bpp = f_stream_bandwidth_100bps / pix_clk_100hz;
// Round down to the nearest precision stop to bring it into DSC spec
// range
dsc_target_bpp_x16 = (u32)(f_dsc_target_bpp * precision);
dsc_target_bpp_x16 = (dsc_target_bpp_x16 * 16) / precision;
return dsc_target_bpp_x16;
}
/**
* calc_rc_params - reads the user's cmdline mode
* @rc: DC internal DSC parameters
* @pps: DRM struct with all required DSC values
*
* This function expects a drm_dsc_config data struct with all the required DSC
* values previously filled out by our driver and based on this information it
* computes some of the DSC values.
*
* @note This calculation requires float point operation, most of it executes
* under kernel_fpu_{begin,end}.
*/
void calc_rc_params(struct rc_params *rc, const struct drm_dsc_config *pps)
{
enum colour_mode mode;
enum bits_per_comp bpc;
bool is_navite_422_or_420;
u8 drm_bpp = pps->bits_per_pixel;
int slice_width = pps->slice_width;
int slice_height = pps->slice_height;
mode = pps->convert_rgb ? CM_RGB : (pps->simple_422 ? CM_444 :
(pps->native_422 ? CM_422 :
pps->native_420 ? CM_420 : CM_444));
bpc = (pps->bits_per_component == 8) ? BPC_8 : (pps->bits_per_component == 10)
? BPC_10 : BPC_12;
is_navite_422_or_420 = pps->native_422 || pps->native_420;
DC_FP_START();
_do_calc_rc_params(rc, mode, bpc, drm_bpp, is_navite_422_or_420,
slice_width, slice_height,
pps->dsc_version_minor);
DC_FP_END();
}
/**
* calc_dsc_bytes_per_pixel - calculate bytes per pixel
* @pps: DRM struct with all required DSC values
*
* Based on the information inside drm_dsc_config, this function calculates the
* total of bytes per pixel.
*
* @note This calculation requires float point operation, most of it executes
* under kernel_fpu_{begin,end}.
*
* Return:
* Return the number of bytes per pixel
*/
u32 calc_dsc_bytes_per_pixel(const struct drm_dsc_config *pps)
{
u32 ret;
u8 drm_bpp = pps->bits_per_pixel;
int slice_width = pps->slice_width;
bool is_navite_422_or_420 = pps->native_422 || pps->native_420;
DC_FP_START();
ret = _do_bytes_per_pixel_calc(slice_width, drm_bpp,
is_navite_422_or_420);
DC_FP_END();
return ret;
}
/**
* calc_dsc_bpp_x16 - retrieve the dsc bits per pixel
* @stream_bandwidth_kbps:
* @pix_clk_100hz:
* @bpp_increment_div:
*
* Calculate the total of bits per pixel for DSC configuration.
*
* @note This calculation requires float point operation, most of it executes
* under kernel_fpu_{begin,end}.
*/
u32 calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz,
u32 bpp_increment_div)
{
u32 dsc_bpp;
DC_FP_START();
dsc_bpp = _do_calc_dsc_bpp_x16(stream_bandwidth_kbps, pix_clk_100hz,
bpp_increment_div);
DC_FP_END();
return dsc_bpp;
}
...@@ -77,7 +77,10 @@ struct qp_entry { ...@@ -77,7 +77,10 @@ struct qp_entry {
typedef struct qp_entry qp_table[]; typedef struct qp_entry qp_table[];
void calc_rc_params(struct rc_params *rc, enum colour_mode cm, enum bits_per_comp bpc, float bpp, int slice_width, int slice_height, int minor_version); void calc_rc_params(struct rc_params *rc, const struct drm_dsc_config *pps);
u32 calc_dsc_bytes_per_pixel(const struct drm_dsc_config *pps);
u32 calc_dsc_bpp_x16(u32 stream_bandwidth_kbps, u32 pix_clk_100hz,
u32 bpp_increment_div);
#endif #endif
...@@ -27,8 +27,6 @@ ...@@ -27,8 +27,6 @@
#include "dscc_types.h" #include "dscc_types.h"
#include "rc_calc.h" #include "rc_calc.h"
double dsc_ceil(double num);
static void copy_pps_fields(struct drm_dsc_config *to, const struct drm_dsc_config *from) static void copy_pps_fields(struct drm_dsc_config *to, const struct drm_dsc_config *from)
{ {
to->line_buf_depth = from->line_buf_depth; to->line_buf_depth = from->line_buf_depth;
...@@ -100,34 +98,13 @@ static void copy_rc_to_cfg(struct drm_dsc_config *dsc_cfg, const struct rc_param ...@@ -100,34 +98,13 @@ static void copy_rc_to_cfg(struct drm_dsc_config *dsc_cfg, const struct rc_param
int dscc_compute_dsc_parameters(const struct drm_dsc_config *pps, struct dsc_parameters *dsc_params) int dscc_compute_dsc_parameters(const struct drm_dsc_config *pps, struct dsc_parameters *dsc_params)
{ {
enum colour_mode mode = pps->convert_rgb ? CM_RGB :
(pps->simple_422 ? CM_444 :
(pps->native_422 ? CM_422 :
pps->native_420 ? CM_420 : CM_444));
enum bits_per_comp bpc = (pps->bits_per_component == 8) ? BPC_8 :
(pps->bits_per_component == 10) ? BPC_10 : BPC_12;
float bpp = ((float) pps->bits_per_pixel / 16.0);
int slice_width = pps->slice_width;
int slice_height = pps->slice_height;
int ret; int ret;
struct rc_params rc; struct rc_params rc;
struct drm_dsc_config dsc_cfg; struct drm_dsc_config dsc_cfg;
double d_bytes_per_pixel = dsc_ceil(bpp * slice_width / 8.0) / slice_width; dsc_params->bytes_per_pixel = calc_dsc_bytes_per_pixel(pps);
// TODO: Make sure the formula for calculating this is precise (ceiling vs. floor, and at what point they should be applied)
if (pps->native_422 || pps->native_420)
d_bytes_per_pixel /= 2;
dsc_params->bytes_per_pixel = (uint32_t)dsc_ceil(d_bytes_per_pixel * 0x10000000);
/* in native_422 or native_420 modes, the bits_per_pixel is double the target bpp
* (the latter is what calc_rc_params expects)
*/
if (pps->native_422 || pps->native_420)
bpp /= 2.0;
calc_rc_params(&rc, mode, bpc, bpp, slice_width, slice_height, pps->dsc_version_minor); calc_rc_params(&rc, pps);
dsc_params->pps = *pps; dsc_params->pps = *pps;
dsc_params->pps.initial_scale_value = 8 * rc.rc_model_size / (rc.rc_model_size - rc.initial_fullness_offset); dsc_params->pps.initial_scale_value = 8 * rc.rc_model_size / (rc.rc_model_size - rc.initial_fullness_offset);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment